plz who can say the story of paul
not more than 250 words​

The statement "a heat map is a three dimensional graphical representation" is False.

A heat map is a two-dimensional graphical representation that uses colors to represent values or intensity levels of a variable across different categories or data points. It does not have a third dimension like a three-dimensional graph. Heat maps are commonly used to visualize data patterns, relationships, or distributions on a two-dimensional surface, such as a map, chart, or grid.

A heat map is a visual representation of data where values are depicted using colors on a two-dimensional surface. It is typically used to display large sets of data in a way that allows quick and easy interpretation. Heat maps are commonly used in various fields, including data analysis, statistics, finance, and geographic information systems (GIS).

In a heat map, each data point or category is represented by a cell or a pixel on a grid or map. The color of each cell corresponds to the value or intensity level of the variable being measured. Typically, a color gradient is used, where different shades or colors represent different ranges or values of the variable. For example, warmer colors like red or orange may indicate higher values, while cooler colors like blue or green may represent lower values.

The purpose of a heat map is to visually highlight patterns, trends, or variations in the data. By using colors, it allows the viewer to quickly identify areas of high or low values and make comparisons between different categories or data points. Heat maps are particularly useful when dealing with large datasets or when there is a need to identify hotspots, clusters, or outliers within the data.

Heat maps can be created using various software tools or programming languages, and they can be applied to different types of data, including geographical data, financial data, website analytics, and more. They provide a visually appealing and intuitive way to explore and analyze complex datasets, making it easier to derive insights and make informed decisions based on the data patterns.

To know more about heat map refer here

https://brainly.com/question/7328531#

#SPJ11

Answer:

potential for

Answer:

what would the Earth be like if we did not have plate tectonics

No mountains will emerge, and the mountains that are on our planet now might disappear completely. This will happen due to erosion by winds and waves since the planet will continue to have an atmosphere. In the end, our continents will be completely flattened and might end up underwater.

correct me if i'm wrong

There is some evidence that population growth today is slowing down rather than increasing.

Population growth refers to the growth or increase in the number of individuals in a population over time. It is affected by factors like birth rates, death rates, migration, and fertility rates. The growth of a population can have both positive and negative effects on the economy and environment. In the past, population growth has been seen as a positive factor for economic growth and development.

However, in recent years, there has been growing concern about the negative effects of population growth on the environment and resources. There is also evidence to suggest that population growth may be slowing down, rather than increasing, in some areas. This is due to a combination of factors such as declining fertility rates, improved healthcare, and better access to education and employment opportunities.

To know more about the population, visit:

https://brainly.com/question/1748950

#SPJ11

Answer:

The thickest layer of earth is the outer core, which is about 2,200 kilometers thick.

Explanation:

Yes, because sediment is changed to sedimentary rock by people with glue guns, and intermediates exist.

In the globe, there are three different types of rock systems: igneous rocks, sedimentary rocks, and metamorphic rocks. Igneous rock, which is constructed of molten material erupting from volcanoes, is one of the basic rocks that was created when the world first began. Sedimentary rocks are created as a result of weathering and erosion. As igneous rocks are worn by wind and water and their sediments are left behind, sedimentary rocks are eventually produced. When igneous and sedimentary rocks are subjected to extreme pressure, metamorphic rock is created.

To know more about sedimentary rock visit:

https://brainly.com/question/10709497
#SPJ4

Answer:

The principle of conservation of matter states that any object can modify its physical and chemical state but during these changes, the mass of the substance remains the same.

After or before the change in the substance state the mass cannot be added nor can be removed.

The tectonic plate's movement of the Earth tells us about how the energy circulates and drives the matter.

The radioactivity flows the heat within the Earth's surface which drives the tectonic to move.

Explanation:

The intersection of coordinates in Ethiopia as shown on the map is  20 N 40 W.

An intersection of coordinates refers to the point where two lines of latitude and longitude intersect on a map or globe. Latitude and longitude are the two coordinates used to specify any location on Earth's surface.

The intersection of two lines of latitude and longitude gives the precise location of a place on Earth's surface. In the case of Ethiopia, the map shows the intersection of coordinates as 20 N 40 W.

