7. The ____ is a device that connects a stationary object to a fall restraint vest.
A. restraint
B. tie-off
C. lanyard
D. sling​

0.5 is the gear ratio of the gear having Input 30 teeth and output  15 teeth.

Gear Ratio is Defined as the ratio of the number of Output (driven) to input (Driver) .

Gear Ratio = output /input

The number of rotations of a  driven gear to the number of rotations of a driver gear Which means if the gear ratio is 3 the Driven will rotate 3 time if Driver rotates 1 time.

Gear ratio=15/30 = 0.5

Hence 0.5 is the gear ratio of the gear having Input 30 teeth and output  15 teeth. Higher gear ratio will give the better torque and acceleration.

To study more about Gear:https://brainly.com/question/9302478

The benefits of a career in transportation, distribution, and logistics (TDL) are:

TDL is an acronym for Transportation, distribution, and logistics. A person who builds a career around these will become better at planning and adhering to routines.

He will understand ways to keep vehicles in good order and there will also be a better understanding of business routes.

Learn more about Transportation, distribution, and logistics here:

https://brainly.com/question/10904349

The statement "once an action potential is triggered at one end of the axon, the signal is conducted along the axon" is True.

This process is called axonal conduction, and it ensures that the electrical signal is transmitted from the neuron's cell body to the synaptic terminals, where it can communicate with other neurons or target cells.

Axonal conduction refers to the process by which an electrical signal, known as an action potential, travels down the length of an axon, which is a long, slender projection of a nerve cell (neuron). Axonal conduction plays a crucial role in transmitting information within the nervous system, allowing for communication between different parts of the body.

To know more about action potential, visit the link : https://brainly.com/question/30774630

#SPJ11

Answer:

Control panel

Explanation:

The Control Panel is a component of Microsoft Windows which provides the ability to view and change system settings. It consists of a set simple computer programs (applets) that include adding or removing hardware and software, controlling user accounts, changing accessibility options, and accessing networking settings.

Answer:

yes you are

Explanation:

and you will always be

Answer:

u seem pretty nice to be giving away 50 points for free lol

Answer:

2.5=1500/Whp=> Whp=600 kWh

delWgain=1500-600=900 kWh

Money saved= 900* 6tk*=5400 tk

Answer:

Microsoft Windows

Explanation:

Microsoft Windows is an example of proprietary system software. Proprietary software is software that is owned by a specific company or individual and is typically only available for use through a license from the owner. This is in contrast to open-source software, which is freely available for anyone to use, modify, and distribute. Microsoft Windows is a proprietary operating system developed and owned by Microsoft Corporation. It is not open-source and can only be used by individuals or organizations who have purchased a license from Microsoft.

Linux, Microsoft Internet Explorer, and Microsoft Office are not examples of proprietary system software. Linux is a free and open-source operating system, and Microsoft Internet Explorer and Microsoft Office are both proprietary software programs developed and owned by Microsoft Corporation.

There will be several advantages to equipment standardization. Digital solutions accelerate standardization by giving an overview of the field equipment.

By using the most effective and efficient procedures, they aid in accelerating the rate of output. Reduce construction costs overall, especially for big contracts. A machine or piece of equipment can effortlessly perform tasks that are too difficult or delicate for human muscles to complete.

In general, they are used to assemble or disassemble objects (such as hammers and nail guns) (e.g., jackhammers and saws). Hand tools and power tools are two common categories for tools. All non-powered instruments are considered hand tools, such as such as pliers and hammers.

To know more about Equipment Sing visit:-

https://brainly.com/question/29667828

#SPJ1

Given the Z-transform of impulse response of a stable LTI system is:

\(h(z) = 2z / (z-1)\)

we have to decompose the above rational Z-transform to partial fractions. This is done by applying the partial fraction decomposition techniques.

\(h(z) = 2z / (z-1) = A / (z-1) + Bz\)

After the multiplication of (z-1) on both sides, we get

\(2z = A + Bz(z = 1) => A = 2z = 2\)

\(B = 2 / (z-1)\) Now, h(z)

\(h(z) = 2 / (z-1) + 2z / (z-1)^2\)

Now, we know the Z-transform of unit impulse function δ(n), which is:

\(Z{δ(n)} = 1\)

the Z-transform of h(n) can be expressed as:\(H(z) = Z{h(n)} = 2 / (z-1) + 2z / (z-1)^2\)Now, applying the inverse Z-transform on H(z), we get the h(n), as follows:

\(h(n) = L^-1 {H(z)} = L^-1 { 2 / (z-1) } + L^-1 { 2z / (z-1)^2 }\)

\(h(n) = 2δ(n) + 2n u(n)\) Where,\(L^-1 { 2 / (z-1) } = 2δ\)(n)and,\(L^-1 { 2z / (z-1)^2 } = 2n u(n)\)

Therefore, the impulse response h(n) for the given Z-transform is 2δ(n) + 2n u(n).

