The effect of differential ailerons in a turn will be reduced induced drag on the inner and outer wings. Differential ailerons are a control surface used to reduce the adverse yaw that occurs when an airplane rolls. Adverse yaw is the tendency of the airplane to yaw or turn in the opposite direction of the desired turn when the ailerons are used.
option B is correct
Differential ailerons work by decreasing the amount of deflection on the aileron of the wing that is rising, and increasing the deflection on the aileron of the wing that is lowering. This creates more lift on the wing that is lowering, and less on the wing that is rising. As a result, the airplane rolls with less adverse yaw and a more efficient turn. The reduction in adverse yaw also means that the airplane requires less rudder input, reducing drag and allowing the airplane to maintain speed and altitude more effectively. Therefore, the effect of differential ailerons in a turn will not produce increased profile drag on the inner wing or produce equal form drag on the inner and outer wings, as the ailerons are only affecting the lift distribution between the wings. However, it will reduce drag on both wings due to the reduction in adverse yaw and the decreased need for rudder input. option B is correctFor such more question on airplane
https://brainly.com/question/25216102
#SPJ11
A circuit breaker often serves the same purpose as a Question 3 options:
A battery
B fuse.
C capacitor.
D All of the above choices are correct.
E None of the above choices are correct.
A circuit breaker serves the same purpose as a fuse. The main answer is: Option B - Fuse.
A fuse is a safety device that protects electrical circuits from overcurrent conditions by breaking the circuit when an excessive current flows through it. Similarly, a circuit breaker is designed to automatically interrupt the electrical circuit when it detects an overload or short circuit. Both the fuse and circuit breaker act as protective devices to prevent damage to the electrical system and equipment. Therefore, the correct option is B - Fuse.
You can learn more about circuit breaker at
https://brainly.com/question/30715455
#SPJ11
Question 14 of 28 You have an Azure Storage account named storage1. You create the following encryption scopes for storage1: • Scope1 that has an encryption type of Microsoft-managed keys • Scope2 that has an encryption type of Customer-managed keys Which storage services can be used with Scope2? Select only one answer. blob only file only blob and file only table and queue only blob, file, table, and queue
Note that the Azure storage services that can be used with Scope 2 are: "blob, file, table, and queue" (Option 5)
What is Azure storage services?On a subscription basis, these storage services offer a multi-tenant storage environment best suited for unstructured data. Data is kept at the data centers of the service provider, with storage data dispersed across many countries or continents.
Microsoft's Azure Storage platform is a cloud storage solution for current data storage scenarios. Azure Storage provides highly accessible, massively scalable, durable, and secure cloud storage for a wide range of data items.
Most businesses will employ many types of storage. They are as follows:
Azure Blob Storage.Azure StorageQueue Storage in AzureAzure Table Azure Managed Disks.Azure Storage provides highly accessible, massively scalable, durable, and secure cloud storage for a wide range of data items. A REST API makes Azure Storage data items available from anywhere in the globe over HTTP or HTTPS.
Learn more about Azure storage services:
https://brainly.com/question/28944048
#SPJ1
Full Question:
You have an Azure Storage account named storage1.
You create the following encryption scopes for storage1:
Scope1 that has an encryption type of Microsoft-managed keysScope2 that has an encryption type of Customer-managed keysWhich storage services can be used with Scope2? Select only one answer.
blob onlyfile onlyblob and file onlytable and queue onlyblob, file, table, and queueApart from replacement and displament deep foundations,
1. whats a third soloution and
2 method of installation ,
3. advantages, disadvantages
4. how it is connected to the foundation, then describe the role this connection plays resisting forces (e.g. lateral restraint, and others)
Alternative deep foundation: helical piles. Installed with torque, ideal for limited access sites, vibration-free. Resist lateral forces.
