if adp was the limiting reagent, what should have happened when the uncoupler, 2,4-dinotrophenol was added? what was observed?

To compute the number of formula units in 5.50 grams of AgNO3, first calculate the molar mass of the compound, which is the sum of the atomic masses of silver (Ag), nitrogen (N), and oxygen.

(O). Molar mass of AgNO3 = (1 x Ag atomic mass) + (1 x N atomic mass) + (3 x O atomic mass) The molar mass of AgNO3 is equal to (1 x 107.87 g/mol) + (1 x 14.01 g/mol) + (3 x 16.00 g/mol). The molar mass of AgNO3 is 169.87 g/mol. Therefore, using the molar mass, we can convert the mass of AgNO3 to moles of AgNO3: moles AgNO3 = AgNO3 mass / AgNO3 molar mass moles AgNO3 = 5.50 g / 169.87 g/mol moles AgNO3 = 0.0324 mol Lastly, we may employ Avogadro's number, 6.022 x To convert moles of AgNO3 to formula units, multiply by 1023: formula units = moles AgNO3 x Avogadro's number formula units = 0.0324 mol x 6.022 x 1023 formula units/mol formula units = 1.95 x 1022 formula units/mol formula units = 1.95 x 1022 formula units As a result, 5.50 grams of AgNO3 contains roughly 1.95 x 1022 formula units.

learn more about  AgNO3  here:

https://brainly.com/question/22263346

#SPJ4

Answer:

Lithium

Pro.=3

Neu. =4

Elec.= 3

Mass = 6.941

Explanation:

One treatment method for acute iron toxicity is the administration of chelating agents.

Chelating agents are substances that bind to the excess iron in the body, forming stable complexes that can be excreted through urine or feces. One commonly used chelating agent for iron toxicity is deferoxamine.

It forms a complex with iron, allowing it to be eliminated from the body.

Additionally, in severe cases, supportive care may be provided, including the administration of fluids, oxygen therapy, and treatment for symptoms such as vomiting or diarrhea.

It is essential to seek immediate medical attention in cases of iron toxicity to receive appropriate treatment and prevent further complications.

Learn more about toxicity from the given link

https://brainly.com/question/30498848

#SPJ11  

Answer:

Oxygen

Explanation:

Oxygen has 6 valence electrons and it wants to have 8 to obtain a stable octet. So Oxygen gains two electrons in the bond, developing an anion.

It is also a non-metal, and they tend to gain anions.

Any species that contain negative charge over it called anion. Out of Lithium, oxygen, strontium and calcium, oxygen is the only element that can form anion. So option D is correct option.

Non metals are the element that have property to gain electron. When any element gain electron then element attain negative charge and that element is called anion. Non metals lie on the right side of the periodic table. Non metals have high electronegativity that is why they have the ability to attract the electron efficiently.

In our question strontium, calcium and lithium belongs to metals category and these lie on the left side of the periodic table. Metals are meant to release electron and hence become cation.

Thus the only element that is non metal here is Oxygen that forms anion. Its oxidation state is -2. Thus option b is correct option

To learn more about non metals, here:

https://brainly.com/question/28650063

#SPJ5

It is possible to predict the absorbance of a 214 mm solution of nickel(ii) chloride.

The calibration curve  is a plot of absorbance against concentration for various standard solutions of the analytes.

The slope of the graph is 0.25 and the y intercept is zero. Now A = ecl

c= A/el

c = 0.66/0.25 × 1

c= 2.64

It is possible to predict the absorbance of a 214 mm solution of nickel(ii) chloride by the use of the regression line from the calibration curve because the same instrument is used for the measurement of the new compound.

Learn more about calibration curve:https://brainly.com/question/15061774

#SPJ1

Answer:

CO₃²¯(aq) + 2H⁺(aq —> H₂O(l) + CO₂(g)

Explanation:

The net ionic equation for sodium carbonate (Na₂CO₃) and sulfuric acid (H₂SO₄) can be obtained as follow:

Na₂CO₃ + H₂SO₄ —>

In solution, Na₂CO₃ and H₂SO₄ will dissociate as follow:

Na₂CO₃(aq) —> 2Na⁺(aq) + CO₃²¯(aq)

H₂SO₄(aq) —> 2H⁺(aq) + SO₄²¯(aq)

Na₂CO₃(aq) + H₂SO₄(aq) —>

2Na⁺(aq) + CO₃²¯(aq) + 2H⁺(aq) + SO₄²¯(aq) —> 2Na⁺(aq) + SO₄²¯(aq) + H₂O(l) + CO₂(g)

Cancel out the spectator ions (i.e Na⁺ and SO₄²¯) to obtain the net ionic equation.

