There are approximately 0.328 moles of oxygen in the sample of nickel tetracarbonyl.
To determine the number of moles of oxygen in a sample of nickel tetracarbonyl when there are 0.082 moles of nickel, we need to consider the chemical formula of nickel tetracarbonyl: Ni(CO)4.
From the chemical formula, we can conclude that each molecule of nickel tetracarbonyl contains four carbon monoxide (CO) ligands. Each CO ligand consists of one carbon atom and one oxygen atom.
Since there are four CO ligands per molecule of nickel tetracarbonyl, there are also four oxygen atoms per molecule.
Given that there are 0.082 moles of nickel, it implies that there is an equal number of moles of nickel tetracarbonyl since the molar ratio between nickel and nickel tetracarbonyl is 1:1.
Therefore, if there are 0.082 moles of nickel, there are also 0.082 moles of nickel tetracarbonyl.
Since each molecule of nickel tetracarbonyl contains four oxygen atoms, the number of moles of oxygen can be calculated as follows:
Number of moles of oxygen = Number of moles of nickel tetracarbonyl × Number of oxygen atoms per molecule
Number of moles of oxygen = 0.082 moles × 4
Number of moles of oxygen = 0.328 moles
Hence, there are approximately 0.328 moles of oxygen in the sample of nickel tetracarbonyl.
learn more about nickel tetracarbonyl here
https://brainly.com/question/15134830
#SPJ11
The number of protons that an atoms has:
Given this equation: N2 + 3 H2 → 2 NH3, how many moles of NH3 can be produced from 3.1 moles of H2?
First, we write down our reaction:
N2 + 3H2 → 2NH3
Don't forget to balance it.
We only use moles as units.
Procedure:
3 x 1 mole H2 ------------ 2 x 1 mole NH3
3.1 moles H2 ------------- x
x = 2.1 moles NH3 are produced
Answer: 2.1 moles NH3
HA and HB are two strong monobasic acids. 25.0cm3 of 6.0mol/dm3 HA is mixed with 45.0cm3 of 3.0mol/dm3 HB.
What is the H+ (aq) concentration in mol/dm3 in the resulting solution ?
A 1.9
B 2.1
C 4.1
D 4.5
If anyone could explain how to reach an answer that would be so helpful !!
Answer:
The H+ (aq) concentration of the resulting solution is 4.1 mol/dm³
(Option C)
Explanation:
Given;
concentration of HA, \(C_A\) = 6.0mol/dm³
volume of HA, \(V_A\) = 25.0cm³, = 0.025dm³
Concentration of HB, \(C_B\) = 3.0mol/dm³
volume of HB, \(V_B\) = 45.0cm³ = 0.045dm³
To determine the H+ (aq) concentration in mol/dm³ in the resulting solution, we apply concentration formula;
\(C_iVi = C_fV_f\)
where;
\(C_i\) is initial concentration
\(V_i\) is initial volume
\(C_f\) is final concentration of the solution
\(V_f\) is final volume of the solution
\(C_iV_i = C_fV_f\\\\Based \ on \ this\ question, we \ can \ apply\ the \ formula\ as;\\\\C_A_iV_A_i + C_B_iV_B_i = C_fV_f\\\\C_A_iV_A_i + C_B_iV_B_i = C_f(V_A_i\ +V_B_i)\\\\6*0.025 \ + 3*0.045 = C_f(0.025 + 0.045)\\\\0.285 = C_f(0.07)\\\\C_f = \frac{0.285}{0.07} = 4.07 = 4.1 \ mol/dm^3\)
Therefore, the H+ (aq) concentration of the resulting solution is 4.1 mol/dm³
The patient is to receive potassium chloride 40mEq orally. The label states, "Potassium Chloride, 20mEq per 15ml. What volume (ml) will you administer?
You will need to administer 30ml of potassium chloride to the patient.
To calculate the volume (ml) of potassium chloride to administer, we can use a proportion. The given label states that there are 20mEq of potassium chloride in 15ml.
