expand x'y xy' to sum-of-minterms form x'yz x'yz' xy'z xy'z' 1. select a property from the right to apply
Answers
To expand the expression x'y xy' to sum-of-minterms form, you can use the Distributive Property.
The Distributive Property states that a(b+c) = ab + ac. Applying this to the expression x'y xy' gives us the following: x'y (x+y') = x'yx + x'yy'. This can then be further simplified to x'yz + x'yz' + xy'z + xy'z'.
To further develop the expression x'yz + x'yz' + xy'z + xy'z', you can use the DeMorgan's Laws. DeMorgan's Laws are two theorems that provide a way to simplify logic expressions involving negations.
Learn more about The Distributive Property:
https://brainly.com/question/2807928
#SPJ4
Related Questions
Hey guys can anyone list chemical engineering advancement that has been discovered within the past 20 years
Answers
Nanopesticides. The world population keeps growing. ...
Enantio selective organocatalysis. ...
Solid-state batteries. ...
Flow Chemistry. ...
Porous material for Water Harvesting. ...
Directed evolution of selective enzymes. ...
From plastics to monomers. ...
i. Draw the velocity diagram for the instant shown and determine the velocity of
sliding of the piston relative to the cylinder and the angular velocity of link
DP.
ii. Draw the acceleration diagram for the instant shown and determine the
acceleration of sliding of the piston relative to the cylinder and the angular
acceleration of link DP.
Answers
Answer:
?????????????????????????????????????
The ASIAN Transmission company makes and sells certain automotive parts present sales volume is 500,000 units per year at selling price of fifty centavos (₱0.50) per unit. Fixed expenses total ₱80, 000 per year.
5. What is the present total profit for a year?
6. What is the breakeven units of productions?
Answers
Answer:
5. ₱170,000
6. 160,000 units
Explanation:
5. At a sales volume of 500,000 units, the revenue is ...
₱0.50 × 500,000 = ₱250,000
The profit s the difference between revenue and cost:
profit = ₱250,000 -₱80,000
profit = ₱170,000
__
6. The break-even quantity is the number that produces a revenue equal to cost:
₱0.50×q = ₱80,000
q = ₱80,000/₱0.50 = 160,000
The break-even quantity is 160,000 units.
What kind of plan or development of road can be done to avoid traffic?
Answers
Answer: Breakdown Lanes
Reason: With breakdown lanes when a car needs to stop it can go to the backdown lane and fix its issue.
On a negatively grounded system, the
Jump Pack negative clamp should be
attached to the when engine starting.
Answers
Answer:
Explanation:
The positive (red) cable should be attached to the positive terminals on each battery. The negative (black) cable should have one end attached to the negative terminal of the dead battery, and one end grounded.
Start by connecting the positive (often red) clamps of the jumper cables to the positive terminals of your battery. These are often marked, but they can be hard to see. Be sure to look closely to ensure that you are connecting to the right portion of the battery.
which of the following is true for the depletion region capacitance of a pn junction? select one: a. all of these b. the capacitance depends on the square root of the reverse bias for an abrupt step junction c. the capacitance depends on the cube root of the reverse bias for a linearly graded junction d. the capacitance decreases as the reverse bias increases e. the amount of charge stored increases as the reverse bias increases
Answers
All of these statements are true.
The depletion region functions as an insulating or dielectric substance. P-n junction diodes can therefore be compared to parallel plate capacitors.
What is PN junction?A P-N junction is the boundary or interface between the p-type and n-type semiconductor material types inside of a semiconductor.The process of doping produces the P-N junction in a semiconductor.In an electrical circuit, a diode (PN junction) makes it easier for current to flow in one way than the other.While reverse biasing is applying a voltage across a diode in the opposite direction, forward biasing refers to applying a voltage across a diode that facilitates easy current passage. High resistance is present in the p-n junction diode's depletion zone.As a result, the depletion region functions as an insulating or dielectric substance.P-n junction diodes can therefore be compared to parallel plate capacitors.Transition capacitance is the measurement of how much capacitance changes as voltage increases.
