Define the dead or void time in HPLC?
Plzzz help I’m struggling

Detergent enzymes are better because they help limit phosphate pollutants in the environment. Option 3.

Phosphates are a common ingredient in traditional laundry detergents, but they can have harmful effects on the environment.

When phosphate-containing detergents are used, the phosphates can end up in waterways and cause excessive algae growth, leading to decreased oxygen levels in the water and harm to aquatic life.

Enzyme-based detergents can be a more environmentally friendly option as they do not contain phosphates, reducing the amount of phosphate pollution released into the environment.

More on detergents can be found here: https://brainly.com/question/20986862

#SPJ1

In the formation of magnesium chloride by direct bonding, magnesium (Mg) and chlorine (Cl2) combine as follows: Mg(s) + Cl2(g) → MgCl2(s) (magnesium) (chlorine) (magnesium chloride).

Magnesium chloride. This compound is used in medicine as a source of magnesium ions, which are essential for many cellular activities.It is also used as a laxative and alloy.

Magnesium chloride is safe for men, women, children and even during pregnancy. Magnesium chloride can also help the body process and absorb calcium, another essential mineral.

Magnesium salt and Epsom salts are different. And, interestingly, neither are they called 'salts' . Magnesium chloride the a compound of magnesium and chloride. Whereas Epsom salts are the compound of magnesium and sulfate.

Learn more about magnesium chloride here:- https://brainly.com/question/26227142

#SPJ4

The fact that the infrared thermometers used in medical research were first intended to detect the temperature on Mars has had an impact on that field of study.

Technology for use in outer space, in aviation or other operations outside of Earth's atmosphere, for things like spaceflight, space exploration, and Earth observation, is referred to as space technology.

By enabling high-speed data transport with the development of the internet, enabling research of global natural phenomena, and enabling environmental monitoring, space technology started to be employed for telecommunications and the environment.

To know more about thermometers visit:-

https://brainly.com/question/13294753

#SPJ1

Answer:

Ion know

Explanation:

Answer:

A.    

They have no charge and are located inside the nucleus.

Explanation: It is true that neutrons have no charge, but they do have mass. The neutron does not exist outside the atomic nucleus.

The mass, in grams, of 5.2 x 10^28 atoms of manganese would be 0.0006833 grams

According to Avogadro, 1 mole of any substance contains 6.022 x \(10^{23}\) atoms.

Thus, how many moles would be in 5.2 x \(10^{28}\)atoms of Mn:

         = 6.022 x \(10^{23}\) /1 x 5.2 x \(10^{28}\)

                       = 0.00001158 moles

Mass of 0.00001158 moles Mn = 0.00001158 x 54.9

                         = 0.0006833 grams

More on Avogadro's constant can be found here: https://brainly.com/question/21177668

The mole fraction of the hexane in the solution is 0.59

Mole = mass / molar mass

Mole of hexane = 65.1 / 86.18

Mole of hexane = 0.755 mole

Mole = mass / molar mass

Mole of octane = 60 / 114.2

Mole of octane = 0.525 mole

Mole fraction = mole / total mole

Mole fraction of hexane = 0.755 / 1.28

Mole fraction of hexane = 0.59

Learn more about mole fraction:

https://brainly.com/question/2769009

0.59 moles of propylene (\(C_3H_6\)) are in 25.0g of the substance.

A mole is defined as 6.02214076 × \(10^{23}\) of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

Given data:

Mass of propylene = 25.0g

Molar mass of propylene=42.08 g/mol

\(Moles = \frac{mass}{molar \;mass}\)

\(Moles = \frac{25.0g}{42.08 g/mol}\)

Moles =0.59 moles

Hence, 0.59 moles of propylene (\(C_3H_6\)) are in 25.0g of the substance.

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

Answer:

b. 2-methylhexane

Explanation:

ap3x approved

The molecule shown below is - 2-methylhexane and the correct option is option B.

The IUPAC system of nomenclature is a set of logical rules framed which are mainly aimed at giving an unambiguous name to an organic compound.

IUPAC stands for International Union of Pure and Applied Chemistry

A prefix to the name comes before the molecule. The prefix of the molecule's name is based on the number of carbon atoms.

