The frequency of an oscillator (f) is inversely proportional to the square root of the mass (m) attached to it. Mathematically, it can be represented as:
f ∝ 1/√m
This means that if you double the mass of the block attached to a spring-block oscillator, the frequency of the oscillation will decrease by a factor of √2, which is approximately 1.4. In other words, the oscillation will become slower and have a longer period. This relationship can be understood by considering that increasing the mass will increase the inertia of the system, making it harder for the spring to push and pull the mass back and forth at the same rate. Therefore, the frequency of the oscillation decreases as the mass increases.
To know more about mass please visit:
https://brainly.com/question/19694949
#SPJ11
jordan has a mass of 65kg and carlos has a mass of 78.0kg. jordan is running at 5.75m/s when he is tackled by carlos who is running in the opposite direction. after the collision of both players are at rest. calculate their velocity before the collision.
Given
mj = 65 kg
mc = 78 kg
voj = 5.75 m/s
after collision
vfj = vfc = 0 m/s
Procedure
The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.
\(\begin{gathered} p_o=p_f \\ m_jv_{0j}-m_cv_{0c}=0 \\ m_jv_{0j}=m_cv_{0c} \\ v_{0c}=\frac{m_jv_{0j}}{m_c} \\ v_{0c}=\frac{65kg*5.75m/s}{78kg} \\ v_{Oc}=4.8m/s \end{gathered}\)
The velocity before the collision would be 4.8m/s
Check photo for 6 mark question.
The electric bicycle is more energy saving than the ordinary bicycle.
What is the comparison?We would have to look at the information that have been furnished in the table so as to accurately make the comparison that we are being required to make in the case of this problem.
We can see that there is less utilization of energy in the electric bicycle and more power is generated. This causes the rider to do less work and the electric bicycle would still cover the required distance in a shorter time than the ordinary bicycle.
Learn more about bicycle:https://brainly.com/question/10466695
#SPJ1
A swimmer is capable of swimming 1. 8 m/s in still water. If she swims directly across a 200 m wide river whose current is 0. 80 m/s, how far downstream will she land?
As per the given question, the swimmer will land 88.88m far downstream
Total distance covered = 1.8m/s
Length = 200m
The current of the river = 0.80 m/s
It is referred to downstream if a boar or swimmer moves in the same direction as the stream. When a boat's or a swimmer's speed is mentioned, it typically refers to the speed in still water.
Calculating the time taken to cross the river -
= Total length covered / total distance covered
= 200/ 1.8
= 111.1
Calculating the total drift of the swimmer -
= Total current of the river x time taken
= 0.80 x 111.1
= 88.88
Read more about downstream on:
https://brainly.com/question/22253892
#SPJ4
A massive light hangs over the table in Jeremy's dining room. The light is supported by four strong chains which make an angle of 72° with the horizontal. The force in each chain is 36.4 N. Determine the mass of the light in kilograms (kg). Use the approximation g ≈ 10 m/s^2.
Given
A massive light hangs over the table in Jeremy's dining room. The light is supported by four strong chains which make an angle of 72° with the horizontal.
The force in each chain is F=36.4 N.
To find
The mass of the light in kg
Explanation
Let the mass of the light be m
The weight of the light acts downwards.
To balance thisi force the force on the string vertically upward is considered
In equillibrium
\(\begin{gathered} mg=4Fsin72^o \\ \Rightarrow10m=4\times36.4\times sin72^o \\ \Rightarrow m=13.84\text{ kg} \end{gathered}\)Conclusion
The mass of the light is 13.84 kg
Calculate the energy transferred by an appliance using mains electricity (230v) if the charge is 150c. Give your answer in kilojoules.
The energy transferred by an appliance using mains electricity is 34500 Joule.
What is energy?
In physics, energy is the ability to perform work. It could exist in several different forms, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc. Additionally, there is heat and work, which is energy being transferred from one body to another. Energy is always assigned based on its nature once it has been transmitted.
Given that: charge of the particle: Q = 150 C.
Potential difference applied: V = 230 V.
