Please help me

1. Rank the following items from MOST
inertia to LEAST inertia: Chick Fil A
Biscuit, Feather, Elephant, a 1st grader.

Answer:

M= -10/4

M = -5/2

-5/4 + m = -15/4

Explanation:

3/4 + m = -7/4

Subtract 3/4 from both sides

3/4 + m - 3/4 = -7/4 - 3/4

m = (-7-3) / 4

m = -10/4

m = -5/2

Check the options

11/4 + m = -1/4

m = -1/4 - 11/4

m = (-1-11) /4

m = -12/4

m = -3

-5/4 + m = -15/4

m = -15/4 + 5/4

m = (-15+5) /4

m = -10/4

m = -5/2

Answer:

from the cup to the hand

Explanation:

Conduction is the heat transfer due to contact between object. During conduction, heat energy is transferred by contact from a body with higher temperature (hotter body) to a body with lower temperature (cooler body).

When a person with body temperature of 36°C comes in contact with a cup of coffee with temperature of 90°C, heat is transferred from the cup to the hand because the cup is hotter.

Answer:

Explanation:

Time for one dot = 1 /50 = .02 s

Distance between 3 rd and fourth dot is 3 cm and time taken to travel this distance is .02 s

velocity = 3 cm / .02 = 150 cm /s

Distance between 4 th and 5 th  dot is 4 cm and time taken to travel this distance is .02 s

velocity = 4 cm / .02 = 200 cm /s

change in velocity = 200 cm/s  - 150cm/s = 50 cm /s

Time taken = .02 s

Acceleration = 50 / .02 cm/s²

= 2500 cm/s²

The total resistance of the circuit The sum of the resistance of resistors in the circuit is given as;`

The capacitance and the resistance are then used to determine the time constant;`τ = R × C``τ = 10.5 Ω × 3.5 × 10⁻⁶ F``τ = 36.75 × 10⁻⁶ s`The time constant is `τ = 36.75 × 10⁻⁶ s`.

The initial charge of the capacitor can be given as: `

The charge on the capacitor after `t` seconds can be given as: `

Substitute the values found above into the expression:`

Resistors is an electronic component that inhibits electric current. Resistors are included in passive components because these components do not require an electric current to work. Resistors are made of tubular material or carbon and ceramic materials.Judging from the resistance value, resistors can be categorized into two types, namely fixed resistors and variable resistors.

Learn More About Resistors at https://brainly.com/question/24858512

#SPJ11

Explanation:

centripetal force is a force that makes a body follow a curved path. for example, twirling,a lasso, cream seperator etc.

A force that causes an objectmoving in a circular path to move out and away from the centres of it's path is centrifugal force. for example,drifting, banked roads, washing machine etc.

Circular motion is a movement of an object along the circumference of a circle or rotation along a circular path. for example, stirring batter, stone tied to a string etc

hope its helpfull♡

The surface area of a house is an important factor for house painters to consider when determining how much to charge for their services. While there may be additional factors that can impact the cost of the job, such as the type of paint being used or the complexity of the project, the surface area is a key factor that should not be overlooked.

A house painter typically considers the surface area in square feet of the house when determining how much to charge for painting services. This is because the surface area of a house directly impacts the amount of paint and supplies that will be needed for the job, as well as the amount of time it will take to complete the project.

To determine the surface area of a house, the painter will typically measure the length and height of each wall, and then multiply those numbers together to get the total square footage. They may also factor in the surface area of any additional features, such as doors, windows, and trim.

Once the surface area has been determined, the painter will typically use this information to calculate an estimate for the job. This estimate will typically take into account the cost of materials, the amount of time required to complete the job, and any additional factors such as travel expenses or difficult working conditions.

Overall, the surface area of a house is an important factor for house painters to consider when determining how much to charge for their services. While there may be additional factors that can impact the cost of the job, such as the type of paint being used or the complexity of the project, the surface area is a key factor that should not be overlooked.

