Derive the 1" order ordinary differential equation (ODE) for this circuit using KVL/KCL (as needed). Report the ODE in standard form and in terms of output voltage. V. (note that this is equivalent to the voltage across the resistor, V.CO).
Answers
The 1st order ordinary differential equation (ODE) for this circuit can be derived using Kirchhoff's Voltage Law (KVL) and Ohm's Law as (dV.C0/dt) + (1/RC)*V.C0 = (1/RC)*V.i.
The total of the voltages surrounding any closed loop in a circuit is zero, thus the voltage across the capacitor and resistor must add up to the input voltage. We can describe the voltage across the resistor in terms of the current through it using Ohm's Law, and we can express the current in terms of the voltage across the capacitor using the capacitor equation. The equation may then be differentiated to yield the first-order ODE in terms of the output voltage V.C0.
The equation for the voltage across the resistor can be written as V.R = IR = V.i - V.C0, where V.i is the input voltage. Using the capacitor equation, we can express the current as I = C*(dV.C0/dt). Substituting this expression for I in the previous equation, we get V.R = V.i - V.C0 - RC*(dV.C0/dt). Differentiating this equation with respect to time, we obtain the first-order ODE in standard form as:
(dV.C0/dt) + (1/RC)*V.C0 = (1/RC)*V.i
This is a linear, first-order ODE with constant coefficients, and it can be solved using various methods such as the separation of variables, integrating factors, or Laplace transforms.
Learn more about differential equations:
https://brainly.com/question/25731911
#SPJ11
Related Questions
© 2022. Grand Canyon University. All Rights Reserved.APA Activity 2: Citing PracticeCreate a reference page by citing the following sources in correct APA format. You may use your text or the GCU Library website to help you, but do not use citation generators.•A textbook: The second edition of Psychology and Your Life by Robert S. Feldman written in 2013. The publishing city is New York, New York published from McGraw Hill Companies.•Snickers commercial https://youtu.be/2rF_FRCd_LA •PBS Frontline special League of Denial •The document found at this address:http://www.eia.gov/forecasts/aeo/er/pdf/0383er(2013).pdf•The movie Silver Linings Playbook•The episode of Friends titled: The One After Joey and Rachel Kiss•The 7th edition of the APA Manual
Answers
Using APA reference style, the references is attached below from Feldman, R. S. (2013) to American Psychology Association (2020)
What is APA Reference StyleAPA reference style is a style of citing sources used by the American Psychological Association. It is primarily used in the social sciences and includes guidelines for citing sources both within the text of a document and in the reference list at the end of the document. The guidelines provide a consistent way of citing sources to make it easier for readers to identify and locate the sources cited in a document.
In the given problem, if we need to write the reference using APA style, it will take this format below
Reference Page:
Feldman, R. S. (2013). Psychology and your life (2nd ed.). New York, NY: McGraw Hill Companies.
Frontline. (n.d.). League of denial. Retrieved from https://www.pbs.org/wgbh/frontline/film/league-of-denial/
Friends. (2004). The one after Joey and Rachel kiss [Television series episode]. In D. Crane, & M. Kauffman (Executive producers), Friends. Burbank, CA: Warner Bros. Television.
Silver Linings Playbook. (2012). [Motion Picture]. United States: The Weinstein Company.
U.S. Energy Information Administration. (2013). Annual energy outlook 2013 with projections to 2040. Retrieved from http://www.eia.gov/forecasts/aeo/er/pdf/0383er(2013).pdf
Snickers. (2013, April 2). You’re not you when you’re hungry [Video file]. Retrieved from https://youtu.be/2rF_FRCd_LA
American Psychological Association. (2020). Publication manual of the American Psychological Association (7th ed.). doi:10.1037/0000165-000
Learn more on APA reference style here;
https://brainly.com/question/28008158
#SPJ1
PLEASE HELP give an example of how scientists, technologists, engineers, and mathematicians may work together when inventing or innovating a new product. Include the role of each profession.