Let's set up the proportion:
20mEq / 15ml = 40mEq / x ml
To solve for x, cross-multiply:
20mEq * x ml = 15ml * 40mEq
Now divide both sides by 20mEq:
x ml = (15ml * 40mEq) / 20mEq
Simplifying further, we get:
x ml = 30ml
Learn more about potassium chloride from the given link
https://brainly.com/question/31563020
#SPJ11
which of these elements has the highest electronegativity
A) lithium
B) nitrogen
C) potassium
D) arsenic
E) beryllium
1. There are 42 grams of sugar (C12H22O11) in a can of pop (342mL). Use this information (where necessary) to answer the following questions:
a) How many moles of sugar are there in the pop (3 marks)?
b) If a mole of sugar costs 90 cents, what is the value of the sugar in a can of pop (3 marks)?
c) How many particles of sugar are there in the pop (3 marks)?
The number of sugar particles is 7.4 * 10^22 particles.
What is the mole?The mole is used to describe the amount of substance. The idea was first introduced by Professor Avogadro and the number of particles that constitute one mole of a substance was said to be 6.02 * 10^23 particles in a mole.
Thus;
Molar mass of sugar = 342 g/mol
Number of moles of sugar = 42 grams/342 g/mol = 0.123 moles
Now;
If 1 mole of sugar costs 90 cents
0.123 moles of sugar costs 0.123 moles * 90 cents/1 mole
= 11 cents
Now we know that;
1 mole of sugar contains 6.02 * 10^23 particles
0.123 moles of sugar contains 0.123 moles * 6.02 * 10^23 particles / 1 mole
= 7.4 * 10^22 particles
Learn more about moles of sugar:https://brainly.com/question/14434096
#SPJ1
Write a balanced equation of decomposition reaction which is carried out by the catalyst
Answer:
A decomposition reaction is a reaction in which the compound is broken up into its constituents.
A decomposition reaction is a reaction in which the compound is broken up into its constituents. When the decomposition is brought about by a catalyst, it is called catalytic decomposition.
Let us look at the catalytic decomposition of the compound potassium trioxochlorate V. in the presence of the catalysts manganese dioxide. The reaction occurs as follows;
2KClO3 -----> 2KCl + 3O2
Explanation:
pls mark as brainliest
A particular power source releases kinetic energy that is used to move giant
magnets. These giant magnets are rotated to create electron flow. This
process describes which power source?
A. An electric generator
B. An electric motor
C. An electric reactor
D. Electromagnetism
Answer: an electric generator
Explanation:
The answer is A) An electric generator.
What is kinetic electricity in easy phrases?Kinetic power is the strength of the movement, observable as the motion of an item, particle, or set of debris. Any item in motion is using kinetic electricity: someone on foot, a thrown baseball, a crumb falling from a desk, and a charged particle in an electric field are all examples of kinetic power in paintings.
There are 3 subcategories of kinetic energy: vibrational, rotational, and translational. Vibrational kinetic strength is, unsurprisingly, a result of items vibrating. Rotational kinetic power is created with the aid of shifting items, while translational kinetic power is due to gadgets colliding with one another.
Something at domestic that moves are an instance of kinetic energy. this can be a cue ball rolling on a billiards table, a fan circulating air on a warm day, or glass shattering on the floor after it falls from the counter. electrical gadgets that are becoming on use kinetic energy as do humans transferring about the residence.
Learn more about kinetic energy here: https://brainly.com/question/25959744
#SPJ2
Select the correct answer. which substance in this redox reaction is the oxidizing agent? cu 2agno3 → 2ag cu(no3)2 a. n b. agno3 c. cu d. no3− e. cu(no3)2
AgNO₃ will act as the oxidising agent.
For the given chemical equation:Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂
Half reactions for the given chemical reaction:
Reducing agent:
Cu → Cu²⁺ + 2e⁻
Copper is a reducing agent because it is losing 2 electrons, which causes an oxidation process.
Oxidising Agent:
Ag⁺ + e⁻ → Ag
The silver ion undergoes a reduction process and is regarded as an oxidizing agent since it is acquiring one electron per atom.
Hence, AgNO₃ is considered as an oxidizing agent and therefore the correct answer is Option B.
Oxidising and Reducing agentsAn oxidizing agent is a substance that reduces itself after oxidizing another material. It passes through a reduction process in which it obtains electrons and the substance's oxidation state is decreased.A reducing agent is a chemical that oxidizes after reducing another material. It passes through an oxidation process in which it loses electrons and the substance's oxidation state increases.To know more about the process of Oxidation and Reduction, refer to:
https://brainly.com/question/4222605
#SPJ4
the pKa of MeSO2NHPh is ?
