Select the correct location on the map.
In which region are the ruins of Tell Qaramel located?

Answers

Answer 1

Answer:

The Tell Qaramel ruins are located in Western Syria.


Related Questions

Two small, poorly drained lakes lie close to each other in a northern forest. The basins of both lakes are composed of the same geologic substratum. One lake is surrounded by a dense Sphagnum mat; the other is not. Compared to the pond with Sphagnum, the pond lacking the moss mat most likely has ________

Answers

Answer:

The correct answer is C)

Explanation:

The lake with no Sphagnum mat has less disolved oxygen. The moss is a plant which generates and liberates oxygen as part of its metabolism. The oxygen disolves into the whater of the lake which has this Sphagnum mat, giving it a higher concentration of disolved oxygen than the other one.

How did Wegener use the reconstruction of climate belts on this map to justify continental
drift? Why can't the pattern of glacial striations be explained if continents always occupied
their present-day positions?

Answers

Wegener was able to use  evidence from climate change  so as to be able to give support his theory in the sense that he used  explained that   an island in the Arctic Ocean do contains fossils of tropical plants.

Base on the theory that continents were once connected  help in explaining the glacial striations  however, if the  continents always occupied their present-day positions, it will be hard to explain pattern of glacial striations since the theory of continental drift theory is based on the rotation of the Earth.

What is Wegener  continental drift theory?

It should be noted that Wegener suggested that  rotation of the Earth that come as a result of how the continents  shift towards and apart from each other.

Learn more on continental drift theory at:

https://brainly.com/question/16297062

#SPJ1

Question 10 of 10
What is the value of x?
X/4 = 3/6

Answers

Answer:

x=8

Explanation:

(4)x/4 = 3/6(4)

X=3/24

3/24=8

X=8

Im timed rn please hurry

Im timed rn please hurry

Answers

The correct answer is D. Four.

Explanation

The map shows a relief map of an area. The relief maps are characterized by having contour lines that are a representation system composed of different shapes or lines that represent cutting planes of the surface depending on their height, these are characterized by keeping distance between them, and depending on this it can know if the terrain has a more or less steep incline. Also, contour lines allow us to recognize where the peak of a mountain is since this being the highest part is represented by a circle or undefined shape that represents the last contour of the plane. Therefore, it can be said that the map has four peaks because it has four circular shapes that allow us to recognize the highest points on the map, that is, they represent the peaks. Therefore, the correct answer is D. 4

Complete Essay #17: Compare and contrast the benefits of being a traditional missionary with being a tent maker.

Answers

Answer: Traditional missionaries and tent makers are two approaches to serving in a foreign mission field. While both involve serving others and spreading the gospel, there are some differences in the benefits that each approach offers.

Traditional Missionaries:

Benefits:

Dedicated time and energy for missionary work: Traditional missionaries have the opportunity to focus solely on evangelism and discipleship without being distracted by other jobs or responsibilities. They are able to dedicate their full time and energy towards the mission work.

Access to financial support and resources from mission agencies, churches, and donors: Traditional missionaries have the benefit of access to financial support from mission agencies, churches and donors which can be crucial for the success of their work.

Strong sense of purpose and fulfillment in being called to full-time missionary service: The sense of purpose and fulfillment that comes from being called to full-time missionary service can be a huge benefit for traditional missionaries.

The ability to engage with the local community in a more focused way: Traditional missionaries are able to engage with the local community in a more focused way and establish deep relationships with locals.

Drawbacks:

Financial dependence on outside sources can be challenging: Traditional missionaries may face financial challenges since they are dependent on outside sources for funding.

May face significant cultural barriers, including language and customs: Cultural barriers such as language and customs can be a challenge for traditional missionaries to overcome.

Can be difficult to establish relationships with locals due to the perceived power dynamic and cultural differences: Traditional missionaries may face difficulties in establishing relationships with locals due to the perceived power dynamic and cultural differences.

Limited opportunities to engage with those outside of the Christian community: Traditional missionaries may have limited opportunities to engage with those outside of the Christian community.

Tent Makers:

Benefits:

Can support themselves financially and be self-sufficient: Tent makers are able to support themselves financially and be self-sufficient which can be a great benefit for them.