For example, a chain of six carbon atoms would be named using the prefix hex-.

The suffix to the name is an ending that is applied that describes the types of chemical bonds in the molecule.

The molecule has 6 carbon atoms and a methyl group at the second position.

Therefore, The molecule is 2-methylhexane and the correct option is option B.

Learn more about IUPAC Nomenclature, here:

https://brainly.com/question/30086566

#SPJ7

The new volume of the balloon after heating it to a temperature of 51 °C is approximately 2.39 L.

Charles's law states that "the volume occupied by a definite quantity of gas is directly proportional to its absolute temperature.

It is expressed as;

\(\frac{V_1}{T_1} =\frac{V_2}{T_2}\)

Given that:

Substituting the given values and solve for V₂:

\(V_1T_2 = V_2T_1\\\\V_2 = \frac{V_1T_2}{T_1} \\\\V_2 = \frac{2.2\ *\ 324.15}{298.15 }\\ \\V_2 = 2.39 \ L\)

Therefore, the final volume is 2.39 litres.

Learn more about Charles's law here: https://brainly.com/question/23122443

#SPJ1

Statement a is true, as the melting points of saturated fatty acids do increase with increasing chain length. Statement b is false, as saturated fatty acids do not contain double bonds. Statement c is false, as △9, 12-all cis, 18:3 represents alpha-linolenic acid, not linoleic acid. Statement d is true, as glycerol is indeed a by-product of the hydrolysis of fats.

a. True. The melting points of saturated fatty acids increase with increasing chain length. This is because longer fatty acid chains have stronger intermolecular forces, such as van der Waals forces, which require more energy to break and result in higher melting points.

b. False. Saturated fatty acids do not have double bonds. They are composed of only single carbon-carbon bonds. Double bonds are found in unsaturated fatty acids.

c. False. △9, 12-all cis, 18:3 is not linoleic acid. It represents the structure of alpha-linolenic acid. Linoleic acid is △9, 12-18:2, which means it has two double bonds located at the 9th and 12th carbon positions.

d. True. A by-product of the hydrolysis of fats is glycerol. When fats undergo hydrolysis, they are broken down into their constituent fatty acids and glycerol. Glycerol is a three-carbon molecule that is a component of triglycerides (fats).

During hydrolysis, the ester bonds between the fatty acids and glycerol are cleaved, resulting in the release of fatty acids and glycerol.

For more such question on double bonds visit:

https://brainly.com/question/27879143

#SPJ8

An example of a composition which fulfills the qualifications of being both a base and a weak electrolyte is ammonia (NH3).

A base is any constituent which voluntarily receives protons (H+) in an associated chemical reaction while an electrolyte denotes any material that can conduct electricity through liquids or in melted state.

Upon dissolution in water, it is apt to accept a proton from such and thus create the acidic ion known as ammonium (NH4+). Nonetheless, due to its scarce dissociation into hydroxide (OH-) and ammonium ions, it is deemed a weak electrolyte.

Learn more about electrolytes on

https://brainly.com/question/17089766

#SPJ1

Answer:

Option D

Explanation:

Because we know the relationship between no of moles and volume

Option D

There will be 0.4589 mL of ethyl acetate left in the space after evaporation.

The conversion of a liquid substance into a gas is known as evaporation. As a result of the liquid absorbing energy from its surroundings, molecules begin to travel faster and faster until they finally become a vapour and escape into the environment. Usually, the energy is absorbed as heat, but it can also be in the form of light or electricity.

No, the ethyl acetate won't all evaporate. The amount of ethyl acetate that will stay in the space after evaporation can be determined using the ideal gas law. As per the ideal gas law, PV = nRT

P is the overall system pressure, V is the room's volume, n is the amount of ethyl acetate in moles, R is the ideal gas constant, and T is the temperature.