To learn more about semiconductor refer,
https://brainly.com/question/27753295?source=archive
#SPJ4
One of the cylinder's content is under pressure at 1900 psi (per the gauge) at 70°F. As the day heats up because of the sun, the temperature increases to 105°F. What is the pressure at 105°F?
Answers
The pressure would be doubled (3800psi) as the day heats up because of the sun, the temperature increases to 105°F.
What is relationship between pressure and temperature?If the temperature is on the kelvin scale, then P and T are directly proportional (again, when volume and moles of gas are held constant); if the temperature on the kelvin scale increases by a certain factor, the gas pressure increases by the same factor. We find that temperature and pressure are linearly related.Examine the connection between a gas's temperature and the pressure it applies to its container. This is generally known as Gay-Law Lussac's or Amontons' Law of Pressure-Temperature. A gas will exert greater pressure on its container as its temperature rises.As the temperature rises, the pressure must as well since pressure is the force the particles per unit of area exert on the container. If the quantity of particles and the container's volume remain constant, pressure and temperature are proportionate.Learn more about Pressure and temperature refer to :
https://brainly.com/question/29146761
#SPJ1
the forked rod is supported by a collar at a, a thrust bearing at b, and a cable cd. determine the tension within cable cd, and the x, y, z components of reaction at supports a and b. the supports at a and b are in proper alignment and exert only force reactions on the rod
Answers
The equilibrium condition of forces and moment, which states that the total of the moment and forces is equal to zero, was applied in the aforementioned solution.
the wire is tense Tcd = 114.8912 N
Response forces
Ay = 60 N and Az = 0 at A
Bx = -20 N at B
By = -20 N\sBz = 0
When Newton's first law is true, the thing is in its equilibrium condition. When all external forces acting on an item (including moments) are balanced, that object is said to be in equilibrium in the reference coordinate system. This indicates that all external forces and moments acting on this item have a net effect of zero.
Newton's first law states that an object at rest will remain at rest, and an object in motion won't alter its velocity while the equilibrium condition is met.
Learn more about Equilibrium here:
https://brainly.com/question/13258910
#SPJ4
Which of the following is useful for actually resolving moral controversies rather than merely classifying them?
Answers
Answer: you forgot to add the rest of the Questions in.
"An electric power distributor charges residential customers $0.08 per kilowatt-hour (kWh). The company advertises that ""green power"" is available in 145 kWh blocks for an additional $3.50 per month. (green power is generated from solar, wind power and methane sources.) If a certain customer uses an average of 400 kWh per month and commits to one monthly 150 kWh block of green power, what is her annual power bills?
What is the average cost per kWh with green power during the year? why does green power cost more than conventional power?
Answers
The annual power bill for this customer would be $1,076. This includes the cost of 400 kWh per month at $0.08 per kWh, plus 12 monthly blocks of 145 kWh green power at an additional cost of $3.50 per month.
The average cost per kWh with green power during the year would be $0.087 per kWh. This is calculated by the sum of monthly cost of 400 kWh at $0.08 per kWh, plus the 12 monthly blocks of 145 kWh green power at an additional cost of $3.50 per month, and dividing by the total number of kilowatt-hours used during the year (400 + 145 = 545).
There are a few factors that could make green energy more expensive than traditional energy. First, compared to conventional power, the infrastructure for producing and delivering green energy is frequently more expensive. Second, suppliers can charge more since there is frequently a greater demand for green energy than for conventional energy.
Green power is defined as electricity generated from renewable energy sources similar as solar, wind, geothermal, biogas, eligible biomass, and low- impact small hydroelectric sources.
Therefore, green power may be more expensive than conventional power due to government incentives or regulations.
To learn more on green power, here:
https://brainly.com/question/31914861
#SPJ4
Due to crashes at a railroad crossing in Salem, Oregon, an overpass (with a roadway surface 26 ft above the existing road) is to be constructed on an existing level highway. The existing highway has a design speed of 50 mi/h. The overpass structure is to be level, centered above the railroad, and 180 ft long. What length of the existing level highway must be reconstructed to provide an appropriate vertical alignment
Answers
Answer:
Oregon had 19 railroad crossing accidents in 2018, up from 10 in 2013. Marion County has more than most counties, logging 28 since 2008.