To know more about surface area, refer

https://brainly.com/question/16519513

#SPJ11

Explanation:

The contents of alcohol are less toxic and will evaporate quickly as compared to the mercury-in-glass thermometer. Since, alcohol starts boiling at 80℃ while the boiling point of mercury is 375℃. ... So, an alcohol thermometer cannot measure the temperature of boiling water as it has the limit to measures up to 80℃.

On planets like Venus, Earth, and Mars do not see as many craters because most of them have been eroded away by wind, rain or volcanic activity. We do not see any craters Jupiter, Saturn, Uranus, and Neptune because there is no visible solid surface for the meteors to hit.

Craters heavily dominate the surfaces of Mercury and the Earth's Moon because both the bodies lack water on their surfaces that would erode impact craters with time. They also lack an atmosphere which could disintegrate meteoroids before they impact the surface.

As smaller planets have less gravitational pull as compared to large planets therefore impactors will strike at lower speeds. Greater is the mass of the impactor, greater is the size of crater. Craters are often circular.

To know more about craters, refer

https://brainly.com/question/7012368

#SPJ13

A trait shared by dolphins and bats  will be the need to move quickly through dark environments.

Our understanding of the evolution of echolocation in bats has shifted as a result of recent molecular phylogenies. These phylogenies imply that bats with advanced echolocation

According to one interpretation of these trees, laryngeal echolocation originated in the ancestor of all living bats. Echolocation may have been lost in Old World fruit bats

The vast adaptive radiation in echolocation call design is substantially controlled by ecology, demonstrating how environmental perceptual problems influence call design.

A trait shared by dolphins and bats that possibly led to the evolution of echolocation in these two animal groups will be the need to move quickly through dark environments.

Hence option A is correct.

To learn more about the evolution of echolocation refer to the link;

https://brainly.com/question/20789287

Answer:

D

Explanation:

Answer:

1.F = 256 N

2.a = 8 m/s/s

By looking at the given information, you know force, and an acceleration. Therefore you have enough information to use the first formula.

F = ma

256 N = m * 8 m/s/s

m = 256 N/8 m/s/s

m = 32 Kg

6P₀V₀ is the work done by the gas during process 1→3→6.

The work performed by a gas expanding against an external pressure is negative, analogous to the work performed by a system on its surroundings. In contrast, when a gas is compressed externally, V₀ and the work is positive because the environment exerts force on the system.

The gas must release some energy into the environment when it expands in response to an external pressure. The overall energy of the gas is thus reduced as a result of the negative work. When a gas is compressed, energy is transferred to it, increasing its energy as a result of positive work.

Let's consider,

Work done = -W (As the energy is released)

External pressure = P₀

Volume of gas = V₀

So, the work done can be calculated as follows:

W = P x (dV)

-W = P₀ × V₀

Now according to the process given:

1→3→6

Energy flow increases up to 6.

Hence, the energy of the system (work done) is:

-W = 6 × P₀ × V₀

-W = 6P₀V₀

Learn more about  work done by the gas,

brainly.com/question/18403855

#SPJ1

To explain the tangent plane to the surface, `z = 53 − x² − 2y²` at the point `(3, 2, 6)`, let us first determine the partial derivatives of `z` with respect to `x` and `y`.

Partial derivative of `z` with respect to `x`, `∂z/∂x = -2x`Partial derivative of `z` with respect to `y`, `∂z/∂y = -4y`Now, let's find the gradient vector `grad z` at `(3, 2, 6)` and the value of `z` at `(3, 2)`.gradient vector `grad z = (-2x, -4y, 1)`gradient vector `grad z = (-6, -8, 1)` at `(3, 2, 6)`.Value of `z` at `(3, 2)` is given by `z = 53 - 3² - 2(2)² = 39`.

Therefore, the equation of the tangent plane to the surface `

z = 53 − x² − 2y²` at `(3, 2, 6)` is:

`z - 6 = -6(x - 3) - 8(y - 2)`

which can be written as:`6x + 8y + z = 50`Thus, the equation of the tangent plane to the surface `z = 53 − x² − 2y²` at the point `(3, 2, 6)` is `6x + 8y + z = 50`.

To know more about Partial derivative visit:-

https://brainly.com/question/32387059

#SPJ11

Answer:

Density=mass/volume.

