The momentum before the collision should be equal to the momentum after the collision.
Before the collision, Daisy has a mass of 50 kg and is moving at 4.0 m/s. Her friend, with a mass of 70 kg, is standing still, so their combined initial momentum is (50 kg)(4.0 m/s) + (70 kg)(0 m/s) = 200 kg·m/s.
After the collision, they are holding each other, so we can treat them as a single object with a combined mass of 120 kg (50 kg + 70 kg). Let v be the speed at which they both move off together after the collision.
Using the conservation of momentum principle, we can write the equation:
Initial momentum = Final momentum
200 kg·m/s = (120 kg)(v)
Now, we can solve for v:
v = (200 kg·m/s) / (120 kg) = 1.67 m/s
So, when Daisy and her friend collide and hold each other, they both move off together at a speed of approximately 1.67 m/s.
TO KNOW MORE ABOUT momentum CLICK THIS LINK
brainly.com/question/30677308
#SPJ11
What is number 10 for this?
Answer:
The wavelength of WFNX’s radio waves with the given speed and frequency is 2.95m.
Given data in the question;
Speed of wave;
Frequency of wave;
wavelength;
To determine the wavelength of the radio wave, we use the expression for the relations between wavelength, frequency and speed.
Where is wavelength, f is frequency and c is the speed.
We substitute our given values into the equation
Therefore, the wavelength of WFNX’s radio waves with the given speed and frequency is 2.95m.
Explanation:
Find the gravitational force that Earth (mass = 5.97 × 10²⁴ kg) exerts on the moon (mass = 7.35 × 10²² kg) when the distance between them is 3.84 × 10⁸ m. The value of G is 6.67 x 10⁻¹¹ Nm²/kg².
Explanation:
mass of earth (m1)=5.97×10^24
mass of moon (m2)=7.35×10^22
distance between their center (d)= 3.84×10^8
G=6.67×10^-11
now,
gravitational force =(F)= G(m1×m2)/d²
6.67×10^-11(5.97×10^24×7.35×10^22)/(3.84×10^8)19.84×10^19stay safe healthy and happy...If Charge A is positive, then Charge B must be:
A. not enough info
B. Negative
C. Positive
D. Neutral
Answer:
b
Explanation:
negativity sure ans bro
why are illegal drugs dangerous
Answer:
Illegal drugs are dangerous because once someone starts doing drugs they go insane for more and their demand for my drugs can be so dangerous that they would even sometimes harm the people close to them and, In some cases people start to hate them selves and some even killed themselves.
PLEASE HELPPPPPPPP
What is the average velocity of a train that goes 86 km in 1.3 hours?
Please do!!!
Will name the brainlest!
i think it goes fall the down winter and then the other seasons
Wave 1
a) How many waves are there in this wave train?
b) Wavelength cm c) Amplitude
cm
Answer:
see below
Explanation:
a wave means one complete wave which is 1 period
so a) 5 complete waves
wavelength is the shortest distance between any two points in phase
so wavelength = 1 CM
amplitude of a wave is the maximum displacement of a particle from its rest position
so amplitude = 3 CM
hope this helps
Signal propagation in the nervous system can be modeled as
a) A resistor network.
b) A wave of electricity that travels down conducting tissue.
c) A series of RC circuits.
Answer:
c) A series of RC circuits.
Question 23
Which one of the following is not a potential impact of global warming?
a. increased crop yield, particularly of citrus fruits
b. loss of biodiversity
c. the sea level is likely to rise
d. human morbidity and mortality rates are liable to rise
The Increased crop yield, particularly of citrus fruits, is not a potential impact of global warming. In fact, global warming could have a negative impact on agriculture, leading to reduced crop yields and food shortages.
The other options, loss of biodiversity, rising sea levels, and increased human morbidity and mortality rates, are all potential impacts of global warming. The increased crop yield, particularly of citrus fruits This option is not a potential impact of global warming because while warmer temperatures may initially benefit some crops, the overall effects of climate change, including extreme weather events, water scarcity, and increased pests and diseases, are expected to have a negative impact on crop yields in the long term.
learn more about global warming here.
https://brainly.com/question/9647525
#SPJ11
5). A body of mass 75kg lying on a surface of
μ = 0.4 move in the direction of a horizontal force
of 300N applied to it.
a). Calculate the
i). friction force
ii). acceleration of the body
b). Explain the result in aii).