Answers
An example of them working together would be something like building a robot. Technologists would work on this project bc they would code the robot. Engineers would work on this bc they would design the interior. A mathematician would work in this bc a mathematician would calculate the angels of when a robot picks something up or when it turns. A scientist would work on this bc the scientist know about physics. You need physics so u know how much force to apply, how much energy to use, how much mass u need, and how much charge u need.
Explanation:
How many grains are on the surface of the head of a pin? assume that the head of a pin is spherical with a 1-mm diameter and has an astm grain size of 10
Answers
Answer:
Given, diameter of pin head d = 1 mm = 1/25.4 = 0.0394 in Surface area of a pinhead, A = 4pr^2 =
Explanation:
eesh
An action statement, a condition statement, and a criterion statement are components that should be included when construction?
Answers
Behavioral objectives. A behavioral objective is a learning outcome that is quantified and gives the learner's experience direction. It also serves as the foundation for student evaluation.
There are many ways that objectives can differ. They could be cognitive, emotional, psychomotor, generic or specialized, concrete or abstract. A behavioral objective is focused on the trainee's abilities rather than the trainer's actions.
As a result, a behavioral objective needs both an action verb and a subject for the sentence. If an aim lacks a subject, it is unclear who is anticipated to perform the action. teacher or student.
Well-written behavioral objectives help teachers gauge students' progress in reaching learning outcomes by providing learners with very clear statements about what action is expected of them.
To know more about behavioral objectives:
brainly.com/question/17355306
#SPJ4
A cylindrical specimen of some metal alloy 10 mm in diameter and 150 mm long has a modulus of elasticity of 100 GPa. Does it seem reasonable to expect a tensile stress of 200 MPa to produce a reduction in specimen diameter of 0.08 mm
Answers
Answer:
N0
Explanation:
It does not seem reasonable to expect a tensile stress of 200 MPa to produce a reduction in specimen diameter of 0.08 mm
Given data :
Diameter ( d ) = 10 mm
length ( l ) = 150 mm
elasticity ( ∈ ) = 100 GPa
longitudinal strain ( б ) 200 MPa
Poisson ratio ( μ ) ( assumed ) =0.3
Assumption : deformation totally elastic
attached below is the detailed solution to why it is not reasonable .
The Sd value = 0.08 > the calculated Sd value ( 6*10^-3 ) hence it is not reasonable to expect a tensile stress of 200 MPa to produce a reduction in specimen
The number of weaving errors in a twenty-foot by ten-foot roll of carpet has a mean of 0.8 What is the probability of observing more than 4 errors in the carpet
Answers
Answer:
0.14% probability of observing more than 4 errors in the carpet
Explanation:
When we only have the mean, we use the Poisson distribution.
In a Poisson distribution, the probability that X represents the number of successes of a random variable is given by the following formula:
\(P(X = x) = \frac{e^{-\mu}*\mu^{x}}{(x)!}\)
In which
x is the number of sucesses
e = 2.71828 is the Euler number
\(\mu\) is the mean in the given interval.
The number of weaving errors in a twenty-foot by ten-foot roll of carpet has a mean of 0.8.
This means that \(\mu = 0.8\)
What is the probability of observing more than 4 errors in the carpet
Either we observe 4 or less errors, or we observe more than 4. The sum of the probabilities of these outcomes is 1. So
\(P(X \leq 4) + P(X > 4) = 1\)
We want P(X > 4). Then
\(P(X > 4) = 1 - P(X \leq 4)\)
In which
\(P(X \leq 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4)\)
\(P(X = x) = \frac{e^{-\mu}*\mu^{x}}{(x)!}\)
\(P(X = 0) = \frac{e^{-0.8}*(0.8)^{0}}{(0)!} = 0.4493\)
\(P(X = 1) = \frac{e^{-0.8}*(0.8)^{1}}{(1)!} = 0.3595\)
\(P(X = 2) = \frac{e^{-0.8}*(0.8)^{2}}{(2)!} = 0.1438\)
\(P(X = 3) = \frac{e^{-0.8}*(0.8)^{3}}{(3)!} = 0.0383\)
\(P(X = 4) = \frac{e^{-0.8}*(0.8)^{4}}{(4)!} = 0.0077\)
\(P(X \leq 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4) = 0.4493 + 0.3595 + 0.1438 + 0.0383 + 0.0077 = 0.9986\)
\(P(X > 4) = 1 - P(X \leq 4) = 1 - 0.9986 = 0.0014\)
0.14% probability of observing more than 4 errors in the carpet
Answer:
0.14% probability of observing more than 4 errors in the carpet
Explanation:
what is most delicious fod in the philippines?
