Electrical Installations and Branch Circuits

11. A feeder neutral with a load of 400 A would be permitted the demand factor applied to ________of the load.

A. 140 A B. 340 A C. 200 A D. 100 A

12. Receptacle outlets shall be installed so that no point along the floor line in any wall space is more than ________

from an outlet in such dwelling spaces as kitchens, family rooms, dining rooms, living rooms, and bedrooms.

A. 10 feet B. 4 feet C. 6 feet D. 8 feet

16. The NEC states that the neutral conductor of a three-wire branch circuit supplying a household electric range with a maximum demand of 8.75 kW shall be permitted to be smaller than the ungrounded conductors. However, the neutral ampacity shall not be less than _______ percent of the branch-circuit rating and shall not be smaller than 10 AWG.

Answer:

B because as a textile engineer, your job is to help design and create fabric, including the equipment and materials needed for fabrication.

The option which is not a property of the metal aluminium is; Option B;  is resistant to galvanic corrosion

Aluminum is a non - ferrous metal that is lightweight, durable, malleable and corrosion-resistant (not galvanic) which is widely used for components in the transportation and construction industries. Its's properties includes;

From all the listed properties and explanations, it is clear that the only option among those given that is not a property of aluminum is Option B

Read more about Metal Properties at; https://brainly.com/question/4701542

Answer:

(a) The functional unit used to compare is 20,000,000 lumen hours of light having a wavelength range of 450 nm to 600 nm

(b) 50,000 miles of use of each vehicle to convey passengers

(c) A proper functional unit is the annual safety and maintenance record estimated by the number of incidents recorded and maintenance performed per calendar year

Explanation:

The function of a product is the unambiguous  action it is meant to perform or the satisfaction it is meant to provide

Functional unit is a measure of the amount of a product function required to result in identified environmental impacts

(a) The functional unit used to compare CFL light bulb versus LED light bulb is 20,000,000 lumen hours of light having a wavelength range of 450 nm to 600 nm

The LED's lamp life span illumination is about and the wavelength is in the visible region

(b) Honda Civic Sedan versus Ford F150 Pickup

The functional unit here can be the the output input functions such as wear of the brake and tire, the amounts of emissions produced per amount of gasoline consumed multiplied by the function unit of 50,000 miles of use to convey passengers

(c)Suspension Bridge Connecting Italy and Sicily versus Underwater Tunnel connecting Italy and Sicily

A proper functional unit is the annual safety and maintenance record estimated by the number of incidents recorded and maintenance performed per calendar year.

While 480V three-phase squirrel cage motors may have more leads, they are normally in multiples of three, while single-phase capacitor-start motors and 120V shaded-pole motors typically have fewer leads.

A two-terminal electrical device known as a capacitor is capable of storing energy in the form of an electric charge. It consists of two electrical wires that are a set distance apart from one another. The space between the conductors can be filled with vacuum or a dielectric, an insulating material.

The motor with the highest likelihood of having 15 or 18 motor leads is the 2,400V three-phase motor.

Typically, three-phase motors have leads that are a multiple of three (e.g. 3, 6, 9, 12, etc.). 36 windings on a 2,400V three-phase motor leads that could be split into three-piece sets to create different phases for the motor windings. Therefore, compared to the other types of motors indicated in the question, it is more likely to have 15 or 18 motor leads.

To know more about motors visit:-

https://brainly.com/question/27824009

#SPJ4

Answer: -8.51 ft^3/lbm

Explanation:

In this question, to find the change in volume, we will use the ideal gas law.

\(\begin{aligned}&n_{1}=1 \text { mole }\\&\mathrm{P}_{1}=20 \mathrm{psia}\\&\mathrm{T}_{1}=70^{\circ} \mathrm{F}\\&T_{1}=(70+460)^{0} \mathrm{R}\\&v_{1}=\frac{\left(0.3704 \frac{psia \cdot_{\text { } ft^{3}}}{l \mathrm{lbm} \cdot R}\right)(70+460)^{0} \mathrm{R}}{20 \mathrm{psi}}\\&v_{1}=9.816 \frac{\mathrm{ft}^{3}}{\mathrm{lbm}}\end{aligned}\)