Explanation:
a) i) Calculation of the friction force:
The friction force can be determined using the equation:
friction force = coefficient of friction * normal force
The normal force is equal to the weight of the object, which can be calculated as:
normal force = mass * gravitational acceleration
where the gravitational acceleration is approximately 9.8 m/s².
normal force = 75 kg * 9.8 m/s² = 735 N
friction force = 0.4 * 735 N = 294 N
ii) Calculation of the acceleration of the body:
Now, we can calculate the acceleration using Newton's second law:
net force = mass * acceleration
Since the applied force and the friction force act in opposite directions, the net force can be calculated as:
net force = applied force - friction force
net force = 300 N - 294 N = 6 N
mass = 75 kg
6 N = 75 kg * acceleration
acceleration = 6 N / 75 kg = 0.08 m/s²
b) Explanation:
In part (a), we calculated the friction force to be 294 N and the acceleration of the body to be 0.08 m/s². The positive acceleration indicates that the body is moving in the direction of the applied force.
The friction force opposes the motion of the body and acts in the opposite direction to the applied force. In this case, the applied force of 300 N is greater than the friction force of 294 N. As a result, the net force acting on the body is 6 N in the direction of the applied force.
The small net force of 6 N, compared to the body's mass of 75 kg, results in a relatively low acceleration of 0.08 m/s². This indicates that the body will accelerate slowly in the direction of the applied force due to the presence of friction.
Overall, the friction force and the resulting acceleration of the body are determined by the coefficient of friction (μ) and the mass of the object. In this case, the body experiences a relatively high friction force, leading to a small acceleration.
When a sound wave first enters the auricle, which part of the ear does it travel through on its way to the eardrum?
auditory nerve
cochlea
hammer
ear canal
Ear Canal.
Explanation:
Sound waves enter the auricle and travel through a narrow passageway called the ear canal, which leads to the eardrum.
Answer:
option A) or ear canal
Explanation:
Escriba una oracion empleada de dos adjetivos de significado opuesto unidos por la exprecion y a la ves
Answer:
El castigo de Juan fue justo y a la vez injusto.
Explanation:
Adjetivos opuestos: justo - injusto
La oración significa que el que castigo era merecido, sin embargo, puede ser algo exagerado por lo tanto algo injusto. Describiendo la situación con adjetivos con significado opuesto al mismo tiempo, mediante un conector de simultaneidad que es y a la vez.
Which has the greater volume?
A. wood
B. white block
C. equal
Answer:
B.white block
hope it's the answer ....❤❤❤❤❤❤
Help thank you...............
Answer:
do explain what u need help with?
Determine the Relative Humidity, Dew Point, and Lifting Condensation Level: 1. The temperature is 30∘F and it contains 3.5 g/kg of water vapor. 2. The temperature is 50∘F and it contains 5.70 g/kg of water vapor. 3. The temperature is 70∘F and it contains 3.5 g/kg of water vapor. 4. The temperature is 80∘F and it contains 5.60 g/kg of water vapor. 5. The temperature is 80∘F and it contains 11.56 g/kg of water vapor. 6. The temperature is 30∘F and the mixing ratio is 3.5. 7. The temperature is 70∘F and the mixing ratio is 8.32. 8. The temperature is 70∘F and the mixing ratio is 3.66. 9. The temperature is 80∘F and the mixing ratio is 17.59. 10. The temperature is 50∘F and the mixing ratio is 6.54.
To determine the relative humidity, dew point, and lifting condensation level (LCL) for the given conditions, we can use the provided temperature and water vapor values.
