The __________ dampens the vibration of combustion and is engaged by the starter when you start the engine.

Locomotives, steam ships, and factories with coal-powered machinery these modern products would not be available without watt’s contribution.

The industrial society of the 18th century was significantly impacted by James Watt's steam engine. Compared to preceding models, it was more economical and efficient.

The watt, a unit of power in the International System of Units (SI) equal to one joule of work performed per second, was called in honour of Watt because of his contributions to science and industry.

Watt's steam engine allowed the steam engine to be utilised to drive rotating equipment in factories like cotton mills, expanding its range of potential uses. It should come as no surprise that Watt's steam engine was in high demand and was swiftly adopted by numerous industries.

His modifications to the steam engine's design transformed it from a water pump for coal mines with few other uses into the source of propulsion that sparked the Industrial Revolution. Rather than being a theorist, Watt is better renowned for his work as an innovator and mechanic.

To learn more about James Watt refer :

https://brainly.com/question/1008453

#SPJ4

In the two scenario above concerning port fuel-injection and sequential fuel injectors, only Technician b is correct.

A vehicle often has one fuel injector per cylinder and if one has a four-cylinder car, it would also have four fuel injectors.

Note that Fuel-pressure regulators that are found on a port fuel-injected systems is one that often work with injector pressures that is said to be of 30 to 55 PSI.

Learn more about Technician from

https://brainly.com/question/5122191

The suction line is sloped downwards unto the compressor for the prevention of accumulation of moisture on the downside of the walls.

To be able to maintain a dry surface without the accumulation of moisture on the lower walls, a downward slope is to be created between the evaporator and the compressor of such line of suction.

Hence, the way to prevent the accumulation of moisture has been aforementioned.

Learn more about moisture here:

https://brainly.com/question/14894449

#SPJ1

Answer:

The electric ceiling fan was invented in 1882 by engineer and inventor, Philip Diehl. He had earlier invented an electric sewing machine and adapted the motor from this invention to create the ceiling fan. He called his invention the “Diehl Electric Fan” and it was such a success that he soon had many other people competing with him.

Explanation:

Answer:

  30√2 ≈ 42.426 volts

Explanation:

The RMS value of the signal is the DC equivalent. For a sine wave, the mean of the square is half the square of the peak value. Then the Root-Mean-Square is ...

  RMS = √((Vp)^2/2) = Vp/√2

For Vp = 60 volts, the equivalent DC voltage is ...

  V = (60 volts)/√2 = 30√2 volts ≈ 42.426 volts

Answer:

The HTML ul tag is used for the unordered list. There can be 4 types of bulleted list: To represent different ordered lists, there are 4 types of attributes in <ul> tag. This is the default style. In this style, the list items are marked with bullets.

Answer:

Ordered

\({ \tt{ < ol > .... < / ol > }}\)

Unordered

\({ \tt{ < ul > .... < /ul > }}\)

The flux density is 0.75 T (Tesla) when the total flux emerging from the pole is 150 Wb (Weber) and the pole face dimensions are 200mm by 100mm.

Flux density (B) is the ratio of the total flux (Φ) to the area (A) through which the flux passes. In this case, the total flux emerging from the pole is given as 150 Wb (Weber). The area of the rectangular pole face is calculated by multiplying its length (200 mm) by its width (100 mm), resulting in an area of 20,000 mm^2 or 0.02 m^2. Dividing the total flux by the area, we get the flux density: B = Φ / A = 150 Wb / 0.02 m^2 = 7,500 T / 10^4 m^2 = 0.75 T (Tesla). Therefore, the flux density is 0.75 T.

To know more about Weber click the link below:

brainly.com/question/12438404

#SPJ11

The sky lantern had risen to a height of 6.75 meters when the stone touched the ground.

The bridge is 70 feet above the water.

For the first scenario, we can use the equations of motion to determine the height of the sky lantern when the stone touched the ground.

Let's denote the initial height of the sky lantern as 'h' and the time it takes for the stone to touch the ground as 't'.

We know that the sky lantern rises vertically upward with a uniform rate of 2.7 m/s, so its velocity can be represented as v = 2.7 m/s. The velocity of the stone when it touches the ground is v = 0 m/s because it has come to a stop.

