QUICK!!,
Explain what the engineering team should advise in the following scenario.

Situation: An engineering team is analyzing a problem with a dam near a large metropolitan area. The dam reservoir has a capacity of 300 billion cubic feet, and it produces hydroelectric power for local municipalities. The dam has developed a severe crack.

Answer:

cost and benefit

health and safety

ethical and legal

environmental effects

sustainability

Explanation:

these are the correct answers

Answer:

A, C, F, G, H

Explanation:

environmental effects

ethical or legal implications

sustainability

health and safety considerations

cost and benefit

Answer:

The volume of the quantity of gas when the pressure changes to 740 mm Hg is approximately 9.92 L

Explanation:

The properties of the quantity of gas are;

The initial pressure of the gas, P₁ = 1.39 atm

The initial volume of the given volume of gas, V₁ = 6.95 L

The final pressure of the quantity of gas, P₂ = 740 mmHg

Boyle's Law states that at constant temperature, the pressure, P, of a given mass of gas is inversely proportional to its volume, V

Mathematically Boyle's Law can be written as follows;

\(P \propto \dfrac{1}{V}\)

Therefore, we have;

P₁·V₁ = P₂·V₂

Where;

V₂ = The final volume of the quantity of gas when the pressure changes to 740 mm Hg

\(\therefore V_2 = \dfrac{P_1 \cdot V_1}{P_2}\)

By substituting the known values, we have;

\(V_2 = \dfrac{1.39 \ atm \times 6.95 \ L}{740 \ mmHg} = \dfrac{1.39 \ atm \times 6.95 \ L}{0.973521 \ atm} = 9.92159459459 \ L \approx 9.92 \ L\)

The final volume of the quantity of gas when the pressure changes to 740 mm Hg = V₂ ≈ 9.92 L

Answer:

vertical distance.

Explanation:

Question - An advantage of using a folding rule over a cloth or steel tape measure is that the stiffness of the folding rule makes it the best choice when measuring a ?

Solution -

The answer is - vertical distance.

Reason -

An advantage of using a folding rule over a cloth or steel tape measure is that the stiffness of the folding rule makes it the best choice when measuring a vertical distance.

Answer:

Sharing devices such as printers saves money.

Site (software) licences are likely to be cheaper than buying several standalone licences.

Files can easily be shared between users.

Network users can communicate by email and instant messenger.

Security is good - users cannot see other users' files unlike on stand-alone machines.

Data is easy to backup as all the data is stored on the file server.

I hope I helped

The volume of 1 liter of liquid water will remain unchanged when the pressure doubles and the temperature remains constant at 14.7 PSI.

The volume of a liquid, such as water, is generally considered to be almost incompressible. Therefore, when the pressure applied to a liquid increases while the temperature remains constant, the volume does not change significantly. This is known as the isochoric or constant volume condition.

In the given scenario, the pressure doubles from 14.7 PSI to 2 * 14.7 PSI = 29.4 PSI. However, since the temperature remains the same, the volume of the liquid water will not be affected. It will still be approximately 1 liter.

This conclusion is based on the fact that water is considered to be incompressible under ordinary conditions. In reality, there may be very small changes in volume due to the compressibility of water, but these changes are typically negligible and can be disregarded for most practical purposes.

For more such questions on pressure,click on

https://brainly.com/question/30117672

#SPJ8

Answer:

True

Explanation:

Answer:

The value of resistance of a resistor having four colour bands in the order yellow, violet , orange and silver is 47000 ± 10%

Answer:

Explanation:

yellow = 4

violet = 7

orange = 3 zeros

silver = 10% tolerance.

So the value of the resistor is

47000 +/-10%

10% means 4700 ohms either side of 47000 so that means

42300 < x < 51700

Usually a ten % tolerance is more than adequate for most applications.

Answer:

I think the answer is B but if I am wrong please let me know thank you :)

Biomedical engineers may need to dilute solutions for several reasons. One common reason is to adjust the concentration of a particular substance to a desired level for experimental or clinical purposes.

Dilution allows for precise control over the concentration of a solution, enabling researchers or healthcare professionals to study the effects of different concentrations of substances on biological systems.