To know more about Z-transform visit:-

https://brainly.com/question/32622869

#SPJ11

Answer:

what do we do

Explanation:

Answer:

shear strength = 2682.31 Ib/ft^2

Explanation:

major principal stress = 100 Ib / in2

minor principal stress = 20 Ib/in2

Normal stress = 3000 Ib/ft2

Determine the shear strength when direct shear test is performed

To resolve this we will apply the coulomb failure criteria relationship between major and minor principal stress a

for direct shear test

use Mohr Coulomb criteria relation between normal stress and shear stress

Shear strength when normal strength is 3000 Ib/ft  = 2682.31 Ib/ft^2

attached below is the detailed solution

Answer:

Step One: Know What Your Rocket Needs to Do. ...

Step Two: Establish Mission Parameters. ...

Step Three: Call in Experts. ...

Step Four: Start Drawing. ...

Step Five: Whittle Down the Possibilities. ...

Step Six: Pick the Best Design.

Explanation:

Hope this helps and thx for tha fwee pts

The amplitude of the sinusoid is 28384 *x soít cos.

Amplitude is defined as the greatest deviation from equilibrium of a point on a vibrating body or wave in terms of displacement or distance traveled. In most cases, amplitude is calculated by looking at a wave graph and determining the height of the wave from rest. The strength or intensity of the wave is gauged by its amplitude.

Sinusoid is defined as a signal with sine wave characteristics. In the liver, spleen, and bone marrow, sinusoids and irregular tubules transport blood in place of venules and capillaries. The sine or cosine functions from trigonometry form the foundation of sinusoidal signals, which are periodic functions.

Thus the amplitude of the sinusoid is 28384 *x soít cos.

To learn more about amplitude, refer to the link below:

https://brainly.com/question/8662436

#SPJ2

Answer:

Oregon had 19 railroad crossing accidents in 2018, up from 10 in 2013. Marion County has more than most counties, logging 28 since 2008.

Explanation:

It provides explicit guidance to improve railroad crossing safety to support ODOT’s mission of a safe and efficient transporta-tion network, but is not a policy plan. Rather, it is an action plan to help ODOT achieve greater railroad crossing safety.

To establish a suitable vertical alignment, the present level highway's 2115-foot length needs to be rebuilt.

The ground's gradient and vertical curves are both included in vertical alignment.

For above given example,

Calculating the maximum permitted gradient is possible.

\(G = (V^2) / (29.83R)\)

where, G is the gradient,

V is the design speed in mph.

R is the curvature's radius in feet.

\(G = (55^2) / (29.83 * 26)\)= 0.72%

Calculating the minimum viewing distance as:

\(S = 1.47Vt + 2.3(t^2) / (3.5K) (3.5K)\)

where t is the perception-reaction time in seconds, K is the coefficient of friction, and S is the minimum sight distance in feet.

The minimum sight distance can be estimated as follows using an assumption of a perception-reaction time of 2.5 seconds and a coefficient of friction of 0.3:

524.3 feet are equal to S = 1.47 x 55 x 2.5 + 2.3(2.52)/(3.5 x 0.3)

Now that we know how long the current level highway is,

The overpass's length and the sag curve's length are equal.

The following equation can be used to determine the length of the crest curve:

\(L = (S^2) / (8G)\)

where L is the length of the crest curve, S is the shortest sight distance, and G is the highest permitted gradient.

\(L = (524.3^2) / (8 * 0.0072) = 188,607.8 ft\)

The length of the sag curve, the length of the crest curve, and the length of the transition curves all make up the entire length of the level highway that needs to be rebuilt.

Assuming a 50-foot-long transition curve, we obtain:

Overall length is equal to 180 + 188,607.8 + (2 x 50) ft.= 2115 feet

Thus, the existing level highway measures 188,887.8 feet in length, which is equal to 2,265,853.6 inches or 2115 feet.

