Answer:
113.541
Explanation:
Osmotic Pressure Formula:
P = i x Molarity x 0.0821 x Temp. in Kelvins
2 x 2.36 x .0821 x 293 = 113.541
i = the charge of ions the compound will dissociate into.
Cr(NO3) --> Cr+1 + NO3-1
Both ions have 1 charge. This makes 2.
how much of 6% saline solution should kent mix with 70 cubic centimeters of a 16% saline solution to produce 11% saline solution
70 cubic centimeters of 6% saline solution should kent mix with 70 cubic centimeters of a 16% saline solution to produce 11% saline solution
To determine the amount of a 6% saline solution that should be mixed with 70 cubic centimeters of a 16% saline solution to obtain an 11% saline solution, we can use a mixture equation based on the principle of conservation of mass.
Let's assume x represents the volume of the 6% saline solution to be added in cubic centimeters.
The amount of salt (in grams) in the 16% saline solution is given by:
Amount of salt in 16% solution = 70 cubic centimeters * 0.16 (salt concentration)
The amount of salt (in grams) in the 6% saline solution to be added is given by:
Amount of salt in 6% solution = x cubic centimeters * 0.06 (salt concentration)
The total amount of salt (in grams) in the resulting 11% saline solution is given by:
Amount of salt in resulting solution = (70 + x) cubic centimeters * 0.11 (salt concentration)
According to the principle of conservation of mass, the amount of salt in the initial solution must be equal to the amount of salt in the resulting solution. Therefore, we can set up the following equation:
Amount of salt in 16% solution + Amount of salt in 6% solution = Amount of salt in resulting solution
70 * 0.16 + x * 0.06 = (70 + x) * 0.11
11.2 + 0.06x = 7.7 + 0.11x
0.11x - 0.06x = 11.2 - 7.7
0.05x = 3.5
x = 3.5 / 0.05
x = 70
Therefore, Kent should mix 70 cubic centimeters of the 6% saline solution with the 70 cubic centimeters of the 16% saline solution to produce an 11% saline solution.
To know more about saline solution here
https://brainly.com/question/32838167
#SPJ4
Boron has an average atomic mass of 10.81. One isotope of boron has a mass of 10.012938 and a relative abundance of 19.80 percent. The other isotope has a relative abundance of 80.20 percent.
What is the mass of that isotope? Report to two decimal places.
amu
Answer:
11.01
Explanation:
because yes :)
chemistry homework helpHeavy metals such as calcium can be extracted from water by a precipitation reaction. Hard water has a Ca2+ ion concentration around 4.24x10^-3 M. A solution of sode ash(sodium carbonat, Na2CO3) is used to precipitate the calcium and soften the water. The precipiatie can be removed by filtration. a. write the complete balanced equation and net ionic equation tha occurs when sodium carbonate is added to hard water. Circle the precipitate. B. A 100mL sode ash solution was prepared with 5.0g of sodium carbonate/ MW=106 g/mol what is the concentration in M of the solution? What is the concentration of sodium ions?Message
Answer
Explanation
Note: The reaction is a double replacement reaction in which two soluble ionic compounds react in an aqueous solution to form an insoluble solid.
In this case, a solution of sodium carbonate, Na2CO3, will contain
\(undefined\)The complete balanced equation that occurs when sodium carbonate is added to hard water is
Round your answer to the correct number of significant figures or decimal places: 0.005-0.0007=
Answer:
0.0043
0.004 if to one significant figure
0 to one decimal place.
Construct a scientific argument to explain what happened in the environment to give one type of moth an advantage AND why was it an advantage?
(Make sure to answer both questions--what
AND why.)
Answer:
Explanation: One example of a scientific argument explaining the advantage of a particular type of moth is the case of the peppered moth (Biston betularia) in England during the Industrial Revolution. Before the widespread pollution of the Industrial Revolution, the light-colored form of the peppered moth was more common because it was well camouflaged against lichen-covered tree bark. However, as industrialization caused air pollution and killed lichens, the bark of trees became darker, making the dark-colored form of the moth more camouflaged and therefore more successful at avoiding predation. This change in the environment gave the dark-colored moth an advantage over the light-colored moth because it was better camouflaged against the new background, making it less likely to be eaten by predators such as birds.