Using the equation of motion for displacement, we have:

s = ut + (1/2)at²

Since the sky lantern is moving upward with a constant velocity, the acceleration (a) is 0 m/s². Therefore, the equation simplifies to:

s = ut

Substituting the known values, we have:

h = (2.7 m/s) * t

We are also given that the stone strikes the ground after 2.5 seconds, so t = 2.5 seconds.

Calculating the height (h):

h = (2.7 m/s) * (2.5 s)

h = 6.75 meters

Therefore, the height of the sky lantern when the stone touched the ground is 6.75 meters.

The sky lantern had risen to a height of 6.75 meters when the stone touched the ground.

We can use the equations of motion to find the height of the bridge above the water when the marble falls into the water.

The marble is thrown vertically upward with an initial velocity (u) of 66 ft/s, and it falls into the water 5 seconds after being thrown upward.

Using the equation of motion for displacement:

s = ut + (1/2)at²

Since the marble is thrown upward, the acceleration (a) due to gravity is -32 ft/s² (negative because it acts in the opposite direction of the initial velocity).

The equation becomes:

s = (66 ft/s)(5 s) + (1/2)(-32 ft/s²)(5 s)²

Simplifying the equation:

s = 330 ft - 400 ft

s = -70 ft

The negative sign indicates that the displacement is downward, as expected when the marble falls.

Therefore, the height of the bridge above the water is 70 feet.

Please note that the equations used assume no air resistance and a constant gravitational acceleration, which may not be entirely accurate in real-world scenarios.

To know more about height  visit:

https://brainly.com/question/25060590

#SPJ11

An alpha-numeric designator which is systematically assigned at the time of manufacture, so as to identify the manufacturer, month, year, location, and batch is referred to as lot number.

A product can be defined as any physical object (tangible item) that is typically produced by a manufacturer so as to satisfy and meet the demands, needs or wants of every customer. Also, some examples of a product include the following:

A lot number can be defined as an alpha-numeric designator which is systematically designed and assigned at the time of manufacture, so as to identify the manufacturer, month, year, location, and batch.

Read more on products here: brainly.com/question/14308690

#SPJ1

Explanation:

rational

Step-by-step explanation:

The discriminant (d) of a quadratic equation ax^2 + bx + c = 0ax

2

+bx+c=0 is:

\boxed{\mathrm{d =} \ b^2 - 4ac}

d= b

2

−4ac

.

If:

• d > 0, then there are two real solutions

• d = 0, then there is a repeated real solution

• d < 0, then there is no real solution.

In this question, we are given the quadratic equation 3x^2 + 4x - 2 = 03x

2

+4x−2=0 . Therefore, the discriminant of the equation is:

b² - 4ac = (4)² - 4(3)(-2)

= 16 - (-24)rational

Step-by-step explanation:

The discriminant (d) of a quadratic equation ax^2 + bx + c = 0ax

2

+bx+c=0 is:

\boxed{\mathrm{d =} \ b^2 - 4ac}

d= b

2

−4ac

.

If:

• d > 0, then there are two real solutions

• d = 0, then there is a repeated real solution

• d < 0, then there is no real solution.

In this question, we are given the quadratic equation 3x^2 + 4x - 2 = 03x

2

+4x−2=0 . Therefore, the discriminant of the equation is:

b² - 4ac = (4)² - 4(3)(-2)

= 16 - (-24)

= 40

Since the discriminant, 40, is greater than zero, the quadratic equation has 2 rational solutions.

= 40

Since the discriminant, 40, is greater than zero, the quadratic equation has 2 rational solutions.

Tire plies consist of separate layers of rubber cushioned nylon cord and make up the body of the tire.

The layers of rubber cushioned nylon cord that make up the body of the tire are known as tire plies or tire carcass. These plies are an essential component of the tire construction and are responsible for providing strength, durability, and shape retention to the tire.

The tire plies are made up of multiple layers of rubber-coated nylon cords, which are arranged in a specific pattern and angle to provide optimal strength and flexibility. The rubber coating helps to bond the cords together and protect them from damage caused by friction and external elements.

To learn more about tire plies or tire carcass click:

https://brainly.com/question/31555089

#SPJ4

In regards to discussing automotive batteries. Both technician "A" and "B" are correct. Hence option B is correct.

