The specifications for a manifold gasket that installs between two engine parts calls for a thickness of 2.500 mm +.020 mm. The standard deviation of the process is estimated to be 0.004 mm. The process is currently operating at a mean thickness of 2.50 mm. (a) What are the upper and lower specification limits for this product? (b) What is the Cp for this process? (c) About what percent of all units of this gasket will meet specifications? Does this meet the technical definition of Six Sigma?

Answers

Answer 1

(A) The upper specification limit (USL) for the gasket thickness is 2.520 mm, and the lower specification limit (LSL) is 2.480 mm.

(B)  The process capability index (Cp) for this process is 0.833.

(C) 99.9999% percent of all units of this gasket will meet specifications

(a) The upper specification limit (USL) can be calculated by adding the maximum allowable tolerance to the mean thickness. Therefore, USL = 2.500 mm + 0.020 mm = 2.520 mm. The lower specification limit (LSL) is calculated by subtracting the maximum allowable tolerance from the mean thickness. Therefore, LSL = 2.500 mm - 0.020 mm = 2.480 mm.

(b) The process capability index (Cp) is a measure of how well a process meets the specifications. Cp is calculated by dividing the tolerance width (the difference between the USL and LSL) by six times the process standard deviation. In this case, the tolerance width is 0.020 mm, and the process standard deviation is 0.004 mm. Therefore, Cp = (USL - LSL) / (6 * standard deviation) = 0.020 mm / (6 * 0.004 mm) = 0.833.

(c) To determine the percentage of units that meet specifications, we need to calculate the proportion of the process within the specification limits. Since the process is normally distributed, we can use the cumulative distribution function (CDF) of the normal distribution to find this proportion. By calculating the z-scores for the USL and LSL using the formula z = (x - mean) / standard deviation, we can find the corresponding probabilities from the standard normal distribution table. Subtracting the cumulative probability of the LSL from the cumulative probability of the USL gives us the proportion of units meeting specifications. If this proportion is greater than 99.99966% (corresponding to a 6-sigma level), then it meets the technical definition of Six Sigma.

In summary, the upper specification limit (USL) for the gasket thickness is 2.520 mm, and the lower specification limit (LSL) is 2.480 mm. The process capability index (Cp) for this process is 0.833. To determine the percentage of units meeting specifications, we need to calculate the proportion of the process within the specification limits using the cumulative distribution function (CDF) of the normal distribution. If this proportion exceeds 99.99966%, it meets the technical definition of Six Sigma.

Learn more about capability index:

brainly.com/question/31977664

#SPJ11


Related Questions

What
is defined as a capital asset?

Answers

An item that you own for investments or personal purposes

What is the function of a ledger?
record only cash payments
record only credit payments
record and consolidate all financial transactions
record only sales

Answers

Answer:

Record and consolidate all financial transactions.

Explanation:

A ledger is a book that contains a record of all the transactions made- be it credit or withdrawals/ expenses. It is a book that maintains a record of any form of transaction that was ever done by a person or company.

It can also be a computer folder where the same record is made. The main point of maintaining a ledger is to keep track of, record, and also "make" solid evidence or proof of the transactions ever done. Thus, the function of a ledger is to record and consolidate all financial transactions ever done.

Advocacy is the active support of a cause. True False​

Answers

Answer:

True.

Explanation:

By definition, Advocacy is the active support of an idea or cause expressed through strategies and methods that influence the opinions and decisions of people and organisations.

Answer:

True

Explanation:

...

Which industry is the second-largest employer of teens
and young people?
What percentage of employed teens are employed by
the government?​

I got it
is retail trade
and 7%

Answers

Answer:

I. Retail industry

ii. 7%

Explanation:

Retail industry is the second largest employers of teen and young people next to health sector which is the largest employer.

Retailing involves buying goods either from the producers or wholesaler and selling them to the final consumers. Some services are also offered in these retailing such as call center representative, those who work in innovation lab. etc

In the United States, about 7% of teens and young people are in the employment of government , while retail industry is the largest employer of teen and young people because it provides flexibility and also do not involve much academic qualifications.

