The release of a large amount of sewage and other organic wastes into a river would likely result in a sharp:_______

Answer:

. Increasing the volume of the container

Explanation:

Answer:

"The number of electrons in an atom's outermost valence shell governs its bonding behaviour."

Explanation:

Credits to:

https://socratic.org/questions/how-do-valence-electrons-affect-chemical-bonding

Make sure to put in your own words

Hopefully this helps

Answer:

The number of electrons in an atom's outermost valence shell governs its bonding behaviour. ... They need to lose only one or two valence electrons to form positive ions with an s²p⁶ configuration. NONMETALS. Nonmetals tend to attract additional valence electrons to form either ionic or covalent bonds.

The ranking of bonds by increasing price volatility (duration) is as follows:

2) 4,2,1,3

This means that option 2 ranks the bonds in the correct order of increasing price volatility.

The duration of a bond measures its sensitivity to changes in interest rates. Generally, bonds with longer durations are more sensitive to interest rate changes and exhibit greater price volatility.

In the given ranking, the bond with the lowest price volatility (shortest duration) is bond 4, followed by bond 2, bond 1, and bond 3. This implies that bond 4 is the least affected by interest rate changes and has the lowest price volatility, while bond 3 is the most sensitive to interest rate changes and has the highest price volatility.

The ranking is based on the understanding that longer-term bonds tend to have higher durations and are more susceptible to price fluctuations due to changes in interest rates, while shorter-term bonds have lower durations and exhibit lower price volatility.

learn more about bonds here:

https://brainly.com/question/28299101

#SPJ11

I believe gases do not have a definite shape, color, or texture.

A solid has definite volume and shape, a liquid has a definite volume but no definite shape, and a gas has neither a definite volume nor shape

So the answer is a gas

Answer: 4 moles of water

Explanation:

Answer:

1-no reaction

2magnesium sulphate

3 magnesium sulphate

4 zinc sulphate

5 no reaction

6 zinc sulphate

7 no reaction

8no reaction

9 iron2 sulphate

10 no reaction

11 no reaction

Explanation:

Reactive metals displace least reactive metals but the least can't displace a more reactive metal than itself

There really are 17 electrons and 20 neutrons.

The atom's negatively charged particles are called electrons. The total negative charge of an electron's electrons counteracts the dipole moment of its protons there in atomic nucleus. The electron is a very little particle related to all of the other parts of the atom.

Briefing:

The mass number for the above is 37.

The atomic number is simply the quantity of protons or electrons in an atom.

So ..

Electrons: 17

Atomic mass divided by atomic number equals neutron number.

Put the values in, then.

37 — 17 = 20 .

Therefore , the number of neutrons is 20.

To know more about electrons  visit:

https://brainly.com/question/28977387

#SPJ4

Answer:

Freedom is when everyone tells you to wear your mask, but if you dont feel like it, you choose to not wear your mask. Even though you have the choice between getting the infection or not, you can still choose to get the virus.

Explanation:

Answer:

42. The statement is "The value of ΔH° for the overall reaction is large and negative".

43. The value of the enthalpy change is -93kJ.

Explanation:

42. The Kp depends on the ΔH° as both are related by ΔG formula, so the statement that identifies the reason of Kp value is "The value of ΔH° for the overall reaction is large and negative".

If ΔH° is negative, then the calculation of Kp will be a large number, because the formula of Kp is:

43. To calculate the value of the enthalpy change per mole of HCl produced, it is necessary to write the whole final reaction from the reactions in steps 1, 2 and 3 (multiplying or dividing the enrgies, just like the equations). Then, we have to sum all the final energies:

In this case, it is not necessary to multiply or divide the equations, because each H cancels, and each Cl cancels as well.

-186 kJ is the enthalpy change for the whole reaction, where 2 moles of HCl are produced. So, to calculate the enthalpy change for 1 mole of HCl, we have to divide it by 2.

Finally, the value of the enthalpy change is -93kJ.

Explanation:

Calamine solution contains zinc carbonate and is basic in nature. When applied in the skin, it reacts with the acid, and neutralizes its effect, thus giving relief.