1) we have to calculate the iron volume in liters.

iron volume=second level - first level=49.10 ml-45.50 ml=3.6 ml

3.6 ml=3.6 ml(1 liter / 1000 ml)=0.0036 liters  

2) we calculate the mass iron in kg.

28.5 g=28.5 g(1 kg /1000 g)=0.0285 kg.

2) we calculate the density of iron.

density=0.0285 kg / 0.0036 liters=7.92 kg/L

7.92 kg/l=7.92 kg/L(1000 g/1Kg)(1000 cm³/1 L)=7.92 g/cm³.

From this information the Iron density is 7.92 Kg/L or  7.92 g/cm³.

Explanation:

I hope this helps u! :D

Answer:

7.92 g/cm^3

Explanation:

1 mL = 1 cm^3

density = mass/volume

volume: 49.10 mL - 45.50 mL = 3.60 mL = 3.60 cm^3

mass: 28.5 g

density = (28.5 g)/(3.60 cm^3) = 7.91666... g/cm^3

Answer: 7.92 g/cm^3

1. Connect the DC motor with a potentiometer to the Arduino board, along with a temperature sensor and an IR sensor with an LED.

2. Write the necessary code to integrate all the sensors and control the motor based on the inputs.

To connect a DC motor with a potentiometer to an Arduino board, you will need to use a motor driver module that can handle the power requirements of the motor. The motor driver module allows you to control the speed and direction of the motor using the Arduino. Connect the motor to the appropriate terminals on the motor driver module and the potentiometer to an analog input pin on the Arduino. The potentiometer will act as a voltage divider, allowing you to vary the input voltage to control the motor speed.

Next, connect a temperature sensor that can measure temperatures in the range of -10 to +45 degrees Celsius. Depending on the type of temperature sensor you are using, you may need to follow specific wiring instructions provided by the manufacturer. Connect the temperature sensor to the appropriate digital or analog input pin on the Arduino board.

Lastly, connect an IR sensor with an LED to detect motor overspeed. The IR sensor can be used to measure the rotational speed of the motor by detecting interruptions in the infrared beam caused by the rotating motor shaft. If the motor speed exceeds the threshold of 25,000 rpm, the IR sensor will trigger an output to activate the LED as a signal.

To make all the sensors work together, you will need to write code using the Arduino programming language. Use appropriate libraries and functions to read the sensor values and implement the desired logic for motor control and overspeed detection. You can define temperature thresholds and motor speed limits in the code and take appropriate actions based on the sensor readings.

Learn more about potentiometer

brainly.com/question/32634507

#SPJ11

Answer

#1. number of valence electrons

#2. oxygen

#3. Rubidium has more protons and more electrons than calcium.

#4. 20

#5. helium (he)

Explanation:

Answer:

Rubidium has more protons and more electrons than calcium.

Explanation:

for connexus honors chemistry unit 3 lesson 3 quick check :)

The statement : Compare and contrast light independent and light dependent reactions is true.

Light-independent reactions, also known as the Calvin cycle or the dark reactions, occur in the stroma of chloroplasts. They do not require light energy directly and can occur in the absence of light.

These reactions utilize the products of the light-dependent reactions, such as ATP and NADPH, to convert carbon dioxide into glucose through a series of enzyme-catalyzed reactions. The light-independent reactions are responsible for the synthesis of carbohydrates and other organic compounds.

On the other hand, light-dependent reactions occur in the thylakoid membrane of chloroplasts and require light energy. They involve the absorption of light by chlorophyll and other pigments, which excite electrons and create an electron transport chain. The energy from the excited electrons is used to generate ATP and NADPH, which are utilized in the light-independent reactions. Additionally, light-dependent reactions produce oxygen as a byproduct through the splitting of water molecules.

In summary, light-dependent reactions capture light energy and convert it into chemical energy (ATP and NADPH), while light-independent reactions utilize that chemical energy to fix carbon dioxide and synthesize carbohydrates.

