A gas occupies a volume of 139.3-mL at 135.5-kPa. What volume will the gas occupy at 138.7-kPa if the temperature remains the same?

Taking into account the definition of dilution,  the new concentration of the solution is 0.2567 M.

First of all, you have to know that   dilution is the reduction in concentration of a chemical in a solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volumeof the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

In this case, you know:

Replacing in the definition of dilution:

0.385 M× 0.600 L= Cf× 0.900 L

Solving:

Cf= (0.385 M× 0.600 L)÷ 0.900 L

Cf= 0.2567 M

In summary, the new concentration of the solution is 0.2567 M.

Learn more about dilution:

6.4875 moles of nitrogen gas would be produced if 8.65 moles of copper(II) oxide were reacted with excess ammonia.

Given the following balanced equation, 2 NH₃(g) + 3 CuO (s) → 3 Cu(s) + N₂(g) + 3 H₂O(g). We are required to determine the number of moles of nitrogen gas that would be produced if 8.65 moles of copper(II) oxide were reacted with excess ammonia. We can use stoichiometry to solve this problem. Stoichiometry is the quantitative relationship between the reactants and products in a chemical reaction. It allows us to make predictions about the amount of product produced or reactant required in a chemical reaction. Stoichiometry relies on the balanced chemical equation for the reaction. In this case, the balanced chemical equation is 2 NH₃(g) + 3 CuO (s) → 3 Cu(s) + N₂(g) + 3 H₂O(g).

The balanced chemical equation shows that 2 moles of ammonia react with 3 moles of copper(II) oxide to produce 1 mole of nitrogen gas and 3 moles of water. This means that the mole ratio of ammonia to nitrogen gas is 2:1. We can use this mole ratio to determine the number of moles of nitrogen gas produced in the reaction. We know that 8.65 moles of copper(II) oxide is reacted with excess ammonia. Since copper(II) oxide is the limiting reagent, we can use it to calculate the number of moles of ammonia used in the reaction. The molar ratio of copper(II) oxide to ammonia is 3:2. Therefore, we can calculate the number of moles of ammonia used in the reaction as follows:Number of moles of ammonia = (3/2) × number of moles of copper(II) oxideNumber of moles of ammonia = (3/2) × 8.65Number of moles of ammonia = 12.975 molesWe know that the mole ratio of ammonia to nitrogen gas is 2:1. Therefore, the number of moles of nitrogen gas produced in the reaction is half the number of moles of ammonia used.Number of moles of nitrogen gas produced = (1/2) × number of moles of ammoniaNumber of moles of nitrogen gas produced = (1/2) × 12.975Number of moles of nitrogen gas produced = 6.4875 moles.

for such more questions on moles

https://brainly.com/question/29367909

#SPJ8

Metal conductivity generally goes down or resistivity goes up with temperature goes up.

Answer:

ball B

Explanation:

Ball B with a density of 0.9 g/cm³ will float in water.

Option B is the correct answer.

Density is mass per unit volume.

Its unit is given as g/cm³.

We have,

The density of Ball A.

= 22 g / 20 cm³

= 1.1 g/cm³

The density of Ball B.

= 18 g / 20 cm³

= 0.9 g/cm³

Now,

Since the density of water is 1.0 g/cm³,

The ball that will float is the one with a density of less than 1.0 g/cm³.

Therefore,

Ball B with a density of 0.9 g/cm³ will float in water.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ5

Answer:

Two positive aspects of using methane recapture systems are able to generate significant electricity. Another benefit is that the process of anaerobic digestion creates heat that can be used to warm buildings where animals are kept

Answer:  The correct answer is;

Two positive aspects of using methane recapture systems include lowering the impact on greenhouse gasses and the production of energy. Methane is a very potent greenhouse gas that is contributing to global warming. As a result, the recapturing process reduces the methane impacts of global warming by reclaiming and reusing the gas for other purposes. Recaptured methane can be stored and used to generate electricity or used as fuel to power updated vehicles and other engines on the farm. The overall benefits from this combination are reducing impacts causing global warming and lower the cost of electricity or fuel on the farm.

Explanation:  This answer has been confirmed correct.

Answer:

7.77×10^4=77,700

Explanation:

10^4 is 10,000, since there are 4 zeros in 10,000, move the decimal in 7.77 4 spaces to the right.

1: 77.7

2: 777.

3: 7,770.

4 77,700.

Side note: This trick ONLY works with +/-10^x value. If the value is positive the decimal moves to the right, and if the value is negative the decimal moves to the left.

