.Consider the following thermochemical equation for the combustion of acetone (C3H6O), the main ingredient in nail polish remover. C3H6O(l)+4O2(g)→3CO2(g)+3H2O(g)ΔH∘rxn=−1790kJ
Part A : If a bottle of nail polish remover contains 174 mL of acetone, how much heat would be released by its complete combustion? The density of acetone is 0.788 g/mL. |ΔH| | Δ H | = kJ

This significant change in the Earth's atmosphere is marked by the emergence of redbeds, sediments that contain oxidised iron.

The release of oxygen into the atmosphere led to the formation of minerals on land (continental redbeds). Since the created oxygen was absorbed by rocks for a very long time, as seen in Banded Iron Formations (BIFs) and continental red beds, it did not accumulate in the atmosphere for very long. The majority of the oxygen created over time is still preserved in the historic "banded rock" and "red bed" formations. The growth of oxygen may have been significantly influenced by the oxidation of the mantle rocks. It has been suggested that the shift from subaerial to mostly submerged volcanoes may also have resulted in a decline in volcanic emission of decreased gases.

To learn more about iron click here   https://brainly.com/question/18500540

#SPJ4

The reaction between the t-amyl alcohol to t-amyl chloride can be performed without using HCl. The SN1 mechanism needs to be present to affect the transformation of the alcohol to the chloride.

Hydrogen chloride (HCl), a gas at standard pressure and temperature, is a compound of the elements hydrogen and chlorine. Hydrochloric acid is the name for the gas's water solution.

Chlorides are created when active metals and their oxides, hydroxides, and carbonates react with gaseous hydrogen chloride.

Only in the presence of moisture do these reactions happen easily. Hydrogen chloride that has never been wet is very inert.

The reactions of hydrochloric acid are those of conventional strong acids, including those with metals in which hydrogen gas is displaced, reactions with basic (metal) oxides and hydroxides that are neutralized by the creation of a metal chloride and water, and reactions with weak acid salts in which the weak acid is expelled.

To know more about hydrochloric acid, visit:

https://brainly.com/question/24586675

#SPJ4

827.0 torr  is the total pressure, in torr, exerted by the gas mixture

The partial pressures of the individual gases make up the total pressure of the gas mixture.

Total pressure= sum of all partial pressure

Total pressure=423+149+255

Total pressure= 827.0 torr

Pressure is defined as force/area. To illustrate the pressure from snow on a roof, divide the weight of the snow by the surface area of the roof. Gases are a typical pressure source in chemistry. A "vacuum" is used to describe the absence of pressure. Humans have long held the belief that vacuums are both improbably rare and unnatural because "nature abhors a vacuum." Actually, this is not the case.

The number of pressure units is ridiculous. It's common to use the torr or mmHg unit. This discussion is solely focused on the height of a mercury column. The atmosphere contains 760 torr, or mmHg. You might also look at mmH2O, which makes use of a related idea.

To know more about  pressure visit : brainly.com/question/18124975

#SPJ4

Protein is the main nutrient that helps in the repair of tissue. Protein provides the amino acids that the body needs to build and repair cells and tissues. Other nutrients that aid in tissue repair include carbohydrates, fats, vitamins, and minerals.

The Mass of gas released is 1.06g

The mass of a gas is the total amount of matter that is present in a particular sample of gas. This includes the mass of any particles suspended in the gas, such as dust or particles of a particular element, as well as the mass of the gas itself. The mass of a gas is determined by measuring the density of the gas, and then multiplying it by the volume of the sample.

The mass of gas released can be calculated as follows:

Mass of dry tablet before reaction is 2.92g

Mass of gas released = Mass of dry tablet before reaction - Mass of tablet after reaction

Mass of gas released = 3.98g - 2.92g = 1.06g

Therefore,The Mass of gas released is 1.06g

learn more about gas Refer:brainly.com/question/14812509

#SPJ4

Answer:

Explanation:

The Key results in the Lab guide are results that justify the reasons to either accept or reject a hypothesis.

To summarize data related to findings in an experiments we make use of diagrams that shows the relationship between the different data.