To know more about the Calvin cycle refer here,

https://brainly.com/question/26846190#

#SPJ11

Complete question :

Compare and contrast light independent and light dependent reactions. T/F

Ice at 0 degrees celsius is mixed with water at 0 degrees celsius in a perfectly insulated calorimeter.what happens depends on the relative masses of ice and water,some of the ice will melt and the final temperature will be 0 degrees Celsius.So the correct options are 1,2 and 3.

The amount of ice that melts depends on the relative masses of ice and water. If there is more ice than water, then all of the ice will melt. If there is more water than ice, then some of the ice will remain. The final temperature will be 0 degrees Celsius regardless of how much ice melts.

Option 4 is incorrect because the water is already at 0 degrees Celsius, so it cannot freeze. Option 3 is incorrect because heat is not being transferred into or out of the system, so the temperature will not change.Therefore correct option are 1, 2 and 3.

To learn more about calorimeter visit: https://brainly.com/question/2963957

#SPJ11

For the gopher tortoise population to survive over the long run, efforts need also be done to address the underlying causes of habitat loss and fragmentation.

A species of organism's habitat is its natural environment, where it may survive and flourish. It encompasses every element physical, biological, and environmental necessary for the existence and procreation of that species. Examples include food, water, shelter, and space. From a small woodland patch to an entire biome or ecosystem, habitats can range greatly in size.

Wild tortoises could be moved to zoos or aquariums with greater regulations safeguarding them. This would aid in preventing future deterioration, fragmentation, and loss of the habitat for the tortoises as a result of human activity. Protecting the tortoises and their burrows would be easier to enforce under conservatory rules. Relocating tortoises, however, should only be done when absolutely required and with prudence because it can spread illness and is just a temporary fix. For the gopher tortoise population to survive over the long run, efforts need also be done to address the underlying causes of habitat loss and fragmentation.

To know more about habitat, visit:

brainly.com/question/28815163

#SPJ1

Answer:

(a) 3.22 m

(b) The vertical velocity, \(v_y\), at maximum height is 0 m/s, the horizontal velocity, vₓ, is 12.72 m/s

(c) The acceleration at maximum height = g = 9.81 m/s²

(d) The time it takes for the paper to reach the balcony is 1.212 seconds

(e) The horizontal range, of the paper is 15.42 m.

Explanation:

(a) Given that we re given a projectile motion, we have the following governing equations;

y = y₀ + v₀·sin(θ₀)·t - 0.5×g·t²

\(v_y\) = v₀·sin(θ₀) - g·t

Where:

y = Height of the paper

y₀ = Initial height of the paper = Ground level = 0

v₀ = Inititial velocity of the paper = 15.0 m/s

θ₀ = Angle in which the paper is thrown = 32° above the horizontal

g = Acceleration due to gravity = 9.81 m/s²

t = Time taken to reach the height h

\(v_y\) = Vertical velocity of the paper

At maximum height, \(v_y\) = 0, therefore;

\(v_y\) = v₀·sin(θ₀)·t - g·t = 0

v₀·sin(θ₀) = g·t

t = v₀·sin(θ₀)/g = 15×sin(32°)/9.81 = 0.81 seconds

y = y₀ + v₀·sin(θ₀)·t - 0.5×g·t² = 0 + 15×sin(32°)×0.81-0.5×9.81×0.81² = 3.22 m

(b) The vertical velocity, \(v_y\), at maximum height = 0 m/s, the horizontal velocity, vₓ, = 15×cos(32°) = 12.72 m/s

(c) The acceleration at maximum height = g = 9.81 m/s²

(d) The time it takes to maximum height = 0.81 seconds

The time the paper will take to fall to 1.25 m above the ground, which is 3.22 - 1.25  = 1.97 meters below maximum height is therefore given as follows;

y = y₀ + v₀·sin(θ₀)·t - 0.5×g·t²

Where:

v₀ = 0 m/s at maximum height

y = -1.97 m downward motion

y₀ = 0 starting from maximum height downwards

1.97 = 0 + 0·sin(θ₀)·t - 0.5×9.81×t²

-1.97 =  - 0.5×9.81×t²

t = (-1.97)/(-0.5*9.81) = 0.402 seconds

The time the paper will take to fall to 1.25 m above the ground = 0.81+0.402 = 1.212 seconds

Therefore, the time it takes for the paper to reach the balcony = 1.212 seconds

(e) The horizontal range, x, is given by the relation;

x = x₀ + v₀·cos(θ₀)·\(t_{tot}\)

x₀ = Starting point of throwing the paper = 0

\(t_{tot}\) = Total time of flight of the paper

∴ x = x₀ + v₀·cos(θ₀)·\(t_{tot}\) = 0 + 15×cos(32°)×1.212 = 15.42 m

The horizontal range, of the paper = 15.42 m.

