the ability of water molecules to stick to other water molecules is due to ......


1. adhesion
2. solubility
3. cohesion

Ionic bonding in sodium chloride. An atom of sodium (Na) donates one of its electrons to an atom of chlorine (Cl) in a chemical reaction, and the resulting positive ion (Na+) and negative ion (Cl−) form a stable ionic compound (sodium chloride; common table salt) based on this ionic bond.

Hope it helps

Can u mark me as......

But its OK if u didnt

The result obtained by converting 20 quibs of skvarnick to sleps, given that 5 quibs of skvarnick is equal to 3 sleps, is 12 sleps

We can convert quibs to sleps by using the following conversion scale:

5 quibs of skvarnick = 3 sleps

With the above conversion scale we can convert 20 quibs of skvarnick to sleps as illustrated below:

5 quibs of skvarnick = 3 sleps

Therefore,

20 quibs of skvarnick = (20 quibs × 3 sleps) / 5 quibs

20 quibs of skvarnick = 12 sleps

Thus, from the calculation made above, we can conclude that 20 quibs is equivalent to 12 sleps

Learn more about conversion:

https://brainly.com/question/28905093

#SPJ1

Carbon = C

Water = C

Aluminum foil = E

Plastic = E

Tin = E

Silicon dioxide = C

Helium = C

Arsenic = C

Carbon dioxide = C

Sodium Chloride = C

If Earth revolved at a faster rate, what would most likely be daylight hours would decrease. Therefore, option B is correct.

Earth's rotation can be described as the rotation of planet Earth around its own axis and changes in the orientation of the rotation axis in space. Earth rotates once in 24 hours around Sun, but once in 23 hours, 56 minutes, and 4 seconds w.r.t. other distant stars.

Earth's rotation can be slowed slightly with time therefore daylight was shorter in the past due to the tidal effects the Moon has on Earth's rotation.

The earth's spinning on its axis causes days to turn into nights. The rise and fall of tided effect on the Direction of the Wind, Cyclones, Ocean currents, and change of day and night.

If the earth's rotation becomes faster it will complete one spin in less than 24 hours therefore, the daylight hours would decrease.

Learn more about the earth's rotation, here:

https://brainly.com/question/293387

#SPJ6

If one atmosphere of pressure is equal to 760 torr, a pressure of 705 torr is equal to value in atmospheres is  0.96 atm

1 atm = 760 torr

So, 734 torr = (1 atm) (734 torr) /(760 torr)

= 0.96 atm

According to the kinetic theory of gases, gas particles are always in motion and clashing with one another and the container walls they are held in. Although collisions with container walls are elastic (i.e., there is no net energy gain or loss due to the collision), a gas particle does exert a force on the wall during the contact. Pressure is created by the buildup of all these forces, which are dispersed throughout the container's walls. By dividing the total force of all gas particle/wall collisions by the area of the wall, one can calculate pressure (P):

One of the basic measurably present quantities of this phase of matter, pressure, is an effect that all gases have.

Learn more about pressure here:

https://brainly.com/question/29226259

#SPJ4

Heat is the amount of energy transferred between objects due to temperature differences. It results in a transfer of thermal energy from a warmer object to a cooler object. In this case, when Dave is boiling water on the stove, the pot gets warmer when placed against a hot burner, and steam rises from the pot.

The hot burner transfers heat to the pot through conduction, as the molecules in the burner collide with the molecules in the pot, transferring thermal energy. This leads to an increase in the temperature of the pot.

Simultaneously, the heat from the burner causes the water molecules in the pot to gain energy and increase in temperature. As the water reaches its boiling point, the added heat energy allows the water molecules to overcome intermolecular forces and transform into a gas phase, forming steam. The rising steam is a visible indication of the phase change from liquid to gas.

Therefore, Dave is observing the transfer of heat from the hot burner to the pot through conduction, resulting in an increase in the pot's temperature and the formation of steam as water undergoes a phase change.

To know more about energy transferred click this link -

brainly.com/question/13087586

#SPJ11

When a precipitation reaction occurs the resulting mixture of liquid solution and solid precipitate would be considered a heterogeneous Mixture.