Example of these retail jobs are those who work in call center, sales representatives and those who works in stores.

Answer:

Retail Trade

7%

Explanation:

Edge 2020

People are slowing down their spending and holding onto their money, causing a sluggish economy. What is one way to
stimulate the economy?
Require commercial banks to purchase T-bills from the Federal Reserve
Sell T-sits to commercial banks
Decrease the reserve requirements at banks.
Raise the discount rate.

Answers

Answer:

decrease reserve requirements

Explanation:

if banks don't need to keep on hand as much cash in reserve, they will loan that money out, which allows people to build houses, start businesses, or do other activities that generate economic activity like purchases, sales, hires, etc

which economic system can change quickly, but does not offer entrepreneurs the incentive to start their own businesses?

Answers

A centrally planned economy can change quickly but does not offer entrepreneurs the incentive to start their own businesses.

A centrally planned economy can change quickly due to its centralized decision-making and control over resources. In such a system, the government determines production levels, resource allocation, and prices. However, it lacks the incentives that drive entrepreneurs to start their own businesses. In a centrally planned economy, the government typically owns or controls the means of production and distribution, limiting the opportunities for private ownership and entrepreneurship. Without the potential for personal gain and profit, individuals may lack the motivation to take risks, innovate, and invest in new ventures. This can lead to a stagnation of economic growth and innovation, as the absence of market competition and rewards diminishes the drive for entrepreneurial activity.

learn more about entrepreneurs here:

https://brainly.com/question/30711594

#SPJ11

Joe owns a business which produces wooden furniture he employs 20 workers in the production Department and three workers in the office is Joe pays all his workers wages which are calculated by time rate but he is thinking of changing to peace rate

Answers

Answer:

The peace rate will result in lower total wages than time rate.

Explanation:

Piece rate is a wages calculator in which labors are paid for the piece of work done by them. They are paid for the quantity of units produced irrespective of time consumed. Time rate is wage calculation method in which wages are calculated based on hours worked. The major disadvantage for this method is that labors can waste time making products due to securing high wage.

Harriet Kirby, a fund raising manager at a women's rights organization, experienced a bad incident last year with the public relations manager of a banking company who had committed to sponsor a charity event. The bank backed out at the last minute. This year, when a renowned international bank executive showed interest in sponsoring the organization's upcoming annual event, Kirby rejected their participation. She felt that banks have a casual approach toward charity events and it is risky to involve them in the event. Which of the following best characterizes Kirby's decision?
A) selective perception
B) cognitive dissonance
C) self-serving bias
D) bandwagon effect
E) self-fulfilling prophecy

Answers

Answer:

A

Explanation:

selective perception is a form of bias when new information is interpreted in a way that conforms to existing values and beliefs.

Which of the following tasks would be a prep cook's main responsibility?
O A. garnishing dinner plates to be served to customers
OB.
cooking steaks for diners
OC. washing and cutting lettuce for salads
OD. washing dishes

Answers

Answer:

Most likely OC

Explanation:

Answer:

C. washing and cutting lettuce for salads

Explanation:

Hope this will help

Jason and Ed have a business idea that they plan to commercialize. They approach an independent investor to raise funds for their business. If they can impress the investor with their business idea, the investor will agree to provide the necessary amount of money in return for some ownership share in the company. The independent investor that Jason and Ed are banking on is referred to as a

Answers

Answer:

The answer is "venture capitalist".

Explanation:

The venture capitalists are a private equity adequate time and resources equity to companies with a high potential for growth in exchange for an equity stake. This might finance new companies or support local businesses that want to expand but don't have access to equity markets. It aims to generate returns to individual liability thru the financing of innovations and through the assistance of businesses.

The most important determinant of channel length is the degree to which a retail system is:
A. concentrated.
B. fragmented.
C. decentralized.
D. globalized.