Can build relationships with locals in a more natural way: Tent makers have the opportunity to build relationships with locals in a more natural way since they are not solely focused on evangelism and discipleship.

More opportunities to engage with those outside of the Christian community: Tent makers may have more opportunities to engage with those outside of the Christian community since they are not solely focused on evangelism and discipleship.

Ability to blend in and integrate with the local community more easily: Tent makers can blend in and integrate with the local community more easily since they are living and working among them.

Drawbacks:

Less time and energy for missionary work: Tent makers have less time and energy for missionary work since they have to balance their work and mission work.

Limited access to financial support and resources from mission agencies, churches, and donors: Tent makers may have limited access to financial support and resources from mission agencies, churches, and donors.

May face challenges in maintaining their Christian faith while working in a secular environment: Tent makers may face challenges in maintaining their Christian faith while working in a secular environment.

Limited opportunities for focused evangelism and discipleship: Tent makers may have limited opportunities for focused evangelism and discipleship.

In conclusion, both traditional missionaries and tent makers have their own benefits and drawbacks. Traditional missionaries have the benefit of being able to dedicate all their time and energy towards missionary work, and access to financial support from outside sources. Tent makers have the benefit of being self-sufficient and having more opportunities to engage with those outside of the Christian community. Ultimately, the decision to be a traditional missionary or tent maker depends on personal preferences, skills, and circumstances.

study the usage of GIS

Answers

GIS (Geographic Information System) is a computer-based tool that allows users to collect, store, analyze, and display geographic information.

Spatial analysis: GIS can be used to perform spatial analysis to identify patterns and relationships in geographic data. This can help with a wide range of tasks, such as identifying areas prone to natural disasters, analyzing the impact of urban development on the environment, and assessing the potential risk of disease outbreaks.

Environmental management: GIS can be used to manage and analyze environmental data, such as air and water quality, land use patterns, and natural resource management. This can help organizations to better understand the impact of human activities on the environment and develop strategies to mitigate negative effects.

Disaster management: GIS can be used to manage emergency response efforts during natural disasters or other crises. This can include tracking the location and movement of resources such as personnel and equipment, identifying areas in need of assistance, and coordinating relief efforts.

Urban planning: GIS can be used to analyze land use patterns, population growth, and other factors that influence urban development. This can help planners to make informed decisions about zoning, transportation, and other issues related to urban growth and development.

Overall, the use of GIS has become increasingly important in a wide range of fields and industries, providing organizations with valuable tools for analyzing and managing geographic data.

For more questions on GIS

https://brainly.com/question/29775060

#SPJ11

What rivers form part of the border between Germany and Poland?

Answers

- Oder river
- Lusatian Neisse

I might be wrong but is it the Oder and Lusatain Neisse?

Population pressure on resources has been particularly damaging in the case of tropical rainforest ecosystem. Discus

Answers

Answer:Yes

Explanation:

Increase of population increases the demand of resources that contributes to forestal degradation, forestal loss, an increased population density, and increasing deforestation.  This is partly because they are encroaching upon the land and cutting down its trees for the land as well as to use for fuel.  This also effects the creatures that live in the forest by taking away their home.  

Given B(–4, –6), under which reflection is B′(4, –6)

Answers

Answer:

180 degrees

Explanation:

B (-4, -6) is in quadrant III. B' is in quadrant IV

what is the geography makeup of brazil in 4 sentences?

Answers

Answer:

Brazil is the largest country in South America and the fifth largest nation in the world.It is most well known for its dense forests. And large water bodies such as the Amazon, the world's longest river. The coastal zone is noted for thousands of kilometers of tropical beaches.

Explanation:

Select the region where the following landform is found:

Delaware Bay

Appalachian Highlands
Coastal Plains
Great Plains

Answers

Great Plains is the correct answer

why tidal power is called a flow
resource, not a renewable resource.

Answers

Answer: It is flow resource for as long as there is tidal and water movement then their will be energy but that doesn't last forever

Explanation:

Answer and Explanation:

Flow resources: water, wind and sunlight are neither renewable nor non-renewable because they can only be used when and where they are. The energy in a river can be used to generate electricity, but it must be captured by turbines or it will be lost.