\(\begin{aligned}&\mathrm{n}_{2}=1 \text { mole } \\&\mathrm{P}_{2}=150 \mathrm{psia} \\&\mathrm{T}_{1}=\mathrm{T}_{2}=70^{0} \mathrm{~F} \\&\mathrm{~T}_{1}=\mathrm{T}_{2}=(70+460)^{0} \mathrm{R} \\&v_{2}=\frac{\left(0.3704 \frac{\text { psia} \cdot \mathrm{ft}^{3}}{\mathrm{lbm} \cdot R}\right)(70+460)^{0} \mathrm{R}}{150 \mathrm{psi}} \\&v_{2}=1.309 \frac{\mathrm{ft}{ }^{3}}{\mathrm{lbm}}\end{aligned}\)

\($$The change in volume is,$$\begin{aligned}&\Delta v=v_{2}-v_{1} \\&\Delta v=1.309-9.816 \\&\Delta v=-8.51 \frac{\mathrm{ft}^{3}}{\mathrm{lbm}}\end{aligned}\text{The negative sign shows that the gas was compressed during this process}\)

Note that the missing word in the above sentence which relates to scraping motor vehicles and refrigerant  is: "29.92"

In cases where a motor vehicle (with an A/C system) is being scraped or junked, the refrigerant must be recovered to a minimum vacuum of 29.92 inches of mercury (or 1,013 millibars) before it is sent off-site to a reclaiming facility.

This is necessary to prevent the release of ozone-depleting substances, such as chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs), into the atmosphere.

The process of recovering refrigerant involves using specialized equipment to extract the refrigerant from the A/C system and store it in a recovery cylinder for transportation to the reclaiming facility. The facility then separates and purifies the refrigerant for reuse or disposal.

Learn more about refrigerant  at:

https://brainly.com/question/28265596

#SPJ1

It is not safe to operate the motor with a 10-hp shaft load.

Explanation :
Solution-
First, determine the rated speed and current of the motor:
Rated speed = 850 r/min
Rated current = 500 V / (0.1414 ohms + 0.0412 ohms + 0.0189 ohms) = 30.22 A
Next, determine the speed and current for a 10-hp shaft load:
Speed = 1700 r/min
Current = 10 hp / (75 hp * 0.902) = 0.1343 A
Finally, determine whether it is safe to operate the motor with the 10-hp shaft load using the magnetization curve. we can see that the current at 1700 r/min is 0.1264 A, which is less than the current for the 10-hp shaft load (0.1343 A).

To know more about speed
https://brainly.com/question/28224010
#SPJ1

The thing that would be least significant in her introduction would be d.) Her dreams and personal ambitions

Because she happens upon a nationally-recognized researcher in petroleum geology and wants to introduce herself to him. her role and title, along with her company and business would be more suitable than personal goals and dreams.

This is because, this is a formal talk and should not include informal talk about personal dreams, but about petroleum geology.

Read more about petroleum geology here:

https://brainly.com/question/24268216

#SPJ1

Both technicians are partially correct.

Tech A is correct that when disconnecting the battery, the negative terminal should be disconnected first. This is a standard safety precaution to prevent any accidental short circuits or sparks that could occur if the positive terminal were disconnected first. By disconnecting the negative terminal first, any accidental contact with metal tools or other conductive materials will not create a circuit.

Tech B is also partially correct that baking soda and water can remove lead oxide from battery terminals. Lead oxide can form on the terminals of a battery over time, reducing its performance and causing problems with starting and charging. Mixing baking soda with water to create a solution can help to neutralize the acidic lead oxide and make it easier to clean off the terminals. However, it's important to follow the appropriate safety precautions when handling batteries, including wearing gloves and eye protection and avoiding contact with any spilled battery acid or electrolyte solution.

In summary, both Tech A and Tech B are correct, but only in part. It's important to follow the appropriate safety guidelines and protocols when working with batteries to prevent injury or damage to the vehicle.

The initial void ratio is the parameter which is used to show the structural foundations for each specimen of sand so that the method and speed of compression would be measured.

Relative density is the mass per unit volume of each specimen of sand which is measured and it has to do with the relative ratio of the density of the sand.

Unit weight is the the exact weight per cubic foot of the sand which is measured.

Please note that your question is incomplete so I gave you a general overview to help you better understand the concept

Read more here:

https://brainly.com/question/15220801

The example of the active reading strategy known as making mental image is said to be option C. Picturing the Earth over a campfire when you read the term global warming.