Answers
Answer:
Well there are a lot of delicious food in the philppines but my most favorite is the Lechon, Adobo, Sisig, Chicken Curry, Crispy pata and Sinigang
(14%) problem 2: in the three-resistor circuit diagram shown at right, r1 = 7.5 ω, r2 = 12 ω, r3 = 10.5 ω, and v = 14.5 v.
Answers
The current through each resistor is: - I1 = 1.933 A - I2 = -1.45 A - I3 = 1.45 A.
We know the total current, we can use Kirchhoff's Laws to find the current through each resistor. Kirchhoff's Current Law (KCL) states that the sum of currents entering a node equals the sum of currents leaving a node. Therefore, the current through each resistor must add up to the total current in the circuit (0.483 A).
To solve for the current through each resistor in the circuit, we need to use Ohm's Law and Kirchhoff's Laws. we can find the total resistance of the circuit by adding the individual resistances: Rtotal = r1 + r2 + r3 Rtotal = 7.5 Ω + 12 Ω + 10.5 Ω Rtotal = 30 Ω.
To know more about current visit:
https://brainly.com/question/31834315
#SPJ11
Wich muscle in your body are affected by alcohol first
Answers
Answer:
Brain
Explanation:
Thirty seconds after your first sip, alcohol races into your brain. It slows down the chemicals and pathways that your brain cells use to send messages. That alters your mood, slows your reflexes, and throws off your balance.A clothes dryer in a home has a power of 5300 watts and runs on a special 220-volt household circuit. What the ampage of the dryer?
Answers
Where a clothes dryer in a home has a power of 5300 watts and runs on a special 220-volt household circuit. The amperage of the dryer is 24.09 amps.
How did we arrive at that ?The amperage of the dryer can be calculated using the formula ..
Amperage = Power / Voltage
where Power is measured in watts and
Voltage is measured in volts.
Sicne the power of the dryer is 5300 watts and the voltage is 220 volts, so the amperage can be calculated as:
Amperage = 5300 watts / 220 volts
= 24.09 amps
Thus, it is correct to state that by the foregoing calculations, the amperage of the dryer is approximately 24.09 amps.
Learn more about amperage:
https://brainly.com/question/3963940
#SPJ1
which model predicts that the duration of a contest is a function of the value of the resource?
Answers
The model that predicts the duration of a contest as a function of the value of the resource is called the "Tullock's rent-seeking model".
This model was introduced by Gordon Tullock in 1967 and is widely used in political science and economics to understand how individuals and organizations compete for resources. In this model, individuals invest time and resources in order to win a contest, with the winner taking the entire prize. The duration of the contest is determined by the number of participants and the value of the prize, with larger prizes leading to longer contests. The model has been used to analyze a wide range of phenomena, from political lobbying to sports competitions.
To know more about Tullock's rent-seeking model, visit:
brainly.com/question/23844578
#SPJ11
What cell type has no membrane-bound organelles, has DNA that is found in an area called the
nucleoid, and is very small?