Example: 7.77×(-10)^3=.00777

(-10)×(-10)×(-10)=(-10)^3= -1000

1: .777

2: .0777

3: .00777

When the system is changed color, neutralization has occurred and the amount of acid (or base) has been balanced with the amount of base.

Any substance that when dissolved in aqueous solution has a sour taste, causes the blue litmus paper to turn red, interacts with some minerals to liberate hydrogen, or mixes with bases to produce compounds that promote chemical processes is considered an acid.

Acidosis is the medical term for when a large amount of acid causes the body's pH to become unbalanced. If the mechanisms of elimination cannot remove too much acid, it might cause major health problems.

To know more about Acid visit:

brainly.com/question/29796621

#SPJ1

They are described as promissory notes that guarantee the unalienable rights of life, liberty, and the pursuit of happiness.

Claim 1 is that the Constitution and the Declaration of Independence give equal rights to all Americans. The evidence for this claim is found in the article of the Declaration of Independence.

Claim 2 is that America has failed to deliver these rights to black people. The evidence for this is found in the speech "I Have a Dream" by Martin Luther King Jr.

The Constitution and Declaration of Independence are described as promissory notes that guarantee the unalienable rights of life, liberty, and the pursuit of happiness.

Following are the Claims and Evidence:

Claim 1: All Americans, not only whites, are guaranteed equal rights under the Constitution and the Declaration of Independence.

The Declaration of Independence has supporting evidence for Claim 1.

Claim 2: The United States has failed to grant black people the rights outlined in the Constitution and Declaration of Independence.

Martin Luther King Jr.'s "I Have a Dream" speech serves as proof for Claim 2.

Learn more about the Constitution at: https://brainly.com/question/470736

#SPJ1

Scientific notation makes it easier to work with very large or very small numbers because it makes a very small or large number into a shorter one.

Scientific notation makes it easy to compare numbers that have very large values because all the zeroes have been replaced with small number which can be read easily. In scientific notation, numbers with a greater exponent are bigger than numbers with a small or less exponent because higher exponent shows the larger value and smaller value represents smaller value. So that's why scientific notation make easier to write or read a very large or small number.

So we can conclude that Scientific notation makes it easier to work with very large or very small numbers because it makes a very small or large number into a shorter one.

Learn more about scientific notation here: https://brainly.com/question/1767229

#SPJ1

The percent composition of CuBr₂ is approximately 28.46% of Cu and 71.54% of Br.

To determine the percent composition of CuBr₂ (copper(II) bromide), we need to calculate the mass of each element in the compound and then divide it by the molar mass of the entire compound.

The molar mass of CuBr₂ can be calculated by adding up the atomic masses of copper (Cu) and bromine (Br) in the compound. The atomic masses of Cu and Br are approximately 63.55 g/mol and 79.90 g/mol, respectively.

Molar mass of CuBr₂ = (63.55 g/mol) + 2(79.90 g/mol) = 223.35 g/mol

Now, let's calculate the percent composition of each element in CuBr₂:

Percent composition of copper (Cu):

Mass of Cu = (63.55 g/mol) / 223.35 g/mol × 100% ≈ 28.46%

Percent composition of bromine (Br):

Mass of Br = 2(79.90 g/mol) / 223.35 g/mol × 100% ≈ 71.54%

Therefore, the percent composition of CuBr₂ is approximately:

- Copper (Cu): 28.46%

- Bromine (Br): 71.54%

These values represent the relative mass percentages of copper and bromine in the compound CuBr₂.

for more such questions on composition

https://brainly.com/question/28250237

#SPJ8

Deposition happens after weathering and erosion. Hence option c is correct.

Decomposition is defined as the process by which the dead tissues disintegrate and transform into more basic biological forms. The process of recycling nutrients that have been consumed by an organism to create its body begins with decomposition. It is the process through which the dead tissues disintegrate and change into more basic organic forms. The process of decomposition is intricate.

Weathering and erosion are followed by deposition. The third stage in the creation of sedimentary rocks is deposition. It occurs as a result of the weathering, erosion, and movement of sediments including pebbles, mud, sand, and small rocks.

Thus, deposition happens after weathering and erosion. Hence option c is correct.

To learn more about decomposition, refer to the link below:

https://brainly.com/question/8009068

#SPJ2

Answer:

D. The temperature remains at 0°C until the change of state is complete.

The measurement of 0.03412 kg has 5 significant figures. Significant figures are used to provide an indication of the precision of a measurement and should be used when performing calculations.