Global warming is seen as a kind of a long run heating of Earth's surface and it was one that is known to have been observed as at the time of the pre-industrial period (that is said to be between 1850 and 1900).

Note that it is one that was known to have occurred as a result of  the human activities, such as fossil fuel burning, that is said to be increasing  heat-trapping greenhouse gas levels.

Therefore, The example of the active reading strategy known as making mental image is said to be option C. Picturing the Earth over a campfire when you read the term global warming.

Learn more about global warming from

https://brainly.com/question/3553382

#SPJ1

See full question below

Which of the following is an example of the active reading strategy known as

"making mental images"?

A. Restating, in a few brief sentences, the main points of an article

about how hurricanes form

B. When reading about space science, asking yourself how it is

possible for a satellite to orbit Earth

C. Picturing the Earth over a campfire when you read the term global

warming

D. Rereading an article about telescopes after not understanding the

article the first time you read it

Answer:

Explanation:.

I inferred you meant emerging technologies we see today.

Explanation:

1. 3D Printing

A three dimensional printing allows a digital model to be printed (constructed) into a physical object.

A box, an industrial design and many more could be printed within minutes.

2. AI voice recognition devices

Another trend in the tech world is the rise in artificial intelligence been used in voice recognition devices that not only recognize one's voice but also take commands from the user.

This technology allows one to listen to the internet, such as listening to music online.

The tech world is ever changing with new technology beyond one's consumption on the increase daily.

Thin metal blades or flexible bands with teeth on one edge, thin grinding wheels, or thin metal disks with teeth on their edges can all be used as sawing machine cutting tools.

Sawing machine is defined as a device for cutting forms out of raw material plates or cutting apart bars of material. It is used to sever material, usually wood, but occasionally metal or stone. The material is cut by pressing the toothed edge against it and pushing it swiftly forward, slowly backward, or continually forward.

Rotating blades, reciprocating blades, and circulating blades are the three basic types of power sawing machines.

Thus, thin metal blades or flexible bands with teeth on one edge, thin grinding wheels, or thin metal disks with teeth on their edges can all be used as sawing machine cutting tools.

To learn more about sawing machine, refer to the link below:

https://brainly.com/question/366955

#SPJ1

The PoE feature eliminates the need for a separate electrical outlet for your wireless access point (WAP).

A wireless access point (WAP) is a device that connects wireless devices to a wired network. Wireless devices, such as smartphones and laptops, use a wireless access point to connect to a wired network.

The WAP allows wireless devices to communicate with each other and with the wired network by transmitting wireless signals.

PoE, or Power over Ethernet, is a technology that allows network cables to carry electrical power. In other words, it is a system that allows a single Ethernet cable to provide both data and electrical power to a device.

Learn more about WAP at:

https://brainly.com/question/32169658

#SPJ11

The Power over Ethernet (PoE) feature eliminates the need for a separate electrical outlet for your Wireless Access Point (WAP). With PoE, power is transmitted over Ethernet cables along with data.

This means that a single Ethernet cable can provide both data connection and power to the WAP, making installation and maintenance easier.

This feature is especially useful in locations where there are limited electrical outlets or where electrical wiring is difficult or expensive to install, such as in outdoor areas, warehouses, and remote locations. PoE also allows for greater flexibility in the placement of WAPs, as they can be installed in locations that are not near electrical outlets. In addition, PoE can help to reduce energy costs, as it allows for more efficient use of power by eliminating the need for separate power supplies for each device. Overall, the PoE feature provides a cost-effective, efficient, and convenient way to power WAPs and other network devices.

To know more about Wireless visit:

https://brainly.com/question/13014458

#SPJ11

Answer:

1. Drawing grid.

2. Orthogonal.

3. Geometries.

4. CTRL+N.

5. Thirteen (13).

Explanation:

CAD is an acronym for computer aided design and it is typically used for designing the graphical representation of a building plan. An example of a computer aided design (CAD) software is AutoCAD.

Some of the features of an AutoCAD software are;

1. Drawing grid: is a regular pattern of dots displayed on the screen of an AutoCAD software, which acts as a visual aid and it's also used to define the extent of a drawing.