A. Eukaryotic cell
B. Prokaryotic cell
C. Animal cell
D. Plant cell
Answers
Answer:
Prokaryotic cell
Explanation:
A lake is fed by a polluted stream and a sewage outfall. The stream and sewage wastes have a decay rate coefficient (k) of 0.5/day (1st order units). Assuming complete mixing and no other water losses or gains, what is the steady-state pollutant concentration as mg/L in the lake? Incoming Stream: C = 10 mg/L, Q = 40 m^3/s Sewage Outfall: C = 100 ppm, Q = 0.5 m^3/s Lake: V= 200 m^3
Answers
Solution :
Given :
k = 0.5 per day
\($C_s = 10 \ mg/L \ ; \ \ Q_s= 40 \ m^3/s$\)
\($C_{sw} = 100 \ ppm \ ; \ \ Q_{sw}= 0.5 \ m^3/s$\)
Volume, V \($= 200 \ m^3$\)
Now, input rate = output rate + KCV ------------- (1)
Input rate \($= Q_s C_s + Q_{sw}C_{sw}$\)
\($=(40 \times 10) + (0.5\times 100)$\)
\($= 2 \times 10^5 \ mg/s$\)
The output rate \($= Q_m C_{m}$\)
= ( 40 + 0.5 ) x C x 1000
\($=40.5 \times 10^3 \ C \ mg/s$\)
Decay rate = KCV
∴\($KCV =\frac{0.5/d \times C \ \times 200 \times 1000}{24 \times 3600}$\)
= 1.16 C mg/s
Substituting all values in (1)
\($2 \times 10^5 = 40.5 \times 10^3 \ C+ 1.16 C$\)
C = 4.93 mg/L
Which reference source may be consulted to answer questions regarding the Professional Engineers Act?
(a) The Business and Professions Code
(b) The California Code of Regulations
(c) The Professional Engineers Act and Board Rules
(d) All of the above
Answers
The reference source that can be consulted is C. The Professional Engineers Act and Board Rules
The reference source that may be consulted to answer questions regarding the Professional Engineers Act is the Professional Engineers Act and Board Rules.
The Professional Engineers Act and Board Rules is an Act that was established in order to regulate the qualifications for professional engineers, register them and also make sure that their conducts and behavior are looked into.
Learn more about engineers on:
https://brainly.com/question/4231170
19. Write down the reason for the preparation of 350 mL mud in pilot test applications in the laboratory 20. What features of the mud are controlled by the chemicals added to the drilling mud? Make a list of them without explanation. 21. What chemical would you use to remove the calcium from the mud that was contaminated by cement or lime?
Answers
The preparation of 350 mL mud in pilot test applications in the laboratory is necessary to test the properties of the mud before it is used in larger quantities.
The pilot test provides an opportunity to evaluate the mud's performance under controlled conditions and make necessary adjustments to the mud composition before drilling operations commence. The pilot test is also useful for identifying any potential problems and ensuring that the mud is suitable for the drilling application.
20. The chemicals added to the drilling mud play a crucial role in controlling various features of the mud, including its density, viscosity, pH level, and fluid loss. They also help to prevent the formation of solids in the mud and control the growth of microorganisms. Some of the other features controlled by the chemicals include:
- Emulsion stability
- Lubricity
- Corrosion inhibition
- Filtration control
- Shale stabilization
- Thermal stability
- Defoaming
21. To remove calcium from the mud that has been contaminated by cement or lime, one could use a chelating agent such as ethylenediaminetetraacetic acid (EDTA). This chemical forms a complex with calcium ions, which are then removed from the mud by filtration or settling. Other chemicals that may be effective in removing calcium include ammonium citrate, hydrochloric acid, and sodium carbonate. The choice of chemical will depend on the specific situation and the nature of the mud contamination.
Learn more about acid :
https://brainly.com/question/29796621
#SPJ11
Describe a project in which you would use a pleater, ruffling foot, or gathering foot. Explain each of these tools and choose the one that might be necessary for the project you are describing.(FASHION DESIGN)
Answers
A project that requires using a pleater, a ruffling foot, or a gathering foot is the creation of a dress.
A pleater, a ruffling foot, and a gathering foot are all accessories for sewing machines or machines themselves that help fashion designers to give the fabric a different shape or texture, and therefore create unique pieces.