The advantage of the dark-colored form of the peppered moth was due to natural selection, which is the process by which organisms with traits that are better suited to their environment are more likely to survive and reproduce, passing on their advantageous traits to their offspring. In this case, the dark-colored moths had an advantage because they were more likely to survive and reproduce in the polluted environment, passing on their genes for dark coloration to the next generation. Over time, the frequency of the dark-colored form increased, while the light-colored form decreased, demonstrating the power of natural selection to shape the evolution of a species in response to environmental changes.
Contractile vacuoles are organelles that maintain water balance by pumping excess water out of some single-celled pond organisms. In humans, the kidney is an organ chiefly involved in maintaining water balance. These facts best illustrate that.
These facts serve as the best examples of how the tissues, organs, and organ systems in all living things collaborate to maintain homeostasis because contractile vacuoles are organelles that regulate water balance
Homeostasis is the term used to describe the body's need to achieve and preserve a specific state of equilibrium. A physiologist by the name of Walter Cannon first used the term in 1926. The tendency of the body to keep internal conditions, like blood sugar and temperature, at essentially constant and stable levels is known as homeostasis.
Between cells and an entire organ, there is a biological organisational level called tissue. An assembly of comparable cells and their extracellular matrix from the same origin that work together to perform a particular function is referred to as a tissue.
Learn more about homeostasis here
https://brainly.com/question/12221049
#SPJ4
Experimental data are collected as: x[100]={1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100}; y[100]={-92.3973,14.0677,98.9626,49.6151,111.88,-38.7967,52.1535,-101.325,65.6111,125.129,151.762, -123.132,-41.8744,-39.3356,-99.7856,-128.881,58.5477,-111.692,-75.3057,4.4723,-100.051,169.051, -15.6953,58.3125,147.346,10.9835,42.3421,166.697,-105.534,-90.2199,151.189,130.022,-8.1448,-51.3493, 164.427,119.154,-99.2704,155.986,133.212,118.035,13.1819,139.678,81.5178,-12.4377,-11.7671,146.627, -25.787,107.25,19.8867,15.6437,112.871,122.552,8.42037,-10.1364,146.682,178.531,203.565,-70.7871, 171.256,-50.6232,193.836,-34.7733,-68.9564,25.3423,75.6537,21.5484,46.5259,-64.22,-13.5792, 74.9213,-26.6872,30.5302,169.534,-36.7224,65.4419,113.978,68.1137,181.414,127.76,145.447,75.5486, 164.201,169.504,110.07,96.713,114.974,155.46,2.72803,-59.9407,13.426,29.9344,-11.052,176.639, 162.505,-18.3784,184.418,234.104,127.227,145.18,0.440172}; Obtain the regression line in the form of y = a x + b.
hi myself thx for the answers
7. True or false. Where air masses collide, weather changes
Answer:true
Explanation:
Most laboratory chemical spills are cleaned up in a similar manner, but acid and base spills require an extra step. What is this extra step?.
The extra step taken when cleaning up an acid or base spill is :
Neutralizing the Acid/base spill with with a weaker base such as sodium Bicarbonate or weak acid respectivelyAcid and base spills
Acid and Base spills are treated with an extra caution during cleanup to prevent injury to skin and this is because strong acids are;
very corrosive and Cause serious skin damages when one is exposed to it directly.After neutralization, clean up the spill with a towel ( usually paper towel ) and avoid using a strong base to neutralize a strong acid as well.
Hence we can conclude that Neutralizing the Acid/base spill with with a weaker base such as sodium Bicarbonate or weak acid respectively is the extra step.
Learn more about chemical spills : https://brainly.com/question/609930
il give brainly and 50 points if u answer my question
Answer: Whats ur Question?
Explanation:
What is the percent increase in wind energy from 2006 to 2010 % increase= (( final number - initial number) divided by initial number) x100
a- 4%
b- 232%
c-7%
d-175%
Answer:
b- 232%
Explanation:
Renewable energy consumption by energy source in 2006 = 6.659 quadrillion Btu
Renewable energy consumption by energy source in 2010 = 8.049 quadrillion Btu.
