A given mass gas of occupies 500 cubic centimeter at 25 degree celsius calculate the temperature in degree celsius as which it's volume becomes double at constant pressure
Answers
The temperature at which the gas's volume becomes double at constant pressure is approximately 1021.15 degrees Celsius.
To solve this problem, we can use Charles's law, which states that the volume of a gas is directly proportional to its temperature when pressure remains constant. Mathematically, it can be expressed as:
V₁ / T₁ = V₂ / T₂
where V₁ and T₁ are the initial volume and temperature, and V₂ and T₂ are the final volume and temperature.
Let's assume the initial volume is V₁ = 500 cubic centimeters, and we want to find the temperature T₂ at which the volume becomes double (V₂ = 2 * V₁ = 2 * 500 = 1000 cubic centimeters).
Since the pressure remains constant, we can rewrite Charles's law as:
V₁ / T₁ = V₂ / T₂
Substituting the values:
500 / (25 + 273.15) = 1000 / T₂
Simplifying the equation, we get:
T₂ = (1000 * (25 + 273.15)) / 500
T₂ = 1294.3 Kelvin
To convert this temperature to degrees Celsius, we subtract 273.15:
T₂ = 1294.3 - 273.15
T₂ ≈ 1021.15 degrees Celsius
Therefore, the temperature at which the gas's volume becomes double at constant pressure is approximately 1021.15 degrees Celsius.
know more about Charles's law here
https://brainly.com/question/21184611#
#SPJ11
Related Questions
how much volume do the gas molecules take up in an inflated balloon
Answers
Answer:
The volume of a gas is determined by the volume of the container it is in. Gases take the shape of their container and the volume of the container....
Explanation:
What happens to the volume or size of a balloon as it rises in the air?
When a balloon goes up higher in the air, its size will increase. Since there's less air in the upper atmosphere, there's less stuff pushing back on the balloon, and hence the pressure is lower, which allows the balloon to expand.
Is pressure inside a balloon greater?
The pressure inside the balloon is higher than the pressure on the outside. ... And the direction of airflow is always from higher to lower pressure. If the pressure was same then there would be no airflow and if the pressure outside was higher , air will flow from outside to the inside of the balloon.
What is the relationship between volume and pressure?
Boyle's law is a gas law, stating that the pressure and volume of a gas have an inverse relationship. If volume increases, then pressure decreases and vice versa, when temperature is held constant. Therefore, when the volume is halved, the pressure is doubled; and if the volume is doubled, the pressure is halved.
Mark as brainliest if liked it. Thanks hope this helps
A doctor prescribes a medication to a 169 lb patient. The medication is prescribed at a dosage of 5 mg/kg. How much medication should the patient be given?1 lb = 453.6 g
Answers
Given data
Patient's mass in lb = 169 lb
Dosage = 5 mg/kg
1 lb = 453.6 g
Chemistry -> Measurements -> Mass and weight
When the doctor prescribes a medication at a dosage of 5 mg/kg, the amount of medication the patient is going to ingest depends on their weight. If the patient's weight were 1 kg, for example, he or she would take 5 mg of that medication.
Based on this logic, we first have to convert the patient's weight from pounds to kilograms, knowing 1 kg is the same as 1000 grams.
Let's use the following conversion factor:
\(\frac{1lb}{453.6g}\)\(\begin{gathered} weight\text{ \lparen kg\rparen= }169lb*\frac{453.6g}{1lb}*\frac{1kg}{1000g} \\ \\ weight\text{ \lparen kg\rparen=}76.66kg \end{gathered}\)Since the patient weighs 76.66 kg, the next step multiplying by the dosage, like the following:
\(\begin{gathered} Amount\text{ of medication = }76.66kg*\frac{5mg}{1kg} \\ \\ Amount\text{ of medication = }383.3mg \end{gathered}\)Final answer:
The patient should take 383.3 mg of the medication prescribed.
Calculate the number of formula units of KMnO4 in 100 mols
Answers
Answer:
100 moles of KMnO₄ contain 602.2 × 10²³ formula units.
Explanation:
Given data:
Number of moles of KMnO₄ = 100 mol
Number of formula units = ?
Solution:
The given problem will be solved through Avogadro number.
1 mole contain = 6.022 × 10²³ formula units
100 mol × 6.022 × 10²³ formula units / 1 mol
602.2 × 10²³ formula units
Thus, 100 moles of KMnO₄ contain 602.2 × 10²³ formula units.