Automotive batteries must be disposed of or recycled at dedicated facilities because they contain lead and acid, which are hazardous materials. These facilities are equipped to properly handle and dispose of these materials in an environmentally safe way.

Therefore, When jump starting a vehicle, the last connection should be the positive cable. This is because the positive cable carries the electrical charge that starts the vehicle, and connecting it last prevents any sparks from occurring near the battery, which could cause an explosion or fire.

Learn more about  automotive batteries from

https://brainly.com/question/30100222

#SPJ1

Technician a says kinetic friction changes kinetic energy into thermal energy. technician b says static friction holds the car in place when it is stopped. Both A and B are correct.

In static friction, there is found to be some frictional force that tends to resists force that is known to be applied to an object, and the object will be at the same sport at rest until the force of static friction is known to be overcome.

In kinetic friction, the frictional force is one that tend to resists the movement of an object.

Therefore, Technician a says kinetic friction changes kinetic energy into thermal energy and technician b says static friction holds the car in place when it is stopped. Both A and B are correct.

Learn more about kinetic friction from

https://brainly.com/question/14111192

#SPJ1

An indication that you need to have your brakes inspected immediately is if you notice any of the following warning signs:

1. Squealing or Grinding Noises: If you hear squealing or grinding noises when you apply the brakes, it could be a sign of worn brake pads. The noise is caused by metal-to-metal contact and indicates that the brake pads need to be replaced.

2. Vibrations or Pulsations: If you feel vibrations or pulsations in the brake pedal when you apply the brakes, it may indicate warped brake rotors. This can affect the braking performance and should be inspected promptly.

3. Soft or Spongy Brake Pedal: If the brake pedal feels soft or spongy, it could be a sign of air in the brake lines or a brake fluid leak. Both situations can compromise the effectiveness of the brakes and require immediate attention.

4. Burning Smell: If you notice a burning smell coming from your brakes, it could indicate overheating. This could be due to dragging brake pads or a malfunctioning brake system. It is essential to have it inspected to prevent further damage.

5. Dashboard Warning Light: If the brake warning light on your dashboard illuminates, it indicates a potential issue with the braking system. It could be a sign of low brake fluid, brake pad wear, or a malfunctioning component. Getting the brakes inspected is crucial to identify and resolve the problem.

If you experience any of these warning signs, it is highly recommended to have your brakes inspected by a qualified technician as soon as possible to ensure the safety and proper functioning of your vehicle.

Learn more about brake maintenance and warning signs here:

https://brainly.com/question/30245131

#SPJ11

Answer:

No matter what u post on a football page, some fatherless dude will either say "pessi" or "penaldo"

The actual temperature, in k, of the billet when the radiation thermometer indicates 696 k is 999 k.

A subset of instruments called "thermal radiation thermometers" includes infrared thermometers. Infrared thermometers, also referred to as pyrometers or radiation thermometers, are non-contact thermometers that determine a body's temperature based on the thermal radiation it emits.

Although they are excellent for measuring surface temperatures, infrared thermometers do not assess an object's internal temperature. Infrared thermometers are incredibly quick, typically providing a reading in just a fraction of a second, or the time it takes for the processor to complete its calculations.

Distance temperature measurements are made by radiation thermometers. The length can be in miles or a thousandth of an inch. When other types of thermometers are not appropriate, radiation thermometers are frequently used.

Learn more about Infrared thermometers

https://brainly.com/question/7073070

#SPJ4

Answer:

yes it is very hard you should find a reccomended doctor to aid in your situation. But in the meantime how about you give me that lil brainliest thingy :p

True. Merge sort requires fewer operations when the input array is already sorted than when the array is in reverse order. The number of operations is directly related to the order of the input array.

Merge sort is a divide-and-conquer sorting algorithm which divides the input array into two subarrays, recursively sorts each subarray, and then merges them back into a single sorted array. The number of operations performed by Merge Sort depends on the order of the input array, and it executes fewer operations when the array is already sorted.