What is the explanation for the above response? The third solution for deep foundations is the use of micropiles.Micropiles are typically installed using a drilling rig, and the process involves drilling a small diameter hole (usually less than 30 cm) into the ground and then filling it with a high-strength grout material, followed by the installation of a steel reinforcing element.Advantages of using micropiles include their ability to be installed in low headroom areas, the ability to be installed in difficult soil conditions, and their low noise and vibration during installation. However, their load carrying capacity is typically lower than that of traditional piles, and their installation can be more expensive than other deep foundation solutions.Micropiles are connected to the foundation through a pile cap or a concrete footing, which transfers the load from the structure to the micropiles. The connection between the micropiles and the foundation provides lateral restraint and resists forces such as wind and earthquake loads. The micropiles can also provide uplift resistance, as they are typically installed at an angle to increase their effective length and capacity.Learn more about deep foundations at:
https://brainly.com/question/29341501
#SPJ1
All of these are part of the seat belt assembly EXCEPT the:
O latch plate
O D-ring
O retractor.
O cushion
I want to draw a monster should i do it on my free time and if you want to give me ideas.
Answer:
yes
Explanation:
an idea could be a jack o lantern monster since it Halloween tomorrow
A single crystal of a metal that has the FCC crystal structure is oriented such that a tensile stress is applied parallel to the [100] direction. If the critical resolved shear stress for this material is 1.98 MPa, calculate the magnitude of applied stress necessary to cause slip to occur on the (111) plane in the direction.
Answer:
the magnitude of the stress necessary to cause slip to occur on the (111) plane in the \([1 0 \overline 1]\) direction is 4.85 MPa
Explanation:
From the given information;
To determine the angle \(\phi\) between the direction [100] and [111]; we have:
\(\phi = cos ^{-1} [\dfrac{u_1u_2+v_1v_2+w_1w_2}{ \sqrt{(u_1^2+v_1^2+w_1^2) (u_2^2+v_2^2+w_2^2) }}}\)
where;
[u₁,v₁,w₁] and [u₂, v₂, w₂] are directional indices.
replacing 1 for u₁ , 0 for v₁ and 0 for w₁ ;
also replacing 1 for u₂, 1 for v₂ and 1 for w₂ ; we have :
\(\phi = cos ^{-1} [\dfrac{1*1+0*1+0*1}{ \sqrt{(1^2+0^2+0^2) (1^2+1^2+1^2) }}}\)
\(\phi = 54.7^0\)
To determine the angle \(\lambda\) for the slip direction \([1 0 \overline 1]\)
\(\lambda= cos ^{-1} [\dfrac{u_1u_2+v_1v_2+w_1w_2}{ \sqrt{(u_1^2+v_1^2+w_1^2) (u_2^2+v_2^2+w_2^2) }}}\)
replacing 1 for u₁ , 0 for v₁ and 0 for w₁ ;
also replacing 1 for u₂, 1 for v₂ and -1 for w₂ ; we have :
\(\lambda = cos ^{-1} [\dfrac{1*1+0*0+(0*-1)}{ \sqrt{(1^2+0^2+0^2) (1^2+0^2+(-1^2)) }}}\)
\(\phi = cos ^{-1} [\dfrac{1}{\sqrt{2}}]\)
\(\lambda = 45^0\)
The yield strength for the slip process \([1 0 \overline 1]\) can now be calculated as:
\(\sigma_x = \dfrac{t_{xr}}{cos \phi \ \ cos \lambda}\)
where
\(t_{xr}\) = 1.98 MPa
\(\sigma_x = \dfrac{1.98}{cos 54.7^0 \ \ cos 45}\)
\(\sigma_x = \dfrac{1.98}{0.5779 *0.7071}\)
\(\mathbf{\sigma _x = 4.85 \ MPa}\)
Hence, the magnitude of the stress necessary to cause slip to occur on the (111) plane in the \([1 0 \overline 1]\) direction is 4.85 MPa
which action is an example of how engineering affects science.
A) Identifying ways to improve the design of an infrared camera.
B) Designing an infrared camera that can record animal behavior in darkness.
C) Using observations of predators to from a hypothesis about their behavior.
D) Testing the effect if infrared light on the behaviors of nighttime predators.
Answer:It was B
Explanation:i took it on apec
and got A wrong so it told it was B
The action that is an example of how engineering affects science is designing an infrared camera that can record animal behavior in darkness. The correct option is B.
What is engineering?Engineering is the process of using mathematical and scientific principles to solve issues in the real world and create novel products and processes for use in a variety of fields and applications.