In biomedical engineering, dilution is often employed when working with drugs or therapeutic agents. By diluting a concentrated drug solution, engineers can create different dosages suitable for specific applications. This is crucial for ensuring patient safety and achieving desired therapeutic outcomes.

Additionally, dilution is necessary for calibration and quality control purposes in biomedical engineering. Diluting stock solutions of known concentrations can generate a range of standard solutions used to calibrate instruments, verify measurement techniques, or assess the accuracy of analytical methods.

Dilution plays a critical role in ensuring accurate and reliable data collection, analysis, and experimentation within the field of biomedical engineering.

In summary, dilution is an essential technique for biomedical engineers as it allows them to control the concentration of substances, customize drug dosages, and maintain accuracy in calibration and quality control processes, all of which are vital for research, development, and healthcare applications.

For more questions on Biomedical engineers , click on:

https://brainly.com/question/30235387

#SPJ8

Typically, a two-room apartment has a living area, bedroom, kitchen, and bathroom. The square footage, number of windows, floor plan, available storage space, and amenities are some further requirements.

The typical size of a two-bedroom house design is 800 to 1500 square feet (74 to 140 square metres), with 1, 1.5, or 2 baths. While one-story plans are more common, there are also two-story layouts available, depending on your demands and the size of your land.

The rooms consist of the kitchen(1), living room(2), and bedroom(3); the bathroom is listed separately. The same arithmetic would apply if there were two bedrooms, with a third room added for the second bedroom. When renting a two-bedroom apartment.

To know more about apartment visit:-

https://brainly.com/question/27266877

#SPJ1

Question-"what effect is created by introducing the two knives to the jury room? * specifically in act iii when juror 3 and 8 are reenacting how the kid could have stabbed his father."

Answer:

B. Jagged stones

Explanation:

The material that Steven can use to achieve a rough texture is jagged stones. Optical texture on a building is described as visual characteristics of the structure as observed from afar, such as windows, voids, corners and sweeping curves. Tactile texture is the physical touch a person feels when in contact with the building material. A visual texture can also be described by the appearance of patterns as they appear on the surface of the building material. To attain a rough texture on the building surface, Steven should use jagged stones.

Answer:

I have chosen the process of injection molding as the manufacturing process for my research.

Injection molding is a common manufacturing process used to produce a wide range of parts and products, from simple to complex shapes. The process involves injecting a molten material, such as plastic or metal, into a mold cavity. The mold cavity is made up of two halves that are held together by a clamping mechanism.

To begin the injection molding process, the mold halves are first closed and locked into place by the clamping mechanism. The mold is then heated to a specific temperature to ensure that the material being injected can flow freely and fill the mold cavity.

Next, the molten material is injected into the mold cavity through a small opening called a sprue. The material fills the mold cavity and hardens to the shape of the cavity. Once the material has hardened, the mold is opened and the part is ejected.

Injection molding is often used to produce high-volume parts and products with consistent dimensions and quality. It is also a cost-effective method for producing complex shapes and designs. The process is highly automated and can produce parts and products with tight tolerances and smooth surfaces.

One potential disadvantage of injection molding is that it requires the use of expensive mold cavities, which must be custom-made for each part or product being produced. Additionally, the process can only produce parts and products in the shape of the mold cavity, so any changes to the design will require the creation of a new mold.

Overall, injection molding is a widely-used manufacturing process that offers many advantages for the production of high-volume parts and products. Its ability to produce complex shapes and designs, along with its cost-effectiveness and consistency, make it a popular choice in many industries.

The scope of BS computer science in Pakistan is quite vast

try this :)

Answer:

Tuscany, Central Italy

Explanation:

Answer:

Italy

Explanation:

The Leaning Tower of Pisa is in the city of Pisa, in Tuscany, a region in west-central Italy. More specifically, the tower is on the grounds of the city's cathedral complex, which is known as the Campo dei Miracoli or Piazza dei Miracoli, the “Square of Miracles.”

Answer:

the velocity = 10 m / sec if an object moves 100 m in 10s

Answer:

The twenty unfertilized plants could be described as the control group or the comparison group.