CO₃²¯(aq) + 2H⁺(aq —> H₂O(l) + CO₂(g)

Answer:

The radiation of the Sun's electromagnetic waves

Explanation:

Earth's atmosphere keeps much of the Sun's energy from escaping into space. This process, called the greenhouse effect, keeps the planet warm enough for life to exist.

Ammonium acetate, or NH4C2H3O2, has a molar mass and molecular weight of 77.082.

To learn more about Ammonium acetate refer to:

https://brainly.com/question/29570260

#SPJ1

Approximately 52.55 grams of Br2 are required to react completely with 29.2 grams of AlCl3.

To determine the amount of Br2 required to react completely with 29.2 grams of AlCl3, we need to use stoichiometry.

First, let's convert the given mass of AlCl3 to moles. We can do this by dividing the mass by the molar mass of AlCl3, which is 133.34 g/mol.

29.2 g AlCl3 / 133.34 g/mol = 0.219 moles AlCl3

Now, using the balanced equation: 2AlCl3 + 3Br2 → 2AlBr3 + 3Cl2, we can determine the mole ratio between AlCl3 and Br2.

From the equation, we can see that for every 2 moles of AlCl3, we need 3 moles of Br2.

Therefore, we can set up a proportion:

0.219 moles AlCl3 / 2 moles AlCl3 = x moles Br2 / 3 moles Br2

Cross-multiplying and solving for x, we get:

x = (0.219 moles AlCl3 * 3 moles Br2) / 2 moles AlCl3
x = 0.3285 moles Br2

Finally, to convert moles of Br2 to grams, we multiply by the molar mass of Br2, which is 159.808 g/mol.

0.3285 moles Br2 * 159.808 g/mol = 52.55 grams Br2

Therefore, approximately 52.55 grams of Br2 are required to react completely with 29.2 grams of AlCl3.

Learn more about grams here:-

https://brainly.com/question/30426054

#SPJ11

Answer:

NiC2N2

Explanation:

Yes, the elements that will be formed in a fusion reaction can be predicted by looking at the combining nuclides.

A nuclear reaction is one in which the nucleus of elements undergo rearrangement to form new nuclei and release energy.

Mass and charge of reactant and product nuclides are conserved in a nuclear reaction.

This implies that we can look at the reactant nuclides and predict the products of the nuclear fusion . This can be done by studying the combining nuclides and taking into cognizance, the balance of mass and charge on both sides of the nuclear reaction equation.

Learn more: https://brainly.com/question/13440572

Answer: Yes it is possible

Explanation: The element that is formed in a fusion can be predicted by looking at the combining elements or nuclides in this case it would be the hydrogen isotopes

Answer:

The elements of groups 13, 14, 15, 16, 17, 18 are called p block elements.examples: boron (B), aluminium (Al), gallium (Ga), indium (In), thallium (Tl),and so on

Explanation:

The ground-state electron configurations of oxygen, sulfur, and selenium are 2-8-8, 2-8-6, and 2-8-8-6 respectively. Oxygen and selenium both have 8 electrons in their outermost shell, while sulfur has 6.

This difference affects the chemical and physical properties of these elements, as elements with more electrons in their outermost shells tend to be more reactive due to increased electron availability for bonding.

As oxygen and selenium have the same number of electrons in their outermost shell, they have similar chemical and physical properties. Sulfur, with its fewer outer shell electrons, has different chemical and physical properties than oxygen and selenium.

For more question on selenium click on

https://brainly.com/question/30094538

#SPJ11

The term best describes the flow of electrons and protons from one place to another is the electric current.

The electric current is describes as the flow of the electrons from the one place to the another place. The flow of the electrons in the wire or in the solution. The electricity defined the direction of the flow of the electrons. The direction of the movement of the electrons between the atoms is called as the electric current.

The unit of the electric current is the ampere. There are the two kinds of the electric current is direct current and the alternating current.

To learn more about electrons here

https://brainly.com/question/3174055

#SPJ4

The purpose of the lower air dam in the front of a vehicle is to improve aerodynamics and increase fuel efficiency. The air dam, also known as a front spoiler or splitter, is typically a protruding lip or panel located at the bottom of the front bumper.

When the vehicle is in motion, the air dam helps to redirect the airflow underneath the vehicle. It creates a smoother flow of air, reducing turbulence and minimizing drag. By reducing aerodynamic drag, the vehicle experiences less resistance, allowing it to move more efficiently through the air.