Engineering is the use of science and math to address issues. Engineers analyze how things operate and use scientific discoveries in real-world settings.
Strong problem-solving skills are among the most important traits an engineer can have. A substantial portion of an engineer's duties involve analyzing a situation, spotting issues, and then coming up with solutions.
Designing an infrared camera that can capture animal behavior in the dark is an example of how engineering influences research.
Thus, the correct option is B.
For more details regarding engineering, visit:
https://brainly.com/question/19117846
#SPJ2
a transformer is built with 200 primary turns and 50 secondary turns. Whats the transformers turn rate? A) 1:4 B) 2:1 C) 1:2 D) 4:1
Answer:
\(4:1\)
Explanation:
\(N_p\) = Number of turns of primary coil = 200
\(N_s\) = Number of turns of secondary coil = 50
The transformer turn ratio is given by
\(\dfrac{N_p}{N_s}=\dfrac{200}{50}\)
\(\Rightarrow \dfrac{N_p}{N_s}=\dfrac{4}{1}\)
\(\Rightarrow \dfrac{N_p}{N_s}=4:1\)
The transformer turn ratio is \(4:1\).
unless otherwise posted, the speed limit in business and residential areas is ____ mph.
Unless otherwise posted, the speed limit in municipal, business, or residential areas is 30 mph.
What is speed limit?Most nations' speed restrictions on road traffic establish the legal maximum speed at which cars may drive on a certain stretch of road. Speed restrictions are often displayed on traffic signs and represent the maximum allowable speed, which is stated in kilometres per hour and/or miles per hour. There are two types of speed limitations in general. Signs located along the route reflect posted speed restrictions. When the nature of road influences baseline speed restrictions, statutory speed limitations are established.
Here,
Unless otherwise marked, the speed limit in municipal, commercial, and residential zones is 30 miles per hour.
To know more about speed limit,
https://brainly.com/question/24183001
#SPJ4
Unless otherwise posted, the speed limit in business and residential areas is typically 25 mph. However, it's worth noting that local and state laws can vary, so it's always a good idea to check for posted signs or consult local regulations to be sure.
In most places, the speed limit in business and residential areas is 25 mph, which is considered a safe speed for densely populated areas with a high volume of pedestrians, bicyclists, and vehicles. However, different states and municipalities may have different laws and regulations, so it's always a good idea to check for posted speed limit signs or consult local authorities to confirm the speed limit in a specific area. Additionally, drivers should always drive at a speed that is safe for the road conditions and traffic, regardless of the posted speed limit.
Find out more about Speed
brainly.com/question/10561161
#SPJ4
When a technician is ohming out a load in a circuit, what reading should the technician get if the load is good
When a technician is ohming out a load in a circuit, the reading that the technician should get if the load is good is some numbers.
What does Ohming out a circuit mean?The term “Ohming out a motor” is known to be the act of measuring the electrical resistance that is present in the motor windings and comparing it with the normal values.
Note that When a technician is ohming out a load in a circuit, the reading that the technician should get if the load is good is some numbers as it will tell if there is a measure of comparison or not.
Learn more about technician from
https://brainly.com/question/2328085
#SPJ1
a typical information system will have which of these? (select all that apply, omit those that do not) a) somewhere to store data (often in the form of a database) b) a user interface where commands can be issued and results received c) a program to help use the data d) software to convert knowledge into data
Computer equipment Computer software is an example of physical technology that deals with data. The software's function is to instruct the hardware on what to do in the context of telecommunications.
Human resources and procedures, databases, and data warehouses. Operational, management, and strategic level systems are the three basic kinds of information systems that cater to various organizational levels. Information systems carry out tasks like collecting input data, storing it, processing it, and finally producing output data. The components of a system are not isolated from one another; rather, they are intertwined and have an impact on one another. To accomplish the system's objective, every component is arranged in a particular way. In a bigger system, a system will have a specific role to play. System feedback exists.
To know more about Humans from the given link
https://brainly.com/question/20260001
#SPJ4
how to calculate the factor of your grade safety. explain
Answer:
To divide the ultimate (or maximum) stress by the typical (or working) stress.