Answers

The most important determinant of channel length is the degree to which a retail system is fragmented. So, the correct answer is B. fragmented.

Channel length refers to the number of intermediaries involved in the distribution process, and a fragmented retail system has numerous small retailers, each serving a specific market niche. This fragmentation often leads to a longer distribution channel, as there are more intermediaries involved in bringing products from manufacturers to the end consumers.

In contrast, a concentrated, decentralized, or globalized retail system may have fewer intermediaries, resulting in a shorter channel length.  In conclusion, a fragmented retail system is the most important determinant of channel length.

To know more about retail system refer here:

https://brainly.com/question/31753254#

#SPJ11

1. Which of the following are tasks associated with business administration positions? (2 poi
Select the two that apply.
answering phones
designing goods for production
delivering goods to market
maintaining records
repairing computers

Answers

Answer:It's A

Explanation: Took the test

Which resource management activity identifies and verifies?.

Answers

Answer:

different kinds of buisness vary

Explanation:

Which would be the LEAST helpful to you as you begin to explore future
careers?
trace careers in my family
O interview someone in a career I'm considering
research a career I'm considering
wait until I graduate high school to figure it out

Answers

Answer:

Waiting until you graduate high school to figure out your future career is the least helpful.

Answer:

D ( the last one )

Explanation:

Finding a career takes time. Its something that you love to do or passionate about. Waiting till high school isn't a good idea because your going to have lots of pressure and may ending up not getting a job. therefore the answer is D

Henderson's+hardware+has+an+roa+of+11%,+a+8%+profit+margin,+and+an+roe+of+21%.+what+is+its+total+assets+turnover?+do+not+round+intermediate+calculations.+round+your+answer+to+two+decimal+places.

Answers

Total asset turnover = 1.375

Explanation:

In this question we use the DuPont analysis which is presented below:

Return On Assets = Net Profit Margin × Total asset turnover

0.11 = 0.08 × total assets turnover

So, the total assets turnover would be

= 0.11 ÷ 0.08

= 1.375

Simply we find out the asset turnover by applying the return on assets formula that is displayed above.

Asset turnover, overall asset turnover, or asset turns is a monetary ratio that measures the efficiency of a agency's use of its property in generating income sales or income earnings to the agency.

What's total asset turnover?

Asset turnover is the ratio of overall income or sales to common assets. This metric facilitates traders apprehend how effectively companies are using their belongings to generate sales. Buyers use the asset turnover ratio to examine comparable agencies within the identical area or group.

What does a total asset turnover of 1.5 imply?

For the duration of the same length, the enterprise's overall belongings mentioned on its 12 monthly balance sheets averaged $1,400,000. The organization's general asset turnover for the 12 months became 1.5 (net income of $2,100,000 divided by means of $1,400,000 of average total assets).

Learn more about Asset turnover here:- https://brainly.com/question/22848654

#SPJ4

What health issue did Feiler face that led him to consider his family?

Answers

that would probably be his family i think

An opinion poll was conducted to find the reaction to a proposed civic reform in 100 members of each of the two political parties. The information is tabulated below:
Favourable Unfavourable. Indifferent
Party A 40 30. 30
Party B. 42. 28. 30
Test for independence of reaction with the
affiliations.

Answers

In order to test the independence of reaction with affiliations in an opinion poll, the chi-square test for independence is used. To conduct a chi-square test for independence of reaction with affiliations: Table of observed frequencies is generated for each political party Frequencies are converted into percentages.

Calculations are made based on the null hypothesis A table of expected values is generated based on the null hypothesis Observed values are compared to the expected values to determine the deviation from the null hypothesis .A chi-square test statistic is calculated based on the deviation from the null hypothesis. The obtained test statistic is compared to the chi-square distribution table to find the level of significance. Test for independence of reaction with affiliations: Party A Favorable different - 30Total - 100PartyBFavorable - 42,28, Indifferent - 30Total - 100The total sample size is 200. Frequencies can be converted into percentages as follows: Party A: Favorable - 40%,  30%, Indifferent - 30%.Party B: Favorable - 42%,  - 28%, Indifferent - 30%.The null hypothesis states that there is no association between affiliations and reactions to a proposed civic reform.