Hence, the potential energy of the particle: E = QV
= 150 × 230 Joule
= 34500 Joule.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ1
what is the total pressure experienced by an object submerged 10m below the surface of water, if the water and the object are held in a container where the air pressure above the water is 3 atm?
The total pressure experienced by submerged object is 428000 Pa.
We need to know about the pressure to solve this problem. Pressure is a unit that describes how much force is applied to a surface area. It can be determined as
P = F / A
where P is pressure, F is force and A is area.
The pressure below the surface water can be defined as hydrostatic pressure. The hydrostatic pressure depends on the density of the fluid, gravitational acceleration, and depth. It can be determined as
P = Po + ρ . g . h
where P is total pressure, Po is the pressure above the fluid, ρ is the density of fluids, g is the gravitational acceleration (9.8 m/s²) and h is the depth from the surface.
From the question above, we know that
Po = 3 atm = 3.03 x 10⁵ Pa
h = 10 m
ρ water = 1000 kg/m³
Find the pressure
P = Po + ρ . g . h
P = 3.03 x 10⁵ + 1000 . 9.8 . 10
P = 3.03 x 10⁵ + 98000
P = 428000 Pa
Find more on pressure at: https://brainly.com/question/25965960
#SPJ4
Based on the tug of war pictured below, what is the net force? –190 n 10 n –10 n 190 n
The net force in the tug of war which is shown in the picture provided will be 0N.
What is a Force?This is defined as the power exerted on a body and the unit of Force is referred to as Newton.
In the tug of war, the net force is gotten by summing up all the forces.
–190N + 10N –10N + 190N = 0N.
Therefore the net force is 0N.
Read more about Force here https://brainly.com/question/12970081
#SPJ4
Answer:
B. 10 N
Explanation:
EGDE 2022
i’ll give brainliest!! please help and answer correctly! plsss answer quick
Answer: The motion of the object will remain the same
Explanation:
2. 3000. kg car is moving across level ground at 5.0 m/s when it begins an
acceleration that ends with the car moving at 15.0 m/s. Is work done in this
situation? How do you know?
Answer:
yes
Explanation: Work is done when there is movement. Therefore it was work was being done.
Students perform an investigation using density to determine what kind of wood an oval-shaped block is made of.
One student attaches a lead cube to an oval-shaped piece of wood and submerges them in water, as shown in the
diagram. The lead cube keeps the wood from floating. When the wood is underwater, the water level reads 47
milliliters.
A student ties a lead cube to an oval-shaped block to prevent it from floating and immerses it in water density as part of a study to identify the sort of wood it is composed of.
What is the name of density?The term "density" (also known as "volumetric mass density" or "specific mass") refers to a substance's mass per unit of volume. Although the Latin letter D may also be used, the sign most frequently used for density is (the lower case Greek letter rho).
Who discovered density?According to legend, Archimedes shouted "Eureka!" as he rushed through the Sicilian streets. ("I've discovered it!") He had figured out what density was. Everyone has spent a significant amount of time in water during their life. The second thing Archimedes noticed was that he felt lighter floating.
To know more about density visit:
https://brainly.com/question/15164682
#SPJ1
How did people studying lunar eclipses learn that Earth is round?
(A) They observed Earth's shadow on the moon.
(B) They observed the moon's shadow on Earth.
(C)
(D)
They observed that lunar eclipses can last for hours.
They observed that solar eclipses are shorter than lunar eclipses.
Answer:
Scientists have studied eclipses since ancient times. Aristotle observed that the Earth's shadow has a circular shape as it moves across the moon. He posited that this must mean the Earth was round. Another Greek astronomer named Aristarchus used a lunar eclipse to estimate the distance of the Moon and Sun from Earth
calculate the magnitude of distance and displacement of a body moving in a complete circle
Answer:
Total distance = 2πr
Total displacement = 0
Explanation:
To Calculate the magnitude of distance and displacement of a body moving in a complete circle, we must come to these facts that:
The distance = circumference of the circle which is equal to the product of 2 ,pi and radius r
That is
Circumference = 2πr
Since velocity is changing and not constant, it is a vector quantity. Likewise displacement is a vector quantity.