Explanation:
Hopes this helps :)
Ngaire was working on equipment that had been locked and tagged out. She was in a hurry and really tired)
so didn't check that stored energy had been safely released. She had all her PPE on so felt pretty safe as it
was only steam in the pipe.
A senior operator was supposed to do the job with her helping as she wasn't trained, but was called away
She had seen him do it before and wanted to help.
As she worked, steam burst out from a valve burning her left arm and narrowly missing her face. She ended
up with 2nd degree burns which became infected so she is off work for 5 weeks.
1. What were the hazard(s) and risk(s)?
Hazard:
Risk:
2. What was the worst thing that could have happened?
3. What Safety Rules should have been followed?
4. What Tools could have prevented this incident and HOW?
5. What would you have done differently?
6. What do you think is the most important thing that should have been done or
not done?
Hazard: Stored energy in the locked and tagged out equipment (steam in the pipe).
Risk: Failure to release stored energy leading to a sudden steam burst and resulting burns.
What is the worst thing to happen?The worst thing that could have happened is Ngaire sustaining more severe burns, potentially affecting her face or causing life-threatening injuries.
Safety Rules that should have been followed:
a. Always ensure stored energy is safely released before working on equipment.
b. Only perform tasks for which one is properly trained and authorized.
c. Do not rush or take shortcuts when it comes to safety procedures.
Tools that could have prevented this incident:
a. Lockout/tagout devices: These tools ensure that energy sources are isolated and equipment cannot be operated.
b. Verification checklist: A documented process to confirm that stored energy has been released before commencing work.
What could have been done differently:
Ngaire should not have attempted to work on the equipment without proper training and authorization. She should have waited for the senior operator or sought assistance from another trained individual.
The most important thing that should have been done:
Ngaire should have prioritized her safety and followed established procedures, including verifying that stored energy was safely released. Taking shortcuts or disregarding safety protocols can lead to serious incidents and injuries.
Read more about safety precautions here:
https://brainly.com/question/14367881
#SPJ1
Building high-morale organizations and building communication networks that include employees are both elements ofA) ISO 9000 certification.B) Six Sigma certification.C) employee empowerment.D) the tools of TQM.
C) Building high-morale organizations and building communication networks that include employees are both elements of employee empowerment.
Giving employees the power, responsibility, and autonomy to take charge of their own decisions and find solutions is a process known as employee empowerment. Only when an organisation has confidence in a worker's capacity for making decisions is it feasible. The organisation helps people by providing the tools they need to follow through on these choices. They don't have management or their direct supervisors controlling or interfering with their work. Employees are more likely to take ownership of their duties, become more responsible, and put forth more effort to reach their objectives when an organisation gives them greater control.
To know more about employee empowerment:
https://brainly.com/question/24113378
#SPJ4
help protect the lower legs and feet from heat hazards like molten metal and welding sparks
Answer:
i think its called leggings thats wut my shop teacher told me
Explanation:
Which of the following statements is true?
1. A class can have many direct super classes.
2. A class can have multiple subclasses.
3. A class can extend multiple classes.
a. I only
b. II only
c. III only
d. I and II only
e. II and III only
The following statement is true: b. II only
A class is a user-defined data type that is defined using a keyword like class. The class provides a blueprint for objects that have identical behavior. The objects in a class are called instances, and each class instance may have distinct states due to the differences in their data fields. A class can have many direct superclasses statement is false. A single class can only have one direct superclass, which is the class from which it inherits characteristics. A direct superclass is a superclass that is situated just above the subclass in the hierarchy.A class can extend multiple classes statement is also false. A class may extend another class, but it can only extend one other class, indicating that it can have one direct superclass.A class can have multiple subclasses, statement is true. The subclasses are derived from the superclass. It refers to the phenomenon in which multiple classes inherit from the same superclass. Subclassing is a technique for creating a new class that incorporates or adapts an existing class's features.Therefore, the correct answer is b. II only. (2. A class can have multiple subclasses.)