The observed values and expected values are as follows: Observed Values Expected Values (Under the Null Hypothesis)PartyAFavorable30Unfavourable30Indifferent40Total 100PartyBFavorable30Unfavourable30Indifferent40Total 100Using the formula for the chi-square test statistic:χ2 = ∑ (O − E)² / E Where O is the observed value, E is the expected value, and ∑ is the sum of all values. The test statistic is calculated as follows:χ2 = [(40 - 30)² / 30] + [(30 - 30)² / 30] + [(30 - 40)² / 40] + [(42 - 30)² / 30] + [(28 - 30)² / 30] + [(30 - 40)² / 40]χ2 = (100/3) + (10/3) + (25/4) + (144/3) + (4/3) + (25/4)χ2 = 34.25The degrees of freedom () for the chi-square test for independence of reaction with affiliations is calculated as:(r-1) (c-1) = (2-1) (3-1) = 2 degrees of freedom. To determine the level of significance, the obtained test statistic is compared to the chi-square distribution table for 2 degrees of freedom at the desired level of significance. At the 0.05 level of significance, the critical value is 5.991. Since the obtained test statistic (χ2 = 34.25) is greater than the critical value (5.991), we reject the null hypothesis. Therefore, there is a significant association between affiliations and reactions to a proposed civic reform.

To know more about hypothesis visit:

https://brainly.com/question/3831095

#SPJ11

Segment of fashion industry that includes selling merchandise directly to consumers

Answers

Answer:

Elaborate Please.

Explanation:

C&A sells two kinds of eggs: brown and white. Brown eggs are 5% more expensive than white. Which of the following is the most appropriate way to measure how many eggs C&A has in inventory?
A. In dollars
B. In dozens
C. In inches
D. In ounces

Answers

B) In dozens. Measuring the number of eggs in inventory in dozens is the most appropriate way because the price difference between the brown and white eggs does not affect the quantity of eggs in inventory, only the value.

Measuring in dollars would be affected by the price difference, and measuring in inches or ounces is not relevant to measuring the quantity of eggs.

In general, chickens with white feathers lay eggs with a white shell, whereas those with brown feathers lay eggs with a brown shell. Unless the feed has been improved for specialty eggs like Omega-3, brown and white eggs are nutritionally equivalent.

Because it takes more to feed the birds that lay brown eggs, brown eggs are more expensive than white eggs. These hen breeds will consume more food and need larger quantities of it since they need more energy to lay their eggs.

To know more about brown eggs refer here:

brainly.com/question/9586668

#SPJ11

Why did the stock market crash make people lose confidence in business?

Answers

The stock market crash of 1929 caused people to lose confidence in business because it revealed underlying economic problems and a lack of transparency in the market.

The crash was caused by a combination of factors such as overproduction, underconsumption, and a speculative bubble in the stock market. People who had invested heavily in the stock market saw their investments lose value overnight, which led to a loss of trust in the market and in the businesses that were listed on it.

The crash also exposed the lack of regulation and oversight in the market, which further eroded people's confidence in businesses. Additionally, the crash led to a severe economic depression, causing widespread unemployment and economic hardship, which further damaged people's confidence in business.

The Great Depression was a global economic crisis that lasted from 1929 to 1939 and is considered the longest and most severe depression of the 20th century.

To learn more about Stock Market,

https://brainly.com/question/28222929

#SPJ4

How did cecilia’s knowledge of economics help her make a savvy commodity purchase? she knew that diamonds are popular and in high demand. she knew that diamonds are a nonrenewable resource, making them scarce. she knew that the cost of diamonds depends only on the demand. she knew that the purchase of diamonds will satisfy wants and needs.