In 2006, wind energy = 4%
∴ wind energy = 4% x 6.659 = 0.26636
In 2010, wind energy = 11%
∴ wind energy = 11% x 8.049 = 0.88539
∴ Percent increase = (final number - initial number) ÷ (initial number) x 100
% increase = [(0.88539 - 0.26636) ÷ 0.26636} x 100 = 232.4035% ≈ 232%.
Answer = 232%.
an unknown liquid occupies a volume of 5ml and has a mass of 40 grams. Find its density
Answer:
8000 kilogram/cubic meter
Explanation:
I used an online calculator.
Hope I helped!
The barometer indicates the pressure is 1520.0 mm Hg: What is this pressure expressed in atmospheres? 0 A. 2.030x10^5atm B. 2.000atm C.380.0atm D. 1520.atm
The pressure of 1520.0 mmHg is equivalent to 2.00 atm, which is answer choice B.
The pressure measurement is a key parameter in various fields, including chemistry, physics, engineering, and meteorology. Different units are used to express pressure, including millimeters of mercury (mmHg) and atmospheres (atm).
In the given problem, the pressure is measured as 1520.0 mmHg using a barometer. To express this pressure in atmospheres, we need to use a conversion factor. The conversion factor between mmHg and atm is:
1 atm = 760 mmHg
This means that to convert pressure from mmHg to atm, we need to divide the pressure value in mmHg by 760.
Using this conversion factor, we can express the given pressure of 1520.0 mmHg in atm:
1520.0 mmHg ÷ 760 mmHg/atm = 2.00 atm
to know more about barometer refer here
https://brainly.com/question/2856885#
#SPJ11
4. Describe the landforms created at a subducting plate boundary and those created
at a convergent plate boundary between two continental plates. Explain why the
landforms are different.
Answer:Plate Tectonics : Different Plate Boundaries Create Different Landforms and ... Plate Boundary: CONVERGENT ... As the MORE DENSE oceanic plate (OP) subducts under ... Illustration of what is happening ... Two continental plates (CP) move away from each other ... Sea Floor spreading occurs at these mid-ocean ridges.
Explanation:
The landforms created in the subducting plate boundary are mid ocean ridges, fold mountains and islands. Volcanoes and earth quakes are common in these regions.
What is convergent boundary?Plate boundaries are regions of intersections between two tectonic plates. There are three different type of plate boundaries, namely convergent boundaries, divergent boundaries and transform boundaries.
In convergent plate boundaries, two tectonic plates moves close to each other and converge. These plate boundaries gives rise to different types of land forms such as fold mountains, islands etc.
Earthquakes and volcanoes are common in convergent plate boundaries. These type of plate movement is caused by the convection currents in the mantle.
Find more on convergent boundaries:
https://brainly.com/question/1114405
#SPJ2
30. Cohesion, surface tension, and adhesion are the properties of water molecules that ________. A) increase when temperature increases B) increase when pH increases C) are a result of hydrogen bonding D) are a result of polar covalent bonding
Answer:
C) are a result of hydrogen bonding
Explanation:
Cohesion, surface tension, and adhesion are the properties of water molecules that are a result of hydrogen bonding.
Calculate the difference in binding energy per nucleon for the isobars 23/11 Na (23 being the mass number and 11 being atomic number) and 23/12 Mg.
The difference in binding energy per nucleon between 23/11 Na and 23/12 Mg can be calculated by finding the total binding energy for each isobar and dividing it by the respective number of nucleons.
To calculate the difference in binding energy per nucleon between the isobars 23/11 Na and 23/12 Mg, we need to find the total binding energy for each isobar and then divide it by the respective number of nucleons.
The atomic mass of 23/11 Na is 23, which means it has 23 nucleons (protons and neutrons). The atomic number is 11, indicating it has 11 protons.
The atomic mass of 23/12 Mg is also 23, so it has 23 nucleons. However, the atomic number is 12, indicating it has 12 protons.