Measurements are the numerical values used to quantify the size, amount, or extent of something. Measurements are used to describe physical attributes and characteristics, such as length, width, weight, height, area, volume, speed, temperature, pressure, force, energy, power, and time. Measurements are also used to determine the amount of a certain material that is needed for a given purpose, such as a recipe. Measurements are essential for scientific investigation, engineering, and other activities that require precision and accuracy.

The measurement of 0.03412 kg has 5 significant figures. Significant figures are the meaningful digits of a number that are important in providing information about the measurement. In this measurement, the 4 digits after the decimal point (3412) provide the precision of the measurement, and therefore are significant figures. The leading zero does not provide any additional precision and is not a significant figure. Therefore, the measurement of 0.03412 kg has 5 significant figures.

Significant figures are used to provide an indication of the precision of a measurement. For example, a measurement of 0.03412 kg has a precision of 0.00001 kg, which is greater than a measurement of 0.3412 kg, which has a precision of 0.0001 kg. The more significant figures a measurement has, the more precise it is.

Significant figures are also important in calculations. To ensure accuracy, all calculations should be done using the same number of significant figures as the measurements being used. For example, if two measurements, 0.03412 kg and 0.02384 kg, are used in a calculation, the result should be reported to 5 significant figures.

In conclusion, the measurement of 0.03412 kg has 5 significant figures. Significant figures are used to provide an indication of the precision of a measurement and should be used when performing calculations.

To know more about measurements click-
https://brainly.com/question/28835783
#SPJ1

The measurement of 0.03412 kg has 5 significant figures. Significant figures are used to provide an indication of the precision of a measurement and should be used when performing calculations.

Measurements are the numerical values used to quantify the size, amount, or extent of something. Measurements are used to describe physical attributes and characteristics, such as length, width, weight, height, area, volume, speed, temperature, pressure, force, energy, power, and time. Measurements are also used to determine the amount of a certain material that is needed for a given purpose, such as a recipe. Measurements are essential for scientific investigation, engineering, and other activities that require precision and accuracy.

The measurement of 0.03412 kg has 5 significant figures. Significant figures are the meaningful digits of a number that are important in providing information about the measurement. In this measurement, the 4 digits after the decimal point (3412) provide the precision of the measurement, and therefore are significant figures. The leading zero does not provide any additional precision and is not a significant figure. Therefore, the measurement of 0.03412 kg has 5 significant figures.

Significant figures are also important in calculations. To ensure accuracy, all calculations should be done using the same number of significant figures as the measurements being used. For example, if two measurements, 0.03412 kg and 0.02384 kg, are used in a calculation, the result should be reported to 5 significant figures.

In conclusion, the measurement of 0.03412 kg has 5 significant figures. Significant figures are used to provide an indication of the precision of a measurement and should be used when performing calculations.

To know more about measurements click-

https://brainly.com/question/28835783

#SPJ1

The complete question is as follows:

How many significant figure are in 0.03412​ kg?

Increasing the pressure of a gas system increases the rate of reaction because it leads to an increase in the number of collisions between gas molecules. option D. It increases the rate of reaction because it increases the number of collisions.

Increasing the pressure of a gas system increases the rate of reaction because it leads to an increase in the number of collisions between gas molecules. As pressure increases, the gas molecules are compressed into a smaller volume, resulting in a higher concentration of molecules per unit volume. This higher concentration means that there are more gas molecules in a given space, leading to a greater frequency of collisions. According to the collision theory, for a reaction to occur, molecules must collide with sufficient energy and the correct orientation. By increasing the pressure, the molecules are brought closer together, increasing the likelihood of effective collisions. This, in turn, increases the rate of reaction. Therefore, increasing the pressure of a gas system increases the rate of reaction by increasing the number of collisions between gas molecules. Option D) is correct

For more question on pressure

https://brainly.com/question/24719118

#SPJ8

Answer:

A logic bomb and a time bomb are both types of malicious software or code that are designed to cause harm to a computer system or network. Here's a brief explanation of each:

Logic Bomb:

A logic bomb is a piece of code or software that is intentionally inserted into a system to execute a malicious action when specific conditions are met. It remains dormant until triggered by a predefined event or circumstance, such as a specific date, time, or user action. Once triggered, the logic bomb may perform various harmful actions, such as deleting files, corrupting data, or disrupting system functionality. The purpose of a logic bomb is often to cause damage or to gain unauthorized access to a system.