Explanation:
It provides explicit guidance to improve railroad crossing safety to support ODOT’s mission of a safe and efficient transporta-tion network, but is not a policy plan. Rather, it is an action plan to help ODOT achieve greater railroad crossing safety.
To establish a suitable vertical alignment, the present level highway's 2115-foot length needs to be rebuilt.
What is Vertical alignment?The ground's gradient and vertical curves are both included in vertical alignment.
For above given example,
Calculating the maximum permitted gradient is possible.
\(G = (V^2) / (29.83R)\)
where, G is the gradient,
V is the design speed in mph.
R is the curvature's radius in feet.
\(G = (55^2) / (29.83 * 26)\)= 0.72%
Calculating the minimum viewing distance as:
\(S = 1.47Vt + 2.3(t^2) / (3.5K) (3.5K)\)
where t is the perception-reaction time in seconds, K is the coefficient of friction, and S is the minimum sight distance in feet.
The minimum sight distance can be estimated as follows using an assumption of a perception-reaction time of 2.5 seconds and a coefficient of friction of 0.3:
524.3 feet are equal to S = 1.47 x 55 x 2.5 + 2.3(2.52)/(3.5 x 0.3)
Now that we know how long the current level highway is,
The overpass's length and the sag curve's length are equal.
The following equation can be used to determine the length of the crest curve:
\(L = (S^2) / (8G)\)
where L is the length of the crest curve, S is the shortest sight distance, and G is the highest permitted gradient.
\(L = (524.3^2) / (8 * 0.0072) = 188,607.8 ft\)
The length of the sag curve, the length of the crest curve, and the length of the transition curves all make up the entire length of the level highway that needs to be rebuilt.
Assuming a 50-foot-long transition curve, we obtain:
Overall length is equal to 180 + 188,607.8 + (2 x 50) ft.= 2115 feet
Thus, the existing level highway measures 188,887.8 feet in length, which is equal to 2,265,853.6 inches or 2115 feet.
Learn more about the vertical curve, here:
brainly.com/question/28812778
#SPJ2
Your question is incomplete, most probably the complete question is:
Due to crashes at railroad crossing, an overpass (with a roadway surface 26 ft above the existing road) is be constructed on an existing level highway. see illustration below. the existing highway has a design speed of 55 mi/hr. the overpass structure is to be level, centered above the railroad, and 180 ft long.
What is the length of the existing level highway must be reconstructed to provide an appropriate vertical alignment? assume that the sag and crest vertical curves are directly connected (i.e., there is no constant grade section).
You are required to source suppliers for a digital decoder for radio signals for rural people. Several suppliers have been identified to source and supply decoders. Carry out a supplier development programme for identified suppliers. 4.1 Explain the steps in supplier development. 4.2 Develop an ethical code of conduct for the selected suppliers. 4.3 Explain Ethical issues relating to suppliers
Answers
4.1 Assessing supplier capabilities, identifying improvement areas, providing training and support, establishing performance metrics, and continuous monitoring and evaluation.
4.2 An ethical code of conduct for selected suppliers should outline expectations regarding honesty, integrity, fair business practices, respect for human rights, and environmental sustainability.
4.3 Ethical issues relating to suppliers may include child labor, forced labor, unfair wages, unsafe working conditions, environmental pollution, bribery, and corruption.
4.1 Supplier development involves a series of steps aimed at improving the capabilities and performance of selected suppliers. The steps typically include:
- Assessing supplier capabilities: This involves evaluating the suppliers' technical expertise, production capacity, quality management systems, and financial stability.
- Identifying improvement areas: Based on the assessment, areas requiring improvement are identified, such as process efficiency, quality control, or product innovation.
- Providing training and support: Suppliers are offered training programs, technical assistance, and guidance to enhance their capabilities and meet the required standards.
- Establishing performance metrics: Key performance indicators (KPIs) are defined to measure supplier performance, such as on-time delivery, product quality, and responsiveness.
- Continuous monitoring and evaluation: Regular monitoring and evaluation of supplier performance are conducted to ensure ongoing improvement and address any issues that arise.