The pH of the solution is 13.77. To find the pH of the solution, we need to first determine the concentration of hydroxide ions (OH-) in the solution. Since the balanced equation for the dissociation of Ba(OH)2 is:
Ba(OH)2 → Ba2+ + 2OH-

We can see that for every 1 mole of Ba(OH)2 that dissociates, 2 moles of OH- are produced. Therefore, the concentration of OH- in the solution is:
[OH-] = 2 x [Ba2+] = 2 x 0.294 M = 0.588 M
Now, we can use the relationship between the concentration of OH- and the pH of the solution to find the pH:
pOH = -log[OH-] = -log(0.588) = 0.23
pH = 14 - pOH = 14 - 0.23 = 13.77
Therefore, the pH of the solution is 13.77.

To know more about pH of the solution refer here:

https://brainly.com/question/30934747

#SPJ11

The mass of iron(III) chloride that contains 2.35×10²³ chloride ions can be calculated using the molar mass and stoichiometry of iron(III) chloride.

To calculate the mass of iron(III) chloride, we need to use the molar mass and stoichiometry. The molar mass of iron(III) chloride (FeCl₃) can be calculated by adding the atomic masses of iron (Fe) and three times the atomic mass of chlorine (Cl). The atomic mass of iron is 55.845 g/mol, and the atomic mass of chlorine is 35.453 g/mol.

Molar mass of FeCl₃ = 55.845 g/mol + 3 * 35.453 g/mol = 162.204 g/mol

From the balanced chemical equation of iron(III) chloride, we know that each formula unit of FeCl₃ contains three chloride ions (Cl⁻). Therefore, the ratio of chloride ions to iron(III) chloride is 3:1.

Given that there are 2.35×10²³ chloride ions, we can calculate the moles of iron(III) chloride using the mole ratio:

Moles of FeCl₃ = (2.35×10²³ chloride ions) / (3 chloride ions/1 FeCl₃)

            = (2.35×10²³) / 3 moles

Finally, we can calculate the mass of iron(III) chloride using the moles and molar mass:

Mass of FeCl₃ = Moles of FeCl₃ * Molar mass of FeCl₃

Substituting the values, we can find the mass of iron(III) chloride containing 2.35×10²³ chloride ions.

To know more about stoichiometry refer here:

https://brainly.com/question/28780091#

#SPJ11

The value of Ksp for Ba3(PO4)2 can be calculated using the molar solubility of the salt in water at 25°C, which is given as 1.4x10^(-8) mol / L.


Ksp is the solubility product constant, which is the product of the concentrations of the ions in a saturated solution of a salt at a specific temperature. The balanced equation for the dissociation of Ba3(PO4)2 in water is:

Ba3(PO4)2(s) ⇌ 3 Ba2+(aq) + 2 PO4^3-(aq)

Since the stoichiometry of the reaction shows that 3 moles of Ba2+ ions are produced for every mole of Ba3(PO4)2 dissolved, the concentration of Ba2+ ions can be calculated as follows:

[Ba2+] = 3 × molar solubility = 3 × 1.4x10^(-8) mol / L = 4.2x10^(-8) mol / L

Similarly, the concentration of PO4^3- ions can be calculated as:

[PO4^3-] = 2 × molar solubility = 2 × 1.4x10^(-8) mol / L = 2.8x10^(-8) mol / L

Therefore, the value of Ksp for Ba3(PO4)2 can be calculated by multiplying the concentrations of the ions raised to their stoichiometric coefficients:

Ksp = [Ba2+]^3 [PO4^3-]^2
   = (4.2x10^(-8))^3 × (2.8x10^(-8))^2
   = 3.4x10^(-46)


The value of Ksp for Ba3(PO4)2 at 25°C is 3.4x10^(-46).

To know more about molar solubility, visit;

https://brainly.com/question/28566275

#SPJ11

Answer:

Separation by density

Hope this helps

The principle of option D. Uniformitarianism states that the physical, chemical, and biological processes at work shaping the Earth today have also operated in the

Option D. Uniformitarianism is the principle stating that the physical, chemical, and biological processes at work shaping the Earth today have also operated in the geologic past. It is based on the idea that the present is the key to the past. In other words, the same natural laws that operate in the universe today have been operating since the beginning of time.

James Hutton was the first to propose this principle in the late 18th century. He suggested that the Earth was shaped by slow-acting geological forces such as erosion, sedimentation, and uplift over long periods of time. He believed that the same processes were still happening today and that they had operated in the past.

