11.A person walks 2 miles and stops to rest. She continues in the same direction
for another 2 miles.
a. What is her distance?
b. What is her displacement?

Answers

Answer 1

Answer:

A. Her distance is 4 miles.

B. Her displacement is positive.

Explanation:

She traveled 2 miles and then 2 miles so 2 + 2 = 4.

Displacement is the change in direction but she didn't change direction and continued in the same direction so the displacement would be positive.


Related Questions

If for a given pair of media CR
, CY
and CB
are the critical angles for red, yellow and blue colours respectively,
then

Answers

CR​ < CY​ < CB​

Which factors affect the critical angle for a given pair of media?

The factors which affect the critical angle are

(a) The colour (or wavelength) of light

(b) The temperature

(i) Effect of colour of light: The critical angle for a pair of media is less for the violet light and more for the red light. Thus the critical angle increases with the increase in wavelength of light.

(ii) Effect of temperature: The critical angle increases with increase in temperature because on increasing temperature of medium, its refractive index decreases.

According to the question,

μ 1​ sinCR​ =1

μ 2​ sinCY =1

μ 3​ sinCB​ =1

μ 1​ > μ 2​  and μ 2​ > μ 3

⟹μ 1​ > μ 2​ > μ 3

CR​ < CY​ < CB​

Thus,

The critical angle increases with the increase in wavelength of light.

Learn more about wavelength of light here:

https://brainly.com/question/27557868

#SPJ1

on which factors does friction depend ?​

Answers

Answer:

It depends on 2 factors

the nature of the materials

the normal force.

Explanation:

It depends on 2 factors

the nature of the materials that are in friction and the treatment that they have followed. This factor is expressed by a numerical value called the coefficient of friction or friction.

the force exerted by one body on the other, that is, the normal force.

During spring semester at MIT, residents of the parallel buildings of the East Campus dorms battle one another with large catapults that are made with surgical hose mounted on a window frame. A balloon filled with dyed water is placed in a pouch attached to the hose, which is then stretched through the width of the room. Assume that the stretching of the hose obeys Hooke's law with a spring constant of 88.0 N/m. If the hose is stretched by 4.20 m and then released, how much work does the force from the hose do on the balloon in the pouch by the time the hose reaches its relaxed length

Answers

Answer:

The work done on the hose by the time the hose reaches its relaxed length is 776.16 Joules

Explanation:

The given spring constant of the of the spring, k = 88.0 N/m

The length by which the hose is stretched, x = 4.20 m

For the hose that obeys Hooke's law, and the principle of conservation of energy, the work done by the force from the hose is equal to the potential energy given to the hose

The elastic potential energy, P.E., of a compressed spring is given as follows;

P.E. = 1/2·k·x²

∴ The potential energy given to hose, P.E. = 1/2 × 88.0 N/m × (4.20 m)²

1/2 × 88.0 N/m × (4.20 m)² = 776.16 J

The work done on the hose = The potential energy given to hose, P.E. = 776.16 J

How much work is done by an engine to accelerate an
800 kg vehicle from 10 m/s to 20 m/s?

Answers

We are unable to directly determine the work performed by the engine because the distance over which the force acts is unknown.

What work is involved in accelerating an 800 kg automobile from 5 meters per second to 10 meters per second?

This indicates that the effort expended to increase the car's speed will be equivalent to the change in kinetic energy of the vehicle. Thus, 30 kJ of effort must be performed.

What is the recipe for getting stuff done?

The work W is equal to the force f times the distance d, or W = fd, to mathematically describe this idea.

To know more about work visit:-

https://brainly.com/question/18094932

#SPJ1

A 264 kg boulder is pulled with a rope across a field by a strong man. If the man uses a force of 2,452 N to cause the boulder to accelerate across the field. The coefficient of friction is 0.53. How fast does the strong man accelerate the boulder?

Answers

The strong man accelerates the boulder of mass 264 kg at 4.1 m / s² if he uses a force of 2452 N.