The total displacement will be equal to zero.
Therefore, total distance is equal to the circumference of a circle while total displacement is equal to zero.
The symbol “g” can be used to refer to the acceleration due to gravity. “g” can also have another unit. Which of these is also a unit of “g”?
A- J/kg
B- J/kg2
C- N/kg
D- N/kg2
The symbol “g” can be used to refer to the acceleration due to gravity. “g” can also have another unit. N/kg, is the another unit used to represent "g".
The correct answer is option C.
The unit of "g" that is also used to represent another unit is option C, N/kg. In physics, the symbol "g" is commonly used to represent the acceleration due to gravity, which is approximately 9.8 m/s² on the surface of the Earth. This means that every kilogram of mass experiences a force of 9.8 Newtons when subjected to Earth's gravitational field.
The unit N/kg represents the Newton per kilogram, which is the unit of gravitational field strength or gravitational acceleration. This unit describes the force experienced by a mass per unit mass. In other words, it represents the gravitational force acting on each kilogram of mass.
To understand this concept, let's consider the formula for gravitational force:
F = m * g
where F is the force, m is the mass, and g is the gravitational acceleration. In this equation, the unit of force is Newtons (N), and the unit of mass is kilograms (kg). Therefore, to have consistent units, the gravitational acceleration "g" must have the unit N/kg.
Option A, J/kg, represents the unit of energy per unit mass, which is the joule per kilogram. Option B, J/kg², represents the unit of energy per unit mass squared, which is not directly related to the gravitational acceleration. Option D, N/kg², represents the unit of force per unit mass squared, which is also not directly related to the gravitational acceleration.
For more such information on: acceleration
https://brainly.com/question/460763
#SPJ8
a 100 kg man is one fourth of the way up a 4.0 m ladder that is resting against a smooth, frictionless wall. the ladder has mass 25 kg and makes an angle of 56 degrees with the ground. what is the magnitude of the force of the wall on the ladder at the point of contact, if this force acts perpendicular to the wall and points away from the wall? (hint: use the point of contact of ladder with the floor as your axis of rotation.)
The magnitude of the force of the wall on the ladder at the point of contact is 248 N.
What forces are at work when a ladder is up against a wall?The wall is being leaned on by a ladder. The frictional force and the normal force of the floor on the ladder are both at work at the base of the ladder. Due to the wall, there is a normal force at the top of the ladder. The center of the ladder is experiencing the effects of gravity.
What force acts on the ladder with the same intensity as the usual force of the wall?For equilibrium, there must be a horizontal force operating someplace on the ladder that calls for an opposite normal reaction force on the wall. Friction at the ladder's base is the force acting horizontally on the ladder.
Given:
Mass \((M) = 100 kg\)
Ladder length \((l)= 4.0 m\)
Mass of ladder \((m)= 25kg\)
Angle \(\theta=56^o\)
The equation for the co-planner force is,
\(mgcos56*2+Mgcos56*1-N_fsin56*4=0\)
\(N_f=248N\)
To know more about frictional force visit:
https://brainly.com/question/23161460
#SPJ4
is my answer correct plz explain i don't understand it.
Answer:
yes that is correct
Explanation:
Which are the four fundamental mechanisms of evolution? Mutation, founder effect, genetic drift, and adaptation Mutation, gene flow, migration, and selection Mutation, genetic drift, selection, and gene flow
Answer:
C. Mutation, genetic drift, selection, and gene flow
Explanation:
Mutation: Mutations are random changes in the DNA sequence of an organism's genes. They introduce genetic variations into populations, which can be inherited by future generations and contribute to evolutionary change.
Genetic drift: Genetic drift refers to the random fluctuations in allele frequencies within a population due to chance events. It can have a significant impact on small populations and can lead to the loss or fixation of certain alleles over time.
Selection: Natural selection is the process by which certain heritable traits become more or less common in a population based on their effect on survival and reproduction. Traits that provide advantages for survival and reproductive success are more likely to be passed on to future generations.