What should be done in order to increase the gravitational force between two objects?
Answers
Answer:
Decrease the distance between them or increase the mass.
Explanation:
F= GM1M2/ R²
Answer:
decrease the distance between the objects
Explanation:
i did the test and got da epic 100 score
what will happen when the rates of evaporation and condensation are equal
Answers
In the cathode ray tube experiment, j. j. thomson passed an electric current through different gases inside a cathode ray tube in the presence of an electric field. in which two ways did this experiment change scientists’ understanding of the atom?
Answers
The two ways were,
It showed that atoms can be divided into smaller parts. It showed that all atoms contain electrons.What is Cathode ray tube experiment ?A cathode-ray tube, often known as a CRT, is a vacuum tube that houses one or more electron cannons that produce electron beams that are then bent to produce pictures on a phosphorescent screen. The visuals might be pictures (from a television or computer display), electrical waveforms (from an oscilloscope), radar targets, or other occurrences.
Tomson came to the conclusion that atoms can be divided into their constituent corpuscles (atoms are made up of smaller particles).
The electron was discovered in 1897 by J. J. Thomson.
His "plum pudding" concept from 1904 postulated that the positive charge contains embedded electrons.
With this model, he disproved his first theory (the atom was composed of immaterial vortices).
to learn more about cathode ray tube experiment go to - https://brainly.com/question/9177595
#SPJ4
A girl skateboards with a kinetic energy of 2543.2 j. If the girl and skateboard have a total mass of 110kg, what is her speed?
Answers
Answer:
Her speed is 6.8m/s.
Explanation:
K.E= 1/2mv²
or, 2543.2= 1/2×110×v²
or, 2543.2 = 55v²
or, 2543.2/55 = v²
or, 46.24 = v²
or, 6.8² = v²
v = 6.8 m/s
answer
6.8
explanation
k.e=1/2v^2
2543.2=55v^2
46.24=v^2
6.8^2=v^2
v=6.8
at which layer of the osi model does a router function?
Answers
The router operate in the network layer of the Open Systems Interconnection (OSI) model, or layer 3.
The OSI model is a theoretical framework that describes how data is transmitted between two systems in a network. It consists of seven layers, each with its own specific functions.
At the Network Layer, a router's main function is to route or forward data packets from one network to another based on the destination IP address. The router determines the best path for the data packets to take, based on its routing table, and forwards them to their destination. The router also helps to ensure that data packets are transmitted reliably and efficiently by performing functions such as fragmentation and reassembly of data packets.
To know more about router please refer:
https://brainly.com/question/28939774
#SPJ4
Explain how scientists study the Earth’s interior. PLEASE HELP :))))!
Answers
Answer:
Scientists study Earth's interior by studying
seismic waves. Seismic waves are waves of energy that travel
through Earth.
Explanation:
in a lithium ion batteries, the lithium ions themselves constitute the:
Answers
The battery also includes a separator, which helps keep the anode and cathode apart, as well as current collectors, which conduct the flow of electrons inside the battery.
In a lithium-ion battery, the lithium ions themselves constitute the electrolyte. Lithium-ion batteries use a lithium ion to transport electrons between the anode and cathode electrodes when they charge and discharge. Lithium-ion batteries, unlike conventional batteries, do not have a liquid electrolyte, but instead, they use a porous electrolyte that can transport lithium ions from one electrode to the other while still preventing the electrodes from touching. The anode and cathode of the battery are separated by a separator. The lithium ions themselves constitute the electrolyte in lithium-ion batteries.In general, a lithium-ion battery comprises a cathode, anode, and electrolyte. The anode is made of carbon, and the cathode is made of lithium cobalt oxide or a similar lithium-based compound. The battery also includes a separator, which helps keep the anode and cathode apart, as well as current collectors, which conduct the flow of electrons inside the battery.
To know more about collectors visit:
https://brainly.com/question/23095705
#SPJ11
how+many+milliliters+of+a+syrup+containing+85%+w/v+of+sucrose+should+be+mixed+with+150+ml+of+a+syrup+containing+60%+w/v+of+sucrose+to+make+a+syrup+containing+80%+w/v+ofsucrose?
Answers
To make a syrup containing 80% w/v of sucrose, a specific amount of a syrup containing 85% w/v of sucrose should be mixed with 150 ml of a syrup containing 60% w/v of sucrose.