4.2 An ethical code of conduct for selected suppliers should outline the expected ethical behavior and standards. It may include principles such as:
- Honesty and integrity: Suppliers should conduct their business in an honest and transparent manner, avoiding fraudulent practices or misleading information.
- Fair business practices: Suppliers should adhere to fair competition, avoid collusion or price fixing, and respect intellectual property rights.
- Respect for human rights: Suppliers should ensure the protection of human rights, including prohibiting child labor, forced labor, discrimination, and ensuring fair and safe working conditions.
- Environmental sustainability: Suppliers should commit to environmentally responsible practices, minimizing waste, pollution, and promoting sustainability initiatives.
4.3 Ethical issues relating to suppliers can arise in various areas. Some common ethical concerns include:
- Labor practices: This includes issues such as employing child labor, paying unfair wages, subjecting workers to unsafe working conditions, or denying workers their rights.
- Environmental impact: Suppliers may engage in practices that harm the environment, such as excessive resource consumption, pollution, or improper waste disposal.
- Bribery and corruption: Suppliers may engage in bribery or corruption to gain undue advantages or secure contracts.
- Supply chain transparency: Ethical issues can arise if suppliers in the supply chain engage in unethical practices, such as sourcing materials from conflict zones or using suppliers with unethical practices.
Addressing these ethical issues requires establishing clear expectations through the ethical code of conduct, regular monitoring and audits, promoting transparency, and fostering a collaborative relationship with suppliers to address any concerns and drive continuous improvement in ethical practices.
Learn more about performance metrics here:
brainly.com/question/33431985
#SPJ11
what plan locates all of the structural elements that make up the floor system including; floor joists, rim joists, beams, headers, posts, stair openings, etc.?
Answers
The floor plan is a drawing that shows the layout of the structural elements that make up the floor system of a building.
What are the contents of floor plan?It typically includes the location of floor joists, rim joists, beams, headers, posts, and stair openings, as well as any other elements that make up the floor system.
The floor plan is an important part of the overall building plan, as it shows the layout of the structural elements that support the weight of the floor and the loads placed on it. It is used by architects, engineers, and contractors to understand the layout and design of the floor system, and to ensure that it is structurally sound and meets the requirements of the building code.
To Know More About floor plan, Check Out
https://brainly.com/question/2486619
#SPJ4
discuss the difference between a dual split and a diagonal split master cylinder.
Answers
Answer:
The difference between the dual split Master cylinder and diagonal split Master cylinder is dual split it makes power brakes less prone to failure while diagonal split is when the left rear and right front brakes are on one hydraulic line while the right front and left rear brakes are on another.
The distinction between a diagonal split and a dual split master cylinder Power brakes are less likely to fail when the master cylinder is dual split, while diagonal splitting occurs when the left rear and right front brakes are connected to one hydraulic line while the right front and left rear brakes are connected to another.
What is meant by master cylinder?The hydraulic pump in a car's braking system, which includes a cylinder and one or more pistons and pushes hydraulic fluid under pressure to the brakes at each wheel, is activated by pressing the brake pedal.
In order to convert the pressure on the brake pedal to hydraulic pressure, the master cylinder, also known as the master brake cylinder, feeds brake fluid into the brake circuit and regulates this in accordance with the mechanical force.
Thus, The distinction between a diagonal split and a dual split master cylinder Power brakes are less likely to fail.
For more details about master cylinder, click here:
https://brainly.com/question/15707688
#SPJ2
All of the following are sources of particulate matter EXCEPT (a) combustion of biofuels. (b) incomplete natural gas combustion. (c) road construction.
Answers
All of the given are sources of particulate matter except road construction.
Since, Both option (a) combustion of biofuels and option (b) incomplete natural gas combustion are sources of particulate matter, as they both release small particles into the air that can be harmful to human health and the environment.
However, road construction does not typically involve the release of particulate matter into the environment.
Hence, Based on the information you provided, the answer would be option (c) road construction.
Learn more about matter visit:
https://brainly.com/question/30339761
#SPJ4
What are the four different types of auto body shops and three different positions within the shop?