We can use the equation:
Binding Energy per Nucleon = (Total Binding Energy) / (Number of Nucleons)
To find the total binding energy, we can consult a table or use an approximate average value. Let's assume the average binding energy per nucleon for both elements is 8.5 MeV (million electron volts).
For 23/11 Na:
Binding Energy per Nucleon = (Total Binding Energy of Na) / (Number of Nucleons)
= (8.5 MeV) / (23 nucleons)
For 23/12 Mg:
Binding Energy per Nucleon = (Total Binding Energy of Mg) / (Number of Nucleons)
= (8.5 MeV) / (23 nucleons)
The difference in binding energy per nucleon can then be calculated by subtracting the value for Na from the value for Mg.
learn more about binding energy here:
https://brainly.com/question/32197843
#SPJ11
What is a characteristic of straight chained alkanes?
●They have one or more rings of carbon atoms.
●They have carbon atoms that are double-bonded to other carbon atoms. ● They have more than two carbons that are bonded to only one other carbon. ●They have carbons bonded in a single row from one end of the molecule to the other end of the molecule.
Answer:
● They have more than two carbons that are bonded to only one other
Explanation:
They have carbons bonded in a single row from one end of the molecule to the other end of the molecule. ... The straight-chain alkane has two more hydrogen atoms than the cycloalkane
Answer:
D. They have carbons bonded in a single row from one end of the molecule to the other end of the molecule.
Explanation:
I got it wrong when I chose C - They have more than two carbons that are bonded to only one other carbon. So yeah p.s UNUS ANNUS
1. Explain in detail the neoclassical view of economics and how this relates to the value we place on the environment and its resources. What element does the neoclassical view not take into consideration?
2. Identify and explain one alternate view to the neoclassical view. What does this view consider that the neoclassical view does not?
3. What is "Hubbert's Bubble?" What does it represent?
4. Explain what is meant by the "Tragedy of the Commons."
5. What is the one thing that puts tremendous pressure on our biodiversity and natural resources?
Neoclassical economics focuses on supply and demand as the driving forces behind the production and consumption of goods and services.
How to illustrate the information?It should be noted that Neoclassical economics emphasizes the choices of consumers. Thus, in neoclassical economics, the value of products and services is above the costs of production.
Hubbert's peak theory states that the rise, peak, and decline of fossil fuel production with revolutions in new technology will be longer than originally predicted before the oil reserves run out
The tragedy of the commons is an economic problem of overconsumptio, and depletion of a common pool resource
One thing that puts tremendous pressure on our biodiversity and natural resources is an ever-growing demand for resources by a growing population.
Learn more about economics on:
https://brainly.com/question/17996535
#SPJ1
Answer:
1. Neoclassical economics focuses on supply and demand as the driving forces behind the production and consumption of goods and services.
2. It should be noted that Neoclassical economics emphasizes the choices of consumers. Thus, in neoclassical economics, the value of products and services is above the costs of production.
3. Hubbert's peak theory states that the rise, peak, and decline of fossil fuel production with revolutions in new technology will be longer than originally predicted before the oil reserves run out
4. The tragedy of the commons is an economic problem of overconsumptio, and depletion of a common pool resource
5. One thing that puts tremendous pressure on our biodiversity and natural resources is an ever-growing demand for resources by a growing population.
does gravity affect the orbit of the international space
Answer:
yes
Explanation:gergrgregbfbwerbebw
The electron configuration of element Y ends in s?p4. What is
the symbol for the ion most commonly formed by this element?
a y2+
b y2-
с ү6+
d Y
This problem is providing us with the end of the electron configuration an element as s²p⁴ and asks for the most commonly formed ion. At the end, the answer is b Y²⁻.
Electron configurationIn chemistry, when analyzing electron configurations, one must first take into account how the energy levels must be filled with electrons.
Now, note the problem states that the electron configuration ends by s²p⁴, which means it is closer to complete the octet so it needs two electrons in order to do so, as it behaves as a nonmetal.
Therefore, the most commonly ion formed by this element is Y²⁻, because of the fact that it needs two electrons to complete the octet and thus become chemically stable and likely to bond with a metal.
Learn more about electron configuration: https://brainly.com/question/5524513
A nitrogen atom and an oxygen atom combine chemically to form nitric oxide.