Answers

"She knew that diamonds are a non-renewable resource" is the knowledge of economics that helped her make a savvy commodity purchase.

Resource allocation is often known as the distribution of productive assets among various uses.

Resource allocation is a problem because a society's resources are finite, although people's wants are typically limitless, and since any given resource can be put to a variety of different uses.

The price system is the main mechanism in free-enterprise systems for allocating resources to the uses that consumers find most appealing.

Resource allocation decisions are made politically in planned economies and in the public sectors of mixed economies.

Any economizing agency's goal is to distribute resources in a way that gets the most output from a given combination of resources, within the bounds of available technology.

Hence, the correct answer is "She knew that diamonds are a non-renewable resource".

Learn more about Economics:

https://brainly.com/question/17996535

#SPJ4

Answer:

B.)  She knew that diamonds were a nonrenewable source, making them scarce.

Explanation:

the biggest advantage of the data flow approach lies in the conceptual freedom found in the use of the four symbols. true or false

Answers

The statement that the biggest advantage of the data flow approach lies in the conceptual freedom found in the use of the four symbols is false, as it oversimplifies the approach and does not capture its full range of benefits.

False. The data flow approach, also known as the data flow diagram (DFD) approach, is a graphical representation technique used to depict the flow of data within a system. It involves the use of various symbols and not just four symbols. The symbols used in a DFD include circles (representing processes), arrows (representing data flow), rectangles (representing external entities or sources/destinations of data), and parallel lines (representing data stores).

The advantage of the data flow approach lies in its ability to provide a clear and visual representation of how data moves and is transformed within a system. It helps in understanding the logical structure of a system and identifying the data inputs, outputs, processes, and interactions with external entities. It allows for effective communication and analysis of system requirements, making it a valuable tool in system development and design.

Learn more about biggest advantage here:

https://brainly.com/question/31148832

#SPJ11

Which of the following is not an additional tax a taxpayer may have to pay? Multiple Choice Alternative minimum tax. Self-employment tax Net investment income tax Excess wage tax.

Answers

Excess wage tax. Excess wage tax is not an additional tax that a taxpayer may have to pay. The alternative minimum tax (AMT) is a separate tax system that imposes a minimum level of tax liability on certain taxpayers.

Self-employment tax is a tax that individuals who work for themselves must pay to fund Social Security and Medicare. Net investment income tax is a tax imposed on certain types of investment income for high-income individuals. However, there is no specific tax called "excess wage tax." It is important for taxpayers to be aware of these potential additional taxes and understand their applicability based on their income sources and circumstances.

Learn more about   Excess wage tax here;

https://brainly.com/question/32683894

#SPJ11

Which critical thinking skill is used to gain new insight into your thinking?
Open-mindedness
Reflection
Curiosity
Evaluation
Information-gathering

Answers

Answer: Reflection

Explanation:

You can gain insight by asking a person to reflect and evaluate an experience and explain their thought processes during that time. This can help you develop your critical thinking by providing you real-world examples.

the magnitude of operating leverage for perkins corporation is 4.5 when sales are $100,000. if sales increase to $110,000, profits would be expected to increase by what percent? a. 4.5% b.14.5% c.45% d.10%

Answers

It would be anticipated that the profit would rise by 45%. The appropriate response to the given question is option (c).

What is Operating Leverage?

The percentage of a company's cost structure that is made up of fixed expenses as opposed to variable costs is measured by operating leverage. A corporation is said to have more operating leverage if its fixed expenses are higher than its variable costs.