Let's assume that x milliliters of the 85% w/v sucrose syrup should be mixed with the 150 ml of the 60% w/v sucrose syrup to obtain the desired 80% w/v sucrose syrup. To determine the amount of sucrose in the final mixture, we need to consider the sucrose content in each syrup. The 85% w/v syrup contains 85 grams of sucrose in 100 ml, so x milliliters of this syrup will contain (85/100) * x grams of sucrose.
Similarly, the 60% w/v syrup contains 60 grams of sucrose in 100 ml, so 150 ml of this syrup will contain (60/100) * 150 grams of sucrose. To find the total amount of sucrose in the mixture, we add the amount of sucrose from each syrup:
(85/100) * x + (60/100) * 150 = (80/100) * (x + 150)
Simplifying this equation allows us to solve for x, which represents the number of milliliters of the 85% w/v sucrose syrup needed to achieve the desired concentration.
Learn more about sucrose here: https://brainly.com/question/477537
#SPJ11
Why should barbecues and cars never be operated in enclosed places?
Answers
what type of cells are these?
(Plant or animal)
Answers
Answer:
5 is an animal cell, 6 is a plant cell
Explanation:
hope this helps!
6.Plant because that looks like the cells on a crease of a leaf
Hope this helps
what is the central atom? enter its chemical symbol. how many lone pairs are around the central atom? what is the ideal angle between the carbon-chlorine bonds? compared to the ideal angle, you would expect the actual angle between the carbon-chlorine bonds to be ...
Answers
The central atom refers to the atom in a molecule that is bonded to multiple other atoms. Its chemical symbol depends on the specific molecule being discussed. The number of lone pairs around the central atom varies depending on the molecule's structure.
The central atom is the atom in a molecule that is bonded to multiple other atoms. Its chemical symbol varies depending on the specific molecule under consideration. The number of lone pairs surrounding the central atom depends on the molecular structure and the distribution of electrons. For example, in the molecule carbon tetrachloride (CCl4), the central atom is carbon (C), and there are no lone pairs around it.
According to the theory of VSEPR (Valence Shell Electron Pair Repulsion), the ideal angle between the carbon-chlorine bonds in carbon tetrachloride is 109.5 degrees. This angle arises from the repulsion between electron pairs around the central carbon atom. However, in practice, the actual angle between the carbon-chlorine bonds may deviate slightly from the ideal angle due to various factors such as steric hindrance, molecular strain, and the presence of other atoms or functional groups in the molecule. The ideal angle between carbon-chlorine bonds in a molecule such as carbon tetrachloride (CCl4) is 109.5 degrees, according to the theory of VSEPR (Valence Shell Electron Pair Repulsion). In reality, due to various factors, the actual angle between the carbon-chlorine bonds may deviate slightly from the ideal angle.
Learn more about atom here:
https://brainly.com/question/26952570
#SPJ11
if you measured a shift in the copper/ascorbic acid cell potential when the ph was changed, what was the origin of the shift? in other words, which half-cell potential was actually changing, the copper potential, the ascorbic acid potential, or both? (select all that apply.) when ph changes, the value of q changes. both half-cells experienced potential shifts when the ph was changed. the potential change was due to the ph change in the ascorbic acid half-cell. the ascorbic acid half-reaction contains two h ions. the ph change caused a difference in the rate of electron transfer which shifted the potential of the cu2 /cu half-cell. the reaction quotient contains a term for [h ]. the cu2 /cu half-cell did not have a role in the potential change.
Answers
The correct option and the correct order is B, C, E, G, and A, so the origin of the shift was When pH changes, the value of Q changes. The reaction quotient contains a term for [H^+].
The ascorbic acid half-reaction contains two H^+ ions. The Cu^2+/Cu half cell did not have a role in potential change. The potential change was due to the pH change in the ascorbic acid half cell.
b. When pH changes, the value of Q changes.
c. The reaction quotient contains a term for [H^+]
e. The ascorbic acid half-reaction contains two H^+ ions
g. The Cu^2+/Cu half cell did not have a role in potential change.
a. the potential change was due to the pH change in the ascorbic acid half cell.
pH is a measure of the acidity or basicity of a solution, defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+) in the solution. The pH scale ranges from 0 to 14, with 7 being neutral, values below 7 indicating acidity (higher concentration of H+ ions), and values above 7 indicating alkalinity or basicity (lower concentration of H+ ions).