Answers
Types; 2 Auto body repair; 3 Auto glass repair; 4 See also; 5 References ... Independent automobile repair shops in the US may also achieve certification through manufacturer sponsored ...
how long did it take you to answer all of these questions
Answers
Answer:
not sure
Explanation:
not sure
fill in the blank. in a connector/python program, the _____ method prevents _____, which is a type of attack that causes a program to execute malicious sql statements.
Answers
In a connector/python program, the "execute()" method prevents SQL injection, which is a type of attack that causes a program to execute malicious SQL statements.
SQL injection attacks occur when an attacker uses input fields to inject SQL commands into the database. This can lead to unauthorized access to sensitive information, data theft, and even website defacement.
The "execute()" method in Python sanitizes input fields and ensures that only valid SQL commands are executed, protecting the program from SQL injection attacks. It is important to use proper security measures like this in all database-driven programs to ensure the safety and security of user data.
Learn more about SQL at https://brainly.com/question/14057636
#SPJ11
Discuss the role of a model in software engineering. Identify
and elaborate on two properties of a model.
Answers
In software engineering, a model is a representation of an actual system. It is used to explain and analyze the behavior of a system. The model is used to validate system requirements and to communicate between developers and stakeholders.
The role of a model in software engineering is to serve as an abstraction that is useful for simplifying complex systems. Models can be used to simulate the behavior of a system, and can be used to test the system in different scenarios. By using models, developers can identify potential problems early in the development process, and can improve the quality of the software that they are developing.Two properties of a model are:1. Abstraction: A model is an abstraction of the system it represents. It only shows the essential details that are needed to understand and analyze the system. By using an abstraction, models can be used to represent complex systems in a simpler way.2. Representation: A model is a representation of the system it represents. It can be used to simulate the behavior of the system, and can be used to test the system in different scenarios. By using models, developers can identify potential problems early in the development process, and can improve the quality of the software that they are developing.
To know more about communicate, visit:
https://brainly.com/question/31309145
#SPJ11
consider an automobile dealership with three locations. Data fields exist for stock number, vehicle identification number, make, model, year, color, and invoice cost. Identify the possible candidate keys, the likely primary key, a probable foreign key, and potential secondary keys.
Answers
Possible candidate keys for this automobile dealership include the stock number and the vehicle identification number (VIN), as they are unique identifiers for each vehicle in the dealership's inventory.
The likely primary key would be the stock number or VIN, as they are both unique and can be used to easily search and retrieve information about a specific vehicle.A probable foreign key could be the invoice number, as it may be used to link vehicle information with the dealership's accounting system. For example, a sales transaction for a specific vehicle may reference the invoice number, which can be used to retrieve the invoice cost and other financial information.Potential secondary keys could include the make, model, year, and color of the vehicle. These fields can be used to search and filter the inventory based on specific criteria, such as finding all vehicles of a certain make or year.
To learn more about vehicle click the link below:
brainly.com/question/15188444
#SPJ1
Technician a says that the ect and iat sensors can be tested visually, as well as by using a digital multimeter or a scan tool. Technician b says that the ect sensor is a high-authority sensor at engine startup and is used for open-loop control, as well as idle speed. Which technician is correct?
Answers
Both technicians A and B are correct. Temperature sensors are devices that detect and measure coldness and heat and convert it into an electrical signal.
Types of Contact Temperature Sensors - Conduction is used to track temperature changes in these temperature sensor types, which must be in direct physical contact with the object being sensed. Throughout a wide temperature range, they can be used to find solids, liquids, or gases.We are all familiar with the fact that heat is produced by the motion of molecules and atoms (kinetic energy), and that the higher the motion, the more heat is produced. With the use of temperature sensors, we may "sense" or detect any physical change in that temperature, providing either an analogue or digital output. Temperature sensors quantify the quantity of heat energy, or even coldness, that is generated by an object or system.