Find out more on intersection of coordinates at https://brainly.com/question/24691053

#SPJ1

The cloud consists of air molecules (N2 and O2) with water vapor molecules (H2O) surrounding four droplets (D1, D2, D3, D4) formed by the condensation of water vapor onto solid dust particles (labeled Dust).

The cloud consists of air molecules (represented by small circles) made up of nitrogen gas (labeled N2) and oxygen gas (labeled O2). There are water vapor molecules (labeled H2O) present in the air surrounding the cloud particles. The cloud contains four droplets (labeled D1, D2, D3, and D4) formed by the condensation of water vapor onto solid dust particles (labeled Dust). The droplets should be larger than the individual water vapor molecules to represent their condensed state. The remaining water vapor molecules in the air are not yet condensed into droplets.

To know more about cloud, refer here:

https://brainly.com/question/1242352

#SPJ4

Part a: A geographer is interested in the absolute position in order to describe a place's specific location.

Part B: It could be more useful to plan a trip or figure out how it will take to get from A to B.

The analysis of places as well as the interactions between people as well as their environs is known as geography.

Thus,

Part a: A geographer is interested in the absolute position in order to describe a place's specific location.

Part B: It could be more useful to plan a trip or figure out how it will take to get from A to B.

To know more about the geographer, here

https://brainly.com/question/12790602

#SPJ1

Option c, a tornado resulting in flood and destruction of electrical systems for a community, describes a NA-TECH (natural technological) type of disaster.

NA-TECH (natural technological) disasters are events that involve the interaction of a natural hazard, such as a storm or earthquake, with technological systems, resulting in significant impacts on infrastructure and human activities. These disasters combine the destructive forces of nature with the vulnerabilities of technology.

Option c, a tornado resulting in flood and destruction of electrical systems for a community, aligns with the concept of a NA-TECH disaster. In this scenario, a natural hazard (tornado) leads to the flooding of the area and the destruction of electrical systems, causing disruption and damage to the community's technological infrastructure.

The impact of the tornado extends beyond the physical destruction caused by the storm itself. The resulting floodwaters damage electrical systems, leading to power outages and potentially affecting communication networks, transportation systems, and other critical technological services.

NA-TECH disasters highlight the interconnectedness between natural and technological systems and emphasize the need to consider both in disaster preparedness and response strategies. These events require comprehensive approaches that address the vulnerabilities and risks associated with both natural hazards and the technological systems that support modern society.

Learn more about NA-TECH (natural technological) type of disaster.

brainly.com/question/32778845

#SPJ11

During the Silurian, Laurentia (North America) and Baltica (Scandinavia) collided along a convergent plate boundary.

During the Silurian period, approximately 443 to 419 million years ago, the continents of Laurentia (which corresponds to present-day North America) and Baltica (which includes Scandinavia) were part of the supercontinent called Euramerica.

The collision between Laurentia and Baltica occurred along a convergent plate boundary.

Initial Configuration: At the beginning of the Silurian period, Laurentia and Baltica were separate continents with a vast ocean, known as the Iapetus Ocean, between them.

Plate Convergence: Over time, the tectonic forces caused the movement of the plates. Laurentia and Baltica started converging, moving towards each other.

Subduction: As the two plates approached each other, the leading edge of the Baltica plate began to subduct beneath the Laurentia plate. Subduction occurs when one tectonic plate sinks beneath another into the Earth's mantle.

Collision: The subduction of the Baltica plate beneath Laurentia eventually led to a collision between the two continents. The collision resulted in the formation of a mountain range due to the compression and uplift of the Earth's crust.

Resulting Effects: The collision between Laurentia and Baltica had significant geologic consequences. It caused the closure of the Iapetus Ocean, resulting in the formation of a new supercontinent called Pangaea.

The collision and subsequent mountain-building processes during the Silurian played a crucial role in shaping the geology and geography of the regions that now make up North America and Scandinavia.

It contributed to the formation of mountain ranges, the development of geological structures, and the evolution of the Earth's landmasses over time.

Know more about the Silurian period click here:

https://brainly.com/question/14232051

#SPJ11

In the Government Survey System, an adjustment on the baseline of a quadrangle to account for the curvature of the earth is known as a check.