To learn more about "subclasses", visit: https://brainly.com/question/31270127
#SPJ11
pls discuss the concepts in which architectural forms/visuals correlate in the design process
Answer:
Visual connectivity refers to the tangible aspects of a space; extent to which a place can be viewed from other places. It is believed that the design properties of a spatial layout of an atrium leaves unobstructed views horizontally and vertically.
Explanation:
You are terminating a 750 kcmil aluminum conductor to a copper or bronze pad. Which of the following is a material or component that you will need.
One two-hole plated aluminum compression lug
two steel or bronze bolts
four flat steel washers
two steel nuts
two steel Belleville washers
Listed joint compound
Silicon spray
When terminating a 750 kcmil aluminum conductor to a copper or bronze pad, One two-hole plated aluminum compression lug, two steel or bronze bolts, four flat steel washers, two steel nuts, two steel Belleville washers, Listed joint compound are required.
1)One two-hole plated aluminum compression lug: This lug is specifically designed to securely connect the aluminum conductor to the copper or bronze pad.
It provides a reliable electrical connection while accommodating the differences in material properties between aluminum and copper/bronze.
2)Two steel or bronze bolts: These bolts are used to fasten the aluminum compression lug to the copper or bronze pad.
They ensure a tight and secure connection.
3)Four flat steel washers: These washers are placed between the aluminum compression lug and the bolts.
They provide a flat, even surface and help distribute the pressure evenly during the tightening process.
4)Two steel nuts: These nuts are threaded onto the bolts to secure the connection.
They are tightened against the washers to ensure a stable and robust joint.
5)Two steel Belleville washers: Belleville washers are conical-shaped washers that provide a spring-like action.
They can be used in this scenario to maintain the required tension and prevent loosening of the connection over time.
6)Listed joint compound: A listed joint compound, typically an anti-oxidant compound, is used to coat the aluminum conductor before making the connection.
It helps reduce oxidation and corrosion, improving the longevity and performance of the termination.
For more questions on aluminum conductor
https://brainly.com/question/13495387
#SPJ8
Report of invertor to convert 12 volt to 220 volt.
FILL IN THE BLANK. when looking over the suspension system you need to check for cracked loose or______
When looking over the suspension system you need to check for cracked loose or broken spring hangers, damaged torque rods, damaged u-bolts.
What is the suspension system?When looking over the suspension system of a vehicle, it is important to check for any signs of wear or damage, such as cracked, loose, or damaged parts. The suspension system is responsible for supporting the weight of the vehicle, maintaining tire contact with the road, and providing a smooth ride.
Therefore, Any damage to the suspension system can affect the handling, stability, and safety of the vehicle, so it's important to address any issues as soon as possible. Regular inspection and maintenance of the suspension system can help identify potential problems before they become more serious.
Learn more about suspension system from
https://brainly.com/question/23185310
#SPJ1
How is the law of conservation of matter best represented in a chemical reaction
Answer:
Umm.... because the spit that comes up of your mouth when you talk mixes with the air
Explanation:
2.8 For Fig.
2−30
a-d, find all equivalent resistances (Req): (a) (b) (c) Fig. 2-30 (d) (e) 2.9 For Fig. 2-31 a-d, find all equivalent resistances (Req): Fig. 2-31 (a) (c) (d)
2.10
Attach a
10 V
load to the terminals and find the voltage and current across each resistor in the above circuits of Fig.
2−31
. This work is licensed under a Creative Commons Attribution
4.0
International License.
The right response is to Consider Figure 1, which shows the electric field lines of a solitary positive point charge. An electric field line that is produced by a positive charge.
Radiation from RF (radio frequency) waves is produced by all computers. There is no proof that they are harmful unless the intensity is high enough to warm tissue (like a microwave oven). You are not putting yourself in danger if you use your computer for more than four hours each day (from radiation). Computers emit electromagnetic radiation into the environment. In particular, electromagnetic radiation that is visible light is produced. It is also possible for computers to produce other forms of electromagnetic radiation, such as radio waves, ultraviolet light, and infrared light, depending on the components of the device. Avoid using them an hour before going to bed. Even though it may be in your bedroom, you are under no obligation to use it.