Chemical reactions known as precipitation reactions take place in aqueous solutions to produce precipitates. Moreover, chemical changes that occur inside the substances are a part of chemical processes.

Moreover, chemical reactions take place between two or even more chemical substances, known as reactants. As a result, the reactants might be solid, gaseous, or liquid in nature. When a precipitation reaction occurs the resulting mixture of liquid solution and solid precipitate would be considered a heterogeneous Mixture.

Therefore, when a precipitation reaction occurs the resulting mixture of liquid solution and solid precipitate would be considered a heterogeneous Mixture.

To know more about precipitation reaction, here:

https://brainly.com/question/29762381

#SPJ3

Answer:

An intermolecular force is the force of attraction or repulsion which act between neighboring particles (atoms, molecules, or ions). Whereas the covalent bonds are the interatomic linkage that results from the sharing of an electron pair between two atoms.

Intermolecular forces hold molecules together in a liquid or solid. Intermolecular forces are generally much weaker than covalent bonds.

Out of all the mystery liquids provided, the one identified as water is liquid W.

The density of any liquid is given by its mass divided by its volume.

So if we want to check that which of the following liquid is water then we have to check the density of all the liquids.

The one who is density matches with the density of water will be water.

Checking for liquid W,

Density=mass/volume

Putting the given values for liquid W,

Density = 5/5

Density = 1g/ml.

Now, checking for liquid X,

Density=mass/volume

Putting the given values for liquid X,

Density = 6/2

Density = 3g/ml.

Now checking for liquid Y,

Density=mass/volume

Putting the given values for liquid Y,

Density = 2/1

Density = 2g/ml.

Now finally checking for liquid Z,

Density=mass/volume

Putting the given values for liquid Z,

Density = 8/2

Density = 4g/ml.

As we can see from the result the density of liquid w is matching with the density of water so we can say that the liquid W is water.

To know more about density, visit,

https://brainly.com/question/1354972

#SPJ4

Complete question-A student finds the mass and volume of four mystery liquids. The data is provided. The student knows that the density of water is 1g/mL. Which of the four mystery liquids can be correctly identified as water?

Liquid W: Mass 5 Volume 5

Liquid X: Mass 6 Volume 2

Liquid Y: Mass 2 Volume 1

Liquid Z: Mass 8 Volume 2

Answer:

Sound travels more quickly through solids than through liquids and gases because the molecules of a solid are closer together and, therefore, can transmit the vibrations (energy) faster.

Answer: Solid molecules are packed together.

Explanation:

I answered the question and got it right.

The statement consistent with the interaction between Ser 195 and the intermediate is "Atom OG of Ser 195 is covalently bound to atom CB of GBS, which is an sp² hybridized carbon."

The interaction between Ser 195 and the intermediate involves the covalent bonding of the oxygen atom (OG) of Ser 195 with the carbon atom (CB) of GBS. The statement "Atom OG of Ser 195 is covalently bound to atom CB of GBS, which is an sp² hybridized carbon" accurately describes this interaction.

In biochemistry, the hybridization state of an atom determines its geometry and bonding properties. In this case, the sp² hybridization of the carbon atom (CB) of GBS indicates that it forms three sigma bonds with neighboring atoms in a trigonal planar arrangement.

The covalent bond between the OG atom of Ser 195 and the CB atom of GBS contributes to the stability of the interaction between Ser 195 and the intermediate.

The amino acids involved in hydrogen bonding with the intermediate are Asp 189, Ser 190, and Gly 219. Among these, the pair of atoms with the shortest bond length is between the NH2 group of GBS and the OD1 atom of Asp 189.

This hydrogen bond involves a strong electrostatic attraction between the positively charged hydrogen of the NH2 group and the negatively charged oxygen atom of OD1.

Regarding the formation of a cystine group that defines the shape of the binding site for the guanidinobenzoyl group of the covalently bound intermediate, the pair of residues involved is Cys 42 and Cys 58. Cystine is formed through the oxidation of two cysteine residues, resulting in the formation of a disulfide bond (-S-S-) that contributes to the stabilization and structure of the binding site.

These specific interactions and bond formations are crucial for the proper functioning and stability of the protein under consideration, highlighting the importance of molecular interactions and structural features in biological systems.