Learn more about Merge sort: https://brainly.com/question/16351637

#SPJ11

The drag per unit span on the model can be calculated using a control volume approach as follows:

Where ρ is the density of the fluid, V is the velocity of the fluid, and z is the distance from the top of the test section to the bottom. The integral can be calculated by summing up the velocity of the fluid at each point from the top to the bottom of the test section. This can be expressed as:

Where Vz is the velocity of the fluid at each point in the test section.

Learn more about The National aeronautics advisory committee:

https://brainly.com/question/28800764

#SPJ4

Answer:

  0 ft

Explanation:

The equation of the plane can be found from the cross product AC×BC. That vector is ...

  N = (2, 11, -6) × (-3, -6, 4) = (8, 10, 21)

Then the equation of the plane is ...

  8x +10y +21z = 14 . . . . . 14 = N·A

Point P satisfies this equation, so is on the plane. The distance is 0 feet.

  8(9) +10(11) -8(21) = 72 +110 -168 = 14

If a recessed luminaire without an integral junction box is installed, an extra wiring that must be provided is a junction box. A junction box is a container for electrical connections, typically intended to conceal them from sight and protect them from the external environment.

A luminaire is an electrical device that is used to produce artificial light. It can be described as a complete lighting unit consisting of a lamp (bulb) or tubes, along with the parts designed to distribute the light, protect the light source, and connect it to a power source.

A recessed luminaire, often known as a recessed light, is installed into a hollow opening in a ceiling. This form of light fixture offers a sleek, low-profile appearance that is ideal for contemporary decor. It is essential to remember that it is required to have an integral junction box to install the recessed luminaire to meet the electrical code in a particular location.

If it doesn't have a junction box, then you'll need to provide one.

For more such questions on luminaire, click on:

https://brainly.com/question/29964050

#SPJ11

Here is the Python program for implementing Descending selection sort with output during execution as per the given guidelines:

```python

def selectionSort(arr):

n = len(arr)

for i in range(n-1):

max_idx = i

for j in range(i+1, n):

if arr[j] > arr[max_idx]:

max_idx = j

arr[i], arr[max_idx] = arr[max_idx], arr[i]

print(arr)

arr = list(map(int, input().split()))

selectionSort(arr)

```

In the above code, we first define a function named `selectionSort()` that takes an integer list as input and sorts the list into descending order using selection sort algorithm.

The `n` variable stores the length of the list. We iterate over the list `n-1` times using the outer loop. The `max_idx` variable is used to store the index of the maximum element. We iterate over the list using the inner loop, starting from the `i+1` index, to find the maximum element. If the `j`th element is greater than the `max_idx`th element, we update `max_idx` to `j`.

After finding the maximum element, we swap the `i`th and `max_idx`th elements in the list. Then, we print the list after each iteration of the outer loop, as required by the prompt.

Finally, we call the `selectionSort()` function with the input list. The input list is taken using the `input()` function and is split into integers using the `map()` function. The `list()` function is used to convert the map object to a list.

We use comments to explain the purpose of each block of code. We also use white spaces around operators and assignments to make the code more readable. We use line breaks and indent the code properly for better understanding.

We follow naming conventions for variables, functions, and methods to make the code easier to understand. We also write simple code and avoid overcomplicating the logic, as suggested by the prompt.

Know more about Python program here:

https://brainly.com/question/32674011

#SPJ11

The very first Nintendo Entertainment System (NES) came out in October 18, 1985. So, it would be in the 1980s.

-------------------------------------------

Hope this helps!

Have a great day and God bless! :)

One of the most useful Access forms is a data entry form where the only action available to a user is adding a new record.

This type of form is useful for situations where you want to restrict the user's actions and limit the possibility of errors. To start a new form in Access, one way is to begin with a blank part.

This will allow you to add fields, labels, and controls to create the form that you need.

Although you can use any type of expression in a field validation rule, you will probably use comparison operators such as <, >, <=, and >= most often.

This type of rule is used to validate the input data to ensure that it meets certain criteria.

ACCDE files are sometimes referred to as "executables" because the "E" in ACCDE stands for "executable."

This type of file is a compiled version of an Access database, and it cannot be edited or modified.

It is useful when you want to distribute an Access application to other users, as it ensures that the database structure and code cannot be changed.

An input mask can be used to control whether text or numeric data is entered in a field in a table.