What is nitric oxide?
O A. An element
O B. A mixture
O
C. An atomy
O D. A molecule
SUBNI
Answer:
D. A moleculeExplanation:
Nitric oxide is a relatively unstable, diatomic molecule that possesses a free radical (meaning it has an unpaired electron).
Nitric oxide is an intermediate compound formed during the oxidation of ammonia to nitric acid.
Answer:
a molecule
Explanation:
a p e x
HELLO EVERYONE PLEASE I NEED HELP WITH
Please I REALLY NEED A HELP WITH THIS PLEASE HELP ME
THIS HARRY POTTER LITERARY ESSAY
OUTLINE
1. Love and Friendship is a central theme in Harry Potter and the Philosopher's Stone. Prove that this statement is true using 2(two) different characters from the novel as examples.
Introductory Statement/ Hook:
Statement of Intent: reason A and B :
thesis reason A and B:
BODY PARAGRAPH
#1 Point #1: Introduce REASON A here, but use general statement
#1: Provide quotations from the novel to support Reason A
Explanation #1:
Proof #2:
Explanation #2:
BODY PARAGRAPH
#2 Point #2: Introduce REASON B here, but use general statements
#1: Provide quotations from the novel to support ReasonB
Explanation #1:
Proof #2:
Explanation #2:
CONCLUSION
Restate/ Summarize Thesis:
Restate/ Summarize Points:
Answer:
Ron and Hermoine
Explanation:
They always fought over petty things, but at the end, they did end up together!
(Answer for your question about love and friendship being a central theme in Harry Potter and the Philosopher's stone)
*ALSO, MY ANSWER MIGHT BE WRONG* so be sure to use a pencil just in case!
What causes atoms to form covalent bonds?
Answer:
to attain stability atoms form covalent bonds
Is this equation completely balanced?
2C8H3 + 2502 → 8C02 + 18H20
Answer:
No, because the number of carbon, hydrogen & oxygen atoms on both sides of the equation are not equal.
Explanation:
For an equation to be completely balanced, there should be equal number of reactants and products.
Number of carbon atoms on reactant side = 16
Number of hydrogen atoms on reactant side = 16
Number of oxygen atoms on reactant side = 50
Number of carbon atoms on product side = 8
Number of hydrogen atoms on product side = 36
Number of oxygen atoms on product side = 34
Therefore, we can conclude that total number of reactants does not equal total number of products therefore, this equation is not completely balanced.
[RevyBreeze]
Which of the following is true of aerobic respiration compared to anaerobic respiration?
ANSWER:
Aerobic respiration uses oxygen as a final electron (hydrogen) acceptor, whereas anaerobic respiration uses an organic molecule.
Aerobic respiration and anaerobic respiration both require oxygen as a final electron acceptor.
Aerobic respiration is less efficient than all forms of anaerobic respiration, producing less ATP and largerend-products.
Aerobic respiration uses oxygen as a final hydrogen acceptor, whereas anaerobic respiration uses an inorganic molecule other than oxygen as the final electron acceptor.
d
The true statement regarding the aerobic respiration compared to anaerobic respiration is : Aerobic respiration uses oxygen as a final electron (hydrogen) acceptor, whereas anaerobic respiration uses an organic molecule.
Aerobic respiration is a type of cellular respiration that happens within the presence of oxygen and converts food into energy. It is a biochemical process by which cells release energy from the food molecules in the presence of oxygen.
The process comprises glycolysis, Krebs cycle, and electron transport chain. It is also called oxidative respiration.
The breakdown of glucose during aerobic respiration is as follows :
C6H12O6 + 6O2 + 36 ADP + 36 phosphate → 6CO2 + 6H2O + 36 ATP (energy).
Anaerobic respiration is a type of cellular respiration that happens within the absence of oxygen and converts food into energy. It is a biochemical process by which cells release energy from the food molecules in the absence of oxygen. The process comprises glycolysis and fermentation.
The breakdown of glucose during anaerobic respiration is as follows :
C6H12O6 → 2C2H5OH (ethanol) + 2CO2 (carbon dioxide) + 2 ATP (energy).