Here are the calculations for each scenario:
1. Temperature: 30°F, Water Vapor: 3.5 g/kg - Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure)
- Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure) - LCL: N/A (Need the temperature and dew point)
2. Temperature: 50°F, Water Vapor: 5.70 g/kg
- Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure) - Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure)
- LCL: N/A (Need the temperature and dew point)
3. Temperature: 70°F, Water Vapor: 3.5 g/kg - Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure)
- Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure) - LCL: N/A (Need the temperature and dew point)
4. Temperature: 80°F, Water Vapor: 5.60 g/kg
- Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure) - Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure)
- LCL: N/A (Need the temperature and dew point)
5. Temperature: 80°F, Water Vapor: 11.56 g/kg - Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure)
- Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure) - LCL: N/A (Need the temperature and dew point)
6. Temperature: 30°F, Mixing Ratio: 3.5
- Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure) - Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure)
- LCL: N/A (Need the temperature and dew point)
7. Temperature: 70°F, Mixing Ratio: 8.32 - Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure)
- Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure) - LCL: N/A (Need the temperature and dew point)
8. Temperature: 70°F, Mixing Ratio: 3.66
- Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure) - Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure)
- LCL: N/A (Need the temperature and dew point)
9. Temperature: 80°F, Mixing Ratio: 17.59 - Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure)
- Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure) - LCL: N/A (Need the temperature and dew point)
10. Temperature: 50°F, Mixing Ratio: 6.54
- Relative Humidity (RH): N/A (Need the actual vapor pressure or saturation vapor pressure) - Dew Point: N/A (Need the actual vapor pressure or saturation vapor pressure)
- LCL: N/A (Need the temperature and dew point)
To calculate the relative humidity, dew point, and LCL, we require
Learn more about relative humidity, here:
https://brainly.com/question/15392762
#SPJ11
Which are examples of a medium?
Answer:
One example of a medium is air.
Explanation:
Answer:
An example? I mean if we're going for an example, I'd say middle, Or balanced.
Which of these features is true of both solar and wind power? a. Intermittent power source that requires a backup energy source b. Produces no greenhouse gas emissions during normal operation c. Supplies a small fraction of global energy demand, but is increasing rapidly d. All of these are correc
The feature that is true of both solar and wind power is (b) Both power sources produce no greenhouse gas emissions during normal operation.
This makes them a more environmentally friendly alternative to traditional fossil fuels, which emit carbon dioxide (CO2) and other harmful gases during combustion.
However, the other options are not completely accurate. Solar and wind power can be intermittent, but this does not necessarily mean that they require a backup energy source. Energy storage technologies, such as batteries or pumped hydro storage, can be used to store excess energy generated during times of high production and release it during times of low production.
Furthermore, while solar and wind power currently supply a small fraction of global energy demand, it is important to note that their usage is increasing rapidly. In fact, renewable energy sources, including solar and wind power, are projected to be the fastest-growing energy source over the next few decades.
In conclusion, solar and wind power's most significant shared feature is their ability to operate without producing greenhouse gas emissions. While they do have other characteristics that are sometimes associated with them, these features are not always completely accurate and may not apply in every circumstance.
for more such questions on power
https://brainly.com/question/1634438
#SPJ8
What is the formula to calculate the speed of an object?
If a car, with an initial velocity of 15 m/s, accelerates at a rate of 5 m/s^2 for 4 seconds, what will its final velocity be?
Answer:
35 m/s
Explanation:
vf = vo + at
vf = 15 + 5(4) = 35 m/s
Complex reporting relationships, power struggles, and over-reliance on group processes are disadvantages of which type of organizational structure
The disadvantages described, including complex reporting relationships, power struggles, and over-reliance on group processes, are characteristic of a matrix organizational structure.
The disadvantages described, including complex reporting relationships, power struggles, and over-reliance on group processes, are characteristic of a matrix organizational structure.
A matrix structure is characterized by multiple lines of authority, where employees report to both a functional manager and a project or product manager. This dual reporting can lead to complex reporting relationships, as employees have to navigate multiple chains of command.
Power struggles may arise as different managers compete for control and resources. Additionally, the matrix structure relies heavily on group processes and collaboration, which can result in delays and inefficiencies if decision-making becomes too consensus-driven.
While the matrix structure has its advantages, such as flexibility and expertise sharing, these disadvantages can create challenges in communication, decision-making, and power dynamics within the organization.
Learn more about matrix organizational structure here:
https://brainly.com/question/30403441
#SPJ4
With modulus of elasticity, MoE - 7,920 N/mm2 at 12% mo, what would be the expected MoE at 23% mc? Assume FSP = 30 % Give your answer in N/mm² to the nearest whole number.