Explanation:

Generally, a control group is a group of subjects that is not exposed to the experimental treatment or intervention being studied. The purpose of a control group is to provide a baseline or comparison for the experimental group. The experimental group in this scenario would be the twenty plants that received fertilizer. The control group, the twenty unfertilized plants, serves as a reference point to assess the effect of the fertilizer on the growth of the plants. This allows the experimenter to determine if the fertilizer is the cause of any observed differences in plant growth between the two groups.

The  place that does “ the home of your ancestors” refer to is Cobo Verde.

This is known to be a kind of a house, that  is seen in the village, or a place where a family must have lived in the past.

Note that in the above context, The  place that does “ the home of your ancestors” refer to is Cobo Verde.

earn more about guilty from

https://brainly.com/question/25713795

#SPJ1

Answer:

Do you mean writing about shops that close on Sunday's and making the opinion whether they should or not?

Explanation:

The term housing starts refers to the start of construction on a new residential housing unit.

The term housing starts refers to the start of construction on a new residential housing unit.

A housing start is a new residential construction project. Housing starts are registered once construction begins on a new building for residential use.

A housing start is a new residential construction project. Housing starts are registered once construction begins on a new building for residential use. Housing starts can provide valuable information about the economy.

The housing start is registered once construction of a new building begins. There are different stages of new housing construction; the start usually happens when the foundation of the building is excavated. All the stages are:

Housing starts can provide valuable information about the economy.

For example, researchers can look at decades of housing starts to get an idea of how housing growth has been affected by population growth.

To learn more about housing stars refers to;

https://brainly.com/question/12222996

#SPJ1

Answer:

go to settings and u may figure out

Answer:

Mechanical engineering is an engineering discipline that combines engineering physics and mathematics principles with materials science to design, analyze, manufacture, and maintain mechanical systems.

Answer:

A combination of high and low sensors are used to tell the control panel when water levels are too high or too low. The control panel will then automatically turn the pump on or off depending on the corrective action needed.

Explanation:

purpose of all components in a water level sensor​

Answer: altitude, the distance of a point above sea level.

Answer:

I like to draw, watch anime and hang out with frnds

Explanation:

:)

Answer:

Because wool is good but it Costs much.And polyester is so so but it dont Cost much and so the materials are 50% good and 50% so so

Answer:

Explanation: Oh no I might be wrong but it could be D. Sorry if I’m wrong, that’s how I PERSONALLY analyze information.

The one that is not a long term effect of radiation is eye injury. The correct option is D.

Radiation can cause DNA damage in our cells. High radiation doses can result in Acute Radiation Syndrome (ARS) or Cutaneous Radiation Injuries (CRI). High radiation doses may also cause cancer later in life.

Excessive radiation exposure, such as being near an atomic blast, can result in acute health effects such as skin burns and acute radiation syndrome.

It can also have long-term health consequences like cancer and cardiovascular disease.

All other options including cataracts, heart or kidney diseases, cancer, etc. are long term effects and eye injury is not among them.

Thus, the correct option is D.

For more details regarding radiations, visit:

https://brainly.com/question/13934832

#SPJ1

Oil can serve both purpose in these context, to clean and to cushion

Both Technician A and B are correct

oil is used in machine parts majorly as lubricants to prevent wear and tear of machine parts, they also double as coolants, hence they transfer and distribute heat to prevent stalling due to over heating of parts

Learn more about engine oil here:

https://brainly.com/question/25614315

Answer:

1: They are less harmful to the environment.

2: They can be charged faster than lead-acid batteries.

3: They have a longer life cycle of up to 15-20 years, depending on their environment and use.

4: They also have a high discharge rate, meaning they can release energy faster.

Answer:

the diameter of the Sun is approximately 1.392 million kilometers.

Explanation:

To find the diameter of the Sun, we can use the formula:

diameter = 2 x distance x tan(angle/2)

where distance is the distance between the Sun and the Earth, angle is the subtended angle of the Sun, and tan is the tangent function.

Substituting the values given, we get:

diameter = 2 x 150000000 km x tan(32'/2)

diameter ≈ 1.392 x 10^6 km

Therefore, the diameter of the Sun is approximately 1.392 million kilometers.