The Government Survey System, also known as the Public Land Survey System (PLSS), is a method of land description used in the United States to survey and divide land into square-shaped sections.

The correction for curvature is necessary because the Earth is not flat, and as surveyors move across long distances, the shape of the Earth affects the measurements. Surveyors make adjustments to ensure that the lines and boundaries they establish accurately reflect the true shape of the land. These adjustments are made along the survey lines and are crucial for maintaining the accuracy of the survey system.

Learn more about Public Land Survey System here:

https://brainly.com/question/32304829

#SPJ4

The given question is incomplete. Hence, the complete question is:

In the Government Survey System, an adjustment on the baseline of a quadrangle to account for the curvature of the earth is known as a(n) .

1. Fractional township

2. Check

3. Curvilinear benchmark

4. alignment

The characteristic of a newly isolated forest fragment is best described by the "Species losses occur rapidly because very few species can cross the matrix." Therefore, option B is correct.

When a forest fragment becomes isolated, it loses its connectivity to the surrounding habitat or matrix. This isolation restricts the movement and dispersal of species between the fragment and the larger landscape. As a result, the ability of species to migrate or colonize the fragment becomes limited.

The lack of connectivity with the surrounding matrix makes it difficult for many species to reach the forest fragment, resulting in rapid species losses. The reduced gene flow and limited availability of resources in the isolated fragment further contribute to these losses.

Option A, stating that species richness remains stable because the forest fragment is still surrounded by a terrestrial matrix, is incorrect. Isolated forest fragments typically experience a decline in species richness due to the aforementioned factors.

Option C, suggesting that species losses occur slowly because species can still cross the surrounding matrix, is also incorrect. The isolation of the fragment hinders species movement, leading to relatively rapid losses.

Option D, stating that species richness increases over time as species colonize the fragment, is inconsistent with the scenario of a newly isolated forest fragment. Colonization and species richness increase are more likely to occur in older, well-established fragments that have developed suitable conditions for species to thrive.

Option E, suggesting that species losses occur slowly because invasive species emigrate to forest fragments, does not align with the characteristic of a newly isolated fragment. Invasive species are more likely to pose a threat to fragmented habitats in the long term rather than immediately after isolation.

In conclusion, when a forest fragment becomes newly isolated, a characteristic is the rapid loss of species due to the limited ability of species to cross the surrounding matrix. This loss of connectivity and restricted movement of species significantly impact the biodiversity of the isolated fragment. Therefore, option B is correct.

To know more about Species refer here:

https://brainly.com/question/33513318#

#SPJ11

On the PNSN (Pacific Northwest Seismic Network) website, the earthquake that was used as an example for liquefaction destruction is the 1964 Anchorage, Alaska earthquake. This earthquake, also known as the Great Alaska Earthquake, occurred on March 27, 1964, with a magnitude of 9.2, making it the most powerful earthquake ever recorded in North America.

During the earthquake, the ground shaking caused the saturated sandy soils in certain areas of Anchorage to lose their strength and behave like a liquid. This phenomenon, known as liquefaction, led to significant damage to buildings, infrastructure, and the land itself. The liquefaction resulted in the sinking and tilting of structures, the eruption of water and sand from the ground, and the formation of large cracks and fissures.

The PNSN website uses this example of the 1964 Anchorage earthquake to illustrate the destructive potential of liquefaction and its impact on urban areas. It highlights how liquefaction can lead to the collapse and destruction of buildings, roads, and other critical infrastructure, posing a significant hazard to human life and property.

By studying and understanding the effects of liquefaction during past earthquakes like the one in Anchorage, scientists and engineers can better assess and mitigate the risks associated with liquefaction in seismically active regions. This knowledge informs building codes, infrastructure design, and urban planning strategies to enhance the resilience of communities and reduce the impact of future earthquakes.

for more questions on earthquake

https://brainly.com/question/248561

#SPJ8

Answer:

The solution is given below;

Explanation:

The explanation is as follows:

Given that

The coordinates are

A(-2, 8), B(2, 7), C(5, 1), and D(1, 2)

Based on this if the particular figure would be considered as a parallelogram

So,

A + C = B + D

(-2, 8) +(5, 1) = (2, 7) +(1, 2)