Learn more about Electromagnetic radiation here:
https://brainly.com/question/30694959
#SPJ4
A function is different from a procedure because a functiondoes not contain a set of instructions.can have only a limited number of steps.returns a value.is mathematical.
Answer: A function returns a value and a procedure just executes commands.
Explanation:
Answer:
c - returns a value.
Explanation:
on edge pls mark brainiest
When the process is in control but does not meet specification which type of error is it?
When the process is in control but does not meet specification, it is referred to as a special cause error.
What is the term for a process in control but not meeting specification?In statistical process control, a process is considered to be in control when it operates within the defined limits and shows only random variations. However, when a process is in control but does not meet the desired specifications, it indicates the presence of a special cause error.
Special cause errors are attributed to specific factors or events that cause the process to deviate from the expected outcome. These errors are typically unpredictable and require investigation and corrective action to bring the process back within the desired specifications.
Read more about control error
brainly.com/question/16230467
#SPJ1
technician a says that hydrogen exists by itself in nature. technician b says that hydrogen has better specific energy than fossil fuels. which technician is correct?
Technician b says that hydrogen has better specific energy than fossil fuels. so technician b is correct.
Does hydrogen have the highest specific energy?Although hydrogen has the highest energy density per mass of any fuel, it has the lowest energy density per unit volume due to its low ambient temperature density, necessitating the development of new storage technologies with the potential for higher energy density.Hydrogen is utilized as a rocket fuel and in fuel cells to generate power on some spacecraft because it is beneficial as an energy source or fuel due to its high energy content per unit of weight.Since hydrogen has a significantly higher energy content than fossil fuels, less of it is required to carry out any given task.To learn more about energy refer to:
https://brainly.com/question/25959744
#SPJ4
Relative to the direction of an applied shear stress, the direction of motion of a screw dislocation's line is
The direction of motion of a screw dislocation's line is perpendicular to the applied shear stress.
In a screw dislocation, the atoms are displaced along a helical path around the dislocation line, resembling a screw thread. When an external shear stress is applied, it acts parallel to the dislocation line.
Due to the Burgers vector, which represents the magnitude and direction of the lattice distortion caused by the dislocation, the atoms move along the helical path in a direction perpendicular to the applied shear stress.
This motion allows the screw dislocation to propagate and contribute to plastic deformation in crystalline materials.
Learn more about screw dislocation here
https://brainly.com/question/32163867
#SPJ4
A laminated steel ring is wound with 3000 turns. When the magnetism current varies between 7 and 9 A, the magnetic flux varies between 860 and 900Nwb, calculate the incremental inductance of the coil over this range of current variation
Answer:
60000 H
Explanation:
We are given;
Number of turns; N = 3000 turns
Change in flux = 900 - 860 = 40 Wb
Change in current = 9 - 7 = 2 A
Now, the formula for incremental inductance is given as:
L = N(Change in flux/Change in current) where;
N is Number of turns
Plugging in the relevant values, we have;
L = 3000(40/2)
L = 60000 H.
A multilane highway has 4 lanes (2 lanes in each direction) and measured FFS of 60 mi/h. The directional peak-hour volume is 1300 vehicles (the peak hour factor is 0.81). One upgrade is 5.5% and is 0.625 mi long. Currently, heavy vehicles are not permitted on the highway, but local authorities are considering allowing heavy vehicles on this upgrade. If this is done, they estimate that 83 heavy vehicles will use the highway during the peak hour and that 50% will be SUT, 50% TT. What would the LOS be before and after the heavy vehicles are allowed on the upgrade?
For a multilane highway having 4 lanes (2 lanes in each direction) and measured FFS of 60 mi/h, LOS before allowing heavy vehicles is A or B and LOS after allowing heavy vehicles is A or B.
To determine the Level of Service (LOS) before and after heavy vehicles are allowed on the upgrade, we need to calculate the traffic parameters and compare them to the LOS thresholds. Here's the step-by-step calculation:
Before allowing heavy vehicles:
Directional Peak-Hour Volume (D): 1300 vehicles (given)
Peak Hour Factor (PHF): 0.81 (given)
Total Volume during peak hour (V) = D * PHF = 1300 * 0.81 = 1053 vehicles/hour
Capacity (C) = 4 lanes * FFS * lane capacity = 4 * 60 * 1800 vehicles/hour = 43200 vehicles/hour
Volume-to-Capacity Ratio (V/C ratio) = V / C = 1053 / 43200 ≈ 0.024
LOS is determined based on the V/C ratio. Referring to LOS charts or tables, a V/C ratio of 0.024 corresponds to LOS A or B.