Magnitude of operating leverage= 4.5

Old sales= $100000

New sales= $110000

Percentage increase in sales:

(New-old)/old = (110,000-100,000)/100,000

                       = 10%

Consequently, a percentage rise in profit might be anticipated:

sales percentage growth times the degree of operational leverage

                        = 10% * 4.5

                        = 45%

To know more about Operating Leverage, visit:

https://brainly.com/question/29743788

#SPJ1

Question 2 (1 point)
Huda wants to buy soda. A 12-pack costs $9.50. She knows that with the local sales
tax of $2.00, the total should be $11.50. However, when she gets to the checkout,
the total is now $13.00. Which type of tax is Huda MOST likely paying that would
explain the extra $1.50?
estate
excise
inheritance
O income
Question 3 (1 point)

Answers

Excise, it's an extra tax which makes you pay more

Answer:

$2:00,o income $ 1:50 huda soda most type that tax 3)1 point )

taxes are a price based policy tool intended to internalize the negative externality imposed on society by the pollution that results from the production of

Answers

Taxes are a price-based policy tool intended to internalize the negative externality imposed on society by the pollution that results from the production of goods and services.

Taxes are often used as a policy tool to address negative externalities, such as pollution, that arise from certain economic activities. When firms engage in production, they often generate negative externalities that impose costs on society, such as air and water pollution. These costs are not reflected in the market prices of the goods and services produced, leading to an inefficient allocation of resources. Taxes, specifically known as Pigouvian taxes, are designed to internalize these external costs and incentivize firms to reduce their pollution levels. By imposing taxes on pollution, governments aim to make firms internalize the negative externalities they generate. The tax serves as a price signal that reflects the true social cost of production, including the environmental impact. As a result, firms face a higher cost of production, which encourages them to adopt cleaner and more environmentally friendly technologies or reduce their pollution levels. The tax effectively internalizes the external costs by aligning private costs with social costs, leading to a more efficient allocation of resources and a reduction in pollution.

The use of taxes as a policy tool for internalizing pollution externalities has several advantages. First, it provides economic incentives for firms to invest in cleaner technologies and pollution control measures. The higher cost of production encourages firms to seek ways to reduce pollution, innovate, and find more sustainable production methods. Second, taxes can generate revenue for the government, which can be used to fund environmental protection programs or invest in renewable energy sources. Finally, taxes offer flexibility in implementation, as they can be tailored to specific industries or pollutants, allowing policymakers to target the sources of pollution more effectively.

However, it is important to design and implement taxes carefully to achieve the desired outcomes. The tax rate should reflect the true social cost of pollution and strike a balance between incentivizing pollution reduction and avoiding excessive burdens on businesses. Additionally, taxes should be accompanied by monitoring and enforcement mechanisms to ensure compliance and prevent firms from simply passing on the tax burden to consumers through higher prices. Overall, taxes serve as an important policy tool to address pollution externalities and promote more sustainable and environmentally responsible production practices.

To learn more about Pigouvian taxes click here:

brainly.com/question/31236675

#SPJ11

How can a manager encourage an employee to get more "life out of their current work-life balance strategy
A
take a walk around the block
B.
take a nap in the office's nap room
C. ignore emails when theyre not on call
D.
add a couple extra shifts to their schedule this week

Answers

Answer:

d B)

Explanation:

Answer:

A) Take a walk around the block

... its literally the only positive response lol

Explanation:

To determine if a project is acceptable compare the internal rate of return to the company's ______.

Answers

In order to determine if a project is acceptable, it's important to compare the internal rate of return to the company's cost of capital.

It should be noted that the rate of return is determined by assessing the risk involved, cost of capital, etc.

Therefore, to determine if a project is acceptable, one has to compare the internal rate of return to the company's cost of capital. If the IRR is greater than the cost of capital, then the project should be accepted.

Read related link on:

https://brainly.com/question/25648326

Steve needs to know whether his company made money or lost money in the last quarter of 2019. what type of financial statement should he look at?

Answers

Steve needs to know whether his company made money or lost money in the last quarter of 2019. Income statement he should be looking at income statement as income statement will be offered with details of all the incomes and losses made during the previous years.

An Income statement is one of the most not unusual, and important, of the monetary statements you're in all likelihood to come across. additionally known as earnings and loss (P&L) statements, earnings statements summarize all profits and expenses over a given length, including the cumulative impact of sales, gain, rate, and loss transactions.