The pH of a solution is an important property in many fields of science, including chemistry, biology, and environmental science. In chemistry, pH is used to describe the reactivity and stability of chemicals in solution, and is important in determining the solubility of substances. In biology, pH is a critical factor in maintaining the proper functioning of enzymes and other biochemical processes in living organisms.
To learn more about pH visit here:
brainly.com/question/491373
#SPJ4
Complete Question: -
If you measured a shift in the copper/ascorbic acid cell potential when the pH was changed, what was the origin of the shift? In other words, which half-cell potential was actually changing, the copper potential, the ascorbic acid potential, or both? (Select all that apply.)
a. The potential change was due to the pH change in the ascorbic acid half-cell.
b. When pH changes, the value of Q changes.
c.The reaction quotient contains a term for [H+].
d.Both half-cells experienced potential shifts when the ph was changed.
e.The ascorbic acid half-reaction contains two H+ ions.
f. The pH change caused a difference in the rate of electron transfer which shifted the potential of the Cu2+/Cu half-cell.
g.The Cu2+/Cu half-cell did not have a role in the potential change.
According to the law of conservation of energy, which statement must be true?
A. The total energy in a system can only increase over time.
B. Energy can change only from nuclear to chemical.
C. Energy that is tranformed is neither destroyed nor created.
D. There is only one form of energy.
Answers
Answer C.
Ecplanation:
Energy cant be created or destroyed only transformed.
Answer:
C
Explanation:
In an effort to reduce the number of fires started by cigarettes, a major tobacco company is test-marketing a cigarette in which thin layers of extra paper are used to decrease the amount of oxygen entering the cigarette, thereby slowing the rate at which it burns and lowering the heat it generates.
Answers
A major tobacco company is test-marketing a cigarette which incorporates thin layers of extra paper, which restrict the amount of oxygen entering the cigarette.
This modification slows down the burning rate and reduces the heat generated by the cigarette. To address the issue of fires caused by cigarettes, a prominent tobacco company is introducing a modified cigarette into test markets. This cigarette incorporates thin layers of additional paper, strategically placed to limit the amount of oxygen available to support combustion. By restricting oxygen flow, the burning rate of the cigarette is slowed down, reducing the heat generated in the process.
The concept behind this innovation is to create a cigarette that is less likely to ignite flammable materials if accidentally discarded or left unattended. By reducing the burning rate and heat intensity, the risk of fires caused by cigarette accidents is significantly diminished. The extra layers of paper act as a barrier, effectively decreasing the oxygen supply to the lit tobacco and minimizing the potential for ignition.
This test-marketing initiative by the tobacco company reflects an acknowledgment of the need to address fire safety concerns associated with cigarette use. While the new design may help reduce the risk of fires caused by cigarettes, it is important to note that the ultimate goal should be to promote smoking cessation and minimize the overall harm caused by tobacco use. Fire-safe cigarettes can provide a temporary solution, but efforts to discourage smoking and support individuals in quitting remain crucial for public health and safety.
Learn more about flammable here:
brainly.com/question/88576
#SPJ11
Consider the phase diagram for sulfur shown here. The rhombic and monoclinic states are two solid states with different structures.
a. Below what pressure does solid sulfur sublime?
b. Which of the two solid states of sulfur is most dense?
Answers
The pressure of solid sulfur sublime is 0.27mm.
The Monoclinic solids has a greater density than the rhombic one.
What is density?Density is a measure of the amount or mass per unit volume of a particular substance. Density is mathematically defined as mass divided by volume. Density varies for each element in the periodic table and is also affected by environmental conditions such as temperature and atmospheric pressure. Density is also affected by other substances that cause chemical reactions.
Therefore, if the pressure is less than 0.027 mm of mercury, one sublimation of the solid is seen. And if you look at the line here, it's a positive slope. This suggests that the 1s on the right side of the Mono Klinik body are denser.
To know more about density click-
https://brainly.com/question/26364788
#SPJ1
Choose the correct statement.
1. A single displacement reaction produces an element as a product.
2. A double displacement reaction occurs between an ionic and a covalent compound.
3. Products of a complete combustion reaction are carbon dioxide and water.
4. Synthesis and Decomposition reaction products cannot be predicted with certainty.
Answers
Answer:
1
Explanation:
single displacement replaces one element with another and it's product is a pure element.
applying a pesticide that you know is not registered for the site(commodity) you are treating is an example of?