Gene flow: Gene flow refers to the movement of genes from one population to another through the migration of individuals. It introduces new genetic material into a population and can result in the exchange of genetic variations, influencing the overall genetic diversity of populations.
one paint bucket weighing 40.0n is hanging by a massless cord from another paint bucket also weighing 40.0 n. the two are being pulled upward with an acceleration of 1.50 m/s^2 by a massless cord attached to an upper bucket. calculate the tension in each cord
The tension in each cord would be
T1=92.24N
T2=46.12N
Solution
40N = mg
m = 4.08kg
Coupled System
∑F = Ma
F=ma, which stands for Newton's second law, states that a force acting on an object is equal to that object's mass times its acceleration (a). This implies that the force required to accelerate an item increases with its mass. Additionally, the acceleration of an item increases with increasing force.
T1 - Mg = Ma
T1 - 80 = (4.08 + 4.08)(1.5)
T1 = 92.24N
T1- T2-Mₐg=mₐ a
92.24-T2-40=4.08(15)
T2 = 46.12 N
T2- Mᵇ g = mᵇa
T2 - 40 = 4.08(1.5)
T2 = 46.12N
Therefore the tension in each cord would be
T1=92.24N
T2=46.12N
To learn more about tension
https://brainly.com/question/24994188
#SPJ4
Need helpppp
10 N
10 N
Net Force:
Is it balanced or unbalanced?
net force 20
it's balanced because they are both of the same magnitude
What type of light on the electromagnetic spectrum has the highest energy per photon?.
Answer:
Gamma rays have the highest energies
Explanation:
please make my answer as brainelist
Do you believe that there should be no age limit in ballroom dancing?
Answer:
There should be a certain age limit Idon't know
Explanation:
find the position,size,and nature of the image formed by a spherical mirror from the folllowing data.
f= -12cm
u= -36
h= 2cm
The position of the image is 35 cm from the concave mirror, the size of the image is approximately 1.944 cm, and the nature of the image is upright.
To determine the position, size, and nature of the image formed by a spherical mirror, we can use the mirror formula:
1/f = 1/v - 1/u
where:
f is the focal length of the mirror,
u is the object distance (distance of the object from the mirror),
v is the image distance (distance of the image from the mirror).
Given data:
f = -12 cm (negative sign indicates a concave mirror)
u = -36 cm (negative sign indicates that the object is located on the same side as the incident light)
h = 2 cm (height of the object)
Substituting the values into the mirror formula, we have:
1/-12 = 1/v - 1/-36
Simplifying the equation:
-1/12 = (36 - v)/36
-1/12 = (36 - v)/36
-1 = 36 - v
v = 36 - 1
v = 35 cm
The positive value for v indicates that the image is formed on the opposite side of the mirror from the object.
To find the size of the image, we can use the magnification formula:
magnification (m) = -v/u
Substituting the values:
m = -35/-36
m ≈ 0.972
Since the magnification is positive, it indicates an upright image.
The size of the image can be determined using the magnification formula:
m = image height (h')/object height (h)
0.972 = h'/2
h' ≈ 1.944 cm
For such more questions on image
https://brainly.com/question/3457214
#SPJ8
The wind exerts a force of 500N, South on a sailboat, while the water exerts a force of100N East on the sailboat.
Answer:
Net force = 509.90 N
Explanation:
Given that,
Force exerted by wind is 500 N South on a sailboat.
The force exerted by water is 100 N on the sailboat.
Two forces are acting at an angle of 90 degrees. We can find the net force acting on the sailboat. Let it is F.
\(F=\sqrt{500^2+100^2} \\\\=509.90\ N\)
So, the net force on the sailboat is 509.90 N.
A given mass of gas has a pressure of 80N/m² at a temperature of 40°C. if the temperature is reduced to 27°C with the volume remaining constant, the new pressure is A. 46.ON/m² B. 75.ON/m² C. 80.0N/m² D. 85.0N/m²
Answer:
Correct Answer: Option B
Explanation:
Explanation
P1/T1 = P2/T2
80/(273+47) = P1/(273+27) = 75Nm-2
Answer: 75.0 Nm^-2
Explanation:
P1/T1 = P2/T2 80/(273+47) = P1/(273+27) = 75Nm-2
what is the wavelength of a wave that has a speed of 350 Meters/second and a frequency of 140 hertz?