Although the Lab guide in the question is missing a general answer within the scope of your question is provided above

Key results in an experiment are either milestone results leading to the final result of an experiment or results obtained that might not be part of the experiment but very important to the success of the experiments. therefore results that leads to the acceptance or rejection of a hypothesis in an experiment is a key result.   while

The best way to summarize data related to findings is the use of diagrams. ( graphical representation of the relationships between data contained in an experiment )

Hence we can conclude that use of diagrams is the best way to show the relationship between different data related to experimental findings while key results are results that justifies the acceptance of a hypothesis.

Answer:

Covalent compounds are typically liquids or gases at room temperature, although the more complex and the larger the molecule, the greater the chance that it could exist as a solid.

Explanation:

From desch.org

To prepare 100 ml of a solution with 0.5 M KMnO4 and 1 M H2SO4, we need to calculate the amount of each compound needed.

For KMnO4:
0.5 M = 0.5 mol/L
0.5 mol/L × 0.1 L = 0.05 mol
0.05 mol × 158.034 g/mol = 7.9017 g

Therefore, we need 7.9017 g of KMnO4 to prepare the solution.

For H2SO4:
1 M = 1 mol/L
1 mol/L × 0.1 L = 0.1 mol
0.1 mol ÷ 18 M = 0.00556 L = 5.56 ml

Therefore, we need 5.56 ml of 18 M H2SO4 to prepare the solution.

In conclusion, to prepare 100 ml of a solution with 0.5 M KMnO4 and 1 M H2SO4, we need 7.9017 g of KMnO4 and 5.56 ml of 18 M H2SO4.

To know more about permanganate test refer here:

https://brainly.com/question/30087623

#SPJ11

Answer:

amylase

Explanation:

Answer:

This is true. A seismograph measures the size of a volcano eruption by detecting the vibrations that are produced by the volcanic activity. The vibrations can then be converted into a numerical value that represents the magnitude of the eruption.

Explanation:

The molecule has a trigonal pyramidal structure with 3 outside atoms and 1 lone pair in the core atom.

Yes, the electron and molecular geometry are identical when there are no lone pairs surrounding the main atom in a molecule.

The overall molecular shape (referred to as the molecule geometry) changes as a result of the repulsion of lone pairs, but the electron geometry is unaffected.

When a bond is formed, the electron pairs are repelled from one another and move as far apart as they can. A molecule with a distinctive geometric pattern is the outcome of this.

Five valence electrons, three of which form bond pairs with chlorine atoms, surround the core nitrogen atom in the NCl3 molecule. As a result, NCl3 has a trigonal pyramidal molecular structure and a tetrahedral electron geometry.

Learn more about molecular geometry here:-

https://brainly.com/question/27590943

#SPJ4

Hexa-2,4-diene-1,6-diol,cis,cis- Muconic alcohol is the name of this Molecule.

The chemical compound 2,4-Dinitrophenol (often known as 2,4-DNP or simply DNP) has the formula HOC6H3(NO2)2. It smells pleasant and musty and is a yellow, crystalline substance. It is soluble in the majority of organic solvents as well as aqueous alkaline solutions, sublimates, and is volatile with steam.

Picric acid is a base that can be made into picramic acid, also known as 2-amino-4,6-dinitrophenol, by neutralizing it with an alcoholic solution of ammonium hydroxide. The resulting solution is then treated with hydrogen sulfide, which causes it to turn red and produce sulfur and red crystals.

To know more about Molecule visit:-

https://brainly.com/question/19556990

#SPJ4

Answer:

B. Azimuthal

Explanation:

The Azimuthal quantum number tells you the shape of the electron cloud. It is also known as the orbital angular momentum quantum number.

Answer:

A because density DOES have a unit

Explanation:

Answer:

Thomson's plum pudding model of the atom had negatively-charged electrons embedded within a positively-charged "soup." Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.

It will be necessary to make the adjustment that Rayleigh as well as Love's waves go through both solids and liquids. Therefore, the correct option is option B.