Answers
Applying a pesticide that you know is not registered for the site (commodity) you are treating is an example of a violation of the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA).
What is the legal consequence of using an unregistered pesticide on a specific crop?Using an unregistered pesticide on a specific crop is a violation of FIFRA, which is enforced by the Environmental Protection Agency (EPA). FIFRA regulates the use and sale of pesticides to protect human health and the environment.
Pesticides must be registered for a specific site or crop, and using an unregistered pesticide can result in fines, legal action, or even imprisonment. It is essential to follow the guidelines and regulations set by FIFRA to ensure the safe and effective use of pesticides.
Learn more about Environmental Protection Agency
brainly.com/question/13292139
#SPJ11
how do i do this question please help me
Answers
Answer:
3
Explanation:
The reaction is given as:
H₂S + O₂ → SO₂ + H₂O
Let us balance the chemical equation.
We take some letters and we use them as the coefficient to balance the equation;
aH₂S + bO₂ → cSO₂ + dH₂O
Now,
Conserving H;
2a = 2d
Conserving S;
a = c
Conserving O;
2b = 2c + d
Let a = 1, d = 1, c = 1, b = \(\frac{3}{2}\) and multiply through by 2;
a = 2, b = 3, c = 2 and d = 2
So, the balanced reaction equation is given as;
2H₂S + 3O₂ → 2SO₂ + 2H₂O
How do you think dry cleaning works?
Answers
mark this as a brainliest
what will be the result of the reaction
(CH3COO)2+redP +Cl2
Answers
Answer:
(CH3COO)2 + redP + Cl2 → ClCH2COOH + HCl
Explanation:
This is an example of halogenation of carboxylic acids at alpha carbon atom. In this reaction, red phosphorus and chlorine are treated with carboxylic acids having alpha hydrogen atom followed by hydrolysis to form alpha chloro carboxylic acid.
Which of the following best accounts for why
malleability occurs?
(A) The highly flexible structure of the atoms due to lack
of an internal structure.
(B) The high potential energy of the substance due to the
free floating electrons.
(C) The ability of the cations to slide past one another due to the delocalization of the electrons.
(D) The repulsion of the cations for each other causes the solid to easily spread with little resistance.
Answers
The best explanation for malleability among the given options is (C) The ability of the cations to slide past one another due to the delocalization of the electrons. Option C
Malleability refers to the property of a substance to be deformed or shaped into different forms without breaking or cracking. In metallic substances, such as metals, the atoms are arranged in a closely packed lattice structure held together by metallic bonds.
These metallic bonds involve the delocalization of electrons, meaning that the valence electrons are not bound to specific atoms but instead move freely throughout the metal lattice.
The delocalization of electrons allows for the cations (positively charged ions) to slide past one another when a force is applied. As a result, the metal can be easily deformed into various shapes without disrupting the overall structure.
Option (A) is incorrect because atoms do have internal structures. Option (B) is not specific to malleability and refers more to the concept of potential energy. Option (D) does not accurately explain the mechanism behind malleability. Therefore, option (C) provides the most accurate explanation for why malleability occurs in metallic substances.
For more such questions on malleability visit:
https://brainly.com/question/12181165
#SPJ8
PLEASE HELP!! GIVING BRAINLIEST
Answers
Answer:
The answer is "0.00172172603".
Explanation:
Given:
\(Mass (M) = 1.60 \times 10^{-3} \ g\\\\Density (D) = 9.293 \times 10^{-1} \ \frac{g}{cm^3}\\\\Volume (V) = ?\)
Formula:
\(\to \bold{V = \frac{M}{D}}\)
\(= \frac{1.60 \times 10^{-3}}{9.293 \times 10^{-1}} \\\\ = \frac{1.60 \times 10^{1}}{9.293 \times 10^{3}} \\\\ = \frac{1.60 \times 10}{9.293 \times 1000} \\\\ = \frac{1.60 }{9.293 \times 100} \\\\ = \frac{1.60 }{929.3 } \\\\= 0.00172172603\)
PLZ ANSWER REALLY FAST NO JOKES
A piece of nickel at 25 °C is dropped into a glass of water at 25 °C. Which statement is correct?
Heat will flow from the nickel to the water in the glass.