After allowing heavy vehicles:
Number of Heavy Vehicles during peak hour (HV) = 83 vehicles (given)
Split between Single Unit Trucks (SUT) and Tractor-Trailers (TT) = 50% each
SUT = 0.5 * HV = 0.5 * 83 = 41.5 ≈ 42 vehicles
TT = 0.5 * HV = 0.5 * 83 = 41.5 ≈ 42 vehicles
Adjusted Volume during peak hour (V_adj) = V + SUT = 1053 + 42 = 1095 vehicles/hour
Adjusted V/C ratio = V_adj / C = 1095 / 43200 ≈ 0.025
Referring to LOS charts or tables, a V/C ratio of 0.025 corresponds to LOS A or B.
Therefore, both before and after allowing heavy vehicles on the upgrade, the Level of Service (LOS) would remain the same, either LOS A or B.
To learn more about multilane highways visit:
https://brainly.com/question/15735198
#SPJ11
Implement the following Matlab code:
x=zeros(10,128);
t1=[0:1/128:1-1/128];
z=cos(2*pi*2*t1);
x(1,:)=z;
x=reshape(x,1,1280);
figure(1);
plot(x)
Examine Figure 1 – what does it “look like”? Zoom in. Take the FFT of x and explain what you see.
Manipulate the FFT and perform the IFFT to create a signal which is a continuous (i.e. no interpolating zeroes) sinusoid in the “time” domain. Explain the amplitude of the sinusoid.
The amplitude of the sinusoid is 28384 *x soít cos.
What is amplitude?Amplitude is defined as the greatest deviation from equilibrium of a point on a vibrating body or wave in terms of displacement or distance traveled. In most cases, amplitude is calculated by looking at a wave graph and determining the height of the wave from rest. The strength or intensity of the wave is gauged by its amplitude.
Sinusoid is defined as a signal with sine wave characteristics. In the liver, spleen, and bone marrow, sinusoids and irregular tubules transport blood in place of venules and capillaries. The sine or cosine functions from trigonometry form the foundation of sinusoidal signals, which are periodic functions.
Thus the amplitude of the sinusoid is 28384 *x soít cos.
To learn more about amplitude, refer to the link below:
https://brainly.com/question/8662436
#SPJ2
An automobile having a mass of 1100 kg initially moves along a level highway at 120 km/h relative to the highway. It then climbs a hill whose crest is 80 m above the level highway and parks at a rest area located there. Use a reference with kinetic and potential energy each equal to zero for the stationary highway before the hill. Let g = 9.81 m/s^2.
For the automobile, determine its change in kinetic energy and its change in potential energy, both in kJ. For the automobile, determine its change in kinetic energy, in kJ.
a. -8594
b. -663.1
c. -6.63x10^5
d. 663.1
Answer:
\(-6111.11\ \text{kJ}\)
\(863.28\ \text{kJ}\)
Explanation:
m = Mass of automobile = 1100 kg
v = Velocity of car = 120 km/h = \(\dfrac{120}{3.6}\ \text{m/s}\)
h = Height of hill = 80 m
g = Acceleration due to gravity = \(9.81\ \text{m/s}^2\)
Change in kinetic energy
\(KE=\dfrac{1}{2}m(u^2-v^2)\\\Rightarrow KE=\dfrac{1}{2}\times 1100\times (0-(\dfrac{120}{3.6})^2)\\\Rightarrow KE=-611111.11\ \text{J}\)
Change in kinetic energy is \(-6111.11\ \text{kJ}\)
Change in potential energy is given by
\(PE=mgh\\\Rightarrow PE=1100\times 9.81\times 80\\\Rightarrow PE=863280\ \text{J}\)
The change in potential energy is \(863.28\ \text{kJ}\).