A: A flow resource is a resource that there is a certain amount of on Earth. Water is not renewable because renewable is a resource that you use up and reproduce. You can not produce water, you just clean it and reuse it. Tidal power is water power so it is not renewable.

I hope this helps :)

What are major characteristics of capital cities in Northern European countries?

Answers

Answer:

High standard of living: These cities are known for their high quality of life, with well-developed infrastructure, excellent healthcare systems, and high levels of safety.

Cultural diversity: These cities are often melting pots of different cultures, with people from all over the world living and working together.

Economic centers: They are usually major economic centers, with strong and diverse economies. Many of these cities are home to large multinational corporations and have thriving startup scenes.

Sustainable and eco-friendly: Northern European countries are known for their commitment to sustainability and the environment. Their capital cities often reflect this, with green spaces, eco-friendly public transportation, and environmentally conscious policies.

Historical and architectural landmarks: Many of these cities have a rich history and are home to stunning architectural landmarks, such as castles, cathedrals, and palaces.

Active and vibrant: The cities are often known for their active and vibrant lifestyles, with plenty of opportunities for outdoor recreation, sports, and cultural events.

Explanation:

Questions
1. An object travels 3 meters in 1.5 seconds. What is its velocity?

Answers

Answer:

Explanation: probably like 37

not sure

Answer:

4.5 m/s

Explanation:

I'm not fully sure :(

What do we call the type of graph shown in the previous image? HELP PLEASE <3

What do we call the type of graph shown in the previous image? HELP PLEASE &lt;3

Answers

Answer:

it looks like a line graph

Where are the warmest climates located

Near the equator

Near the north and South Pole

Northern hemisphere

Southern Hemisphere

Answers

Answer:

Near the equator. ...........

Near the equator because that’s the hottest place on earth

Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions.
Online Content: Site 1

Where were the empires of Ghana, Mali, and Songhai located? (Site 1)

Answers

Answer:

Africa.

Explanation:

Ghana, Mali, and Songhai were located in the western region of Africa, south of the Sahara Desert, near the Niger River.

I hope this helps u.please mark me as brainliest

Answer:

Dogon sculptures serve as a physical medium in initiations and as an explanation of the world. Ghana, Mali, and Songhai were located in the western region of Africa, south of the Sahara Desert, near the Niger River.

Explanation:

New oceanic lithosphere forms as a result of.....

○ sea-floor spreading.
○ normal polarity.
○ reverse polarity
○ continental drift. ​

Answers

Answer:

sea-floor spreading

Explanation:

Large igneous provinces (LIPs) Choose one: A. erupt magma with high viscosity and are therefore localized but very thick. B. represent special events in the Earth's history that may have been caused by superplume activity. C. occur only along continental margins. D. are places where huge amounts of felsic magma have been erupted or intruded.

Answers

Answer:

D. are places where huge amounts of felsic magma have been erupted or intruded.

Explanation:

Large igneous provincession areas of great extension, have more than 100 thousand square meters, that arose as a result of the eruption of continuous magma in short geological intervals of time. Large igneous provinces consists of an accumulation of igneous rocks and features extrusive rocks, such as delava flows and pyroclast deposits.

How did Crater Lake, Oregon form? Thousands of years of erupting pyroclastic material from the volcano created a closed wall around the primary cone. Then that space was filled with water eventually, and the former cone is known as Wizard Island. About 1500 meters of summit of a composite volcano collapsed after an explosive eruption of about 50 cubic kilometers of pyroclastic material. Later the caldera was eventually filled with water. About 1500 meters of summit of a shield volcano collapsed after an explosive eruption of about 50 cubic kilometers of pyroclastic material. Later the caldera was eventually filled with water. About 1500 meters of summit of a composite volcano collapsed as a result of a gradual subterranean drainage of the magma chamber under the volcano leaving the summit unsupported. Later the caldera was eventually filled with water. About 3500 meters of summit of a composite volcano collapsed after an explosive eruption of about 500 cubic kilometers of pyroclastic material. Later the caldera was eventually filled with water.

Answers

Answer:

About 3500 meters of summit of a composite volcano collapsed after an explosive eruption of about 500 cubic kilometers of pyroclastic material. Later the caldera was eventually filled with water.