Pleater: This tool includes multiple needles that go through the fabric to create multiple pleatsRuffling foot: This is usually an accessory for sewing machines to create rufflesGathering foot: This tool is used to create gathers in fabric, these differ from ruffles because they are smaller and more subtle than rufflesAll of the tools can be used in the creation of a dress, for example, a pleater can be used in the top section of the dress to give it a nice texture and make it different from the skirt. In the same way, others such as the ruffling foot or the gathering foot can be used in the sleeves of the dress.
Learn more in: https://brainly.com/question/24702927
explain the reasons for any differences between calculated, simulated, and measured values in the output voltages of the summing and difference amplifiers.
Answers
Summing amplifiers, often referred to as voltage adders or voltage multipliers, are used in op-amp summing circuits to multiply input voltages.
When two input signals are applied to the inputs of the inverting and non-inverting terminals of an operational amplifier, the differential amplifier, a voltage subtractor circuit, generates an output voltage proportionate to the voltage difference between those two input signals.
So far, we have connected to the operational amplifier using only one of its inputs, either the "inverting" or the "non-inverting" terminal, and amplified a single input signal while connecting the other input to ground.
However, because a typical operational amplifier has two inputs—inverting and non-inverting—we can also connect signals to both of these inputs at the same time to create a Differential Amplifier, a common type of operational amplifier circuit.
To know more about amplifiers click here:
https://brainly.com/question/16795254
#SPJ4
The design product will be a description of the most efficient thermodynamic cycle required to supply 750 MW of electric power. Maximum efficiency is achieved by determining the best pressure at which to operate flash evaporator (2, 3, 7, 8) within the limits imposed by the specified parameters.
You should provide:
1. temperature, pressure, and entropy at the state points;
2. overall flow rate of water through the nuclear reactor;
3. heat transfer in the nuclear reactor;
4. % of the overall flow rate passing through the steam turbine;
5. power required for condensate pump 1;
6. power required for condensate pump 2;
7. cooling water flow rate.
Situation: Attached
Diagram: Attached
Water is used as the working fluid of a pressurized-water nuclear power plant (shown in the figure) designed to produce 750 MW of electric power. Saturated liquid exiting the reactor enters a flash evaporator at a selected pressure. The pressure reduction is achieved by a constant enthalpy throttle valve. Thus, a fraction of the water flashes into saturated steam (state 2) and the remainder flows as liquid into the mixing chamber (state 3, p3=p2). The steam enters the turbine,
PLEASE FIND THE SOLUTION WITH CALCULATIONS for 7 parts in total.
Answers
Answer:
I'm 50s I be sliding on them crabs and we be posting 5 inta a Snapple
given the standard cell potential for this cell is 0.115 v, and the measured cell potential is 0.0925, what is the concentration of chloride ions in the solution?
Answers
The concentration of chloride ions in the solution can be calculated by using the Nernst equation.
The Nernst equation is used to calculate the potential of an electrochemical cell under non-standard conditions. It relates the electrode potential to the concentrations of the species present in the solution.
The Nernst equation is:E = E° - (RT/nF) ln(Q)where, E is the cell potential under non-standard conditions,E° is the standard electrode potential, R is the gas constant, T is the temperature, n is the number of moles of electrons transferred, F is the Faraday constant, and Q is the reaction quotient.In this case, the standard cell potential (E°) is 0.115 V, and the measured cell potential (E) is 0.0925 V.
The reaction is given as:2AgCl(s) + 2e- → 2Ag(s) + 2Cl-(aq)We can see that n = 2 (two electrons are transferred in the reaction).The Nernst equation can be rearranged to solve for the concentration of chloride ions (Cl-) in the solution:ln(Cl-) = (E° - E)/(0.0592/n)ln(Cl-) = (0.115 - 0.0925)/(0.0592/2)ln(Cl-) = 0.378M[Cl-] = e^0.378M[Cl-] = 1.46 MTherefore, the concentration of chloride ions in the solution is 1.46 M.
To know more about concentration visit:
https://brainly.com/question/13872928
#SPJ11
what are the five groups of clutches which are classified according to how they achieve torque transfer
Answers
Friction clutches, tooth clutches, magnetic clutches, hydraulic clutches, and centrifugal clutches are the five types of clutches.