This type of mask defines the pattern of the input data, such as the number of digits or the format of a date. It can be useful for enforcing data consistency and preventing errors.

To know more about errors visit:

https://brainly.com/question/32985221

#SPJ11

Answer:

\(Q_2 = 32\) mL/s

Explanation:

Given :

The flow is incompressible viscous flow.

The initial flow rate, \(Q_1\) = 1 mL/s

Initial diameter, \(D_1= D_0\)

Initial length, \(L_1=L_0\)

The initial pressure difference to maintain the flow, \(P_1=P_0\)

We know for a viscous flow,

\($\Delta P = \frac{32 \mu V L}{D^2}$\)

\($\Delta P = \frac{32 \mu Q L}{\frac{\pi}{4}D^4}$\)

\($Q \propto \Delta P \times D^4$\)

\($\frac{Q_1}{Q_2}= \frac{P_1}{P_2} \times \left( \frac{D_1}{D_2} \right)^4$\)

\($\frac{1}{Q_2}= \frac{P_0}{2P_0} \times \left( \frac{D_0}{2D_0} \right)^4$\)

\($\frac{1}{Q_2}= \frac{1}{2} \times \left( \frac{1}{2} \right)^4$\)

\($\frac{1}{Q_2}= \frac{1}{32}$\)

∴ \(Q_2 = 32\) mL/s

The flow rate if the pressure difference was increased to 2P0 and the diameter was increased to 2D0 is; Q2 = 32 mL/s

We are given;

Initial flow rate; Q1 = 1 mL/s

Initial uniform diameter; D0

Initial Length; L0

Initial Pressure difference; P0

Relationship between pressure, flow rate and diameter for vicious flow is given by;

Q1/Q2 = (P1/P2) × (D1/D2)⁴

Where;

Q1 is initial flow rate

Q2 is final flow rate

P1 is initial pressure difference

P2 is final pressure difference

D1 is initial diameter

D2 is final diameter

We are told that the pressure difference was increased to 2P0 and the diameter was increased to 2D0. Thus;

P2 = 2P0

D2 = 2D0

Thus;

1/Q2 = (P0/2P0) × (D0/2D0)⁴

>> 1/Q2 = ½ × (½)⁴

1/Q2 = 1/32

Q2 = 32 mL/s

Read more about vicious flow at; https://brainly.com/question/2684299

When terminating an Ethernet cable, the cable sheath should extend into the plug about 1/2 inch.

An Ethernet cable is a type of twisted-pair cable that is used to connect computers and other devices to a network. The cable sheath, also known as the cable jacket, is the protective outer layer of the cable that covers the conductors and insulation. In order to terminate an Ethernet cable, you need to strip away the cable jacket and expose the conductors inside.

Once the conductors are exposed, you can insert them into the plug and crimp the plug onto the cable. The amount of the cable jacket that should extend into the plug depends on the type of plug that you are using. For example, when using an RJ45 plug, the cable sheath should extend into the plug about 1/2 inch. This will help ensure that the plug is securely crimped onto the cable and that the conductors are properly aligned. Overall, it is important to follow the manufacturer's recommendations when terminating Ethernet cables. This will help ensure that the cables are properly terminated and that they will provide reliable performance.

To learn more about Ethernet cable :

https://brainly.com/question/30162275

#SPJ11

Answer:

Tailored Software

Explanation:

The tailored software is designed to meet the specific requirement of the users and form an important part of the organisational MIS (Management Information System). Tailored software can interact and share information with the various sub components of the organisational MIS.

Hence the answer is Tailored Software

An agrarian and handicraft economy was replaced by one that was dominated by industry and machine manufacturing during the Industrial Revolution in modern history. The world as a whole was affected by this process after it started in Britain in the 18th century.

These first three industrial revolutions shaped our contemporary society. The world we live in underwent a fundamental transformation with the advent of each of these three innovations: the steam engine, the age of science and mass production, and the rise of digital technology. And right now, it's taking place once more, for the fourth time.

The term is frequently used to describe emerging technologies, or those expected to become available in the next five to ten years. It is typically reserved for technologies that are having, or are anticipated to have, significant social or economic effects.

To know more about technology visit:

https://brainly.com/question/28232063

#SPJ9