Learn more about covalently bound

brainly.com/question/24890973

#SPJ11

Answer:

56.69905

Explanation:

The conversion factor from pounds to kilograms is 0.45359237, which means that 1 pound is equal to 0.45359237 kilograms.

The wavelength of white light is different them the wavelength of colored light thus the color of the mirror affect the way if reflect the light.

Wavelength can be defined as the distance in the line of advance of a wave from any one point to the next point from corresponding phase.

It can also be defined as the distance between the corresponding waves i.e. crests and troughs.  

The wavelength of light will decreases when the wave interact with the colored particle.

Thus, the wavelength of white light is different them the wavelength of colored light thus the color of the mirror affect the way if reflect the light.

To learn more about wavelength, refer to the link below:

https://brainly.com/question/12924624

#SPJ1

Maltose is a disaccharide important in the formation of alcoholic beverages.

Maltose:

Maltose, also known as maltobiose or maltose, is a disaccharide formed from two glucose units linked by α(1 → 4) bonds. In isomeric isomaltose, the two glucose molecules are linked by an α(1 → 6) bond. Maltose is both members of the amylose homologous family, which is the major structural motif in starch. When beta-amylase breaks down starch, it removes two units of glucose at a time to form maltose. An example of this reaction can be found in germinating seeds, which is why malt is named after it. Unlike sucrose, it is a reducing sugar.

Also known as malt sugar, it is made up of two glucose molecules bonded together. It is an important disaccharide in the formation of alcoholic beverages.

Alcoholic Beverage:

Alcoholic beverages (also called alcoholic beverages, adult beverages, or beverages) are beverages that contain ethanol, a type of alcohol that acts like a drug and is made by fermenting grains, fruits, or other sources of sugar. Drinking alcoholic beverages, often referred to as "drinking", plays an important social role in many cultures. Most countries have laws regulating the production, sale and consumption of alcoholic beverages.

Regulations may require the alcohol percentage (alcohol or proof) to be displayed and warning labels to be used. Alcoholic beverages are legal in most countries around the world, although in some countries such activities are outright banned. The global liquor industry passed $1 trillion in 2018.

Learn more about Maltose:

https://brainly.com/question/19755762

#SPJ4

Answer:

Ethanol is a disaccharide important in the formation of alcoholic beverages. Ethanol is produced by yeast during fermentation when sugar is converted to alcohol. This process involves the breaking down of carbohydrates, such as glucose and fructose, into simple sugars, which are then converted into ethanol.

A strategy known as Carbon Capture and Storage would remove some of the CO₂ from smokestack emissions of coal-burning power and industrial plants and convert it to a liquid to be pumped under pressure into underground storage sites.

Climate change is one of the most important environmental challenges facing humanity. Large amounts of carbon dioxide (CO₂) are released into the atmosphere through the combustion of fossil fuels, such as coal, and this contributes greatly to the rise in global temperature. For this reason, scientists and environmental organizations have sought a way to reduce CO₂ emissions. One such strategy involves carbon capture and storage (CCS).

Carbon capture and storage involves extracting CO₂ from the exhaust gases of coal-fired power plants and other industries. The CO₂ is separated from the other gases and converted into a liquid through a process known as CO₂ capture. The liquid can then be stored in subway sites at pressure level. This helps reduce CO₂ emissions, as the CO₂ is not released into the atmosphere, but is stored in the ground.

Learn more about Carbon Capture and Storage:

https://brainly.com/question/12199481

#SPJ4

Yes, it is possible to make an aqueous solution of strontium hydroxide that gives a pOH of 10.54 because of thr Sr ions in the solution.

First, we can use the relationship between pH and pOH,

pH + pOH = 14

Since we want a pOH of 10.54, we can solve for the pH,

pH = 14 - pOH

pH = 14 - 10.54

pH = 3.46

Next, we can use the ionization constant expression for strontium hydroxide,

Sr(OH)₂(s) → Sr²⁺(aq) + 2OH⁻(aq)

Kw = [H⁺][OH⁻] = 1.0 x 10⁻¹⁴

Hence, the concentration will be given as,

[OH⁻] = 2[Sr²⁺]

Substituting this expression into the Kw expression, we get,

Kw = [H⁺][OH⁻] = [H⁺] (2[Sr²⁺])

1.0 x 10⁻¹⁴ = [H⁺] (2x)

where x is the molar concentration of strontium ions.