learn more about Temperature sensors here:
https://brainly.com/question/13161844
#SPJ4
Calculate the total amount of heat rejected by each of these plants to the environment
in one year, assuming their availability factors are 83%, 85%, and 87%, respectively. Recall that 1 MW e = 3,413 Btu e and that 1 MW th = (1 MW e )/ η where the last ratio is also
called the plant heat rate. Next, assume that the biomass, coal, and natural gas plants
respectively reject their heat at 40 ° , 45 ° , and 50 ° C, and that you have invented a new
type of heat engine with the following characteristics: (1) it accepts input heat at the
temperature at which a power plant or other source rejects the heat; (2) it exploits that
heat to do some work and rejects waste heat at 10 ° C. Calculate the ideal Carnot thermal
efficiency of your engine for each of these three temperature cycles, i. E. , 40 – 10, 45 – 10,
and 50 – 10 ° C. Assuming 95% of the useful work of your engine can be converted to
electricity, calculate the maximum amount of additional electricity in kWh each of these
three plants could produce if they had your heat engine connected to their facility, i. E. ,
the amount producible at the Carnot efficiency of your engine
Answers
The maximum electricity produced are 9.585%, 11.0065% and 12.384%
How to solve for the electricity produced1. The Biomass
n = 30 percent
we have
1 - 0.3 / 0.3
= 2.333
For coal
n = 37%
1 - 37% / 37%
= 1.703
For natural gas
n = 55%
= 1 - 55% / 55%
= 0.818
The heat rejected
For Biomass
100 / 0.3
= 333.33
For coal
= 500 / 0.37
= 1,351.351
QS - W
= 1,351.351 - 500
= 851.351
for natural gas
= 250 / 0.55
= 454.545
454.545 - 200
= 204.545
Thermal efffieciency of Carnot heat engine
For Biomass
TL = 283
Th = 313
1-(283/313)
=0.096
= 9.585%
For coal
he = 1-(283/318)
=0.110
=11.0065%
C) Natural gas
he = 1-(283/323)
=0.124
=12.384%
Read more on electricity here https://brainly.com/question/776932
#SPJ4
What measurement is the usable area of conduit based on?
Answers
Select the correct answer. The most frequent maintenance task for a car is: A. Oil changes B. Tire replacements C. Coolant changes D. Brake replacements
Answers
Answer:
A. Oil changes
Explanation:
It depends on the car and its usage and environment. Usually oil is supposed to be changed every few months, more often if the car is driven a lot. Coolant changes may be indicated as seasons change, so will generally occur less frequently than oil changes.
Tire and brake replacement depend on usage and driving habits. Some owners may never have to replace either one, if they trade their car every year or two. Folks who drive with their foot on the brake pedal may have to replace brakes relatively often.
The most frequent task is generally oil changes.
Answer:
A. Oil changesthe most frequent maintenance task for a carWater enters and leaves the 6-cm diameter pipe bend in Fig. P3.45 at an average velocity of 8.5 m/s. The horizontal force to support the bend against momentum change is 300 N. Find (a) the angle ϕ; and (b) the vertical force on the bend.
Answers
Answer:
Water enters and leaves the 6-cm diameter pipe bend in Fig. P3.45 at an average velocity of 8.5 m/s. The horizontal force to support the bend against momentum change is 300 N. Find (a) the angle ϕ; and (b) the vertical force on the bend.
a) The angle \(\phi\) is 62.06°.
b) The vertical force on the bend is 180.47 N.
The weight of the water and the reaction force must be considered to determine the vertical force exerted on the bend. This analysis provides valuable insights into the behavior and structural requirements of the pipe bend in relation to the fluid flow, ensuring its proper functioning and structural integrity.
The objective is to determine two key parameters: the angle of deflection QQ of the pipe bend and the vertical force acting on it. By applying principles of fluid mechanics and equilibrium, the solution requires calculating the change in momentum of the water passing through the bend and equating it to the known horizontal force required to support the bend.
Given that,
The diameter (d)= 6 cm
The average velocity (v)=8.5 m/s
Consider the rate of change of momentum along the x-direction.
\(F_x=mass \times (\frac{Intial \ velocity-Final \ Velocity}{time})\)
\(F_x=m'[(V-(-Vcos\phi)]\)
\(F_x=\rho AV^2[1+cos\phi]\)
\(300=100\times(\frac{\pi}{4}(0.06)^2)\times(8.5)^2[(1+cos\phi)]\)
\([(1+cos\phi)]=1.4685\)
\(cos\phi=0.4685\)
\(\phi=cos^{-1}(0.4685)\)
\(\phi=62.06^{^\circ}\)
(b) Calculate the vertical force on the bend.