The pKa of MeSO2NHPh is approximately 10. The pKa of MeSO2NHPh (methylsulfonylphenylamine) is a measure of its acidity.
MeSO2NHPh is a sulfonamide compound, which contains a nitrogen atom with a lone pair of electrons that can act as a proton acceptor. In water, this lone pair can be protonated to form the MeSO2NHPhH+ cation. The pKa value represents the pH at which half of the molecules are in the protonated form (MeSO2NHPhH+) and half are in the unprotonated form (MeSO2NHPh).
Since the pKa of MeSO2NHPh is around 10, it means that at pH values lower than 10, most of the MeSO2NHPh molecules will be protonated, while at pH values higher than 10, most of the MeSO2NHPh molecules will be unprotonated.
Learn more about pH values here:
brainly.com/question/30329157
#SPJ11
How is the mass number of an atom calculated? (1 point)
total number of electrons
electrons plus neutrons
total number of protons
protons plus neutrons
The mass number of atoms is calculated by adding the number of neutrons and protons.
The smallest piece of stuff that makes up an element is an atom. It consists of a nucleus with protons and neutrons and orbitals with a specific number of electrons surrounding it. One can identify and distinguish an element's atom from the others by knowing the nuclear makeup of a certain atom. In actuality, the periodic table was created expressly to organize the elements in terms of their atomic and mass numbers and nuclear compositions.
According to the periodic chart, an atom's nuclear composition is closely related to its atomic and mass number. The number of protons in the nucleus or the number of electrons around an atom determines its atomic number for neutral atoms. The amount of components inside the nucleus affects the mass number, meanwhile. The total number of protons and neutrons in the nucleus is used to calculate it. As an illustration, the mass number of the element helium is 4, as its atom has two protons and two neutrons in its nucleus.
Therefore, the correct option is (d).
Learn more about electrons here:
https://brainly.com/question/860094
#SPJ9
7. A dog sled is pulled by 8 dogs and accelerates at 1.2 m/s². If each dog pulls with a force of 30 N, what
is the combined mass of the sled and rider?
The combine mass of the sled and the rider, given that each dog pulled with a force of 30 N is 200 Kg
How to determine the combine massWe know that force is related to mass and acceleration according to the following formula:
Force (F) = mass (m) × acceleration (a)
F = ma
With the above formula, we can determine the combined mass of the sled and rider. Details below.
From the question given above, the following data were obtained:
Acceleration (a) = 1.2 m/s²Force of each dog = 30 NForce of 8 dogs = 8 × 30 = 240 NCombined mass (m) =?The combined mass can be obtained as follow:
Force = mass × acceleration
240 = mass × 1.2
Divide both sides by 1.2
Mass = 240 / 1.2
Mass = 200 Kg
Thus, the combine mass is 200 Kg
Learn more about force, mass and acceleration:
https://brainly.com/question/12185838
#SPJ1
PLZ help, I'm really behind in school! I will mark brainliest for correct answers!
If the distance between two objects is reduced by a factor of 5, how will Fg be affected?
A. F g decreases to 1/25
B. F g increases by 5 times
C. F g decreases to 1/5
D. F g increases by 25 times
Answer:
Gravitational force is given by:
F=G×
d
2
m×M
Distance between two masses is increased s.t. new distance is D= 5 d
New gravitational force F
1
=F
Let on of the mass is changed to m
1
so as to maintain the same gravitational force.
Answer:
D
Explanation:
F g increases by 25 times
Periodic Trends
1) what trend do you see in atomic radius as you go down a group?
2) what causes this trend?
3) Circle the atom in each pair that has the largest atomic radius
(a) S or O
(b) Na or Al
(c) Al or B
(d) Br or Cl
(e) Mg or Ca
(f) O or F
4) Define ionization energy
5) Why does sodium form a 1 + ion while magnesium forms a 2 + ion?
6) Circle the atom in each pair that has the greater ionization energy
(a) Li or Be
(b) Na or K
(c) Cl or S
(d) Li or K
(e) Ca or Ba
(f) P or Ar
Pls help me with this:)
Explanation:
1 As you go down a group, the atomic radius of the elements increases.
2 This trend is caused by the increase in the number of electron shells as you go down a group. As more electron shells are added, the distance of the outermost electrons from the nucleus increases, resulting in a larger atomic radius.