Time Bomb:

A time bomb is similar to a logic bomb, but it is specifically designed to activate or execute its malicious payload at a certain date or time. It is usually programmed to remain undetected until the predetermined time arrives. The time bomb can be set to trigger after a specific time period or on a particular date, at which point it may carry out destructive actions. Time bombs can be used by attackers to target specific events or to coordinate an attack to occur simultaneously across multiple systems.

Both logic bombs and time bombs are considered forms of malicious code or malware and are used with malicious intent to disrupt, damage, or compromise computer systems or networks. They can be extremely harmful, and it is important to have strong security measures, such as antivirus software and regular system updates, to protect against such threats.

Explanation:

There are 288 possible isomers for 3-chlorobutan-2-ol.

There are 7200 possible isomers for 4-chloropentane-2,3-diol.

3-chlorobutan-2-ol:

Total number of isomers = number of possible arrangements of carbon atoms x number of possible arrangements of other atoms

= 24 x 12

= 288

Therefore, there are 288 possible isomers for 3-chlorobutan-2-ol.

4-chloropentane-2,3-diol:

Total number of isomers = number of possible arrangements of carbon atoms x number of possible arrangements of other atoms

= 120 x 60

= 7200

Therefore, there are 7200 possible isomers for 4-chloropentane-2,3-diol.

Isomers are molecules with the same molecular formula (the same amount and types of atoms) but different atomic arrangements in space. This means that despite having the same molecular formula, isomers have distinct physical and chemical properties.

learn more about isomer here

https://brainly.com/question/26298707

#SPJ9

Answer:

Aluminium

Explanation:

From the question given above, the following data were obtained:

Diameter (d) = 1.25 cm

Height (h) = 6.48 cm

Volume (V) of cylindrical=.?

Mass (m) of cylindrical object = 21.535 g

Density of the cylindrical object =..?

Next, we shall determine the radius of the cylindrical object. This is illustrated below:

Diameter (d) = 1.25 cm

Radius (r) =?

r = d/2

r = 1.25/2

Radius (r) = 0.625 cm

Next, we shall determine the volume of the cylindrical object. This can be obtained as follow:

Height (h) = 6.48 cm

Radius (r) = 0.625 cm

Pi (π) = 3.14

Volume (V) of cylindrical=.?

V = πr²h

V = 3.14 × 0.625² × 6.48

V = 7.948 cm³

Recall:

1 cm³ = 1 mL

Therefore

7.948 cm³ = 7.948 mL

Thus, the volume of the cylindrical object is 7.948 mL

Finally, we shall determine the metal in which the cylindrical object is made up of by calculating the density of the cylindrical object. This can be obtained as follow:

Mass (m) of cylindrical object = 21.535 g

Volume of the cylindrical object = 7.948 mL

Density of cylindrical object =?

Density = mass /volume

Density = 21.535 / 7.948

Density of cylindrical object = 2.7 g/mL

Comparing the density of the cylindrical object (i.e 2.7 g/mL) with those given in the table in the question, the cylindrical object is made of aluminium since they have the same density.

The earliest energy source for humans was wood. Wood has been used as a primary energy source for humans since prehistoric times, making it the earliest known source of energy.

Early humans used wood to create fire, which was used for warmth, cooking, and light. As human societies developed, the use of wood expanded to include building materials, transportation, and other forms of energy production, such as charcoal.

While wood has been a reliable source of energy for humans throughout history, the widespread use of fossil fuels in the industrial era led to a decline in the use of wood as a primary energy source.

However, wood still plays an important role in many parts of the world, particularly in developing countries where it is used for cooking and heating. Additionally, the use of wood for energy is gaining renewed interest as a form of renewable energy and an alternative to fossil fuels.

Learn more about wood here:

https://brainly.com/question/10967023

#SPJ1

Answer:

It's critical in the process of cellular respiration

It is critical in the process of cellular respiration; is the correct answer; as water plays a very important role in transportation of oxygen and maintaining cell structure.

The process by which organisms combine food molecules with oxygen to form energy , which is used for life sustaining activities is called Cellular Respiration.

Carbon Di-Oxide and Water are produced as by products.

Water acts as a solvent in facilitating the transport of oxygen in respiration.

At the molecular level, water permits everything inside the cell to have the proper structure which is very important for biological processes.

Hence option B , i.e. It is critical in the process of cellular respiration; is the correct answer.