The improved aerodynamics provided by the lower air dam can result in reduced fuel consumption, as the engine does not have to work as hard to overcome air resistance. This makes the vehicle more fuel-efficient and can contribute to better overall performance.

 To learn more about vehicle click here:brainly.com/question/31843052

#SPJ11

Because the cuvette's walls can vary in breadth, this is the case. If you don't enter it exactly the same way each time, it will change how much light passes through the sample and will have an impact on your results.

The cuvette has a line that must line up with the sample holder's line because of this. hence, readings had no impact.

The cuvette's route length in the spectrophotometer should always stay the same.

This is because the radiation should have a constant path length as it goes through the sample inside the cuvette. By doing this, the cuvette through which the light will travel won't get scratched.

Scratches on the cuvette will result in inaccurate measurements of the concentration or absorbance that is being assessed, producing inaccurate findings.

Therefore, the line on the cuvette is always aligned with that of the sample holder in order to establish a uniform path length and obtain accurate findings.

learn more about  cuvette here:

https://brainly.com/question/29385690

#SPJ4

Answer:The amount of barium deposited can be calculated using Faraday's law of electrolysis:

moles of barium deposited = (charge passed) / (Faraday's constant)

mass of barium deposited = (moles of barium deposited) x (molar mass of barium)

The Faraday's constant is the charge per mole of electrons and is equal to 96,485 C/mol.

Given that 198 C pass through the molten barium salt, we can calculate the moles of barium deposited as:

moles of barium deposited = (198 C) / (96,485 C/mol) = 0.002052 mol

The molar mass of barium is 137.33 g/mol. Therefore, the mass of barium deposited is:

mass of barium deposited = (0.002052 mol) x (137.33 g/mol) = 0.282 g

Thus, 0.282 grams of barium are deposited.

learn more about Faraday's constant

https://brainly.com/question/29290837?referrer=searchResults

#SPJ11

Answer:

Answer is: mass.

Explanation:

hope this helps!

Answer:examples for neutralization - treating indigestion,treatment for insect bites.hope it help you

Explanation:

A battery is a device that converts chemical energy into electrical energy through a process known as an electrochemical reaction.

When a battery is connected to a circuit, the electrochemical reaction causes a flow of electrons from the anode to the cathode, generating an electric current that can power a device.

The metal chosen for the anode must be capable of losing electrons easily, while the metal chosen for the cathode must be capable of accepting electrons. The choice of metals can also affect the voltage and capacity of the battery, as well as its overall efficiency.

In general, the metals used in a battery should have a large difference in their electronegativity values, which determines how easily an atom can attract electrons. Common metals used in batteries include zinc, lithium, nickel, and cadmium.

Find out more on batteries at https://brainly.com/question/16553902

#SPJ1

ACID (Atomicity, Consistency, Isolation, Durability) is a set of properties that ensure reliable data transactions in a database management system.

ACID transactions are essential for ensuring the reliability of data in a database management system and are particularly important for mission-critical applications where data integrity is a top priority.

Learn more about ACID transactions here:

https://brainly.com/question/16765337

#SPJ4

Answer:

2

Explanation:

Pb(NO3)2 + 2NaI 2NaNO3 + PbI2

To see the coefficients of NaI in the given reaction we need to balance the reaction first. The coefficient for Nal once the equation is balanced is 2. the correct option is option B.

Balanced equation is the one where the number of atoms of each species is same on reactant and product side. In balanced equation mass can neither be created nor be destroyed.

The unbalanced equation is

\(\rm Pb(NO_{3})_{2}+ Nal\rightarrow NaNO_{3} + PbI_{2}\)

The atoms of Pb on reactant and product side is 1 so Pb is balanced.

The atoms of N is 2 on reactant and 1 on product side so balance it as

\(\rm Pb(NO_{3})_{2}+ Nal\rightarrow 2 NaNO_{3} + PbI_{2}\)

The atoms of O is 6 on reactant and 6 on product side so it is balanced

The atoms of I is 1 on reactant and 2 on product side so balance it as

\(\rm Pb(NO_{3})_{2}+2 Nal\rightarrow 2NaNO_{3} + PbI_{2}\)

The atoms of Na on reactant and product side is 2 so Na is balanced.

Now all the elements are balanced

Therefore, the coefficient for Nal once the equation is balanced is 2. the correct option is option B.

Learn more about the balanced equations, here:

https://brainly.com/question/7181548

#SPJ2

The sample prepared by dissolving 10.0 grams of NaCl in 1.0 liter of H₂O is a homogeneous mixture, which is described by option (2).