____ meters
Answer:
\( \lambda = 2.5 \: m\)Explanation:
To find:-
The wavelength of the wave.Answer:-
We are here given that , the speed of a wave is 350m/s and has a frequency of 140Hz . We are interested in finding out the wavelength of the wavelength of the wave .
As we know that, wavelength, frequency and speed are related to each other as ,
\(\longrightarrow\boxed{ v = \lambda \nu} \\\)
where,
\(v\) is the speed of the wave.\(\lambda\) is the wavelength of the wave.\(\nu\) is the frequency of the wave.On substituting the respective values, we have;
\(\longrightarrow 350 m/s = \lambda \times 140Hz \\\)
\(\longrightarrow \lambda =\dfrac{350}{140} m \\\)
\(\longrightarrow \boxed{\boldsymbol \lambda = 2.5 \ m} \\\)
Hence the wavelength of the wave is 2.5 m .
Answer:
2.5meter
Explanation:
edge 2023
What happens when the falling object reaches its terminal velocity? It will stop _________
and fall at a constant rate of _____________. Terminal velocity means an object is no longer in free fall and travels at a constant rate of _______________.
fill in the blanks and I will give you brianestest!(Can't spell)PLZZZZ
!
Answer:
LOL i don't even know
Explanation:
What is the action and reaction if a person takes a step back
Answer:
action is backward and i guess reaction is sad
Free fall acceleration 9.8m/s2 means that when sn object falls down
Free fall acceleration 9.8 m/s² means that when an object falls down due to gravity, its velocity increases by 9.8 m/s every second.
What is free fall?Free fall refers to the motion of an object due to the attractive force of the earth known as gravity only acting on the object.
When an object is experiencing free fall, the object experiences acceleration due to gravity which has a constant value of 9.8 m/s².
This constant varies at several points on the earth's surface. The farther away an object is from the earth's surface, the lower the value of the free fall acceleration or acceleration due to gravity will be.
Learn more about free fall at: https://brainly.com/question/12167131
#SPJ1
Can someone help me out??? I need this done ASAP TYSM!!
Answer:
Answer is D
Explanation:
By changing the direction of the current moving through the wire will change polarity of the magnet but it will not affect the strength of the magnet.
A low-luminosity star has a small and narrow ________, whereas a high-luminosity star has a large and wide one.
A low-luminosity star has a small and narrow habitable zone, whereas a high-luminosity star has a large and wide one.
What is luminosity of a star?The radiant power emitted by a light-emitting item over time is measured as luminosity, which is an absolute measure of radiated electromagnetic power (light).
The total quantity of electromagnetic energy released per unit of time by a star, galaxy, or other celestial object is referred to as luminosity in astronomy.
Learn more about low-luminosity star:
https://brainly.com/question/13912549
#SPJ4
At which of the following points does a roller coaster have the most potential energy? As it is going down a hill. At the top of the hill. As it is climbing a hill. At the bottom of the hill.
Answer:
At the top of the hill.
Explanation:
As the roller coaster goes up the hill, kinetic energy (K.E) decreases, gravitational potential energy (G.P.E) increases .
As it reach the top of the hill, K.E becomes zero and G.P.E reaches maximum .
As it goes down the hill, K.E starts to increase and G.P.E decrease .
At the bottom of the hill, K.E reaches maximum and G.P.E becomes zero .
(Correct me it I am wrong)
At the top of the hill.
The following information should be considered:
In the case when the roller coaster goes up the hill, kinetic energy (K.E) decreases, gravitational potential energy (G.P.E) increases . When it reach the top of the hill, K.E becomes zero and G.P.E reaches maximum . When it goes down the hill, K.E starts to increase and G.P.E decrease . When it is the bottom of the hill, K.E reaches maximum and G.P.E becomes zero.Learn more: https://brainly.com/question/1605083?referrer=searchResults