W = m g

W = Weight

m = Mass

g = Acceleration due to gravity

m = 264 kg

g = 9.8 m / s²

W = 264 * 9.8

W = 2587.2 N

F = 2452 N

W = Normal force, N = 2587.2 N

\(f_{k}\) = μ N

\(f_{k}\) = Kinetic frictional force

μ = Co-efficient of kinetic friction = 0.53

\(f_{k}\) = 0.53 * 2587.2

\(f_{k}\) = 1371.22 N

\(F_{x}\) = m a

F - \(f_{k}\) = m a

2452 - 1371.22 = 264 * a

a = 1080.78 / 264

a = 4.1 m / s²

Therefore, the strong man accelerates the boulder at 4.1 m / s²

To know more about acceleration

https://brainly.com/question/12550364

#SPJ1

John accidentally drops his keys off the balcony at his apartment. John's friend Tony just happens to walk by at that moment and picks up the keys to throw them back up to John. If John is 5.33 meters above the sidewalk where Tony is, and Tony throws at 18 m/s at a 40 degree angle above the horizontal, will the keys make it back to John?

Answers

Answer:

the keys will make it back to John.

Explanation:

In order to find out if the keys will reach John or not, we can use the formula of projectile motion to find the maximum height reached by the keys:

H = V²Sin²θ/2g

where,

V = Launch Speed = 18 m/s

θ = Launch Angle = 40°

g = 9.8 m/s²

Therefore,

H = (18 m/s)²[Sin 40°]²/(2)(9.8 m/s²)

H = 6.83 m

Hence, the maximum height that can be reached by the projectile or the keys is greater than the height of John's Balcony(5.33 m).

Therefore, the keys will make it back to John.

Yes, Key will surely reach back to John.

Given that;

Velocity v = 18 m/s

θ Angle = 40°

g = 9.8 m/s²

Computation:

By using maximum height formula

H = [v²][sin²θ]/2g

H = (18)²[Sin 40°]²/[(2)(9.8)]  

H = 6.83 m

6.83 meter is more then 5.33 meter,

So,

Key will surely reach back to John.

Learn more:

https://brainly.com/question/10726356?referrer=searchResults

Which term best describes the form of beryllium shown

Answers

Answer:

✓ Ion

Explanation:

Which term BEST describes the form of beryllium shown? Protons=4 Neutrons=5 Electrons=2

✓ Ion

Question 2
What measurements are needed to calculate your BMI?

A. Weight and shoe size
B. Height and weight
C. heart and breathing rate per minute
D. core temperature and height


Answers

Answer:

B

Explanation:

A car has an acceleration of -5 m/s^2. Describe the car’s motion

Answers

Explanation:

because the acceleration is negative, this indicates a deceleration (or slowing down) . Hence we can say that:

The car is decelerating (slowing down), i.e its velocity is decreasing, at a constant rate of 5m/s².

which has an effect on acceleration (speeding up, slowing down, or changing direction)?

Answers

Explanation:

If acceleration points in the same direction as the velocity, the object will be speeding up. The acceleration points in the same direction as the velocity if the car is speeding up, and in the opposite direction if the car is slowing down.

which has an effect on acceleration (speeding up, slowing down, or changing direction)?

The psychological school of thought called ________ emphasized how mental processes help people adapt to their environment.

Answers

The psychological school of thought called functionalism emphasized how mental processes help people adapt to their environment.

Functionalism was a prominent psychological school of thought that emerged in the late 19th and early 20th centuries. It aimed to understand the mind by focusing on its purpose and function rather than its structure. Functionalists believed that mental processes, such as perception, memory, and thinking, served adaptive functions that allowed individuals to successfully navigate and adapt to their environment. They argued that the mind should be studied in terms of how it helps individuals survive, thrive, and achieve their goals in the real world. Functionalism was influenced by evolutionary theory, which emphasized the adaptive nature of behaviors and mental processes. It sought to explain how mental processes evolved and how they contributed to an individual's ability to adapt to changing environmental demands. By understanding the functions of different mental processes, functionalists aimed to gain insights into human behavior and improve practical applications in areas such as education, industry, and therapy.

In summary, functionalism, as a psychological school of thought, placed a strong emphasis on how mental processes facilitate individuals' adaptation to their environment. It focused on understanding the purpose and function of these processes and how they contributed to an individual's ability to survive and thrive in the real world.

To learn more about functionalism refer:

https://brainly.com/question/26203347

#SPJ11

Why doesn’t the calculated value of kinetic energy match the measured kinetic energy of the rock?

Answers

The calculated value of kinetic energy doesn’t match the measured kinetic energy of the rock because the calculated value of kinetic energy is based on theoretical calculations, whereas the measured value is based on practical observations.