To know more about Cellular Respiration

https://brainly.com/question/13721588

#SPJ2

Answer:

Explanation:

aluminum

Answer: The aluminum ion

Explanation:

Answer: The set of quantum numbers for the electrons in Be atom are (2, 1, -1, 1/2), (1, 0, 0, 1/2), (1, 0, 0, -1/2) and (2, 0, 0, -1/2)

Explanation:

There are 4 quantum numbers:

Berylium (Be) is the 4th element of periodic table having electronic configuration of \(1s^22s^2\)

For first electron:

\(n=1\\l=0\text{ (for s-subshell)}\\m=0\\s=+\frac{1}{2}\)

For second electron:

\(n=1\\l=0\\m=0\\s=-\frac{1}{2}\)

For first electron:

\(n=2\\l=0\text{ (for s-subshell)}\\m=0\\s=+\frac{1}{2}\)

For second electron:

\(n=2\\l=0\text{ (for s-subshell)}\\m=0\\s=-\frac{1}{2}\)

Hence, the set of quantum numbers for the electrons in Be atom are (2, 1, -1, 1/2), (1, 0, 0, 1/2), (1, 0, 0, -1/2) and (2, 0, 0, -1/2)

The calculated formula masses to 133.5 amu, we find that the substance with a formula mass closest to 133.5 amu is (d) AlCl3. Therefore, the answer is option D.

To identify the substance with a formula mass of 133.5 amu, we need to calculate the formula mass of each given substance and compare it to 133.5 amu.

(a) MgCl2:

The formula mass of MgCl2 can be calculated by adding the atomic masses of magnesium (Mg) and chlorine (Cl).

Mg: atomic mass = 24.31 amu

Cl: atomic mass = 35.45 amu

Formula mass of MgCl2 = (24.31 amu) + 2(35.45 amu) = 95.21 amu

(b) SCl:

The formula mass of SCl can be calculated by adding the atomic masses of sulfur (S) and chlorine (Cl).

S: atomic mass = 32.07 amu

Cl: atomic mass = 35.45 amu

Formula mass of SCl = 32.07 amu + 35.45 amu = 67.52 amu

(c) BCl:

The formula mass of BCl can be calculated by adding the atomic mass of boron (B) and chlorine (Cl).

B: atomic mass = 10.81 amu

Cl: atomic mass = 35.45 amu

Formula mass of BCl = 10.81 amu + 35.45 amu = 46.26 amu

(d) AlCl3:

The formula mass of AlCl3 can be calculated by adding the atomic mass of aluminum (Al) and 3 times the atomic mass of chlorine (Cl).

Al: atomic mass = 26.98 amu

Cl: atomic mass = 35.45 amu

Formula mass of AlCl3 = 26.98 amu + 3(35.45 amu) = 133.78 amu. Option D

For more such questions on masses visit:

https://brainly.com/question/24191825

#SPJ8

Answer:

.

Explanation:

To make 75.0 mL of 3.50 M HCI, 21.9 mL of 12.0 M HCl must be added. The letter A, 21.9 mL, is the right response among the options.

The space consumed within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.

The potential of an object is gauged by its dimensions. For instance, a cup's capacity is stated to really be 100 ml if it can accommodate 100 ml of distilled water in its brim. The quantity of volume occupied by a three-dimensional object can also be used to describe volume.

To know more about Volume visit:

https://brainly.com/question/24086520

#SPJ4

Answer:

A

Explanation:

Answer: Moseley's experiments in X-ray spectroscopy showed directly from their physics that cobalt and nickel have the different atomic numbers, 27 and 28, and that they are placed in the Periodic Table correctly by Moseley's objective measurements of their atomic numbers.

Explanation:

Answer:

Br-CH2-CH(CH3)2-C(Cl)H-CH(CH3)2-CHO

Explanation:

The molecule has a total of 14 carbon atoms, 13 hydrogen atoms, and 1 bromine atom. The carbon atoms are arranged in a chain with a methyl group attached to the second carbon atom, a chlorine atom attached to the third carbon atom, and two methyl groups attached to the fourth carbon atom. The fifth carbon atom has a carbonyl group attached to it.

The molecule is an aldehyde, which means that it has a carbonyl group (C=O) at the end of the chain. The carbonyl group is polar, and the oxygen atom has a partial negative charge. The hydrogen atom has a partial positive charge. This polarity makes the aldehyde group susceptible to nucleophilic attack.

The bromine and chlorine atoms are both electrophilic, which means that they have a partial positive charge. This makes them susceptible to nucleophilic attack.

The methyl groups are non-polar and do not have any significant reactivity.

The molecule is a chiral molecule, which means that it has a mirror image that is not superimposable on itself. This is because the carbon atom with the carbonyl group is attached to four different groups.

The molecule is a liquid at room temperature and has a strong odor. It is used in a variety of products, including perfumes, flavorings, and plastics.