This principle is an important concept in geology because it allows scientists to interpret the Earth's history based on the processes that they observe today. By understanding how these processes work and how they have changed over time, scientists can reconstruct the history of the Earth and its environments.

Uniformitarianism has been tested and proven through many observations and experiments. For example, the study of sedimentary rocks has shown that they were formed in the past through the same processes that are observed today, such as deposition of sediment by water, wind, or ice.

Similarly, the study of volcanoes has shown that they are formed by the same processes as today, such as the movement of magma from deep within the Earth.

In conclusion, Uniformitarianism is the principle that allows us to interpret the Earth's history by observing the processes that shape it today. It is a fundamental concept in geology and has been tested and proven through many observations and experiments.

To know more about Uniformitarianism here

https://brainly.com/question/1324266

#SPJ11

The state that is reached when ions are entering solution at the same rate at which they leave solution to regenerate a solid is called solubility equilibrium.

Equilibrium is the state in a chemical system where the forward and reverse reactions occur at equal rates, resulting in no net change in the concentrations of reactants and products. In the context of ions entering and leaving a solution, this refers to a dynamic balance between the dissolution of a solid and the precipitation of the same solid.

When ions are introduced into a solution, they have the potential to dissolve and form hydrated ions, increasing the concentration of the ions in the solution. However, at the same time, the hydrated ions can also combine and precipitate as a solid, reducing the concentration of the ions in the solution. When the rate of dissolution and precipitation becomes equal, the system reaches a state of equilibrium, where the concentration of the ions remains constant over time.

In this equilibrium state, the solution and the solid are in a dynamic balance, with ions continuously entering and leaving the solution, but the overall concentration of the ions remains constant. This concept is fundamental in understanding chemical reactions and the behavior of solutions.

To learn more about solubility equilibrium, here

https://brainly.com/question/17330140

#SPJ4

Answer:

Anions are larger than their corresponding neutral atoms

Answer:

There are 20 neutrons in this atom.  

Explanation:

Answer:

3) an applied electric current

Explanation:

An electric source is used in an electrolytic cell.

Answer:

Q    Line     A

A: (a) 0 (b) 20

B: (b) 10 (c) 10

C: (c) 10 (d) 10

D: (d) 10 (e) 13

E: (e) 13 (f) 0

F: (f) 0 (g) 0

a: The velocity is whatever you need to see when you are specifically using a numberline so the answer for a is just 10

b: The velocity for this one is not as easy as the last one, its 7.

Explanation:

When you have a number line and your trying to find a numberline, you just have to subtract the smaller line to the largest number but if you are trying to find the velocity in beetween more than one thane you add the two biggest ones and subtract the smallest one and if you make a wrong move like add the biggest and smalles youll... still get the same answer so it doesnt matter really but its just easier to do the smallest one as the subtracting number just FYI. Happy spring break!

The height of the object : 600 mm

Given

d object=360 mm(object distance)

d image=90 mm(image distance)

Required

h object

Solution

focal length = f :

\(\tt \dfrac{1}{f}=\dfrac{1}{d_o}+\dfrac{1}{d_i}\\\\\dfrac{1}{f}=\dfrac{1}{360}+\dfrac{1}{90}\rightarrow f=72~mm\)

The magnification :

\(\tt M=\dfrac{d_i}{d_o}=\dfrac{90}{360}=0.25\)

\(\tt M=\dfrac{h_i}{h_o}\\\\0.25=\dfrac{150}{h_o}\rightarrow h_o=600~mm\)

Answer:

This question is asking to identify the following variables in the question;

Independent variable: COLOR OF LIGHT

Dependent variable: NUMBER OF LEAVES OF THE PLANT.

Constant: SAME SPECIES OF PLANT, SAME AMOUNT OF WATER

Explanation:

Independent variable is the variable that is changed or manipulated by the experimenter in an experiment. In this experiment, the COLOR OF LIGHT is the independent variable because it is the variable that was changed

The dependent variable is the variable that is measured in an experiment or the variable that responds to the changes made to the independent variable. In this experiment, the dependent variable is the NUMBER OF LEAVES OF THE PLANT.

The constant is the variable that is kept unchanged by the experimenter throughout the experiment. In this case, the SAME SPECIES OF PLANT, SAME AMOUNT OF WATER are the constants.