2. Ortho is short or an abbreviation for orthogonal, which means either vertical or horizontal.

3. Tangent is a point where two geometries meet at just a single point.

4. If you want to create a new drawing, simply press CTRL+N for the short cut key.

5. There are thirteen object snaps (Osnap) that can help you perform your task on AutoCAD easily. The 13 object snaps (Osnap) are; Endpoint, Midpoint, Apparent intersect, Intersection, Quadrant, Extension, Tangent, Center, Insert, Perpendicular, Node, Parallel, and Nearest.

Answer:

Do not use I me my we. Less exclamation points, bigger words like "Pompous" Lots of uptight language, as if you are at an interview. structure should be precise and sharp, sharper than Angelina Jolie's cheekbones

Explanation:

To determine the vertical displacement of joint A using the method of virtual work, we need to first find the forces in each member. We can do this by using the method of sections and analyzing the left and right sides separately.

Starting with the left side, we can sum the vertical forces to get:
3k - F1*sin(45) - F2*sin(45) = 0
where F1 and F2 are the forces in members AB and AC, respectively.

Similarly, summing the moments about point A gives:
-8*F1*sin(45) - 12*F2*sin(45) = 0

Solving these two equations, we get F1 = 4.5 kips and F2 = 3 kips.

Now we can use the method of virtual work to find the displacement of joint A. We will apply a virtual load of 1 kip in the upward direction at joint A and find the corresponding change in potential energy of the structure.

The virtual work done by this load is:
Wv = 1*(3/12) = 0.25 in-kips

The change in potential energy is given by:
ΔU = F1*δ1 + F2*δ2
where δ1 and δ2 are the displacements in members AB and AC, respectively.

Using the principle of virtual work, we can equate the virtual work done to the change in potential energy:
Wv = ΔU

Substituting in the values we found earlier, we get:
0.25 = 4.5*δ1 + 3*δ2

We also know that the total vertical displacement at joint A is given by:
δA = δ1 + δ2

To solve for δA, we can use the fact that the displacement of any point in a structure is equal to the partial derivative of the total potential energy with respect to the force at that point. This is known as Castigliano's theorem.

Taking the partial derivative of ΔU with respect to F1, we get:
δ1 = -∂ΔU/∂F1 = -4.5*(12/29)/sin(45) = -1.33 in

Taking the partial derivative of ΔU with respect to F2, we get:
δ2 = -∂ΔU/∂F2 = -3*(12/29)/sin(45) = -0.89 in

Substituting these values into the equation for δA, we get:
δA = -1.33 - 0.89 = -2.22 in

Therefore, the vertical displacement of joint A is -2.22 in.

For such more question on Castigliano's theorem

https://brainly.com/question/31388148

#SPJ11

The rating of the service disconnecting means for a single-family home must be at least 100 amperes, 3-wire.Therefore, 100 amperes is the required minimum rating of service size for a one-family home.

What is the service's required minimum ampere rating?

        To learn more about ampere rating  refer

       https://brainly.com/question/18975063

        #SPJ1

Answer:

no

Explanation:

How many trees would it take to reverse climate change?

1.2 trillion trees

Crowther says planting 1.2 trillion trees would give a reduction "way above" that figure. To put that in context, global CO2 emissions are around 37 billion tons per year.Apr 17, 2019

The composition of gas in the feed, the percentage conversion and the

theoretical yield are combined to give the product stream composition.

Response:

The composition of gas in the product stream are;

The amount of oxygen used = 30% exceeding the theoretical amount

Number of moles of hydrochloric acid = 4 kmol/h

Percentage conversion = 80%

Required:

The composition of the gas in the product feed.