(-2+5, 8+1) = (2+1, 7+2)

(3, 9) = (3, 9)

As both are equivalent

Therefore ABCD is a parallelogram

I don't understand your language

Answer:

bình nguyên là dạng địa hình thấp, có bề mặt khá bằng phảng hoặc hơi gợn sóng, độ cao tuyệt đối thường dưới 200m, nhưng cũng có bình nguyên cao gần 500m.

note: bạn ơi mình cùng là người Việt nên có thể trao đổi với nhau, nhưng mà sau này bạn hỏi thì bạn nên sử dụng tiếng anh để nhiều người có thể trả lời được nha, lúc đầu mình sử dụng web này cũng không biết nên bị mọi người nhắc quá trời luôn á.

Explanation:

Answer: 5040 joules

Explanation:

How much energy is released when 150g of silver cools from 220°C to 80°C?

Given the following :

Mass (m) of silver = 150g

Change in temperature (ΔT) = (220 - 80)°C = 140°C

Q=mcΔT

Where Q = quantity of heat

m = mass of silver ; c = specific heat capacity

Specific heat capacity of silver = 0.240 j/g°C

Q = (150 * 0.240 * 140)

Q = 5040J

The islands in Southeast Asia along the equator typically have a tropical climate and Indonesia stretches across many of these islands.

Tropical weather is the norm on Southeast Asian islands that are close to the equator. High annual temperatures, high relative humidity and copious rainfall define this type of climate. There is a distinct wet and dry season and the islands in this area experience consistently warm temperatures.

Indonesia is the nation that encompasses many of these islands. A country made up of thousands of islands, Indonesia is an archipelago in Southeast Asia. Notable islands include Sumatra, Java, Borneo , Sulawesi and Bali. It covers a sizable area and is renowned for its varied topography, extensive cultural history and wealth of natural resources.

Learn more about topography at:

brainly.com/question/15924652

#SPJ4

Answer:

As a creator, God has the right to create the universe the way he wants and to shape it and do what he pleases with it.

Explanation:

This question is about the article "God Is The Creator" which presents how God has the freedom to do whatever he wants with the world we know, since he was the one who created and shaped this world the way he wanted, being the only creator and the only one who has the right to touch all the elements he created. In this case, to better exemplify the freedom that God has in the world, the author decided to present the work of a potter who transforms clay the way he wants, to create the object he wants, just as God did with the world.

Answer:

a. A potter has the rights and freedom of a creator to form the clay in whatever way he wants.

b. Once the pottery is formed, the potter also has the right and freedom to do with it as he pleases.

Answer:

Explanation:

Clay has a high content of clay minerals that give it its plasticity. Clay minerals are hydrous aluminum phyllosilicate minerals, composed of aluminum and silicon ions bonded into tiny, thin plates by interconnecting oxygen and hydroxide ions.

Answer:

they use Euro

Explanation: I took french

Answer:

1 Euro 1.00

$1.21 in U.S money

Explanation:

I did some research. Hope this helps

Answer:

Because of its proximity to Arab lands, many people in the Sahel have adopted Islam.

Explanation:

The Sahel is a region in Africa. It is located between the Sahara Desert and sub-Saharan Africa, being a relatively dry region dominated by the steppe. This region, on its north, has boundaries almost exclusively with Arab dominated countries, so naturally, the people living in the Sahel have had some influence from them.

One of the biggest influences among the people living in the Sahel from the Arabs has been in the form of religion. The majority of the population in the Sahel has adopted Islam and abandoned their native religions. The adoption of Islam has contributed to numerous cultural changes of the people in this region since Islam as a religion has strict rules that people need to follow in order to be considered as Muslims, so numerous native cultural traits have also been abandoned.

The relationship between insolation and air temperature through the course of day indicates that air temperature reaches a maximum afternoon, whereas absorbed insolation reaches a maximum at noon.

The sun radiation that strikes an item is known as insolation. It is crucial to obtain insolation estimates for specific locations on Earth since these numbers are used to estimate the size and production of solar power plants. Some of the energy from solar radiation that strikes an item will be absorbed, while the remainder will be reflected.