Explanation:

Crater Lake is one that is found to occupy a basin in Mount Mazama in south-central Oregon in the western United States. Mount Mazama, which is about 12,000 ft (roughly 3,700m) collapsed during an intense volcanic eruption, which led to the formation of volcanic depression called caldera.  

Pyroclastic flows of pumice and ash affected the nearby areas which also included the water body that drained the mount  Mazama.

Which theory of world domination was used by the United States after World War Two?

Answers

Answer:

Hi

Explanation:

This promise lasted throughout Truman's time in office and continued in the administrations that followed. The policy of containment later informed the “domino theory,” which stated that one country falling to Communism meant the surrounding countries were likely to fall as well.

1.4.1 1.4.2 What is the difference between a drought and desertification? (2 x 2) Quote ONE climatological condition that will result in Meteorological droughts. (1 x 1) 1.4.3 Identify TWO manmade causes of the drought in the Eastern Cape from the extract. (2 x 1) 1.4.4 In a paragraph of approximately EIGHT lines suggest sustainable strategies that can be Implemented to manage drought effectively. (4x2)​

Answers

1.4.1) Drought refers to a temporary severe water scarcity caused by reduced precipitation, while desertification is a long-term process of land degradation and becoming desert.

1.4.2) One climatological condition that can result in meteorological droughts is a persistent lack of precipitation over an extended period of time, leading to significantly below-average rainfall.

1.4.3) Two man-made causes of the drought in the Eastern Cape from the extract are poor water management by the local government and vandalism of local infrastructure.

1.4.4) The sustainable strategies that can be implemented to manage drought effectively are as under:-

Implement strict water-use regulations and enforce water Invest in water infrastructure improvements Promote xeriscaping and native plant landscaping techniques Encourage the use of water-efficient technologies and appliances Support research and development of drought-tolerant crop varieties and farming techniques that optimize water use.Establish community-based water management programs to empower local communities Increase investment in water storage and rainwater harvesting infrastructure Educate the public about the importance of water conservation

Thus, it is important to implement these things to manage drought effectively.

Learn more about the drought here:

https://brainly.com/question/31944290

#SPJ1

It is about identifying the source and location of the potential hazards.
a.Worksite evaluation c. Worksite research
b. Worksite preparedness
d. Worksite risk management

Answers

Answer:

i dont know

Explanation:

hsbisnsudbueanoanwuendubrudbdsj

How dose earth’a water move in the water cycle?

Answers

Answer: The Atmosphere and the Water Cycle

Water at the Earth's surface evaporates into water vapor which rises up into the sky to become part of a cloud which will float off with the winds, eventually releasing water back to Earth as precipitation.

Explanation:

APPLYING MAIN IDEAS

“If I allowed him to defy the civil authorities in this manner, I myself would be violating my oath to uphold and defend the Constitution.”
–President Harry Truman, April 11, 1951

In this quotation, Truman refers to his unpopular decision to fire _________________.
a.
General Dwight D. Eisenhower
c.
General Douglas MacArthur
b.
his vice president
d.
his attorney general


Please select the best answer from the choices provided

A
B
C
D

Answers

Answer:b

Explanation:

Answer:

The Answer's B

Explanation:

What is the difference between a dependent variable and an
independent variable?

Answers

The difference between a dependent variable and an independent variable is :

The independent associated dependent variables area unit an experiment's 2 core components.

In a scientific experiment, associate variable quantity could be a variable that's altered or changed to examine however it affects the variable.

The term "dependent variable" refers to the variable that's being tested associated monitored in an experiment.

The effects of the freelance and dependent variables act. The impact on the variable is seen and recorded because the experimenter modifies the variable quantity.

As a result, the variable ultimately captures the impacts of modifying the variable quantity.

To know more about a dependent variable and an independent variable click at https://brainly.com/question/23377866

Madison and Oxford are the same distance from the equator and they are both near the ocean. How does the air temperature of Madison compare to the air temperature of oxford?

Answers

Despite that Madison and Oxford are both near the ocean, the air temperature of Madison is likely to be lower than the air temperature of Oxford.

How does the proximity to the ocean affect their air temperature?