A homogeneous mixture is a mixture that has a uniform composition and properties throughout the sample. In this case, the NaCl molecules have been completely dissolved in the water molecules, resulting in a clear, colorless solution.

The NaCl and water molecules are distributed evenly throughout the sample, and the composition and properties of the solution are uniform in all parts of the sample. As a result, the sample is a homogeneous mixture.

Option (1) cannot be correct because NaCl and H₂O are two distinct compounds that have different properties and characteristics. Therefore, they cannot form a single homogeneous compound.

Option (3) cannot be correct because a compound is a substance composed of two or more different elements that are chemically combined in a fixed ratio. NaCl is a compound, but H₂O is also a compound, and they cannot chemically combine to form a heterogeneous compound.

Option (4) cannot be correct because a heterogeneous mixture is a mixture that is not uniform in composition and properties throughout the sample. This is not the case for the NaCl and H₂O solution, which is a homogeneous mixture.

To learn more about NaCl refer to:

brainly.com/question/1550455

#SPJ4

The mass of the sample of calcium carbonate when it absorbs 45. 5 J of heat is option B: 5.0 grams.

This is a heat transfer problem The general formula for heat transfer or heat change (as in absorption) is as follows:

Q = m x c x  ΔT

where:

Q = heat absorbed,

m = mass of the substance,

c = specific heat, and

ΔT = change in temperature.

We are already given:

Q = 45.5 J

ΔT is the difference between 28.5 °C and 21.1 °C:

28.5 °C - 21.1 °C = 7.4 °C

c = 0.82 J/g-K

We need to find the mass of the sample or the substance:

m = Q/ c x ΔT

= 45.5 / 0.82 x 7.4

= 5.0 grams

To know more about heat transfer, refer:

https://brainly.com/question/25898569

#SPJ4

Explanation:

1. option a

2...option d

CTAB (Cetyltrimethylammonium bromide) plays a vital role in the preparation of CdS nanoparticles. Without CTAB, the synthesis process would be disrupted, leading to uncontrolled growth and aggregation.

CTAB is an essential component in the preparation of CdS nanoparticles through the colloidal synthesis method. It serves multiple important functions in the reaction. Firstly, CTAB acts as a capping agent, which means it binds to the surface of the nanoparticles, preventing uncontrolled particle growth and agglomeration.

CTAB acts as a stabilizer by providing electrostatic repulsion between the nanoparticles. It forms a protective layer around the particles, preventing them from coming into close contact and aggregating. This stability is crucial for maintaining the colloidal nature of the CdS nanoparticles and preventing their precipitation or settling.

If CTAB were not added during the synthesis, several issues would arise. Without CTAB, the nanoparticles would undergo uncontrolled growth, resulting in a wide range of sizes and shapes. Additionally, the absence of a stabilizing agent would cause the nanoparticles to aggregate and form larger clusters, diminishing their individual properties. The lack of size and shape control, as well as the presence of aggregates, would hinder the desired characteristics and applications of the CdS nanoparticles.

Learn more about nanoparticles here:

https://brainly.com/question/32837317

#SPJ11

The effect or process responsible for the higher temperatures that occur in urban areas is the Heat island effect. The correct option is 1.

Urbanized areas known as heat islands have greater temperatures than nearby rural areas. More than natural landscapes like trees and water bodies, structures like roads, buildings, and other infrastructure reflect and absorb solar heat.

The heat island effect is the reason for high temperatures that happen in urban areas.

Thus, the correct option is 1. Heat island effect.

To learn more about the Heat island effect, refer to the below link:

https://brainly.com/question/12736062

#SPJ1

The question is incomplete. Your most probably complete question is given below:

The oxidation number of an element in a compound changes when the compound undergoes oxidation or reduction.

In oxidation, the oxidation number of the element increases, meaning it loses electrons. This happens because the compound loses electrons to another substance. In reduction, the oxidation number of the element decreases, meaning it gains electrons. This happens because the compound gains electrons from another substance. Therefore, the change in the oxidation number of an element in a compound indicates whether the compound is being oxidized or reduced.
When a compound is oxidized, the oxidation number of one of its elements increases, meaning it loses electrons during the reaction. On the other hand, when a compound is reduced, the oxidation number of one of its elements decreases, indicating that it gains electrons during the reaction. In summary, oxidation involves an increase in the oxidation number due to electron loss, while reduction involves a decrease in the oxidation number due to electron gain. These processes often occur simultaneously in redox reactions, where one species is oxidized and another is reduced.

To know more about redox reactions, visit:

https://brainly.com/question/13293425

#SPJ11