Kinetic energy is the energy possessed by an object in motion. It depends on the mass and velocity of the object. The formula for kinetic energy is given by KE = 1/2 mv², where m is the mass of the object and v is its velocity.The calculated value of kinetic energy can be found by using this formula. However, this value is based on theoretical calculations, assuming that the object is moving in a vacuum with no resistance from air or other factors. In reality, there are several factors that can affect the measured value of kinetic energy. These factors include:Friction: The rock may encounter friction as it moves, which can reduce its velocity and therefore its kinetic energy.

Sound: When the rock strikes the ground, some of its kinetic energy may be converted into sound energy and lost.So, even though the calculated value of kinetic energy may be accurate in theory, the measured value may be different due to the influence of several real-world factors.This difference between the calculated and measured values of kinetic energy highlights the importance of conducting experiments and making practical observations.

learn more about  kinetic energy

https://brainly.com/question/8101588

#SPJ11

What is the minimum number of overload units such as heaters, trip coils, or thermal cutouts allowed for a three-phase AC motor's protection

Answers

The minimum number of overload units for a three-phase AC motor's protection is THREE (3). It is a polyphase motor.

Three-phase motors are polyphase motors, which can be induction motors or synchronous motors.

A three-phase motor is organized to run on three-phase alternating current (AC) electrical power, which is required for diverse industrial devices that use a lot of electrical energy.

These motors (three-phase motor) are composed of a stator (the outer part), a rotor (rotating part), and the enclosure (the external skeleton).

Learn more about three-phase motors here:

https://brainly.com/question/14329442

*need help ASAP *
Select the correct answer.
Read lines 44-45 from The Winter's Tale.
PAULINA: Tis time; descend; be stone no more; approach;
Strike all that look upon with marvel.
Which detail from "Pygmalion and Galatea" provided the source material for these lines from Shakespeare's play?

A.Pygmalion falling in love with his statue
B.Venus watching over the sleep of Adonis
C. Pygmalion adorning his statue with jewels
D. Venus giving life to Pygmalion's statue

Answers

Answer: D. Venus giving life to Pygmalion's statue

Explanation: Hi! I got it right on Edmentum. Hope this helps! <3

10. several of the star names appear twice followed by an a or a b. these are mostly double stars - two stars which are revolving around each other together in space. they seem to frequently have similar spectral types. can you guess why they have similar spectral types?

Answers

The reason why double stars have similar spectral types is because they are typically located close to each other and have a similar age and composition. Double stars are also gravitationally bound to each other, which means they have similar motion and orbits and therefore have similar spectral types.

Double stars are formed when two stars come close enough together to form a binary system, which means that the stars will revolve around each other in an orbit, usually around a common center of gravity. This gravitational pull causes the stars to both to have a similar age and composition, since they were formed from the same material.

This, in turn, leads to the stars having similar spectral types, which can be identified by their color and the types of light they emit. Furthermore, double stars typically have a common center of mass, which allows them to have similar motions and orbits.

This again leads to the stars having similar spectral types, since they are subject to similar forces and temperatures. As a result, double stars can often be identified by their similar spectral types, which can be determined by looking at their color and the types of light they emit.

To know more about  double stars, refer here:

https://brainly.com/question/13919734#

#SPJ11

the range of possible frequencies of radiation is called the ______ spectrum.

Answers

The range of possible frequencies of radiation is called the electromagnetic spectrum.

What is the electromagnetic spectrum and how is it classified?

The electromagnetic spectrum is the variety of all possible frequencies of electromagnetic radiation. This consists of radio waves, microwaves, infrared radiation, seen mild, ultraviolet radiation, X-rays, and gamma rays. The spectrum is classed based totally at the frequency and wavelength of the radiation, with each sort of radiation occupying a specific area of the spectrum. The class is primarily based on their capability to tour thru one of a kind substances and their interactions with matter. The distinct areas of the spectrum have an expansion of realistic applications, from conversation technology to medical imaging.

To know more about Electromagnetic Spectrum visit:

https://brainly.com/question/23727978

#SPJ4


Identify at least two ways in which heavy rain can affect the efficiency of
waste water treatment facilities.
I

Answers

Rain water that mixes with sewage has two effects on treatment plant performance. The first issue is that it thins out the concentration of sewage. This may sound like a good thing but it's not. Wastewater treatment is a biological process and like everything that involves living things it requires a regular food supply to survive. If you thin out the food supply you can expect the biology to perform poorly. Even so, this generally doesn't cause significant problems. Instead it just makes normal performance a little worse then returns to normal once the flow goes back down.

Hot liquids and gasses move in one direction

Answers

Answer:

some times the glass breaks

Explanation:

a a horizontal, uniform board of weight 125 n and length 4 m is supported by vertical chains at each end. a person weighing 500 n is sitting on the board. the tension in the right chain is 250 n. what is the tension in the left chain? 375 n

Answers

If a horizontal, uniform board of weight 125 N and length 4 m is supported by vertical chains at each end and a person weighing 500 N is sitting on the board, the tension in the right chain is 250 N then the tension in the left chain is 375 N.

A horizontal, uniform board of weight 125 N and length 4 m is supported by vertical chains at each end. A person weighing 500 N is sitting on the board.

The tension in the right chain is 250 N. What is the tension in the left chain?

The tension in the left chain is 375 N.

How to find the tension in the left chain?

Here, the weight of the board is W1= 125 N

Weight of the person sitting on the board is W2 = 500 N

Length of the board is L = 4 m

Tension in the right chain is T1 = 250 N

Tension in the left chain is T2

The sum of the tension in both chains will be equal to the weight of the board and the person sitting on the board. i.e., T1 + T2 = W1 + W2.

T2 + 250 N = 125 N + 500 N

T2 = 625 N - 250 N

T2 = 375 N

Therefore, the tension in the left chain is 375 N.

To learn more about force refer to: brainly.com/question/30377023

#SPJ11

what is the weight of a 15 kg object

Answers

to get weight multiply Mass by 9.8

weight =9.8x15=147N

a cinder block is sitting on a platform 20 m high. it has a mass of 79 kg. the block has potential energy. calculate it.

Answers

The potential energy (PE) of the 79 kg cinder block sitting on a 20 m high platform is 15,444 J (joules).

To calculate the potential energy of the cinder block, you can use the formula PE = mgh, where "m" is the mass, "g" is the acceleration due to gravity (9.8 m/s²), and "h" is the height.

First, find the product of the mass (79 kg) and the acceleration due to gravity (9.8 m/s²): 79 kg * 9.8 m/s² = 774.2 kg*m/s² (also known as newtons, N).

Next, multiply this value by the height (20 m): 774.2 N * 20 m = 15,444 J. Therefore, the potential energy of the cinder block is 15,444 J.

To know more about gravity click on below link:

https://brainly.com/question/14874038#

#SPJ11

Can we get less ads please i don’t like this

Answers

I hope we can! I dont like the ads either! they are horrible on these appsn

what can i do to learn more about neutrino telescopes

Answers

Answer:

You could do some research on them or you could also find books about them

Explanation:I hope you have/had an amazing day!!

A brave but inadequate rugby player is pushed backward by an opposing player who exerts a force of 800.0 N on him. The mass of the losing player plus his equipment is 90.0 kg, and he is accelerating backward at 1.2 m divided by s squared. What is the force of friction between the losing player’s feet and the grass?

Answers

The force of friction between the losing player’s feet and the grass is 692 N.

What is the force of friction?

The force of friction between the losing player’s feet and the grass is calculated by applying Newton's second law of motion as shown below.

F(net) = ma

where;

F(net) is the net force on the playerm is the mass of the playera is the acceleration of the player

F - Ff = ma

where;

F is the applied forceFf is the force of friction

800 - Ff = 90 x 1.2

800 - Ff = 108

Ff = 800 - 108

Ff = 692 N

Learn more about force of friction here: https://brainly.com/question/4618599

#SPJ1

which process receives geo thermal energy naturally​

Answers

Well what causes the energy is from solar and chemical
Hot water can be released through geysers, hot springs, steam vents, underwater hydrothermal vents, and mud pots.

state newtons second law of motion from the equation f: ma​

Answers

Newton's Second Law of Motion states "The rate of change of momentum of a body is directly proportional to the applied unbalanced force in the direction of force".

Using the example from class, find the value of the capacitance reactance being used when the power factor given is 0.95.

Answers

The value of the capacitance reactance being used when the power factor given is 0.95 is 3.0424349222966542 ohms.

The power factor is a measure of how efficiently electrical power is being used.

A power factor of 1 means that all of the electrical power is being used for useful work, while a power factor of less than 1 means that some of the electrical power is being wasted.

A capacitor can be used to improve the power factor of an AC circuit by providing a reactive load that cancels out the inductive load of the circuit. The value of the capacitance reactance needed to improve the power factor to 0.95 can be calculated using the following formula:

XC = 1 / tan(acos(PF))

where PF is the power factor.

In this case, the power factor is 0.95, so the capacitance reactance is:

XC = 1 / tan(acos(0.95)) = 3.0424349222966542 ohms

The value of the capacitance reactance being used when the power factor given is 0.95 is 3.0424349222966542 ohms. This can be calculated using the formula given above.

To learn more about capacitance here brainly.com/question/31871398

#SPJ11

A uniform metal bar 100cm long balances at 20cm mark when a mass of 1.5kg is attached at 0cm mark calculate the weight of the bar (take g=10n/kg)

Answers

Answer:

1.6 ml

Explanation:

All of the following may be the result of an inelastic collision EXCEPT:
A. permanent change in the shape of the colliding bodies.
B. kinetic energy released as sound.
C. colliding bodies stick to one another.
D.zero loss of kinetic energy

Answers

Answer: D) zero loss of kinetic energy

Explanation:

What was the main reason for the Maoist uprising in Nepal?

Answers

Answer:

For overthrowing the Nepalese monarchy and establishing people's republic

Other Questions
What economic alliance is pictured in the map? A square has an area of 49 square inches. how long are its sides Ahmed thinks: "16 = 4 so 160 = 40" he is incorrect.a. show that 160 is between 12 and thirteen is answered. the answer is 12.649110641.b. write down the number of which 40 is the square root. this is what i want you guys to do please Many preachers included the concept of __________ in their messages meant to spread Christianity during the Second Great Awakening of the 1800s.A.manicheismB.monismC.perfectionismD.creationism n + 2 = -14 -n Show work (COL-1, COL-2} Find dy/dx ify=x O x (2 + Inx) / 2 O 2 + In x / 2x O x (1 + In x) / 2x O x (2 (2 + In x) / how many lattice paths are there from (2, 1) to (24, 30) that pass through the point (8, 10) but do not pass through either of the points (7, 7) and (16, 25)? Young women who belonged to the 1960s counterculture movement often got married and settled down at a younger age than their parents had. pursued nontraditional roles instead of becoming wives and mothers. rejected careers and professional employment to become homemakers. took part in violent, aggressive antiwar protests and demonstrations. Solve for x in the diagram Please. which ia correct punctuation and grammar? 1. This group, known as the Navajo Code Talkers, took part in every assault the U.S. Marines conducted from 1942-1945. Explain: A. This group, known as B. This group, which was known as. C. This group, known by D. This group; known as The U.S. Sanitary Commission:a) was the first major organization to be run entirely by womenb) raised money for the amilies of soldiers on both sidesc) coordinated war donations on the northern home frontd) was the nation's first garbage collection agency What do I put in blanks explain your answer giving brainiest product-focused creative visuals achieves business results more effciently. true false Suppose there is just one type of illness, which has a .1 probability of occurring. Consider two insurance policies: (a) a free care policy, where the insurer covers the full cost of all care that a sick individual demands, and (b) a policy with a 20 person coinsurance rate, where the individual pays 10 percent and the insurer pays 80 percent of the cost of care. A sick individual will choose 6 days of hospital care under policy a and 4 days of hospital care under policy b. Each day of hospital care costs $3000. (Assume that there is no evidence that health outcomes are better for those with longer hospital stays.) What is the actuarially fair premium for policy a? Your answer should be a dollar amount, without a dollar sign. need answer WHHAHAAHAHAHHA since students are screened early and their progress is assessed frequently to see if they are making adequate progress, rti is often referred to as a/an ________ model. The x value means nothing on its own- it is used to find the probability that, assuming the hypothesis is true, the observed data set could have resulted from random fluctuations. A low probability suggests that the observed data are not consistent with the hypothesis, and thus the hypothesis should be rejected. A standard cutoff point used by biologists is a probability of 0.05(5%) . If the probability corresponding to the x value is 0.05 or less, the differences between observed and expected values are considered statistically significant and the hypothesis (that the genes are unlinked) should be rejected. If the probability is above 0.05 , the results are not statistically significant; the observed data are consistent with the hypothesis. To find the probability, locate your X value in the X Distribution Table in Appendix F . The "degrees of freedom" (df) of your data set is the number of categories (here, 4 phenotypes) minus 1, so df -3 .(b) The column headings for these values show the probablity range for your x number. Based on whether there are nonsignificant (p>0.05) or significant (p 0.05) differences between the observed and expected values, are the data consistent with the hypothesis that the two genes are unlinked and assorting independently, or is there enough evidence to reject this hypothesis? what is the first step when estimating the quotient of 36.6 / 5 1. Factor and simplify: cos xcsc x-cosxcot x Name the types of products the United States used to first enter the area of technology