The proximity to  ocean can affect air temperature of a location because all the areas near the ocean tend to have milder temperatures due to the moderating effect of the water.

In case of Madison and Oxford,  they are at same distance from the equator, we can assume that latitude is not a significant factor in their temperature difference.

Therefore, it is likely that the proximity to the ocean is the main reason why Oxford has a milder temperature than Madison.

Read more about air temperature

brainly.com/question/31441122

#SPJ1

convergent boundaries are classified according to the

Answers

Convergent boundaries are classified according to what occurs when two plates intersect.

Two plates moving toward each other create a convergent boundary, and this boundary can be one of three types, depending on whether the crust on either side is oceanic or continental. They come in three varieties: ocean-ocean, ocean-continent, and continent-continent.

When two different continents meet, a phenomenon known as "continent-on-continent convergence" takes place. At one time, the continents were separated by oceanic crust that was gradually subducted beneath one of the continents.When oceanic crust is subducted beneath continental crust, a phenomenon known as "ocean-continent convergence" takes place. By doing so, the area between the subduction zone and the edge of the continent becomes an active continental margin.When two plates carrying ocean crust collide, it's called ocean-ocean convergence. At a trench on the ocean floor, a piece of ocean crust slides under another. Over the subduction zone, the ocean trench arcs outward, towards the subducting plate.

To learn more about convergent boundaries, click here:

https://brainly.com/question/1114405

#SPJ4

An estate developer has bought several acres of
land to be developed into a wildlife sanctuary.
Write down 6 things the developer should put in
place such that your animal will survive in the
sanctuary.

Answers

Answer:

1. Food, such as grubs, insects, meat, etc. (anything your animal eats)

2. Trees or bushes so your animal can climb and gnaw

3. Other surrounding animals that will not potentially hurt your animal, such as small birds (just for entertainment)

4. A waterhole (not just a dish, as they should feel comfortable to drink whenever they please)

5. A private place where they can lay down and take a nap, without having someone watching them

6. Toys that suit your animal (if you have a leopard, maybe some balls with meat inside of them so the leopard can bat it around!)

which of the following is most characteristic of a market economy

Answers

One of the most characteristic features of a market economy is the presence of free market forces determining the allocation of resources and the prices of goods and services. In a market economy, individuals and businesses interact in the marketplace based on supply and demand, without significant interference from the government. Here are some key characteristics of a market economy:

1. Private Ownership: In a market economy, private individuals and businesses have the right to own and control property, including land, capital, and resources. They can use their property to produce goods and services for sale in the market.

2. Competition: Market economies thrive on competition. Multiple sellers and buyers compete with each other to offer the best products at the most competitive prices. Competition helps drive innovation, efficiency, and consumer choice.

3. Price Determination: Prices in a market economy are determined by the forces of supply and demand. The interaction between buyers and sellers in the marketplace determines the equilibrium price, which reflects the value placed on goods and services.

4. Profit Motive: In a market economy, individuals and businesses are motivated by the desire to make profits. Profit serves as an incentive for entrepreneurs to take risks, invest in productive activities, and innovate.

5. Limited Government Intervention: Market economies tend to have minimal government interference in economic activities. The role of the government is mainly to enforce property rights, ensure fair competition, and provide a legal framework for the functioning of markets.

6. Consumer Sovereignty: Market economies prioritize consumer preferences and choices. Consumers have the power to determine what goods and services are in demand through their purchasing decisions. Producers respond to consumer demand by producing the goods and services that are most desired.

Overall, a market economy emphasizes voluntary exchange, competition, and individual freedom in economic decision-making. It allows for efficient resource allocation, innovation, and economic growth driven by market forces rather than centralized planning or government control.