3 (a) S
(b) Na
(c) B
(d) Br
(e) Mg
(f) O
4 Ionization energy is the amount of energy required to remove an electron from an atom or an ion.
5 Sodium has a low ionization energy because its outermost electron is only weakly attracted to the nucleus. The electron is therefore relatively easy to remove, resulting in the formation of a 1+ ion. Magnesium, on the other hand, has a higher ionization energy because its outermost electron is more strongly attracted to the nucleus. It takes more energy to remove this electron, resulting in the formation of a 2+ ion.
6 (a) Li
(b) Na
(c) Cl
(d) Li
(e) Ca
(f) Ar
Ionization energy generally increases as you go across a row in the periodic table. This is because the electron shielding effect decreases and the nuclear charge increases as you go from left to right in a row. The electron is therefore more strongly attracted to the nucleus, requiring more energy to remove it.
What is formed when atoms join together with a covalent bond?
A.
an ion
B.
a molecule
C.
a neutral atom
D.
a noble gas
Answer: B. a molecule
Explanation: When atoms join together with a covalent bond, they form a molecule. In a covalent bond, atoms share electrons to achieve a stable configuration, which allows them to form a stable molecule.
Answer:B. A molecule. I hope this helps you
Explanation:
The correct answer is B - a molecule. When atoms join together with a covalent bond, they are sharing electrons with each other to form a stable molecular structure. This can happen between two or more non-metal atoms, and the resulting compound will have a neutral charge. Unlike an ion, which has a charge due to a gain or loss of electrons, a molecule is stable and does not possess an overall charge. Additionally, the bond formed between two atoms is strong and requires energy to break. This is different from a noble gas, which refers to an element that has a full outer shell and therefore does not easily form bonds with other elements.
how does an atom of nitrogen become an ion?
Answer: A nitrogen atom must gain three electrons to have the same number of electrons as an atom of the following noble gas, neon.
Explanation:
what happens if a melting point capillary has too much sample
If a melting point capillary has too much sample, it can result in inaccurate melting point determination, capillary breakage, difficulty in observing the sample, and contamination or cross-contamination. If a melting point capillary has too much sample, it can lead to several issues:
(i) Uneven melting: Excessive sample in the capillary can result in an uneven distribution of heat during the melting process. This can cause the sample to melt at different temperatures across its length, making it difficult to accurately determine the melting point.
(ii) Spillage: When the sample exceeds the capacity of the capillary, it can overflow and spill out during the melting point determination. This not only affects the accuracy of the measurement but also creates a mess and potentially contaminates the apparatus.
(iii) Capillary breakage: The excessive pressure caused by the large amount of sample can put stress on the capillary, increasing the risk of breakage. Broken capillaries can lead to unsafe conditions and render the experiment unusable.
(iv) Incomplete melting: The excess sample can impede the proper transfer of heat, causing incomplete melting or prolonged melting times. This can result in difficulties in identifying the precise melting point, leading to inaccurate measurements.
To learn more about Melting Point Capillary from the given link
https://brainly.com/question/24136725
#SPJ4
jack tries to place magnets on his refrigerator at home, but they wont stick. what could be the reason?
Answer: The body of the refrigerator isn't made of magnetic material. Earth's magnetic field is interfering.
Answer:
The refrigerator isnt a surface that is affected by magnets
Explanation:
magnets only stick to certain surfaces, mostly metals like iron and steel. if the surface is made of plastic for example it wont stick.
you add 50 g of ice cubes at 0 celsius to 125 g of water that is initially at 20 degree centri
When you add 50 grams of ice cubes at 0 degrees Celsius to 125 grams of water initially at 20 degrees Celsius, heat exchange occurs between the two substances.
The ice cubes absorb heat from the water, causing them to melt. The amount of heat transferred can be calculated using the equation Q = mcΔT, where Q is the heat transferred, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
First, the ice cubes absorb heat until they reach 0 degrees Celsius and melt into water. The heat absorbed by the ice can be calculated using its mass (50 g) and specific heat capacity (2.09 J/g°C) to find the change in temperature.
The resulting water from the melted ice has a mass of 50 grams.
Next, the water and the melted ice reach a final equilibrium temperature.
Assuming no heat is lost to the surroundings, we can use the equation m1c1ΔT1 = m2c2ΔT2 to calculate the final temperature.