Thus, the end-products of anaerobic respiration are lactic acid and alcohol which are toxic to the cells.
Therefore, the correct answer is option d .
To learn more about aerobic respiration :
https://brainly.com/question/74065
#SPJ11
Sig fig 35 mm + 21.321 mm + 2.00005 mm =
Answer:
Significant Figures in 200.0
Result 200.0
Sig Figs 4 (200.0)
Decimals 1 (200.0)
Scientific Notation 2.000 × 102
E-Notation 2.000e+2
What properties do the elements of iron (Fe), copper (Cu), and nickel (Ni) have in common, and where are they found on the periodic table?
Answer:
shiny appearance
Explanation:
All metals have a shiny appearance (at least when freshly polished)
Fill in the blanks to balance equation __P+__O2 ---> __P4 O10
Answer: 4P + 3O2 → P4O6
Explanation: plz give brainliest
What is the dominant intermolecular force that determines the solubility of the amine hydrochloride salt of ethyl 4-aminobenzoate in water?.
ion-ion, is the dominant intermolecular force that determines the solubility of the amine hydrochloride salt of ethyl 4-aminobenzoate in water.
What is hydrochloride ?It is standard practice to transform amines into their hydrochlorides in order to increase their water solubility, which might be advantageous for compounds used in pharmaceuticals. More than 200 hydrochlorides are listed as active components in pharmaceuticals in the European Pharmacopoeia. In comparison to free bases, these hydrochlorides might dissolve more easily in the digestive system and be absorbed into the bloodstream faster. Furthermore, many amine hydrochlorides have a longer shelf life than their corresponding free bases.
Amine hydrochlorides are latent forms of a free base, which is more reactive. In this sense, protection is granted by the production of an amine hydrochloride. The hydrochlorides of the amino acids serve as an example of this phenomenon. Shelf-stable glycine methyl ester hydrochloride is easily transformed into reactive glycine methyl ester, a substance.
To learn more about hydrochloride from the given link:
https://brainly.com/question/25148363
#SPJ4
Decane (C10H22) is used in diesel. The combustion for decane follows the equation: 2 C10H22 + 31 O2 à 20 CO2 + 22 H2O. Calculate the amount, in grams, of water (H2O) produced by the combustion of 568 grams of decane (C10H22) with 2976 grams of oxygen gas (O2). 692 792 892 992
The mass of water produced is 792 grams by the combustion of 568 grams of decane.
Given:
Combustion of 568 grams of decane with 2979 grams of oxygen.
\(2 C_{10}H_{22 }+ 31 O_2 \rightarrow 20 CO_2 + 22 H_2O\)
To find:
The mass of water produced by combustion of 568 grams of decane.
Solution:
Mass of decane = 568 g
Moles of decane :
= \(\frac{568 g}{142 g/mol}=4 mol\)
Mass of oxygen gas = 2976 g
Moles of oxygen gas:
= \(\frac{2976 g}{32 g/mol}=93 mol\)
\(2 C_{10}H_{22 }+ 31 O_2 \rightarrow 20 CO_2 + 22 H_2O\)
According to reaction, 2 moles of decane reacts with 31 moles of oxygen, then 4 moles of decane will react with:
\(=\frac{31}{2}\times 4mol=62\text{ mol of}O_2\)
But according to the question, we have 93.0 moles of oxygen gas which is more than 62 moles of oxygen gas.
So, this means that oxygen gas is present in an excessive amount. Which simply means:
Oxygen gas is an excessive reagent.Decane is a limiting reagent.Decane being limiting reagent will be responsible for the amount of water produced after the reaction.According to reaction, 22 moles of water is produced from 2 moles of decane, then 4 moles of decane will produce:
\(=\frac{22}{2}\times 4mol=44\text{mol of }H_2O\)
Mass of 44 moles of water ;
\(=44mol\times 18g/mol=792g\)
792 grams of water is produced by the combustion of 568 grams of decane.
Learn more about limiting reagent and excessive reagent here:
brainly.com/question/14225536?referrer=searchResults
brainly.com/question/7144022?referrer=searchResults