for more questions on economy

https://brainly.com/question/28210218

#SPJ8

Other Questions
A prism is completely filled with 72 cubes that have edge lengths of 12 in. What is the volume of the prism? The shoes still have a marginal cost of 25$. You want to earn a profit, so you bathe a price of what The economy is in a recession with high unemployment and low output.a. Draw a graph of aggregate demand and aggregate supply to illustrate the current situation. Be sure to include the aggregate-demand curve, the short-run aggregate supply curve, and the long-run aggregate-Supply curve.b. Identify an open-market operation that would restore the economy to its natural rate.c. Draw a graph of the money market to illustrate the effect of this open-market operation. Show the resulting change in the interest rate.d. Draw a graph similar to the one in part (a) to show the effect of the open-market operation on output and the price level. Explain in words why the policy has the effect that you have shown in the graph. During the 1630s, the MassachusettsBay ColonyA.) saw its population dwindleB.) saw its population explodeC.) disappeared without a traceD.) merged with the Plymouth Colony Q1. Determine whether the following series converges absolutely, converges conditionally, or diverges. (-1)" * n+1 n+1 n=1 The input consists of blocks that begin with a non-negative integer indicating thenumber of students in a course, followed but that many strings indicating each studentsdetails, of the form UPI Original Grade Total Grade. The items within the string (i.e. UPI,and the grade info) are separated using blank spaces. The strings inside a block are separatedby a new line character, while blocks are separated by two new line characters. The outputshould be sorted as discussed above, with every block separated by two new line characters.No need to print the number of strings in a block.INPUT:4adf3123 15 55sdf3245 65 90oij3452 65 90iugk234 78 902iujh345 87 90asjb672 77 88There are two courses, one with 4 students, and one with 2. The first item on each line isthe UPI, the second is the original grade, while the last is the total grade including the bonusmark.OUTPUT:And after sorting, we get the following. Note how the three students with thesame total grade:iugk234 78 90sdf3245 65 90oij3452 65 90adf3123 15 55iujh345 87 90asjb672 77 88Please write a program in python. You will be writing a 2-2.5 page research paper based on a case of injustice. For example, HunterScott thought it was an injustice that the captain of the Indianapolis was blamed andcourt-martialed for the sinking of the ship. His project sought to right that wrong. You will find anexample of injustice based on a topic that interests you. Your paper will be completed through thefollowing steps:Step 1. Brainstorm ideas. In class 6.2Step 2. Write a topic proposal, including a research question. Due 6.2-3.Research proposalStep 3. Start googling sources and assessing them for credibility. You will need 5 sources. Due6.8Source Reliability Questionnaire.Step 4. Works Cited page: follow the Model Works Cited pages to guide you. Due 6.8.Model Works Cited PageHow to Cite a WebpageStep 5. Find at least 2 quotations from each of your 5 sources. Due 6.8Step 6. Create an appealing visual essay or social media post Due 6.16 Proving your injustice Suggest ways to improve the situation On 1 November 2018, Graceville Ltd purchased an item of property, plant and equipment for $50000. The terms of the purchase were as follows: $50000 could be paid within 30 days, or $65000 in one year's time. The management of Graceville opted to pay $65000 in one year's time. Delivery and handling costs of $4000 were incurred, as well as engineering fees of $1200 to ensure that the asset was correctly installed. The asset began operations on 6 January 2019. During January, holding costs of $500 wwere incurred because the asset was operating at less than full capacity. In addition, $900 costs comprising labour and small parts were incurred in day-to-day servicing of the asset. Management of Graceville Ltd uses the revaluation model to account for the asset. Required Prepare any necessary general journal entry(ies) to initially record and measure the asset in accordance with the requirements of AASB 116 'Property, Plant and Equioment' How does the shift between settings contribute to the theme? Use text evidence to support your response A sound of thunder According to Szymanski (2000), if no teams were discriminatingin playeremployment, what should be true about the relationship betweentheracial makeup of a team and its performance? pliss help me... Imagine that you are about to start writing a novel. What do you foresee as being the greatest challenges when writing your novel? What are some ways you could overcome these hypothetical challenges? The first three terms of a geometric sequence are 2, 7, and 24.5. What is the next term in the sequence? A 85.75 B 49 C 42D 29.5 E 36.75 Find the variance of the data. 22, 34, 7, 27, 25 x = 23 Variance () = [?] What is the equation of a line that has slope of -4/3 and passes through the point (12,-4) Which of the following people would you expect to have the bestemployee benefits?O new hire at a large companyO part-time at a small companyO full-time employee at a large company who has been there for yearsO new hire at a small company help please thank you sm i need help please someone Circular buffer is a fixed size data structure functions like a queue which operates data on a First in First out basis. When adding data into circular buffer, you append at the next position of last item in your buffer. If the buffer is full, you overwrite the first item. When removing data from the circular buffer, you remove from the first item in your buffer. If the buffer is empty, then you display an error message. Here is how our circular buffer operates: 1. Create a circular buffer class to implement the circular buffer operations. 