Here, m1 and m2 represent the mass of water and melted ice respectively, c1 is the specific heat capacity of water (4.18 J/g°C), and ΔT1 and ΔT2 represent the temperature changes.
To summarize, when adding 50 g of ice cubes at 0 degrees Celsius to 125 g of water initially at 20 degrees Celsius, the ice absorbs heat and melts into water.
The resulting water from the melted ice has a mass of 50 g. The water and the melted ice then reach a final equilibrium temperature, which can be calculated using.
To know more about Celsius refer here
brainly.com/question/827047#
#SPJ11
What is the gravitational potential energy of a 200kg object suspended 5m above the earth's
The gravitational potential energy for the object is 9800 J.
The gravitational potential is the scalar amount characteristic of a point in a gravitational field whose slope breaks even with the escalated of the field and rises to the work required to move a body of unit mass from a given point to a point interminably farther.
The formula referred for calculating the gravitational potential to the ground level is given by
U = mgh
where m is the mass of the object and g is the gravitational constant and last h is the height from the ground where the object is situated.
As we provided with,
g = 9.8 ms-2
m = 200 kg
h = 5m
So substituting the required values in the formula m we get
= 200 x 9.8 x 5
= 9800 J
To know more about gravitational potential refer to the link https://brainly.com/question/15978356?referrer=searchResults.
#SPJ9
hich of the following assumptions of the kinetic molecular theory of gases is not valid for real gases at high pressure? a. the volume of the gas particle is much smaller than the distance between the gas particles. b. the gas particles behave like hard, spherical objects in a state of constant motion. c. the average kinetic energy of the gas particle depends upon the temperature of the gas only. d. the gas particles move in a straight line until they collide with another particle or the walls of the container. e. all of the above are valid for real gases at high pressures
a. the volume of the gas particle is much smaller than the distance between the gas particles.
Which of the following is true regarding the kinetic theory of gases?Solution: The energy of a molecule does not change when it collides with a container's walls, according to the kinetic theory of gases. Therefore, the assumption is false With the aid of step-by-step solutions offered by experts, you can dispel your concerns and obtain favorable exam results.
The kinetic-molecular theory of gases postulates that ideal gas molecules are perpetually in motion, have a minimal volume, negligible intermolecular interactions, endure collisions that are perfectly elastic.
Keep in mind that ideal gas models are ineffective at low temperatures and high pressures because the gas expands at these conditions.
To know more about kinetic molecular theory visit:-
https://brainly.com/question/15013597
#SPJ4
This type of intermolecular force relates to the
big difference in the electronegativities. It exists
when N, O or F atom attracts with hydrogen
atom. Medium strength of attraction is
exhibited
The type of intermolecular force relates to the big difference in the electronegativities and is known as hydrogen bonding.
What are intermolecular forces?Intermolecular forces may be defined as the mechanism that mediates the interaction between the atoms of the molecules. It significantly includes the electromagnetic forces of attraction and repulsion between the atoms.
Some examples of intermolecular forces include London-dispersion force, dipole-dipole interaction, van der Waals interaction, hydrogen bonds, etc. Each one of them possesses a different set of characteristic properties distinctly. Some types of forces are also present in the body of living organisms.
Hydrogen bonding is a characteristic kind of interaction that remarkably includes dipole-dipole attraction between the most electronegative elements like Nitrogen, Oxygen, fluorine, etc., and the hydrogen atom.
Therefore, hydrogen bonding is a type of intermolecular force relates to the big difference in the electronegativities.
To learn more about Intermolecular forces, refer to the link:
https://brainly.com/question/13588164
#SPJ2
what happens to the atoms during a chemical reaction
Answer:
Atoms get rearranged and make up different molecules. No atoms are created nor destroyed.
Explanation:
Which solute, an electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each
solute is dissolved in the same mass of water?
O The nonelectrolyte does because it disperses into molecules.
O The electrolyte does because it disperses into molecules.
O The nonelectrolyte does because it dissociates into ions.
O The electrolyte does because it dissociates into ions.
The solute wether electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each solute is dissolved in the same mass of water The nonelectrolyte does because it dissociates into ions.
What is a solute?Solute refers to substances or liquid which can readily dissolve in a solvent. It's concentration is lower to that of solvent.
Therefore, The solute wether electrolyte or a nonelectrolyte, has the greater effect on the boiling point when a given amount of each solute is dissolved in the same mass of water The nonelectrolyte does because it dissociates into ions
Learn more about solute below.
https://brainly.com/question/16083884
#SPJ2
Answer:
D: The electrolyte does because it dissociates into ions.