Solution;

The given reaction is; 4HCl + O₂ \(\longrightarrow\) 2Cl₂ + 2H₂O

\(Percentage \ conversion = \mathbf{ \dfrac{Moles \ of \ limiting \ reactant \ reacted}{Moles \ of \ limiting \ reactant \ supplied \ in \ the \, feed}}\)

Which gives;

\(80 \% = \mathbf{ \dfrac{Moles \ of \ limiting \ reactant \ reacted}{4 \, kmol/h}}\)

Moles of limiting reactant reacted = 4 kmol/h × 0.80 = 3.6 kmol/h

Which gives;

Number of moles of HCl in the stream = 4 kmol/h - 3.6 kmol/h = 0.4 kmol/h

Number of moles of Cl₂ produced = 2 kmol/h × 0.8 = 1.6 kmol/h

Similarly;

Number of moles of H₂O produced = 2 kmol/h × 0.8 = 1.6 kmol/h

Number of moles of O₂ in the product stream = 30% × 1 kmol/h + 20% × 1 kmol/h = 0.5 kmol/h

The composition of the production stream is therefore;

Learn more about theoretical and actual yield here:

https://brainly.com/question/14668990

https://brainly.com/question/82989

Answer:A 270 degrees

Explanation:

What is Auto Cad?

Answer : AutoCAD is a commercial computer-aided design (CAD) and drafting software application. Developed and marketed by Autodesk, AutoCAD was first released in December 1982 as a desktop app running on microcomputers with internal graphics controllers.

This is the Answer for your question :3

I hope you are having a great day ❤️❤️❤️❤️❤️

(a) The tooling is called a punch-and-die. (b) The machine tool is called a stamping press.

Manufacturing ferrous or nonferrous metal goods, structural metal products, metal forgings, and metal stampings are all included in metalworking processes. They also involve a variety of other metal and wire goods, including silverware, watches, clocks, scientific measuring and regulating devices, and jewelry.

Punch and dies are a type of cutting tool equipment utilized in the high-heat metal forming process known as forging and punching. The cutting workpiece needs a "punch" to act as a pusher, and the punch pushes in the die as a secondary item.

Learn more about metalworking operations :

https://brainly.com/question/13739109

#SPJ4

When moving over-dimensional cargo by rail, a freight forwarder should be aware of the following factors:

1. Regulations and Permits: Over-dimensional cargo is subject to various regulations and permit requirements imposed by the railway authorities and local governing bodies. Freight forwarders must be familiar with these regulations and obtain the necessary permits before arranging the transportation.

2. Clearance and Route Planning: Over-dimensional cargo requires careful clearance and route planning to ensure that the cargo can pass safely through tunnels, bridges, and other structures along the rail network. Freight forwarders should consider the height, width, and weight restrictions of the cargo and select the appropriate routes accordingly.

3. Equipment and Handling: Specialized equipment may be required for loading, unloading, and securing over-dimensional cargo on railcars. Freight forwarders should ensure that the necessary equipment, such as cranes or specialized railcars, is available at the origin and destination points. They should also coordinate with rail operators to ensure proper handling and securement of the cargo during transit.

4. Timelines and Schedules: Moving over-dimensional cargo by rail may require additional time compared to standard cargo due to the need for route planning, obtaining permits, and potential speed restrictions. Freight forwarders should consider these factors and communicate realistic timelines to their customers to manage expectations.

5. Safety and Risk Management: Safety is of utmost importance when transporting over-dimensional cargo by rail. Freight forwarders should assess potential risks and hazards associated with the cargo, such as stability during transit, and implement appropriate safety measures. They should also work closely with rail operators to ensure compliance with safety protocols and regulations.

6. Documentation and Communication: Freight forwarders must ensure accurate documentation and communication throughout the transportation process. This includes preparing proper shipping documentation, coordinating with rail operators, and providing relevant information to all parties involved, such as the shipper, consignee, and railway authorities.

7. Cost Considerations: Moving over-dimensional cargo by rail can involve additional costs compared to standard cargo. Freight forwarders should consider factors such as specialized equipment, permits, and route planning when calculating the overall transportation costs. They should provide transparent cost estimates to their customers and manage cost expectations accordingly.

By being aware of these factors and effectively managing the challenges associated with transporting over-dimensional cargo by rail, freight forwarders can ensure a smooth and successful transportation process for their customers.

When moving over-dimensional cargo by rail, freight forwarders should be aware of several factors to ensure a smooth and successful transportation process. These factors include:

Regulations and Permits: Freight forwarders need to be knowledgeable about the specific regulations and permits governing the transportation of over-dimensional cargo by rail. This includes understanding weight limits, height restrictions, width restrictions, and any other relevant regulations imposed by railway authorities or governmental agencies.

Route Planning: Freight forwarders must carefully plan the route for transporting over-dimensional cargo to ensure that it can safely navigate through rail infrastructure, including tunnels, bridges, and overhead clearances. They need to consider the most suitable rail lines and identify any potential obstacles or restrictions along the way.