The maximum force that the athlete exerts on the bag is equal to 1,500 N and in the opposite direction as the force that the bag exerts on the athlete.

Newton's third law of motion states that action and reaction are equal and opposite.

Fa = -Fb

The force exerted by the athlete on the bag is equal to the force the bag exerted on the athlete but in opposite direction.

Thus, the maximum force that the athlete exerts on the bag is equal to 1,500 newtons and in the opposite direction as the force that the bag exerts on the athlete.

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

Answer:potential difference is more or less like voltage. Using ohms, V=IR

Where V is Voltage

I is Current =0.4A

R is Resistance=20ohms

V=0.4*20

V=8V

Hence the potential difference will be 8V.

ii) V=0.4*30

V=12V

Explanation:

The voltage of potential difference is directly proportional to the current and the resistance. So if one increase or decrease, it will have impact on the other.

From the calculations, when the resistance increase, the voltage will increase to appreciate the change.

Answer:

Force = mass × acceleration

Acceleration:

\({ \tt{15 = (22 \times a)}} \\ { \tt{a = \frac{15}{22} \: {ms}^{ - 2} }}\)

From first Newton's equation of motion:

\({ \bf{v = u + at}} \)

Change = v - u:

\({ \tt{v - u = (a \times t)}} \\ { \tt{v - u = ( \frac{15}{22} \times 1.2) }} \\ { \tt{v - u = 0.82 \: {ms}^{ - 2} }}\)

Answer:

xitxutdtidtiittieitetdtdt

Answer:

Please find the attached file

Explanation:

Answer:

The human eye is capable of detecting light within a specific range of wavelengths known as the visible spectrum.

Explanation:

The visible spectrum ranges from approximately 400 to 700 nanometers (nm). This range includes the colors of the rainbow, from violet (shorter wavelength) to red (longer wavelength).

Answer:

see below

Explanation:

frequency of a wave is the number of complete waves produced per second

so 70 Hz

means, that 70 complete waves are produced in one second,

hope this helps

The image formed by refraction is at a distance of 120cm behind the lens and its magnification is 4.

The image formation by refraction and magnification of an object in water 30 cm from the vertex of a convex surface made of plexiglass with a radius of curvature of 80 cm can be calculated using the following steps:

1. Determine the object's distance from the lens. Object distance (u) = -30 cm. (negative sign as per the convention of the mirror)

2. Determine the focal length of the lens using the formula:

f = R/2 where, f = focal length of the lens, R = radius of curvature of the lens.

So, f = 80/2 = 40 cm.

3. Use the mirror formula to determine the image distance from the surface:

1/f = 1/v + 1/u where,v = image distance from the surface.

Substituting the given values (with proper sign convention), we get:

(-1/40) = 1/v + (-1/30)

Solving for v, we get:

v = 120 cm.

5. Use the magnification formula to determine the magnification of the image:

m = -(v/u)

where,m = magnification, v = 120 cm, u = 30 cm

Therefore,m = -(120/-30) = 4

Therefore, the image will form at a distance of 120 cm from the lens on the water side of the lens and is magnified by a factor of 4.

To know more about refraction, refer here:

https://brainly.com/question/26528081#

#SPJ11

Answer:

The answer is

Explanation:

The mass of an object given it's momentum and velocity / speed can be found by using the formula

\(m = \frac{p}{v} \\ \)

where

m is the mass

p is the momentum

v is the speed or velocity

From the question

p = 280 kg/ms

v = 10 m/s

The mass of the object is

\(m = \frac{280}{10} = 28 \\ \)

We have the final answer as

Hope this helps you