to find the modulus of elasticity MoE at 23% of moisture content based on the already given modulus of elasticity of 12% moisture content we need to consider a shrinkage behavior of material. the expected MoE comes out to be approximately \(6,836 N/mm².\)
given information:
Modulus of elasticity at 12% moisture content =7,920 N/mm²
resultant shrinkage or final shrinkage percentage FSP = 30%
To calculate the expected MoE at 23% moisture content we have the following equation:
MoE-23% = \(MoE-12%\) \((1 - FSP (23 - 12) / (100 - 12))\)
MoE-23% = \(7,920 N/mm² × (1 - 0.30 × (23 - 12) / (100 - 12))\)
MoE-23% =\(7,920 N/mm² × (1 - 0.30 × 11 / 88)\)
MoE-23% = \(7,920 N/mm² × (1 - 0.1364)\)
MoE-23% = \(7,920 N/mm² × 0.8636\)
MoE-23% = \(6,836 N/mm²\)
therefore the expected modulus of elasticity at 23% moisture content comes out to be approx \(6,836 N/mm²\).
to know more about modulus of elasticity refer to the link below
https://brainly.com/question/29767033
#SPJ4
The populations P (in thousands) of a particular county from 1971 through 2014 can be modeled byP = 71.7e0.0345twhere t represents the year, with t = 1 corresponding to 1971.(a) Use the model to complete the table. (Round your answers to the nearest whole number.)YearPopulation1980101240 Correct: Your answer is correct.1990142949 Correct: Your answer is correct.2000201843 Correct: Your answer is correct.2010285000 Correct: Your answer is correct.(b) According to the model, when will the population of the county reach 350,000?2018 Incorrect: Your answer is incorrect.
ANSWERS
(a) Year - Population
• 1980 - 101,240
,• 1990 - 142,949
,• 2000 - 201,843
,• 2010 - 285,000
(b) 2016
EXPLANATION
(a) The population (in thousands) each year is given by,
\(P=71.7\cdot e^{0.0345t}\)If t = 1 represents year 1971, then for each year we have to find the difference between the year and 1970.
For year 1980,
\(P=71.7\cdot e^{0.0345(1980-1970)}\approx101.240\)The population is 101,240.
For year 1990,
\(P=71.7\cdot e^{0.0345(1990-1970)}\approx142.949\)The population is 142,949.
For year 2000,
\(P=71.7\cdot e^{0.0345(2000-1970)}\approx201.843\)The population is 201,843.
For year 2010,
\(P=71.7\cdot e^{0.0345(2010-1970)}\approx285.000\)The population is 285,000.
(b) In this problem we're given the population 350,000 and we have to find in what year the county will reach that population. In other words, we have to find t and then add that to 1970 to find the year.
Let's solve for t,
\(P=71.7\cdot e^{0.0345t}\)Divide both sides by 71.7,
\(\begin{gathered} \frac{P}{71.7}=\frac{71.7}{71.7}\cdot e^{0.0345t} \\ \frac{P}{71.7}=e^{0.0345t} \end{gathered}\)Apply natural logarithm to both sides,
\(\begin{gathered} \ln \frac{P}{71.7}=\ln e^{0.0345t} \\ \ln \frac{P}{71.7}=0.0345t \end{gathered}\)Divide both sides by 0.0345,
\(\begin{gathered} \frac{\ln \frac{P}{71.7}}{0.0345}=\frac{0.0345t}{0.0345} \\ \frac{\ln\frac{P}{71.7}}{0.0345}=t \end{gathered}\)And finally replace P and solve. Remember that P is in thousands of years, so we have to replace it by 350,
\(t=\frac{\ln \frac{350}{71.7}}{0.0345}=45.955\approx46\)This is 46 years after 1970,
\(1970+46=2016\)Let's see what's the population in 2016 to check the answer,
\(P=71.7\cdot e^{0.0345(2016-1970)}\approx350.546\)It is a bit more than 350,000. But let's see what's the population in 2015,
\(P=71.7\cdot e^{0.0345(2015-1970)}\approx338.658\)In 2015 population of the county won't reach 350,000. Thus, the county will have a population of 350,000 in 2016
Which planets are generally referred to as the ice giants?.