To solve for n, the quantity of moles of ethyl acetate, we can rearrange the equation as follows: n = PV/RT

When the values are plugged in, we get:

n = (94.9 torr)(7.25 m x 2.75 m x 2.75 m)/(8.314 J/K mol)(298 K)

\(n = 4.666 \times 10^{-3} mol\)

The molar mass of ethyl acetate (88.11 g/mol) can then be used to compute the mass of ethyl acetate:

Mass = \(n \times M = (4.666 x 10^{-3} mol)(88.11 g/mol)\) = 0.4125 g

Using the density of ethyl acetate (0.901 g/mL), it is possible to determine the volume of the liquid that is still present:

Volume = mass/density = (0.4125 g)/(0.901 g/mL) = 0.4589 mL

As a result, there will be 0.4589 mL of ethyl acetate left in the space after evaporation.

To learn more about evaporation, visit:

brainly.com/question/24258

#SPJ1

Types of luminous flames:

1. Yellow Luminous Flame

2. Smoky Luminous Flame

3. Orange Luminous Flame

4. Blue Luminous Flame

Luminous flames are characterized by their visible glow, which is caused by the incomplete combustion of fuel. The presence of soot particles in the flame causes the emission of light. There are different types of luminous flames, which can be classified based on their fuel composition and burning conditions. Here are some common types of luminous flames:

1. Yellow Luminous Flame: This is the most common type of luminous flame, often seen in open fires, candles, and gas stoves. It appears yellow due to the presence of soot particles in the flame. Yellow flames indicate incomplete combustion of hydrocarbon fuels, such as methane, propane, or natural gas. The high carbon content in these fuels leads to the formation of soot, which emits visible light.

2. Smoky Luminous Flame: This type of flame is characterized by a significant amount of black smoke and soot production. It is commonly observed in poorly adjusted or malfunctioning burners or engines. The excessive presence of unburned fuel in the flame results in incomplete combustion and the emission of dark smoke particles.

3. Orange Luminous Flame: An orange flame indicates a higher combustion temperature compared to a yellow flame. It is often seen in more efficient burners or when burning fuels with a higher carbon content, such as oil or diesel. The higher temperature helps in burning more of the carbon particles, reducing the amount of soot and making the flame appear less yellow.

4. Blue Luminous Flame: A blue flame is typically associated with complete combustion. It indicates efficient burning of fuel, resulting in minimal soot formation. Blue flames are commonly observed in gas burners or Bunsen burners. The blue color is a result of the combustion of gases, such as methane, in the presence of sufficient oxygen.

It's important to note that the luminosity of a flame can vary depending on factors such as fuel-air mixture, combustion temperature, and the presence of impurities. Achieving complete combustion and minimizing the production of soot is desirable for efficient and cleaner burning processes.

for more questions on luminous

https://brainly.com/question/27163038

#SPJ8

Answer:

D. decreasing activation energy.

Explanation:

Let's see an example of a potential energy diagram:

You can see that if we use a catalyst in the reaction, the activation energy decreases which accelerates the rate of the reaction, so the answer would be D. decreasing activation energy.

Answer:

I took some cte classes and the did band camp because i wanted to join colorgaurd so now im in it and also went shopping for clothes.

Answer: Neils Bohr

Explanation: Development of the Atomic Theory. In 1913, Neils Bohr, a student of Rutherford 's, developed a new model of the atom. He proposed that electrons are arranged in concentric circular orbits around the nucleus. This model is patterned on the solar system and is known as the planetary model.

Answer:

273.2

Explanation:

Answer:

53.5%

Explanation:

Step 1: Given data

Step 2: Calculate the mass corresponding to 0.00875 moles of KClO₃

The molar mass of KClO₃ is 122.55 g/mol.

0.00875 mol × 122.55 g/mol. = 1.07 g

Step 3: Calculate the percent by mass of KClO₃ in the mixture

We will use the following expression.

%m/m = mass of KClO₃/mass of the sample × 100%

%m/m = 1.07 g/2.00 g × 100%

%m/m = 53.5%

The percent by mass of KClO3 in the original mixture is 53.5%.

Since

The mass of the sample should be 2.00 g

Moles of KClO₃: 0.00875 mol

The molar mass of KClO₃ is 122.55 g/mol.

Now the mass is

= 0.00875 mol × 122.55 g/mol.