A measurement of the air's heat or cold is its temperature. It is the weather parameter that is most frequently measured. The kinetic energy, or energy of movement, of the gases that make up air is more explicitly described by temperature. The speed of gas molecule motion rises with air temperature.

Option B is the correct answer.

The complete question is, "The relationship between insolation and air temperature through the course of day shows?

A. air temperature reaches a maximum at noon when absorbed insolation also reaches a maximum.

B. air temperature reaches a maximum afternoon, whereas absorbed insolation reaches a maximum at noon.

C. air temperature maximum and minimums are not related to absorbed insolation.

D. air temperature reaches a minimum at midnight when there is no absorbed insolation."

Learn more about Insolation here:

https://brainly.com/question/28716552

#SPJ4

To begin with, Poland has a lot of different interesting facts like physical features, agriculture, and culture features. Poland is one of the ninth largest countries in Europe by the land area. The Polish American relations were officially established in 1919. Since 1989, Polish and American relations have been strong and Poland is one of the most stable European allies of the United States being part of both NATO  and the European Union. Poland is famous for being the home of the scientists.

Poland has many interesting facts about its  physical features. The official name is Poland’s Rzeczpospolita Polska or as in America it is called Poland. This country is located on the continent of Europe and is surrounded by Germany on the west. The Czech Republic and Slovakia to the south, Ukraine and Belarus to the east, while Lithuania and the Russian province of Kaliningrad Oblast to the northeast of Poland. Poland is about 120,726 square miles in size, that is about 3 times smaller than the United States.

Poland has many agricultural techniques as well as a great economy. Poland has the largest economy in Eastern Europe, with GDP totaling $420 billion in 2007. The major industries in Poland are machine building, iron and steel, coal mining , chemicals, shipbuilding, food processing, glass, beverages, and textiles. Poland is one of the largest manufacturing industries in chemicals manufacture. Poland also has a very strong presence in making televisions. Most of Poland is country grounded in forestry and agriculture.  A lot of Poland’s land area is used for farming barley, oats, rye, and wheat. In farms they raise dairy cattle, pigs, poultry, and cultivate fruit. They imported goods for manufacturing and industrial retooling, such as machinery and equipment, fuels, minerals, chemicals, and metals. Some goods they exported were  furniture, foods, motor boats, light planes, hardwood products, casual clothing, shoes and cosmetics. The climate in Poland is warm in the summer and is freezing cold in the winters. Poland has many land forms such as the, sand dunes, deserts, mountains, hilly plains, lowlands, and many bodies of water. Lastly, Poland has many natural resources made from minerals are brown coal,copper, zinc, sulphur, lead, and silver.

Poland has many Cultural features such as languages, holidays, education, food, and recreation. One of the language the Polish people speak is a West Slavic language spoken primarily in Poland. Some of the Poland holidays are January 1st New Year’s Day, on May 1st Labor Day, on May 3rd its Constitution Day, on August 15th it is Assumption Day and lastly on November 11th it is Independence Day. The education in Poland is compulsory and starts at the age of six or seven, per the Reforms of 1999, from the “0” class kindergarten (Polish przedszkole, literally pre-school) and at the age of seven, for the 1st grade of primary school (Polish szkoÅ‚a podstawowa). Compulsory education lasts nine years. An important diet they have in Poland is meat. Pork is the most popular meat, and the most commonly eaten meat dish is a fried, breaded pork cutlet served with thick sauce. Beef, ham, and sausage are also eaten regularly. The meat stew called bigos is often called the national dish of Poland. Poland and the USA are two different worlds entirely. The USA is sunny and positive and casual. Poland is cold, dark and romantic. There is an ancient feel in Poland, something almost mystical.

Even Though Poland has many interesting facts, it ranks  the ninth country in Europe.  Ever since 1989 the Americans and the Polish are pretty strong allies they are both part of both NATO and the European Union. We learned that Poland was invaded by the Germans in World War II. Also 90% of Poles have completed at least secondary education. An interesting fact we found is that Poles eat pizza with ketchup and watching Home Alone is a Christmas tradition.

Answer:

A) Aborigines

Explanation:

Hope this helps and have a nice day :)

Answer:

the decline in the number of large zebra mussels

Explanation:

that's the answer