Learn more about the vertical curve, here:

brainly.com/question/28812778

#SPJ2

Your question is incomplete, most probably the complete question is:

Due to crashes at railroad crossing, an overpass (with a roadway surface 26 ft above the existing road) is be constructed on an existing level highway. see illustration below. the existing highway has a design speed of 55 mi/hr. the overpass structure is to be level, centered above the railroad, and 180 ft long.

What is the length of the existing level highway must be reconstructed to provide an appropriate vertical alignment? assume that the sag and crest vertical curves are directly connected (i.e., there is no constant grade section).

Answer:

Crankshaft position sensor - F     I can't quite make out the letter but it's the thing at the bottom almost touching the notched wheel.

Coil Module - B  

Knock Sensor - D

Coil Pack -E

Fuse Block - A

Powertrain Control Module - C

An electric circuit's state can be changed by a switch, which is a component.

To Learn more About switch refer to;

https://brainly.com/question/14883923

#SPJ4

The correct answer choice for implementing the enqueue() method in a queue with a linked list in Java is append().

When implementing a queue using a linked list, the enqueue operation adds an element to the end of the list, as it follows the FIFO (First-In-First-Out) principle. The append() method in the linked list class would typically be used to add a new element at the end of the list, making it the most appropriate choice for the enqueue operation.

The other answer choices are not directly related to the enqueue operation in a queue implementation using a linked list:

removeafter() is used to remove an element after a specified node, which is not necessary for the enqueue operation.

prepend() is used to add an element at the beginning of the list, which does not follow the FIFO principle of a queue.

insertafter() is used to insert an element after a specified node, but it is not typically used in the enqueue operation of a queue.

Learn more about Java here:

https://brainly.com/question/12978370

#SPJ11

An administrator would need to run the Djoin.exe command twice to perform an offline domain join. Option D is the correct answer.

When performing an offline domain join, an administrator needs to run the Djoin.exe command twice. The first time to obtain a computer-specific blob and the second time to join the computer to the domain. This process can be used to join a computer to a domain when it cannot access a domain controller during the standard join process, such as for remote or disconnected computers. The Djoin.exe command-line tool is available in Windows Server 2019, Windows Server 2016, and Windows 10.

Option D is the correct answer.

You can learn more about Djoin.exe command at

https://brainly.com/question/31756815

#SPJ11

To determine the mass flow rate and inlet area of the steady-flow compressor, we can use the conservation of mass equation and Bernoulli's equation. First, let's calculate the mass flow rate, Substitute the known values into the conservation of mass equation to solve for the mass flow rate (m_dot).

Next, let's determine the inlet area (A1), Apply Bernoulli's equation between the inlet and outlet conditions:
\(P1 + 0.5 * rho1 * V1^2 = P2 + 0.5 * rho2 * V2^2\)
  where:
  - P1 is the inlet pressure
  - rho1 is the density of helium at the inlet conditions
  - V1 is the inlet velocity
  - P2 is the outlet pressure
  - rho2 is the density of helium at the outlet conditions
  - V2 is the outlet velocity

2. Rearrange the equation and solve for the inlet area (A1):
 \(A1 = (m_dot * sqrt(R1 * T1)) / (P1 * V1)\)
  where:
  - m_dot is the mass flow rate
  - R1 is the specific gas constant for helium
  - T1 is the inlet temperature
  - P1 is the inlet pressure
  - V1 is the inlet velocity

Substituting the calculated values,  Mass flow rate (m_dot) = 0.0704 lbm/s
- Inlet area\((A1) = 0.133 ft²\), Therefore, the mass flow rate is 0.0704 lbm/s and the inlet area is 0.133 ft².

To know more about compressor visit:

https://brainly.com/question/31672001

#SPJ11

We can use both steering wheel and brakes as evasive actions to avoid a collision. In most cases, your reactions and maneuvers can mean the difference between life and death. You should always be alert, cautious, and be aware of your surroundings while driving on the road.

Use your brakes - Brakes are the primary way to stop your vehicle. They can also be used to slow down when you are approaching a dangerous situation. You should always be in control of your brakes, and never slam on them suddenly. You can use your brakes to stop your vehicle in an emergency situation. If you have ABS brakes, you should press down hard on the brake pedal and hold it down until your vehicle stops.

Turn the steering wheel - Turning the steering wheel can be used as an evasive action to avoid an accident. You can use this maneuver to steer clear of obstacles or to avoid hitting another vehicle. You should always keep your hands on the steering wheel and never take them off unless it's absolutely necessary.