= 1.07 g

Now the percentage should be

= mass of KClO₃/mass of the sample × 100%

= 1.07 g/2.00 g × 100%

= 53.5%

hence, The percent by mass of KClO3 in the original mixture is 53.5%.

Learn more about mass here: https://brainly.com/question/21988892

Answer:

Erbium

Explanation:

With 68 protons we can infer that the atomic number of this element is 68, using a periodic table the element with 68 as its atomic number is Erbium.

Answer:
Erbium

Explanation:

The only element that I see that has 68 protons is Erbium. Erbium is a chemical element with the symbol Er and atomic number 68. Erbium is a silvery-white solid metal when artificially isolated, natural erbium is always found in chemical combination with other elements.

Hope this helps!

In the simile "Ben swallowed the sandwiches like a snake," the two things being compared are Ben (the subject of the sentence) and a snake.

The important qualities of a snake in this metaphor are its swallowing behavior and the speed at which it devours its prey.

A metaphor is a figure of speech that makes a comparison between two unrelated things, objects, or concepts, highlighting a similarity between them. Unlike similes, which use words such as "like" or "as" to make a direct comparison, metaphors state that one thing is another.

Snakes are known for their ability to consume their prey whole and quickly, using their flexible jaws and swallowing mechanism.

Therefore, the important quality of the snake in the metaphor is swallowing.

Learn more about metaphors at: https://brainly.com/question/30391953

#SPJ1

Complete question:

Answer the questions about this simile: "Ben swallowed the sandwiches like a snake."

What two things are being compared?

What are the important qualities of a snake in this metaphor?

To determine the quantity of silver chloride formed, we need to balance the chemical equation for the reaction between calcium chloride and silver nitrate:

`CaCl2 + 2AgNO3 → 2AgCl + Ca(NO3)2`

From the balanced equation above, we can see that 2 moles of silver chloride are produced for every 1 mole of calcium chloride. The molar mass of calcium chloride is 110.98 g/mol while that of silver chloride is 143.32 g/mol.

To calculate the quantity of silver chloride formed, we can use the following steps:

1. Calculate the number of moles of calcium chloride:

   ```

   moles of CaCl2 = mass of CaCl2 / molar mass of CaCl2

   ```

   ```

   moles of CaCl2 = 35.5 g / 110.98 g/mol = 0.319 moles

   ```

2. Calculate the number of moles of silver chloride using stoichiometry:

   ```

   moles of AgCl = (moles of CaCl2) x (2 moles of AgCl / 1 mole of CaCl2)

   ```

   ```

   moles of AgCl = 0.319 x 2 = 0.638 moles

   ```

3. Calculate the mass of silver chloride formed:

   ```

   mass of AgCl = moles of AgCl x molar mass of AgCl

   ```

   ```

   mass of AgCl = 0.638 moles x 143.32 g/mol = 91.6 g

   ```

Therefore, 91.6 grams of silver chloride will form when 35.5 grams of calcium chloride reacts.

Answer: 91.6

Explanation:

To determine the quantity of silver chloride formed, we need to balance the chemical equation for the reaction between calcium chloride and silver nitrate:`CaCl2 + 2AgNO3 → 2AgCl + Ca(NO3)2`From the balanced equation above, we can see that 2 moles of silver chloride are produced for every 1 mole of calcium chloride. The molar mass of calcium chloride is 110.98 g/mol while that of silver chloride is 143.32 g/mol.To calculate the quantity of silver chloride formed, we can use the following steps:1. Calculate the number of moles of calcium chloride:      ```   moles of CaCl2 = mass of CaCl2 / molar mass of CaCl2      ```      ```   moles of CaCl2 = 35.5 g / 110.98 g/mol = 0.319 moles      ```   2. Calculate the number of moles of silver chloride using stoichiometry:      ```   moles of AgCl = (moles of CaCl2) x (2 moles of AgCl / 1 mole of CaCl2)      ```      ```   moles of AgCl = 0.319 x 2 = 0.638 moles      ```   3. Calculate the mass of silver chloride formed:      ```   mass of AgCl = moles of AgCl x molar mass of AgCl      ```      ```   mass of AgCl = 0.638 moles x 143.32 g/mol = 91.6 g      ```   Therefore, 91.6 grams of silver chloride will form when 35.5 grams of calcium chloride reacts.