Why are clutches important?The clutch is the mechanism within a vehicle which connects rotating shafts and transfers power from the engine to the wheels. Power does not transfer effectively without a properly functioning clutch, and the automobile will not shift.
Note that the above clutches and their classifications are based on the mechanisms used to transfer torque, which include frictional force, tooth engagement, magnetic force, hydraulic pressure, and centrifugal force.
Learn more abut clutches :
https://brainly.com/question/27818428
#SPJ4
Determine the magnitudes of the pin reactions at A, B, and C caused by the weight of the uniform 6000-lb beam.
Answers
To determine the magnitudes of the pin reactions at A, B, and C caused by the weight of the uniform 6000-lb beam, we need additional information such as the specific configuration of the beam and the support conditions.
Typically, when dealing with a beam supported by multiple pins or supports, we analyze the equilibrium of forces and moments to calculate the reactions. The reactions depend on factors like the length of the beam, the distribution of the weight, and the type of supports.
Without knowing the specific details, it is not possible to provide an accurate answer. However, I can provide a general approach to solving such problems:
Determine the support conditions: Identify whether the supports at A, B, and C are fixed, pinned, or roller supports. This will affect the type and magnitude of reactions.
Draw a free-body diagram: Sketch the beam with the applied weight and the reaction forces at the supports. Indicate the direction and unknown magnitudes of the reactions.
Apply equilibrium equations: Write and solve the equations of equilibrium (sum of forces and sum of moments) to determine the unknown reactions at A, B, and C.
By following these steps and applying the principles of statics, you can calculate the magnitudes of the pin reactions at A, B, and C caused by the weight of the uniform 6000-lb beam.
Learn more about magnitudes here
https://brainly.com/question/14491586
#SPJ11
. An ideal vapor compression refrigeration cycle operates with a condenser pressure of 900 kPa. The temperature at the inlet to the compressor is -5oC. If this device operates using R134a as the working fluid, calculate the actual COP of this device as well as the maximum theoretical COP.
Answers
Answer:
Actual COP = 5.368
Maximum theoretical COP = 6.368
Explanation:
Given - An ideal vapor compression refrigeration cycle operates with a condenser pressure of 900 kPa. The temperature at the inlet to the compressor is -5oC.
To find - If this device operates using R134a as the working fluid. Calculate the actual COP of this device as well as the maximum theoretical COP.
Proof -
Given that,
An ideal vapor compression refrigeration cycle operates with a condenser pressure of 900 kPa.
From Refrigerant 134-a Table
At T1 = -5°C
h1 = 247.505 KJ/kg
S1 = 0.93434 KJ/kg
At P2 = 900 KPa
S1 = S2
h2 = 274.679 Kj/Kg
h3 = h4 = 101.61 KJ/g
So,
Compressor work (Wc) = h2 - h1
= 274.679 - 247.505
= 27.174
⇒Compressor work (Wc) = 27.174 KJ/kg
Now,
Heat out (Qout) = h2 - h3
= 274.679 - 101.61
= 173.069
⇒Heat out (Qout) = 173.069 KJ/kg
Now,
Heat input (Qin) = h1 - h4
= 274.505 - 101.61
= 145.895
⇒Heat input (Qin) = 145.895 KJ/kg
So,
Actual COP at the refrigerator is -
(COP)R = (Qin)/(Wc)
= (145.895)/ (27.174)
= 5.368
⇒Actual COP = 5.368
Now,
Maximum theoretical COP is -
(COP) = (Qout)/(Wc)
= (173.069)/ (27.174)
= 6.368
⇒Maximum theoretical COP = 6.368
Which of the following sentences correctly uses commas after prepositional phrases
Answers
Answer:
You didn't write full questions
Explanation:
Where are options? You say following but there is no any option
State Conditions necessary for static equilibrium of a particle of a rigid body
Answers
Answer:
Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.
Hi there!