An acoustic wave that passes through into the Earth or perhaps another planetary body is called a seismic wave. It can be caused by a major landslide, a volcanic eruption, a magma flow, an earthquake (or typically a quake), a massive man-made explosion that releases low-frequency acoustic energy, or an earthquake.

Seismologists study seismic waves, which they record using seismometers, hydrophones (under water), or accelerometers. It will be necessary to make the adjustment that Rayleigh as well as Love's waves go through both solids and liquids.

Therefore, the correct option is option B.

To learn more about seismic wave, here:

https://brainly.com/question/13056218

#SPJ1

Your question is incomplete but most probably your full question was,

"The following table was made to compare the different seismic waves. What correction needs to be made?

A. Rayleigh waves have a rolling movement and Love waves have a horizontal movement perpendicular to the wave.

B. Rayleigh and Love waves travel through solid and liquid.

C. Rayleigh and Love waves are body waves, and P-waves and S-waves are surface waves.

D. P-waves have a vertical movement perpendicular to the wave and D-waves have a compression movement."

The concentration of the acetic acid before titration is 0.1283m

25 ml CH_3 COOH  titrated with \($0.1067 \mathrm{~m}$\)\($\mathrm{NaOH}$\) of \($30.07 \mathrm{ml}$\) where solution change colour, meany Equivalence point occurs. where

\($$n_{\text {acid }}=n_{\text {base }}$$\)

\($\Rightarrow m_{\text {acid }} v_{\text {acid }}=m_{\text {base }} v_{\text {base}$\)

\($\left[\mathrm{CH}_3COO\mathrm{H}\right]=\frac{\left[\mathrm{NaOH}\right] \times V_{\mathrm{NaOH}}}{\mathrm{V}_{\mathrm{CHOOH}}}$\)

\($=\frac{(0.1067 \mathrm{~m}) \times(30.07 \mathrm{~ml})}{(25 \mathrm{ml})}$\)

\($=\frac{3.20847}{25} \mathrm{~m}$\)

\($=0.1283 \mathrm{~m}$\)

Acetic acid, which has the molecular formula CH3COOH, is also referred to as ethanoic acid, ethylic acid, vinegar acid, and methane carboxylic acid. As a byproduct of fermentation, acetic acid gives vinegar its distinctive smell. About 4-6% of the acetic acid in vinegar is water.

To learn more about Acetic acid visit:https://brainly.com/question/15202177

#SPJ4

Answer:

Calcium-41 is called a cosmogenic nuclide, because it is created by energetic cosmic rays impacting matter in a fission reaction, called spallation.

Explanation:

One of the most commonly known catalysed reaction is that of Hydrogen Peroxide turning into Water

In this reaction, we can use Potassium Permanganate (KMnO₄) or Palladium (Pd) as a catalyst.

These catalysts helps Hydrogen Peroxide turn into water and oxygen

Catalyst: Substances that change the rate of a chemical reaction and themselves remain chemically unchanged after the reaction are called catalysts.

Example:- In the process of manufacturing of ammonia Fe is used as Catalyst.

\(N _{2} (g)+ 3H _{2} (g) \huge \rightarrow {}^{Fe}\rightarrow \small{3NH _{3}(g)}\)

Note:- there is only one arrow. I was unable to put iron over the arrow ..

The pH of the solution is approximately 4.75.This indicates that the solution is slightly acidic.

To calculate the pH of the solution, we need to determine the concentration of acetate ions and acetic acid. First, let's find the number of moles of sodium acetate:

Mass of sodium acetate = 5.60 g

Molar mass of sodium acetate (CH3COONa) = 82.03 g/mol

Number of moles of sodium acetate = 5.60 g / 82.03 g/mol = 0.068 mol

Next, we need to find the number of moles of acetic acid:

Volume of acetic acid = 15.0 mL = 0.015 L

Concentration of acetic acid = 18.5 M

Number of moles of acetic acid = 18.5 mol/L * 0.015 L = 0.278 mol

Now, we can calculate the total volume of the solution:

Total volume = 1.50 L

The total moles of acetate ions can be calculated by summing the moles of sodium acetate and acetic acid:

Total moles of acetate ions = 0.068 mol + 0.278 mol = 0.346 mol

Now, we calculate the molarity (M) of the acetate ions:

Molarity of acetate ions = Total moles of acetate ions / Total volume

= 0.346 mol / 1.50 L = 0.231 M

Since sodium acetate is a strong electrolyte, it will dissociate completely in water, providing an equal concentration of acetate ions (0.231 M). The concentration of acetic acid is 0.278 M (determined earlier).