Explanation:
What is another element that will have the same valence electrons as Be and Ca?
Need help fast please I am timed and giving 47 points.
Four groups of students plan scientific investigations to answer four questions for the science fair.
Questions for Science Fair:
1-What kinds of plant life grow naturally in the town parks?
2-Which types of treats do different breeds of dogs like best?
3-Do different types of grass affect how far a ball rolls?
4-How are the chemicals in different vegetables similar?
Which question would most likely be answered with an experimental investigation?
A-1
B-2
C-2
D-4
Answer:
C
Explanation:
Answer:
C - 3
Explanation:
This can be actually tested
in the combustion of methane, ch4(g)+ 2 O2(g) -> co2(g) +2 h2o (g), which reactant has the greatest rate of disappearance?
a. CO2
b. H2O
c. O2
d. CH4
e. CH4 and O2 have the same rate of disappearance
In the combustion of methane, CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g), the reactant that has the greatest rate of disappearance is O₂. The correct option is (c) O₂.
Combustion reactions are exothermic, in which the fuel, such as methane (CH₄), reacts with an oxidant, such as oxygen (O₂), to produce heat and other products, including carbon dioxide (CO₂) and water (H₂O).
This equation is balanced, meaning the number of atoms of each element is the same on both sides of the equation. In the above equation, methane and oxygen are the reactants, while carbon dioxide and water are the products. As a result, in the combustion of methane, oxygen is the reactant that disappears at the highest rate during the reaction.
Therefore, the correct answer is option (c) O₂.
Learn more about combustion on:
https://brainly.com/question/10458605
#SPJ11
Which two subatomic particles make up the nucleus of an atom? protons and neutrons protons and electrons electrons and neutrons
The two subatomic particles that make up the nucleus of an atom are protons and neutrons. Electrons are located outside the nucleus. Protons have a positive charge, Neutrons have no charge, and Electrons have a negative charge. Hence option A is correct.
The number of protons in an atom's nucleus is called the atomic number. The atomic number determines the elements of the atom. For example, all atoms with 6 protons in their nucleus are carbon atoms.
The number of neutrons in an atom's nucleus can vary. This is why atoms of the same element can have different masses. For example, carbon atoms can have 6, 7, or 8 neutrons. These different forms of carbon are called isotopes.
To know more about neutrons:
https://brainly.com/question/31977312
#SPJ4
An object moves from one location to another that has a different gravitational pull. How would the object's mass be affected?
G A solution of F− is prepared by dissolving 0. 0942±0. 0004 g NaF (molar mass = 41. 989±0. 001 g/mol) in 156. 00±0. 07 mL of water. Calculate the absolute uncertainty of the F- concentration in solution. Significant figures are graded for this problem. To avoid rounding errors, do not round your answers until the very end of your calculations
The absolute uncertainty of the F- concentration in the solution is 0.00011 mol/L.For the minimum value, we subtract the minimum uncertainties:Minimum F- concentration = (moles of NaF - minimum uncertainty) / (volume of water + maximum uncertainty)
To calculate the absolute uncertainty of the F- concentration in the solution, we need to consider the uncertainties in both the mass of NaF and the volume of water.
1. Calculating the moles of NaF:
To find the moles of NaF, we divide the given mass of NaF (0.0942 ± 0.0004 g) by the molar mass of NaF (41.989 ± 0.001 g/mol). This gives us:
moles of NaF = (0.0942 ± 0.0004 g) / (41.989 ± 0.001 g/mol)
2. Calculating the F- concentration:
To find the F- concentration, we divide the moles of NaF by the volume of water in liters (156.00 ± 0.07 mL = 0.15600 ± 0.00007 L). This gives us:
F- concentration = (moles of NaF) / (volume of water)
3. Combining the uncertainties:
To calculate the absolute uncertainty, we need to find the maximum and minimum possible values for the F- concentration. This can be done by adding and subtracting the maximum and minimum uncertainties from the calculated F- concentration.
For the maximum value, we add the maximum uncertainties:
Maximum F- concentration = (moles of NaF + maximum uncertainty) / (volume of water - minimum uncertainty)
learn more about absolute uncertainty
https://brainly.com/question/30551426
#SPJ11