Answer:
The correct answer is Uranus and Neptune
what is the net force of a 6 kg object that goes from a velocity of 0.5 m/s to a velocity of 3 m/s over the course of 1.5 seconds? PLEASE ANSWER ASAP I HAVE 10 MINUTES PLEASEEEEEE
Answer:
∑F = 10.2 N
Explanation:
We have:
Initial velocity: 0.5 m/s
Final velocity: 3 m/s
Time: 1.5 s
We have all of the components needed to calculate acceleration. Let's do that, shall we?
a = vf-vo/t
a = 2.5/1.5
a = 1.7 \(m\)/\(s^{2}\)
Now, look at the Net Force equation:
∑F = ma
Plug in the variables, to get:
∑F = (6)(1.7)
∑F = 10.2 N (You can round this according to significant digits)
fill in the blanks and the following paragraph should correctly describe the behavior of waves A wave is a(n)________ That carries ____ through space. Some waves travel through empty space. Other waves must travel through a material, also known as a _____. Waves transfer energy but not ______.
Answer:
1) current
2) energy
3) medium
4) matter
Explanation:
A wave is a medium that carries energy through space. Some waves travel through empty space. Other waves must travel through a material, also known as an energy. Waves transfer energy but not matter.
What is wave?A wave is a phenomenon that flows across a material medium without leaving any lasting mark. Mechanical or electromagnetic waves can be used to classify it. Transverse and longitudinal are the two main forms.
A disturbance that travels through a medium with a transfer of matter and without a transfer of energy best describes a wave.
The primary distinction between transverse and longitudinal waves is that in transverse waves, wave particles travel perpendicular to the wave's direction, but in longitudinal waves, wave particles move horizontally.
A wave is a medium that carries energy through space. Some waves travel through empty space. Other waves must travel through a material, also known as an energy. Waves transfer energy but not matter.
Hence, the correct answer for the blanks are medium,energy,and matter.
To learn more about the wave, refer to the link;
brainly.com/question/3004869
#SPJ2
If you precisely measure the position of a particle, you __________. If you precisely measure the position of a particle, you __________. destroy information about its momentum convert it into a wave cause it to interfere cause the particle to be annihilated
Answer:
Destroy information about the speed of the particle
Explanation:
This is according to Heisenberg's Uncertainty Principle states that there is inherent uncertainty in the act of measuring a variable of a particle. Commonly applied to the position and momentum of a particle, the principle states that the more precisely the position is known the more uncertain the momentum is and vice versa.
Magnetic field lines exit out of the . Magnetic field lines enter into the . Magnetic field lines travel around a bar magnet in
Answer:
Magnetic field lines exit out of the North pole . Magnetic field lines enter into the South pole. Magnetic field lines travel around a bar magnet in closed loops.
Explanation:
Magnetic field lines shows the direction of a magnetic force and how it acts, it gives the direction of the magnetic field at that point in time.
For a bar magnetic, the magnetic field lines runs from the north pole to the south pole, i.e. it exits the north pole and enters into the south pole. This magnetic field lines also go through the magnet forming closed loops without ends.
Answer:
Magnetic field lines exit out of the
✔ north pole
.
Magnetic field lines enter into the
✔ south pole
.
Magnetic field lines travel around a bar magnet in
✔ a closed loop
.
Explanation:
The information shows the masses after the compounds are balanced.
2MgO + 2Cl2 → 2MgCl2 + O2
85g + 156g → 188g + ?
If the following materials are used during the reaction of magnesium, oxygen, and chlorine, what mass oxygen would we expect to see after the reaction and why?
A. 53g of O2, because all mass must be conserved.
B. 241g of O2, because all mass must be conserved.
C. 42.5g of O2, because all mass must be conserved, it would be half of the compound MgO in the products.
D. 106g of O2, because all mass must be conserved, it would be double the compound MgO in the products.
Pls answer correctly I really need a good grade on this.
Answer:
The information shows the masses after the compounds are balanced.
2MgO + 2Cl2 → 2MgCl2 + O2
85g + 156g → 188g + 53g
53gas total mass in reactant is equal to product.
A.
53g of O2, because all mass must be conserved.
Choose a sport you like, such as football or gymnastics. Describe how a high level of flexibility would affect your performance in that sport. Consider the benefits in many aspects of the sport.
The level of flexibility will affect my performances in football. Football
requires some level of flexibility to do certain things.
Flexibility will enable me change speed and direction easily when there is a
counter attack by the opponents. It will also assist in using some techniques
such as adding more curve on the football with the feet in order to score
goals.
Flexibility will also ensure that there will be lesser injury concerns because there will be less sprains or other muscle related injuries.
Read more on https://brainly.com/question/18472626
find the relative density of copper block of mass 216 gram having volume of 80 cm cube ( cm3) . Density of water is 1g/ cm3.