Heat will flow from the water in the glass to the nickel.
There will be no transfer of heat from the nickel to the water in the glass.
The final temperature of water and nickel will be 0 °C.
Answers
Answer:
The temperature of the water in both beakers will decrease
Explanation:
Answer:
I believe it's C. "There will be no transfer of heat from the nickel to the water in the glass."
Explanation:
there won't be any transfer of heat from the nickel to the water in the glass because both the nickel and the glass of water are at the same temperature.
What is the maximum mass of ammonia that can be formed when 36.52 grams of nitrogen gas reacts with 10.62 grams of hydrogen gas according to the following equation? Please round your answer to the nearest 0.01 gram.
N2 + 3 H2 = 2 NH3
Answers
The maximum mass of NH₃ that can be formed when 36.52 g of N₂ reacts with 10.62 g of H₂ is 44.35 g
Balanced equationN₂ + 3H₂ —> 2NH₃
Molar mass of N₂ = 14 × 2 = 28 g/mol
Mass of N₂ from the balanced equation = 1 × 28 = 28 g
Molar mass of H₂ = 2 × 1 = 2 g/mol
Mass of H₂ from the balanced equation = 3 × 2 = 6 g
Molar mass of NH₃ = 14 + (3×1) = 17 g/mol
Mass of NH₃ from the balanced equation = 2 × 17 = 34 g
SUMMARY
From the balanced equation above,
28 g of N₂ reacted with 6 g of H₂ to produce 34 g of NH₃
How to determine the limiting reactantFrom the balanced equation above,
28 g of N₂ reacted with 6 g of H₂
Therefore,
36.52 g of N₂ will react with = (36.52 × 6) / 28 = 7.83 g of H₂
From the above calculation, we can see that only 7.83 g out of 10.62 g of H₂ are required to react completely with 36.52 g of N₂.
Therefore, N₂ is the limiting reactant
How to determine the maximum mass of NH₃ producedFrom the balanced equation above,
28 g of N₂ reacted to produce 34 g of NH₃
Therefore,
36.52 g of N₂ will react to produce = (36.52 × 34) / 28 = 44.35 g of NH₃
Thus, the maximum mass of NH₃ obtained from the reaction is 44.35 g
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ1
Think of the different types of reactions you have learned about. How can you tell if they absorb energy or release energy, and at the molecular level, how are they different?
Answers
Answer:
Absorbed will be harder to spot than releasing because take this as it's like a tire. A tire will go smaller when it has no air compared to when it has air. But absorbed it the opposite. It gets bigger with more air and etc.
Explanation:
My answer don't copy and paste change it a little.
When solid materials are heated.the heat absorbed/added to the materials caused the materials to change its form
Answers
Complete question is;
When solid materials are heated.the heat absorbed/added to the materials caused the materials to change its form from?
Answer:
From solid to liquid
Explanation:
When we heat solid materials, the heat causes the forces of attraction between the molecules to become weaker and as such, the material becomes more loose than it was in the solid state. As a result, the material now becomes a liquid because the molecules now have lesser forces of attraction and are a bit loose.
A researcher grew a plant in an illuminated chamber with 18o-radiolabeled co2. After allowing time for photosynthesis, where will the radiolabeled 18o be found?.
Answers
After allowing time for photosynthesis, the ¹⁸O-radiolabeled CO₂ will be found in glucose, C₆H₁₂O₆ in the plant.
What is photosynthesis?Photosynthesis is the process by which green plants manufacture their food using the energy of sunlight.
During photosynthesis, plants convert carbon dioxide, CO₂, and water vapor present in the atmosphere to glucose using the energy of the sunlight to power the reactions.
Considering the given research work:
A researcher grew a plant in an illuminated chamber with ¹⁸O-radiolabeled CO₂.
After allowing time for photosynthesis, the ¹⁸O-radiolabeled CO₂ will be incorporated into the glucose produced by the plant during photosynthesis.
The glucose produced is then stored as starch.
Learn more about photosynthesis at: https://brainly.com/question/26568636
#SPJ1
Complete question:
A researcher grew a plant in an illuminated chamber with ¹⁸O-radiolabeled CO₂. After allowing time for photosynthesis, where will the radiolabeled ¹⁸O be found?
A. O₂ in the chamber
B. H₂O in the plant
C. H₂O vapor in the chamber
D. C₆H₁₂O₆ in the plant