Consider the rate of change of momentum along the y-direction.
\(F_y=mass \times (\frac{Intial \ velocity-Final \ Velocity}{time})\)
\(F_y=m'[(0-(V-Vsin\phi)]\)
\(F_y=\rho AVsin\phi\)
\(F_y=(1000)\times(\frac{\pi}{4}(0.06)^2)\times(8.5)^2\times sin62.06^{\circ}\)
\(F_y=180.47 \ N\)
Therefore,
a) The angle \(\phi\) is 62.06°.
b) The vertical force on the bend is 180.47 N.
Learn more about the average velocity here:
https://brainly.com/question/27982972.
#SPJ3
an aerial photograph that has been processed to remove distortions due to orthographic effects or photo plane effects, such as the pitch and yaw of the aircraft is said to be
Answers
An orthophoto or orthophotograph is an aerial photograph that has been mathematically adjusted ("orthorectified") such that the scale is consistent; the image is devoid of distortion just like a map.
What distinguishes orthophoto from aerial photography?A straight pipeline can be seen in the aerial view, however it is deformed due to camera tilting and terrain relief (topography). The pipeline's real, straight path is shown by the orthophoto, which cancels out the effects of tilt and relief.
How do orthophoto and orthomosaic differ from one another?An orthophoto is a single image that has been corrected for distortions, but an orthomosaic is the result of stitching together all the orthophotos.
To know more about distortions visit :-
https://brainly.com/question/17404378
#SPJ1
Hey everyone!
This question is hard.
What specific fluid goes in the windshield wipers? (I never drove a car before)
And how much to put in fluid ounces? (So you don't blow a car up)
Answers
I’ve never driven either. But I’m pretty sure there is not really specific fluid you have to use. Just to name a few are Rain-X Bug Remover Windshield Washer Fluid, Prestone AS657 Deluxe 3-in-1 Windshield Washer Fluid.
For how much, there should be a little line or 3/4th of the way full.
Hope this helps!
Answer:
What specific fluid goes in the windshield wipers.
Distilled water
How much to put in fluid ounces?
There should be a tiny bit more than 3/4 of the way full.
What will be the output after the following code is executed?
import matplotlib.pyplot as plt
def main():
x_crd = [0, 1 , 2, 3, 4, 5]
y_crd = [2, 4, 5, 2]
plt.plot(x_crd, y_crd)
main()
Answers
get num num1, num2 () It is expected that the function get num() will return a result for both num1 and num2. A value drawn at random from a particular series of numbers is what the randrange function returns.
What will the code Round 4.576) produce?To round off a supplied decimal number to the desired number of decimal places, use the round function. The amount in this situation should be rounded to two decimal places. The result will be 4.57 as a result.
What does the next sentence mean?int (*fp)(char*) is a pointer to a pointer, a pointer to an array of characters, a pointer to a function that accepts a character string as an argument and returns an int, and a pointer to a function that does just that.
The correct response is "C"
To know more about randrange function visit:-
https://brainly.com/question/20606470
#SPJ4
5 Systems Modeling
es / SPE(2201 / General / Business System Modelling CAT
2. Business Process Modelling is important to a business due to the following advantages except:
(2 marks)
O a. None of the above
h
O b. Enhances Customization of Business Processes
O c Enhances Competitive advantage
O d. Enhances Process Communication
age
Next pag
Answers
Answer: None of the above
Explanation:
Business process modeling refers to the graphical representation of the business processes of a company, which is vital in the identification of potential improvements.
Business pticess modelling can be done through graphing methods, like data-flow diagram, flowchart etc. It is vital as business managers can effectively and quickly communicate their ideas.
It also enhances the customization of business processes, enhances the competitive advantage and enhances the process communication as well.
Therefore, the answer to the question will be "None of the above".
Describe how to contribute to
zero/low carbon work outcomes
within the built environment.
Answers
Answer:
day if you workout without Zero billing that means you're not sweating. Sweating you're not losing anything that means you have zero outcomes
Explanation: