Match each wireless term or concept on the left with its associated description on the right. Each term may be used more than once; not all descriptions have a matching term.
Drag:
A. Bounce
B. Received signal level
C.Signal to noise ratio
D. Spectrum analysis
E. Device saturation
Drop:
- Compares teh level of the Wi-Fi signal to the level of background radio signals
- Checks channel utilization and identifies sources of RF interface
- Identifies how strong a radio signal is at the receiver
- Identifies the number of useful bits delivered from the sender to the receiver
- Causes multiple copies of the same radio signal to be received by the receiving antenna
- Degrades wireless network performance

To automatically and dynamically forward inbound traffic received on specific ports to other ports, you should enable port forwarding or network address translation (NAT) on the host.

Port forwarding is a feature that allows network traffic to be redirected from one port on a host to another port on the same or a different host. By enabling port forwarding, you can configure the host to automatically redirect inbound traffic received on specific ports to other ports as per your requirements.

When you enable port forwarding, the host acts as a middleman between the incoming traffic and the destination host. It intercepts the incoming packets, modifies the destination port information, and forwards them to the designated port on the target host. This process can be useful in scenarios where you want to expose services running on different ports of a single host or distribute traffic across multiple hosts.

By using port forwarding, you gain flexibility in managing network traffic without requiring clients or external devices to explicitly know about the redirected ports. It allows you to seamlessly reroute inbound traffic to different ports, providing scalability and adaptability in your network setup.

Learn more about Port forwarding

brainly.com/question/31812328

#SPJ11

TRUE, Polymorphism allows you to write methods in a subclass with the same name as methods in a superclass.

What is Polymorphism?

Polymorphism is the fundamental concept  object-oriented programming (OOP) that describes the situations in which something occurs in the multiple forms. It describes the concept in computer science of being able to access objects of different types through the same interface. This interface could be implemented independently by each and every type.

A simple test can be used to determine whether an object is polymorphic. Polymorphism occurs when an object successfully passes multiple is-a or instanceof tests. All Java classes, as described in our post about inheritance, extend the class Object. As a result, all Java objects are polymorphic because they pass at least two instanceof checks.

To learn more about Polymorphism, visit: https://brainly.com/question/20317264

#SPJ4

Answer:

If you need to change your name on an app, I suggest you head to settings. There, see if you can change anything in regards to your profile. If this does not work, the only way to change your age would be to delete the app and create a new account. These are reccomendations, hopefully they help.

:

The given statement "a nested "if" statement only has an impact if the "if" statement it is contained within evaluates to True" is TRUE.

The use of nested IF functions, or one IF function inside another, increases the number of outcomes that may be tested and allows for the testing of numerous criteria.

Based on their performance, we wish to assign each student a grade.

Return an A if Bob's score in B2 is greater than or equal to 90.

Only if the "if" statement in which it is nested evaluates to True does a nested "if" statement take effect.

The OR function allows you to test many conditions in each IF function's logical test and returns TRUE if any (at least one) of the OR arguments evaluates to TRUE.

Therefore, the given statement "a nested "if" statement only has an impact if the "if" statement it is contained within evaluates to True" is TRUE.

Know more about the nested "if" statement here:

https://brainly.com/question/14915121

#SPJ4

A)19,261 units of labor and 32 units of capital. B)The cost of HYUNDAI is V38,020,800,000, resulting in a cost per car of V29,690,625. C)25,398 units of labor and 40 units of capital. D)V52,463,200,000

If the interest rates double and Hyundai has to pay $1,200,000 per worker per week while Samsung's wage per worker remains at W600,000 per week, Hyundai would require around 9,219 units of labor and 45 units of capital. The prospective cost for Hyundai per car would increase to V41,570,313. Samsung, in this scenario, would need approximately 12,199 units of labor and 50 units of capital. The prospective cost for Samsung per car would be V44,385,938.

A) To find out the number of units of labor and capital required by Hyundai and Samsung to produce 1280 cars, we can use their respective production functions. For Hyundai, Q = 10KL^2, where Q is the number of cars, K is the capital (automated assembly lines), and L is the labor. By substituting Q = 1280, we can solve for K and L. Similarly, for Samsung, Q = 10K^2L. By substituting Q = 1280, we can solve for K and L. Rounding the values to the nearest thousand workers and automated assembly lines gives us the final results.

B) To calculate the cost for Hyundai to produce 1280 cars, we multiply the number of units of labor by the wage per worker and the number of units of capital by the interest cost per assembly line. Adding these costs together gives us the total cost for Hyundai. Dividing the total cost by the number of cars (1280) provides us with the cost per car.

C) The process for calculating the cost for Samsung is similar to that of Hyundai. We multiply the number of units of labor by the wage per worker and the number of units of capital by the interest cost per assembly line. Adding these costs together gives us the total cost for Samsung. Dividing the total cost by the number of cars (1280) provides us with the cost per car.D) In this scenario, the interest rates double, and Hyundai has to pay $1,200,000 per worker per week, while Samsung's wage per worker remains at W600,000 per week. We repeat the calculations using the new wage and interest rate values to determine the number of units of labor and capital required by each firm. The prospective cost per car is then calculated using the same method as in parts B and C, but with the updated costs.

To learn more about HYUNDAI visit:

brainly.com/question/30762678

#SPJ11

Here's some code that might help, assuming that you are using JavaScript.

e = "Hello"

if(e === "Hello"){

    alert(":D")

}else{

    console.log("Um.")

}

I think that the answer is curly brackets.

It becomes sense after reading this. Therefore, it is necessary to connect 100 computers to 20 printers and ensure that every group of 20 computers has access to each printer.

It becomes sense after reading this. Therefore, it is necessary to connect 100 computers to 20 printers and ensure that every group of 20 computers has access to each printer. However, we must recognize that access to one or more printers is not necessary for each computer in each group of 20 computers. Thus, our first step will be to link 80 PCs to 20 printers, giving us a total of 1600 wires. Thus, the 20 PCs in one group are the only ones without access to the printers. So, we're going to choose one of them and attach it to each printer. Thus, it will equal 20 cables when we add the two together.

To know more about printer click here:

https://brainly.com/question/5039703

#SPJ4

Answer:

i cant understand?,

Explanation:

i know its a sort of coding game but what is the goal of the game/task?

Answer:

its a: the decimal value!

Explanation:

Answer:

It's a

Explanation:

One way would just to be to copy the contents of the email and individually send it to anyone you want. Another way if you don't want the people to see who else you have emailed is to put their contact under the "bcc:" category when writing the email.

Approximately 6.9% of users who log in to hotels.com make a booking.

To find the percentage of users that log in and make a booking on hotels.com, we need to calculate the intersection of the two events: logging in and making a booking.

Let's break down the information given:

1. 5% of users log in to hotels.com.
2. Out of those who log in, 70% do not make a booking.
3. 95% of users do not log in to hotels.com.
4. Out of those who do not log in, 98% do not make a booking.

To calculate the percentage of users that log in and make a booking, we can use the following steps:

1. Calculate the percentage of users who log in and do not make a booking:
  - 5% (users who log in) * 70% (do not make a booking) = 3.5% (users who log in but do not make a booking).

2. Calculate the percentage of users who do not log in to hotels.com:
  - 95% (users who do not log in) * 98% (do not make a booking) = 93.1% (users who do not log in and do not make a booking).

3. Subtract the percentage of users who do not log in and do not make a booking from 100% to get the percentage of users who do log in and make a booking:
  - 100% - 93.1% = 6.9% (users who log in and make a booking).

Therefore, approximately 6.9% of users who log in to hotels.com make a booking.

To know more about log in and books click-
https://brainly.com/question/14368953
#SPJ11

Answer:

A) How easily they can fall into the wrong hands.

Answer:

True

Explanation:

Plants and animals can be agents of mechanical weathering. The seed of a tree may sprout in soil that has collected in a cracked rock. As the roots grow, they widen the cracks, eventually breaking the rock into pieces.

The LMC program takes an input number (n) from the user, stores the number 113 in memory, and then outputs the number 113 n times.

The LMC program can be written as follows:

sql

Copy code

INP

STA 113

INP

LDA 113

OUT

SUB ONE

BRP LOOP

HLT

ONE DAT 1

Explanation:

A) The "INP" instruction is used to take input from the user and store it in the accumulator.

B) The "STA" instruction is used to store the number 113 in memory location 113.

C) The "INP" instruction is used to take input from the user again.

D) The "LDA" instruction loads the value from memory location 113 into the accumulator.

E) The "OUT" instruction outputs the value in the accumulator.

F) The "SUB" instruction subtracts 1 from the value in the accumulator.

G) The "BRP" instruction branches back to the "LOOP" label if the result of the subtraction is positive or zero.

H) The "HLT" instruction halts the program.

I) The "ONE" instruction defines a data value of 1.

The LMC program takes an input number (n) from the user, stores the number 113 in memory, and then outputs the number 113 n times.

To know more about LMC program visit :

https://brainly.com/question/14532071

#SPJ11

Answer:

The flash drive is inserted into a computer's USB port, or type-A USB connector. The USB connector communicates between the drive and the computer. The computer recognizes the drive as a separate hard drive, allowing users to move files from the computer's hard drive to the flash drive.

CTRL +  (tilde) is a keyboard shortcut to show formulas instead of values in Excel spreadsheets. It can be found in the upper-left corner of most keyboards, below the Escape key or just left of the 1 key.

The keyboard shortcut to show formulas in a worksheet (as opposed to the value) is `CTRL + ~` (tilde).When working with Excel spreadsheets, you might want to display the formulas instead of the values in your cells. This could be done by using the "Show Formulas" button. But, if you're doing this frequently, it's easier to use a keyboard shortcut. To do this, press `CTRL + ~` (tilde) and it will show all of the formulas in your spreadsheet instead of the values.

The tilde symbol, ~, can be found in the upper-left corner of most keyboards. It is usually located below the Escape key or just left of the 1 key. It's worth noting that pressing the `CTRL + ~` (tilde) keyboard shortcut again will switch back to displaying the values.

To know more about Excel spreadsheets Visit:

https://brainly.com/question/10541795

#SPJ11

combining multiple pay levels into one pay level is called c. broadbanding

Businesses are considered to be broad banding if they establish a larger than usual pay range or compensation band for a given employment level. In order to cover a wide range of pay, businesses typically create a lot of wage bands. These wage scales often overlap one another.

Which industry would benefit most from wide banding. the ambition of huge corporations to mix several management levels. In order to create "wide banding" (salary bands), which enables employees to grow within their position without going over the pay scale, several or even more salary grades are merged in order to make larger ranges.

To know more about broad banding visit :

brainly.com/question/15860110

#SPJ4

Answer:

D. Pie Chart

Explanation:

A pie chart is a circle that has a percentage of certain things. For instance, if you were making a pie chart of what colors your family liked, let's say you have 5 other members in your family. 2 of them like the color blue, 1 likes the color red, 1 likes yellow, and 1 likes green. Your pie chart would be partitioned like a fraction model, and you would put 20% for green, 20% for yellow, 20% for red, and 40% for blue.

Hope this helps! <3

~Sakura Hitoroku

When command is transferred from one Incident Commander to another, it is necessary to have proper communication between the outgoing and incoming commanders. Both the incoming and outgoing commanders must work together to ensure that there is a smooth transition of command.

The following are some of the requirements that need to be fulfilled when the command is transferred from one Incident Commander to another:

1. The incoming Incident Commander should get a briefing on the current situation and the status of the resources available.

2. The outgoing Incident Commander should share all the incident-related information, and provide the incoming commander with an overview of the incident.

3. The incoming Incident Commander should acknowledge the transfer of command and ensure that all personnel are aware of the new command structure.

4. The incoming Incident Commander should review the Incident Action Plan and any other relevant documents, and ensure that they are familiar with the strategies and tactics being used.

5. The outgoing Incident Commander should be available for consultation if needed, and should provide the incoming commander with any additional information as required.

6. Both commanders should exchange contact information and remain available for communication if needed.

To learn more about Incident Commander; https://brainly.com/question/13960733

#SPJ11

This graphics organizer base talks about Software and how it is divided into two groups such as the operating systems and application software.

Software are said to be often shared into  two categories such as:

Note that the Operating systems functions by helping the hardware and produce a kind of interface between the hardware and its user while the Application software is said to be a stage of a programs that help the user to do anything meaningful just as seen in the diagram.

Conclusively, The word "app" has the in meaning with "application". It is known to be the short form of application.

Learn more about Application Software from

https://brainly.com/question/1538272

Sound recorder is a software that is used for recording sounds or audio signals. It can be used for a variety of purposes, such as recording music, lectures, interviews, or any other sound that needs to be captured.

The following steps explain how to use and save the recorded sound with the sound recorder software on your PC or laptop:

Step 1: Open the Sound Recorder application on your PC or laptop. It can be accessed by typing "Sound Recorder" in the search bar.

Step 2: Check the input volume by clicking on the microphone icon. Adjust the input volume according to the required level.

Step 3: Click on the "Record" button to start recording the sound. Once the recording is started, you will see a waveform of the sound signal.

Step 4: After the recording is complete, click on the "Stop" button. The recorded sound will be displayed on the waveform display area.

Step 5: Click on the "Save" button to save the recorded sound. Choose the format and location where you want to save the sound file. If you want to edit the sound file, you can use a sound editing software to do so.

The sound file can then be shared or uploaded to different platforms.Sound recorder software is a convenient and easy way to record audio signals. Following the above steps will help you in playing and saving the recorded sound with sound recorder software on your PC or laptop.

For more such questions on Sound recorder, click on:

https://brainly.com/question/30028137

#SPJ8

Warm Colors:

Cool Colors:

Neutral Colors:

Reds, oranges, and yellows are considered warm, and greens, teals, blues, and purples are considered cool. Colors such as white, black, brown, or gray are all neutral.

Answer:A.

Explanation:

Just had this question if is A

Answer:

its A they right

Explanation:

The values of B13th, 814th, and 815th rows of the primary results table are the contest, names, and votes of the three candidates who were running for the position of Orange County Board of Commissioners

To calculate the sum of votes, we will use the primary total votes array, and assign it to sum of o C votes. The question asks to calculate the sum of votes for the three people who were running for the position of Orange County Board of Commissioners At-Large in 2018. To find these values, we will look at the primary results table.

Therefore, we will add the values of these three rows of the primary total votes array. The syntax for adding these three values is given as follows: sum of o C votes = primary total votes[12] + primary total votes[813] + primary total votes[814].The above code will add the values of the 13th, 814th, and 815th elements of the primary total votes array and assigns the sum to sum of o C votes.

To know more about orange country visit:

https://brainly.com/question/33636561

#SPJ11

Answer:

to tell the truth

Explanation:

l mean there is no reason to keep it secret

Answer:

private

Explanation:

When you delete a section break in a document, the formatting of the text before the break remains unchanged. In a document, section breaks are used to divide the document into different sections, each with its own formatting settings such as page orientation, margins, headers, footers, and page numbering.

When you delete a section break, the formatting of the text before the break is not affected. The purpose of a section break is to allow different formatting settings within a document. Deleting a section break does not automatically merge the formatting of the two sections on either side of the break. Instead, the formatting of the text before the break remains intact.

If you delete a section break and want the formatting to be consistent throughout the document, you may need to manually adjust the formatting settings or apply a new section break with the desired formatting properties. Deleting a section break simply removes the structural division between sections, but the formatting of the text before the break remains unchanged unless you make further adjustments.

Learn more about footers here: https://brainly.com/question/29793304

#SPJ11