The Henderson-Hasselbalch equation can be used to calculate the pH of the solution:

pH = pKa + log([Acetate]/[Acetic Acid])

The pKa of acetic acid is 4.76.

pH = 4.76 + log(0.231/0.278)

≈ 4.75

The pH of the solution is approximately 4.75. This indicates that the solution is slightly acidic. The calculation involved determining the concentrations of acetate ions and acetic acid in the solution and using the Henderson-Hasselbalch equation to calculate the pH.

To know more about pH visit :

https://brainly.com/question/12609985

#SPJ11

Two possible sources of systematic (determinate) error in the experiment are; Incorrect calibration of volumetric glasswareIncorrect mass of NaCl

To calculate the concentration of NaCl in the resulting solution in mg/L NaCl, we can use the formula; Concentration (mg/L) = (Mass of solute ÷ Volume of solution in L) × 1000 g / 1 mg NaCl is present in the stock solution of 25 mL. So, the mass of NaCl in the solution would be;0.0842 g ÷ 25 mL = 0.00337 g/mL. Now, in the resulting solution, a 1.00 mL aliquot of the stock solution is transferred to a 50.00 mL volumetric flask and diluted to volume. Therefore, the volume of the resulting solution is 50.00 mL. We will substitute these values in the formula, Concentration (mg/L) = (0.00337 g/mL ÷ 50 mL) × 1000 g / 1 mg concentration (mg/L) = 67.4 mg/L. Therefore, the concentration of NaCl in the resulting solution in mg/L NaCl is 67.4 mg/L.7.  Concentration = 67.4 mg/LTolerance = 4.28 mg/LTotal concentration = 67.4 + 4.28 mg/L = 71.68 mg/LWe round off this value to one decimal place; Total concentration = 71.7 mg/LTherefore, the concentration of NaCl in the resulting solution using propagation of error through the calculation is 67.4+0.4 mg/L.8. Two possible sources of random (indeterminate) error in the experiment are; Errors in temperature measurement. Errors in measurement of water volume. Two possible sources of systematic (determinate) error in the experiment are; Incorrect calibration of volumetric glasswareIncorrect mass of NaCl.

Learn more about NaCl

https://brainly.com/question/32275922?

#SPJ11

One can expect to find the greatest amount of hydrolyzed pth when, entering the nephrons.

To view more about hydrolyzed pth, refer to:

https://brainly.com/question/4765096

#SPJ4

Acetylene (C2H2) can be synthesized from ethene (C2H4) through a reaction called "partial oxidation". The reaction can be performed by passing ethene and air over a hot metal catalyst, typically made of copper or iron. The reaction is exothermic and generates heat, which helps to maintain the reaction temperature. The following is the equation for the conversion of ethene to acetylene:

C2H4 + O2 -> C2H2 + H2O

In this reaction, ethene reacts with oxygen from air to form acetylene and water. The reaction is usually performed in a controlled environment, such as a reactor, to ensure that the reaction conditions are suitable for optimal conversion of ethene to acetylene. The acetylene produced is then typically purified, compressed, and stored for later use as a fuel or chemical feedstock.

75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.

To determine the amount of a 0.20% (m/v) KCl IV solution that can be prepared from a 5.0% (m/v) stock solution, the following formula can be used:

C1V1 = C2V2

where C1 is the concentration of the stock solution, V1 is the volume of the stock solution used, C2 is the desired concentration of the final solution, and V2 is the volume of the final solution.

In this case, C1 = 5.0%, V1 = 3.0 L, C2 = 0.20%, and V2 is what we are trying to find.

First, convert the percentages to decimals:

C1 = 0.050

C2 = 0.0020

Now we can plug in the values and solve for V2:

(0.050)(3.0) = (0.0020)(V2)

0.15 = 0.0020V2

V2 = 75 L

Therefore, 75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.