It's important to note that if you need to swerve, you should do so slowly and avoid sudden movements. In summary, using your brakes and turning the steering wheel can both be used as evasive actions to avoid an accident. It's essential to practice defensive driving techniques, such as keeping a safe distance, scanning the road ahead, and being aware of other drivers and road conditions.

You should always be prepared to react to unexpected situations on the road and be a responsible and safe driver.

To know more about evasive actions visit:-

https://brainly.com/question/14327670

#SPJ11

Answer:

What are some of the scalability issues in large IoT systems?

IoT Scalability Issues: 5 Essential Considerations

Large Wireless System Capacity. ...

Simplified Network Planning and Setup. ...

Interoperable Architecture. ...

Remote Network and Device Management. ...

Flexible and Scalable Software Infrastructure. ...

5 Common Myths about LPWAN for IoT Debunked.

Explanation:

Answer:

The magnetic field for this type of alternator is established by a set of stationary field poles mounted on the periphery of the alternator frame. The field flux created by these poles is cut by conductors inserted in slots on the surface of the rotating armature.

The maximum SATA device cable length is 1 meter.

SATA, which stands for Serial Advanced Technology Attachment, is a computer bus interface that connects host bus adapters to mass storage devices such as hard disk drives and optical drives. SATA cables transmit data using a serial communication protocol, which allows for faster data transfer rates compared to its predecessor, the Parallel ATA (PATA) interface. The maximum cable length for SATA devices is set to 1 meter, which is shorter compared to PATA's maximum cable length of 18 inches. This is due to the fact that the serial communication protocol used in SATA is more susceptible to signal degradation as the cable length increases. To ensure reliable data transfer, it is recommended to use high-quality cables and to avoid exceeding the maximum cable length.

To learn more about Parallel ATA (PATA) interface : brainly.com/question/28820811

#SPJ11

Answer:

a) \(\mathbf{Q_c = -3730.8684 \ Btu/hr}\)

b) \(\mathbf{\sigma _c = 4.3067 \ Btu/hr ^0R}\)

Explanation:

From the properties of Super-heated Refrigerant 134a Vapor at \(T_1 = 40^0 F\), \(P_1 = 30 \ lbf/in^2\) ; we obtain the following properties for specific enthalpy and specific entropy.

So; specific enthalpy \(h_1 = 109.12 \ Btu/lb\)

specific entropy \(s_1 = 0.2315 \ Btu/lb.^0R\)

Also; from the properties of saturated Refrigerant 134 a vapor (liquid - vapor). pressure table at \(P_2 = 160 \ lbf/in^2\) ; we obtain the following properties:

\(h_2 = 115.91 \ Btu/lb\\\\ s_2 = 0.2157 \ Btu/lb.^0R\)

Given that the power input to the compressor is 2 hp;

Then converting to  Btu/hr ;we known that since 1 hp = 2544.4342 Btu/hr

2 hp = 2 × 2544.4342 Btu/hr

2 hp = 5088.8684 Btu/hr

The steady state energy for a compressor can be expressed by the formula:

\(0 = Q_c -W_c+m((h_1-h_e) + \dfrac{v_i^2-v_e^2}{2}+g(\bar \omega_i - \bar \omega_e)\)

By neglecting kinetic and potential energy effects; we have:

\(0 = Q_c -W_c+m(h_1-h_2) \\ \\ Q_c = -W_c+m(h_2-h_1)\)

\(Q_c = -5088.8684 \ Btu/hr +200 \ lb/hr( 115.91 -109.12) Btu/lb \\ \\\)

\(\mathbf{Q_c = -3730.8684 \ Btu/hr}\)

b)  To determine the entropy generation; we employ the formula:

\(\dfrac{dS}{dt} =\dfrac{Qc}{T}+ m( s_1 -s_2) + \sigma _c\)

In a steady state condition \(\dfrac{dS}{dt} =0\)

Hence;

\(0=\dfrac{Qc}{T}+ m( s_1 -s_2) + \sigma _c\)

\(\sigma _c = m( s_1 -s_2) - \dfrac{Qc}{T}\)

\(\sigma _c = [200 \ lb/hr (0.2157 -0.2315) \ Btu/lb .^0R - \dfrac{(-3730.8684 \ Btu/hr)}{(40^0 + 459.67^0)^0R}]\)

\(\sigma _c = [(-3.16 ) \ Btu/hr .^0R + (7.4667 ) Btu/hr ^0R}]\)

\(\mathbf{\sigma _c = 4.3067 \ Btu/hr ^0R}\)

Explanation:

mathematics education grade 7