Clearance and Communication: Freight forwarders should maintain clear and effective communication with the railway operator and other stakeholders involved in the transportation process. They need to provide accurate information about the dimensions, weight, and specific requirements of the cargo to ensure appropriate clearances and necessary arrangements are made.

Equipment and Handling: Freight forwarders should ensure that the railcars or specialized equipment used for transporting over-dimensional cargo are suitable for the specific requirements of the cargo. This may include flatcars, well cars, or specialized platforms equipped with appropriate securing mechanisms to prevent shifting or damage during transit.

Safety and Security: Freight forwarders need to prioritize safety and security measures throughout the transportation process. This involves verifying that the cargo is properly secured and protected, following safety protocols during loading and unloading, and coordinating with railway personnel to address any potential safety concerns.

Documentation and Insurance: Freight forwarders should handle all necessary documentation, including permits, licenses, shipping instructions, and insurance coverage. They need to ensure that all paperwork is accurate, complete, and compliant with relevant regulations and contractual obligations.

Monitoring and Tracking: Freight forwarders should have mechanisms in place to monitor and track the movement of over-dimensional cargo during rail transportation. This enables them to provide real-time updates to their clients and promptly address any issues or delays that may arise.

By being aware of these factors and effectively managing them, freight forwarders can ensure the safe and efficient transportation of over-dimensional cargo by rail.

Learn more about transportation from

https://brainly.com/question/27667264

#SPJ11

A gravitational force of 4.93 10-12 N in the positive x-direction is applied by the copper sphere to the steel sphere.

Along the line connecting the centres of the two objects, the force is applied. Coulomb's law has an undesirable effect if the two charges have opposing signs. This indicates that there is an attractive force acting on the particles.

\(F = G * m1 * m2 / r^2\)

\(m = rho * (4/3) * pi * r^3\)

r = 65 mm = 0.065 m

a = 3.7r = 0.241 m

b = 2.1r = 0.137 m

c = 0.6r = 0.039 m

m_copper = rho_copper \(* (4/3) * pi * r^3\)

\(= 8,960 kg/m^3 * (4/3) * pi * (0.065 m)^3\)

= 0.0138 kg

m_steel = rho_steel \(* (4/3) * pi * r^3\)

= \(7,860 kg/m^3 * (4/3) * pi * (0.065 m)^3\)

= 0.0119 kg

F = G  m_copper  m_steel / \(r^2\)

= \(6.674 × 10^-11 N·(m/kg)^2 * 0.0138 kg * 0.0119 kg / (0.065 m)^2\)

\(= 4.74 × 10^-11 N\)

u = (0.241 - 0.137)i + 0j + 0k

= 0.104i + 0j + 0k

So the gravitational force F can be expressed as:

\(= 4.74 × 10^-11 N\)

\(= 4.74 × 10^-11 N\)

To know more about force visit:-

https://brainly.com/question/30478824

#SPJ1

Answer:

the types of social responsibility are as follows

1)Environmental Responsibility

2)Ethical Responsibility

3)Philanthropic Responsibility

4)Economic Responsibility

Social responsibility is an obligation every person has to do to uphold a balance among the economy as well as the environment. Social responsibility refers to maintain the balance between the environment and the budget.

It affects not only corporate governments but also everybody whose activity impacts the climate.

The Social responsibility towards the environment are as follows

1)Defend the environment, create balanced use of natural ingredients, and take important steps to stop pollution from the several processes adopted by the industries.

2)Encourage the viable use of raw resources and natural materials. Introduce strategies for continuously enlightening our environmental duty.

Introduce rules for continuous development in their ecological performance.

Obey with the law in force on conservational protection, and with other willingly recognized promises.

3)To encourage, by on-the-job practice, the participation of all our workers, independently and based on the team, in environmental safety problems.

4)To unite with the liable Agencies as well as Governmental Authorities.

To proceed with environmental protection courses.

5)To talk and report on our eco-friendly management struggles.

Implement and sustain the necessities of a Chain of Custody.

6)Stop trade and acquisition of illegally obtained wood.

7)Apply and continue a due industry system to avoid the acquisition and sale of criminally harvested timber and its products.