Answer:0.58 atm

Explanation:see attached photo

Answer:

\(P=0.583atm\)

Explanation:

Hello,

In this case, by using the ideal gas equation:

\(PV=nRT\)

We can compute the pressure as shown below, considering the given data and absolute temperature:

\(P=\frac{nRT}{V}=\frac{0.325mol*0.082\frac{atm*L}{mol*K}*(35+273)K}{14.08L}\\ \\P=0.583atm\)

Best regards.

The balanced equation is: 4 Fe(s) + 3 O₂(g) → 2 Fe₂O₃(s)

This equation represents the reaction between iron and oxygen to produce iron(III) oxide in the stoichiometric ratio.

The balanced equation for the reaction between iron (Fe) and oxygen (O₂) to form iron(III) oxide (Fe₂O₃) is:

4 Fe(s) + 3 O₂(g) → 2 Fe₂O₃(s)

To balance the equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation.

Starting with the iron (Fe) atoms, we have 4 Fe atoms on the left side but only 2 Fe atoms on the right side. To balance this, we place a coefficient of 2 in front of Fe₂O₃ on the right side:

4 Fe(s) + 3 O₂(g) → 2 Fe₂O₃(s)

Now, let's look at the oxygen (O) atoms. On the left side, we have 3 O₂ molecules, which means we have a total of 6 oxygen atoms. On the right side, we have 3 O atoms in Fe₂O₃. To balance the oxygen atoms, we need to have a total of 6 O atoms on the right side. We can achieve this by multiplying O₂ by 2:

4 Fe(s) + 6 O₂(g) → 2 Fe₂O₃(s)

Now, the equation is balanced with 4 Fe atoms, 6 O atoms, and 6 O₂molecules on both sides.

For more such questions on balanced equation visit:

https://brainly.com/question/23877810

#SPJ8

The binding of the amino acid in aminoacyl-tRNA involves the formation of an ester bond.  Option b

Aminoacyl-tRNA is a complex molecule that plays a crucial role in protein synthesis. It consists of a tRNA molecule covalently linked to an amino acid. The amino acid is attached to the 3' end of the tRNA molecule through an ester bond.

An ester bond is formed between the carboxyl group (-COOH) of the amino acid and the hydroxyl group (-OH) of the ribose sugar at the 3' end of the tRNA molecule. This ester bond is also referred to as an ester linkage. The formation of the ester bond is catalyzed by the enzyme aminoacyl-tRNA synthetase.

The ester bond in aminoacyl-tRNA is essential for protein synthesis. During translation, the aminoacyl-tRNA molecule carries the specific amino acid to the ribosome, where it is incorporated into the growing polypeptide chain. The ester bond is later hydrolyzed, releasing the amino acid for further use in protein synthesis.

In summary, the binding of the amino acid in aminoacyl-tRNA involves the formation of an ester bond between the carboxyl group of the amino acid and the hydroxyl group of the ribose sugar in the tRNA molecule.

Option b

For more such question on amino acid visit:

https://brainly.com/question/30265108

#SPJ8

The correct option is C, The measure of peak separation in a chromatographic method that equals the difference in retention time for two components divided by the average of their peak widths is known as the resolution (R).

Chromatography is a method used in physics and chemistry to separate and analyze the components of a mixture. The principle behind chromatography is based on the different rates at which the components of a mixture move through a medium. In a typical chromatographic method, a mixture is dissolved in a mobile phase and then passed through a stationary phase. The stationary phase can be a solid or a liquid, depending on the type of chromatography being used.

As the mixture passes through the stationary phase, the different components of the mixture interact differently with the stationary phase and move at different rates, leading to separation. The separated components can then be identified and quantified using a range of detection techniques, such as UV-visible spectroscopy, mass spectrometry, or flame ionization detection. Chromatographic methods are widely used in many areas of physics and chemistry, including analytical chemistry, biochemistry, environmental science, and materials science, among others.

To learn more about Chromatographic method visit here:

brainly.com/question/28042202

#SPJ4

Complete Question:

A measure of peak separation in a chromatographic method that equals the difference in retention time for two components divided by the average of their peak widths is the definition of Group of answer choices

a. retention factor.

b. derivatization.

c. resolution.

d. affinity.