Solving for x, we get,

x = 1.0 x 10⁻¹⁴ / 2

x = 5.0 x 10⁻¹⁵

Therefore, the molar concentration of strontium ions in solution is 5.0 x 10⁻¹⁵ M.

To know more about pOH value, visit,

https://brainly.com/question/22664380

#SPJ1

Answer:

A bendable

Explanation:

I got 100 on that test

Answer:

Explanation:

I think it is D

The chemical process going on is oxidation process

KMnO4 is a robust oxidizing agent.

Vanadium is a transition component having 4 frequent oxidation kingdom

When KMnO4 to Vanadium at decreased oxidation state, it will oxidize Vanadium to its very best oxidation.

Therefore, the chemical process going on is oxidation process.

More on Chemical Reaction

https://brainly.com/question/11231920

Answer:

Facts About Biosphere 1: The Evolution Of Biosphere

Biosphere has evolved.  It started from the non living matter or simple organic compound which created the life. This process is called bioprocess which conducted around 3.5 billion years ago.

Facts about Biosphere 2: the life of earth

It is not easy for the scientists to determine the life of earth.  However, they can estimate it after the discovery of the metasedimentary rocks from Western Greenland. The scientists believed that it was dated back around 3.7 billion years old.

Facts About Biosphere 3: Another Evidence For The Earth’s Life

Evidence was found in Western Australia. The discovery of microbial mat fossils made the scientists estimated that the earth was dated around 3.48 billion years ago.

The compound O,O'-dihydoxyazobenzene, have a greater fluorescence quantum yield because of the rigidity provided by the -N=N- group. Option D is correct.

Fluorescence quantum yield is a measure of the efficiency of a molecule to emit fluorescence, which is dependent on various factors, including the rigidity or flexibility of the molecule and the presence of any functional groups that can affect the electronic structure. In the given options, O,O'-dihydoxyazobenzene has a rigid structure due to the presence of the azo group (-N=N-) that is expected to restrict the molecule's vibrational freedom, thereby reducing non-radiative energy loss and enhancing fluorescence.

On the other hand, bis(o-hydroxyphenyl) hydrazine has a flexible structure due to the -NH-NH- group, which can lead to higher non-radiative energy loss, reducing the fluorescence quantum yield. Therefore, O,O'-dihydoxyazobenzene is expected to have a greater fluorescence quantum yield than bis(o-hydroxyphenyl) hydrazine.

Hence, D. O,O'-dihydoxyazobenzene, because of the rigidity provided by the  -N=N- group is the correct option.

To know more about Fluorescence here

https://brainly.com/question/14742655

#SPJ4

--The given question is incomplete, the complete question is

"Which compound in each pair below would you expect to have a greater fluorescence quantum yield? A) bis(o-hydroxyphenyl) hydrazine, because of the chemical activity of the two extra H atoms. B) bis(o-hydroxyphenyl) hydrazine, because of the flexibility provided by the -NH -NH - group C) O,O'-dihydoxyazobenzene, because of the chemical activity of the -N=N- group. D) O,O'-dihydoxyazobenzene, because of the rigidity provided by the  -N=N- group."--

Under certain conditions, excessive Sweating results in water depletion, which is called Dehydration. A sign of water depletion is Weight Loss.

Dehydration means less intake of fluid such as water, juices etc or by losing more fluid than the amount of fluid you have taken. Fluid can be lost in the form of sweat, tears, urine, vomiting, or diarrhoea.

A dehydration reaction can be defined as the chemical reaction between any two compounds where one of the products is water. Dry mouth and tongue, no tears when crying, Sunken eyes and cheeks are some of the signs of dehydration.

Under certain conditions, excessive Sweating results in water depletion, which is called Dehydration. A sign of water depletion is Weight Loss.

To know more about Dehydration refer to the link:

https://brainly.com/question/1301665

#SPJ4