Answer: The balanced chemical equation for the reaction between potassium iodide (KI) and calcium chloride (CaCl₂) in aqueous solution can be written as:

2KI(aq) + CaCl₂(aq) → CaI₂(aq) + 2KCl(aq)

In this reaction, two molecules of potassium iodide react with one molecule of calcium chloride to produce one molecule of calcium iodide and two molecules of potassium chloride. The equation is balanced because the number of atoms of each element is equal on both sides of the equation.

Explanation: Please mark as brainliest for me love! <3

Answer:

Three primary reasons. First, there is simply more water-covered places than dry ground places for the animals and plants to have lived. Second, the seas are much more crowded with the kinds of life that leave fossils than the land is. Third, the process that form fossils work very well under water.

Explanation:

On a graphic axis, we should alter the units' size, interval, starting and ending points, among other things. amphoteric Alter the Vertical Axis Units in the Sections.

The units into that an axis is subdivided define its scale. Grid lines, labels, and ticks are used to identify the units. The ticking, labels, plus grid lines alter depending on the scale of the axis. Each category itself is unit on a category axis, which has a relatively straightforward scale.

Change any or all of the following settings underneath Value axis scale by clicking Scale with in Format Axis dialogue box: Enter a different amount in the minimum and maximum boxes, respectively, to modify the value where the vertical (valued) axis begins or stops.

To know more about amphoteric visit:

https://brainly.com/question/29098795

#SPJ1

When the reaction of  Grignard reagent reacted with methanol will yield a tertiary alcohol. Therefore, Option C tertiary alcohol is correct.

Contains a carbon-metal link, Grignard reagents are chemicals used in catalysis. They generally result from the anhydrous reaction of magnesium metal with an alkyl or aryl halide. Because of their high reactivity, Grignard reagents frequently act as nucleophiles in organic reactions.

An alkyl group from a Grignard reagent binds to the oxygen atom of methanol (CH3OH) when it interacts with the methanol, breaking the carbon-metal connection. A precursor alkoxide is created as a result. The equivalent alcohol is then produced by protonating the intermediate alkoxide.

The reaction of a Grignard reagent with methanol leads to the formation of a tertiary alcohol.

Learn more about reagents here:

https://brainly.com/question/29729676

The perchloric acid solutions has a concentration of 4.66 mol/L. How so much solute has been absorbed in the solvent is indicated by the solution's level of concentration.

The percentage of a material, like salt, that is present in a specific volume of a liquid or tissue, like blood. Less water is present, and the material becomes more concentrated. Whenever a person doesn't consume sufficient amounts of water, for instance, the salt concentration in their urine may increase.

Ba(OH)2 moles equal volume times concentration, or 23.4 mL times 0.100 mol/L, or 0.00234 mol.

We can deduce from the equation that m2 m of HClO4 react including one mole pf Ba(OH)2. Hence, the amount of moles of Concentrated h2so4 in the 4.66 mL aliquot could be calculated as

0.00234 mol Ba(OH)2 divided by 1 equals moles of HClO4. (1 mol Ba(OH)2 / 2 mol HClO4) 0.0217 mol is equal to (1 L / 1000 mL) (4.66 mL / 1)

The concentration of a perchloric acid can finally be determined as follows:

HClO4 concentration is calculated as follows: moles per liter = 0.0217 mol / 4.66 mL = 4.66 mol/L

To know more about Concentration visit:

https://brainly.com/question/10725862

#SPJ1

In the electrical arrangement, the 6p subshell of the radon element contains 6 electrons.

For more information on electronic configuration kindly visit to

https://brainly.com/question/29757010

#SPJ1

To answer this, we wil need to use the molar mass of Water, M.

Let m be the mass of water and n be the number of moles of water, then:

To calculate the molar mass of water, we need the molar mass of H and O, which we can get on a periodic table:

So:

So, there are approximately 0.7666 mol of water.