Learn more about stock solution.

https://brainly.com/question/25256765

#SPJ4

75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.

To determine the amount of a 0.20% (m/v) KCl IV solution that can be prepared from a 5.0% (m/v) stock solution, the following formula can be used:

C1V1 = C2V2

where C1 is the concentration of the stock solution, V1 is the volume of the stock solution used, C2 is the desired concentration of the final solution, and V2 is the volume of the final solution.

In this case, C1 = 5.0%, V1 = 3.0 L, C2 = 0.20%, and V2 is what we are trying to find.

First, convert the percentages to decimals:

C1 = 0.050

C2 = 0.0020

Now we can plug in the values and solve for V2:

(0.050)(3.0) = (0.0020)(V2)

0.15 = 0.0020V2

V2 = 75 L

Therefore, 75 liters of a 0.20% (m/v) KCl IV solution can be prepared from 3.0 L of a 5.0% (m/v) stock solution.


Learn more about stock solution.

brainly.com/question/25256765

#SPJ11

Answer:

2.16622443577839

Explanation:

Answer:

It would be 2.16622443577839.

Explanation:

The heat of combustion of the acetylene is;  -1253.3 kJ/mol

The heat of combustion of acetylene (C2H2) is the amount of heat energy released when acetylene is burned in excess oxygen. The heat of combustion is a measure of the energy content of a substance and is usually expressed in units of energy per unit of substance, such as joules per mole (J/mol) or calories per gram (cal/g).

The heat of combustion is;

[2(-393.5) + (-241.6)] - [-226.7]

= -1253.3 kJ/mol

Learn more about acetylene:https://brainly.com/question/28916568

#SPJ1

The reaction temperature X in a certain chemical process follows a uniform distribution with parameters A = -6°C and B = 6°C.

In a uniform distribution, the probability density function (PDF) is constant within a given interval and zero outside that interval. Since the reaction temperature follows a uniform distribution with parameters A = -6°C and B = 6°C, the interval for the temperature values is [-6, 6].

The PDF of a uniform distribution is given by:

\(\[ f(x) = \frac{1}{B - A} \]\)

Substituting the values, we have:

\(\[ f(x) = \frac{1}{6 - (-6)} = \frac{1}{12} \]\)

This means that the PDF of the reaction temperature X in the chemical process is \(\frac{1}{12}\) within the interval [-6, 6], and it is zero outside this interval.

Learn more about uniform distributions

brainly.com/question/30639872

#SPJ11

Density is referred to as a characteristic property of matter because Option A. the density of a substance is the same regardless of the mass and the volume of the substance at a given temperature.

Density is the substance's mass consistent with the unit of quantity. The symbol most customarily used for density is ρ, despite the fact that the Latin letter D can also be used. Density is the size of ways tightly a cloth is packed together. it's far defined as the mass consistent with unit quantity.

ρ = m/V, wherein ρ is the density, m is the mass of the item and V is the quantity of the object.

The density of a liquid is a measure of how heavy it is for the quantity measured. in case you weigh the same amounts or volumes of two one-of-a-kind beverages, the liquid that weighs extra is greater dense.

The density is of two types, one is absolute density, and the alternative is relative density. Relative density is also called unique gravity, which is the ratio of the density of a material to the density of a reference material. typically, the reference fabric is water.

Learn more about density here:-https://brainly.com/question/6838128

#SPJ4

No, spoiling milk is not a chemical change. Spoiling milk is a physical change, which is a change in the state or appearance of a substance without changing its chemical composition.

When milk spoils, it is still composed of the same molecules, but its physical properties (such as taste, smell, and texture) have changed. Spoiling milk is caused by the growth of microorganisms, such as bacteria, which break down milk proteins and fats, causing changes in the milk's appearance, taste, and smell.  In the case of milk, spoiling is the result of the growth of bacteria, which is a physical change.  A physical change is a change in the physical state or appearance of a substance without any change in the chemical composition or identity of the substance.

To learn more about physical change click here https://brainly.com/question/17931044

#SPJ4