2. Use a Python list to represent the buffer. 3. Create head and tail int variables to store indices. Head contains the index of the first item where data is retrieved from; and tail contains the index next to the last item where new data is appended at. 4. When reaching the end of the buffer, you re-calculate the index for head or tail, for instance if the capacity of the buffer is 10, when tail pointer reaches 9, the next index for tail is becoming to 0. It overwrites the first element. (Use modulus operator (%) to calculate the new index.) 5. Create methods to perform the data operations such as insert/delete/search item from the buffer. Clear the buffer, check whether the buffer is empty, peek for the first and last item, etc. 6. Create a circular buffer object to test if the data operations are working as they should be. Class Name: CircularBuffer Members in the CircularBuffer class ** All attributes (data fields) are private. Attributes/Data fields Data type Purpose _capacity int the max size of the buffer size int current size of the buffer buffer list we use list to represent our buffer head int head contains the index of the first element _tail Int tail contains the index of next available spot to insert new element Purpose Constructor and getters _init Parameter list: (self, capacity) Initialize the data fields: Create buffer with the size of capacity and set each element as None Set size, head and tail to O Return capacity Return size Return buffer Return head Return tail get_capacity get_size get_buffer get_head get_tail Method Name Return value None add Purpose Parameter list: (self, item) Insert item into the tail position and re-adjust the tail position delete Deleted item clear None is_empty bool If it requires overwrite (head=tail), make sure to re-adjust the head Increase the size Parameter list: (self) Delete the item at the head position by returning the item and re-adjust the head position Parameter list: (self) Reset buffer items to None, and reset head, tail, size to O Parameter list: (self) Return true if the buffer is empty, otherwise false Parameter list: (self) Return the first item in the buffer (in head position) Parameter list: (self) Return the last item in the buffer (item before tail position) Parameter list: (self, item) If item is in the buffer, return true, otherwise false Parameter list: (self) Display buffer items from head to tail peek_first First item peek_last Last item find bool _str_ string Main (Test) Program Functions in the main program: Functions Return Value main Purpose Prompt the user to enter the capacity Create CircularBuffer instance Test class using the following steps: 1. delete operation 2. add 15 3. add 5 4. delete operation 5. add 3 6. add 26 7. delete operation 8. add 76 9. add 105 10. search 48 11. display first and last items 12. display the sum of all items 13. display the largest and smallest item 14. clear the buffer Pass in circular buffer object and add all items and return the sum Pass in circular buffer object and return the index holding the largest item Pass in circular buffer object and return the index holding the smallest item add_all int get_max_index int get_min_index int Assignment Instructions: 1. Create a python script file to store CircularBuffer class and name it circular_buffer.py 2. Create a python script file which serves as the test program and name it assignment2_yourFirstName_yourLastName.py 3. You can create extra functions to enhance your program 4. Add comments to document your project and code 5. Add doc string to document your module/classes/functions 6. Submit two python files and a screen shot of your output in Canvas for grading Program Output: Enter Buffer Capacity:3 1. Delete operation: Buffer is empty 2. Add 15: Buffer: 15 3. Add 5: Buffer: 15 --> 5 4. Delete operation: 15 has been deleted Buffer: 5 5. Add 3: Buffer: 5 --> 3 6. Add 26: Buffer: 5 --> 3 --> 26 7. Delete operation: 5 has been deleted Buffer: 3 --> 26 8. Add 76: Buffer: 3 --> 26 --> 76 9. Add 105: Buffer: 26 --> 76 --> 105 10. Search 48: 48 is not in the buffer 11. Display items at first and last 26 is the first item, and 105 is the last item 12. Add all items: Sum = 207 13. Locate the largest/smallest item The largest item = 105 and the smallest item = 26 14. Clear the buffer Buffer is empty Essay writing to agree or disagree for parents should buy textbooks for their school children Write an article for a school magazine with information about keeping healthy.