For a particle to be in static equilibrium:
\(\huge\boxed{\Sigma \tau = 0}}\)
The sum of torques acting on the particle must equal 0 Nm.
\(\huge\boxed{\Sigma F = 0}}\)
The sum of forces acting on the particle must equal 0 N.
Both of these conditions MUST be met in order for a particle to be in STATIC equilibrium.
in a machine shop, two camshafts are made: one of aluminum (al), one of iron (fe). if they both have the same mass, which is larger?
Answers
aluminum (Al)
Aluminum has an atomic mass of 26.98
Iron has an atomic mass of 55.85
If both have the same mass finished, the aluminum camshaft must be larger.
list the way of similerite and differ bitween magnetic field and electric field
Answers
Similarities between magnetic field and electric field:Both magnetic fields and electric fields are fundamental concepts in electromagnetism.They are both vector fields, meaning they have both magnitude and direction.
Both fields are produced by a source. Electric fields are produced by electric charges, while magnetic fields are produced by moving charges (currents) or changing electric fieldsBoth fields exhibit the property of superposition, meaning that the total field at a point is the vector sum of the individual fields produced by each source.Both fields obey the principle of inverse square law, which states that the strength of the field decreases with the square of the distance from the source.Differences between magnetic field and electric field:Electric fields are produced by stationary electric charges, while magnetic fields are produced by moving electric charges or changing electric fields.
learn more about electromagnetism here :
https://brainly.com/question/31039466?
#SPJ11
An apple, potato, and onion all taste the same if you eat them with your nose plugged
Answers
Answer:
I didn't understand your question or is it a fun fact
The value of resistance r was determined by measuring current I flowing through the resistance with an error E1=±1. 5% and power loss p in it with an error E2=±1. 0%. Determine the maximum possible relative error to be expected on measuring resistance r, calculated from the formula r=p/I²
Answers
To determine the maximum possible relative error on measuring resistance (r) using the formula r = p/I², the maximum possible relative error to be expected on measuring resistance (r) is 3.16%.
we need to consider the error propagation. The maximum relative error (Δr/r) can be calculated using the formula:
Δr/r = sqrt((Δp/p)² + 4(ΔI/I)²)
Given that the error in power (Δp) is ±1.0% and the error in current (ΔI) is ±1.5%, we can substitute these values into the formula:
Δr/r = sqrt((0.01)² + 4(0.015)²)
Δr/r = sqrt(0.0001 + 4(0.000225))
Δr/r = sqrt(0.0001 + 0.0009)
Δr/r = sqrt(0.001)
Δr/r = 0.0316
To know more about measuring click the link below:
brainly.com/question/30271819
#SPJ11
HURRY
In the urban fire department, if a fire captain has a problem or issue that requires a decision by a higher official and the deputy chief position has not been filler, he or she may take the issue directly to the fire chief. true or false
Answers
Answer:
Yes, it is true.
.Major Internet applications such as the World Wide Web and file transfer rely on which protocol?
UPN
TCP
UDP
TPP
Answers
Major internet applications such as the World Wide Web and file transfer rely on the Transmission Control Protocol (TCP) protocol.
The Transmission Control Protocol (TCP) is one of the core protocols of the Internet Protocol (IP) suite. TCP is a connection-oriented protocol that provides reliable and ordered delivery of data between applications running on different hosts. It is widely used by major internet applications such as the World Wide Web, email, file transfer, and streaming media.
TCP works by dividing data into packets and sending them between hosts using IP. The protocol ensures that all packets are received in the correct order and that any missing or corrupted packets are retransmitted. TCP also manages flow control to ensure that data is sent at an appropriate rate and that network resources are used efficiently.
The reliability and robustness of TCP have made it the protocol of choice for many internet applications, particularly those that require the transfer of large amounts of data. However, its connection-oriented nature and the overhead involved in managing connections make it less suitable for applications that require low latency or real-time communication, such as online gaming or VoIP (voice over internet protocol).
Learn more about reliability here: brainly.com/question/32140635
#SPJ11