An Income statementindicates a corporation's sales, expenses, and profitability over a time frame. it is also on occasion referred to as an earnings-and-loss (P&L) assertion or an earnings assertion. It indicates your: revenue from selling services or products. charges to generate sales and manage your enterprise.

A profits announcement is one of the more essential economic statements you can examine for business. business proprietors, accountants, cutting-edge traders, and potential buyers alike can glean essential statistics for themselves from an enterprise's profits announcement, also referred to as the profit and loss assertion.

Learn more about Income statements here https://brainly.com/question/24498019

#SPJ4

Other Questions
You can transform circle v to circle v' by translating it and then performing a dilation centered at v'. find the translation rule and the scale factor of the dilatio Find the perimeter and area of triangle ABC with altitude BD, given A(-5, 2) B(-3, 5), C(5, 2), and D (-3, 2). dr. julian works at a prison and helps to determine if criminal defendants are mentally competent to stand trial. dr. julian is most likely a .Consider the estimated quadratic model y = 21 + 1.5x - 0.03x^2. a. Predict y when x equals 10, 20, and 30. (Round Intermediate calculations to at least 4 decimal places and final answers to a whole number.) Predicted y For x = 10 For x = 20 For x = 30 b. Find the value of x at which the predicted y is optimized. At this x value, Is the predicted y maximized or minimized. (Round Intermediate calculations to at least 4 decimal places and final answer to a whole number.) Can I just have a very quick simple answer to this question? What is the slope of the line x = 3?A. Undefined. 0C. 1D. 3 How can virtual leaening affect kids On January 1, 2021, Cori Ander Herbs granted restricted stock units (RSUs) representing 300,000 of its $1 par common shares to executives, subject to forfeiture if employment is terminated within three years. After the recipients of the RSUs satisfy the vesting requirement, the company will distribute the shares. The common shares had a market price of $12 per share on the grant date. At the date of grant, the company anticipated that 6% of the recipients would leave the firm prior to vesting. In 2022, 2% of the options are forfeited due to executive turnover. The company chooses the option not to estimate forfeitures. What amount should the company record as compensation expense for the year ended December 31, 2022 rearrange the word c u r s y t Why is methanol a liquid at room temperature? help will give Brainliest!!!!!!!!!!!!! in the first month of operations, the total of the debit entries to the cash account amounted to $7,000 and the total of the credit entries to the cash account amounted to $4,000. at the end of the month, the cash account has a What are redcoats advantages? A cockroach can travel at a speed of 80 centimeters per second. A centipede can travel at 30 meters perminute. Which can travel faster? Are the following relations, functions, yes or no? 1. { (1, 4), (2, 5), (3, 6), (1, 6)} 2. { (1, 3), (2, 3), (4, 3), (5, 3)} 3. {(1, 1), (2, 1), (4, 5), (5, 12), (2, 2)} Plz help i will give brainlest and alot of points. Calculate how much the company should be prepared to pay consultants for perfect information on the purchase of colours in the coming year Find the average value of f(x,y)=6e yx+e y over the rectangle R=[0,2][0,4]. Average value = 43 ( 154 (4+e 4 ) 25 154 (3) 25 4 15e 10 + 154) The graph ofy = x3 is transformed as shown in the graph below. Which equation represents the transformedfunction?543213-1125X-2y=x-4y =(x-4) at the end of the current year, using the gaining (or analysis) of receivable method, management estimated that $15,750 of the accounts receivable balance would be uncollectible. prior to any year-end adjustments, the allowance for doubtful accounts had a debit balance of $375. what adjusting entry should the company make at the end of the current year to record its estimated bad debts expense? according to research, which of the following personality dimensions have significant effects on perceptions of leader charisma? The primary reason the nurse encourages a client with a spinal cord injury to increase oral fluid intake is to prevent which problem?