There is a development team delivering a new software package with agile and devops frameworks. in one of the releases, the automated unit tests failed. what practice should be implemented in this situation?

Explanation:

Winglets are devices mounted at the tip of the wings. Winglets are used to improve the aerodynamic efficiency of a wing by the flow around the wingtip to create additional thrust. They can improve airplane performance as much as 10% to 15%.

To verify a Windows system meets the minimum processor requirements

to install software, use the system control panel window.

This is the window which is found in all computers and comprises of the

following:

Checking this window will help to check if the windows system meets the

necessary requirements.

Read more about System control here https://brainly.com/question/14878948

WAN connects computers at different geographic locations. A wide area network (WAN) is a telecommunications network that connects devices over large geographic areas. WANs can be used to connect computers in different cities, countries, or even continents to each other.

It is used to connect different LANs, MANs, or SANs to enable data sharing and communication among them.The different types of WANs include packet switching, circuit switching, leased line networks, and satellite networks.

A WAN can be established using various technologies such as fiber optic cables, copper wires, microwave transmission, and radio waves. WAN technology can be expensive due to the high bandwidth and infrastructure needed, however, it is essential for organizations that need to connect remote offices, data centers, and cloud computing services.

To know more about geographic visit:

https://brainly.com/question/32503075

#SPJ11

Answer:

Where I work we call those hot-swappable or devices capable of "concurrent maintenance."

Explanation:

An advantage of using an operating system that employs a GUI (Graphical User Interface) compared to using a command line is that you do not have to deal with confusing icons, you can interact directly with the operating system, and you do not have to memorize complicated commands.

A GUI provides a visual representation of the operating system, making it easier for users to navigate and interact with the computer. Instead of typing commands, users can simply click on icons or use menus to perform various tasks. This eliminates the need to remember specific commands and their syntax, making the operating system more user-friendly and accessible to those who are not familiar with command line interfaces.

Additionally, a GUI provides a more intuitive and visually appealing user experience, as it allows users to interact with the computer using graphical elements such as windows, buttons, and menus. Overall, the use of a GUI simplifies the user experience and reduces the learning curve associated with using a command line interface.

Learn more about an operating system

https://brainly.com/question/1033563?

#SPJ11

Explanation:

Gaming: PCs are also used for gaming. The games can either be online or offline games.

Answer:

When two people answer you can make someone Brainliest so don't be confused when you couldn't when one person answers.

Explanation:

I want Brainliest, lol.

The answer is False, Double entry is a type of verification when you enter something 2 times to ensure it matches the original source.

Answer:

A) They are interactive

Explanation:

Answer:

i dunno

Explanation:

Answer:

Explanation:

First conditional is used to talk about actions/events in the future which are likely to happen or have a real possibility of happening. If it rains tomorrow, I'll stay at home.

In statistics, a null hypothesis refers to the hypothesis which states that there is no real difference between two populations or a sample and a population. The null hypothesis is considered valid unless proven wrong by statistical testing. When performing a hypothesis test, a decision rule is created to compare the test statistic to the critical value for the chosen alpha level.

Suppose a conclusion is made on the basis of a statistical test, and it is wrong. In that case, it would be called a Type I error, which occurs when the null hypothesis is rejected when it is, in fact, true. A Type I error is considered to be a false positive because it has resulted in a conclusion that the null hypothesis is false when, in fact, it is true. Thus, we have rejected a correct hypothesis. This is why Type I errors are also called errors of the first kind.
In a conclusion where an error has been made, it will be a Type I error if it was wrong, even though it was true. This is what makes it a false positive.

Learn more about null hypothesis here,
https://brainly.com/question/30821298

#SPJ11

Answer:

B) Create all new regional folders and move the reports to the respective region folder with viewer access.

Explanation:

Below are the options

A) Create grouped folders, keeping the top region folder sharing settings and limiting the sharing settings for the grouped folders for each region.

B) Create all new regional folders and move the reports to the respective region folder with viewer access.

C) Create all new regional folders and move the reports to the respective region folder with subscribe access.

D) Create subfolders, keeping the top region folder sharing settings and limiting the sharing settings for the subfolders for each region

In order to required reports at one place and also wants to retain the visibility for each folder the consultant should suggest that all new regional folders should be created and afterwards it would be moved to their relevant region folders by involving the viewer access feature so that the VP should access it anytime

Hence, the correct option is B.

Based on the information given, the correct option will be B. Create all new regional folders and move the reports to the respective region folder with viewer access.

From the information given, it was stated that the VP of sales needs one place to find the reports and still wants to retain visibility of the reports in each folder.

Therefore, it's important to create all new regional folders and move the reports to the respective region folder with viewer access.

Learn more about folders on:

https://brainly.com/question/20262915

an object data type is used for a document or image that is attached to the field, which can be opened in the program that created the document or image- b. false.

A database in computing is a structured collection of data that is electronically accessible and stored. Large databases are housed on computer clusters or cloud storage, whilst small databases could be stored on a file system. Data modelling, effective data representation and storage, query languages, privacy and security of sensitive data, and distributed computing challenges, like providing concurrent access and fault tolerance, are all part of the design of databases. In order to collect and process data, a database management system (DBMS) communicates with applications, end users, and the database itself. The primary tools offered to manage the database are also included in the DBMS software. the database system or a database-related application.

To know more about database visit:

https://brainly.com/question/29775297

#SPJ4

Answer:A freedom from retaliation for exercising safety and health rights

Explanation:

Answer:

you can use an array to do this

Explanation:

(I've written this in java - I think it should work out):

Scanner input = new Scanner(System.in);

System.out.println("Enter an integer: ");

int userInt = input.nextInt();

int[] array = new int[userInt - 1];

for(int i = userInt-1; i < userInt; i--)

     System.out.println(array[i]);

The device category that includes ultrabooks and netbooks is laptops. Laptops are portable computers that are designed for on-the-go use. Ultrabooks and netbooks are both subcategories of laptops. Ultrabooks are thin and lightweight laptops that are designed to be ultra-portable.

They are typically less than 0.8 inches thick and weigh less than 3 pounds. Netbooks, on the other hand, are small laptops that are designed primarily for web browsing and basic computing tasks. They are typically less powerful than traditional laptops but are also more affordable. It is important to note that while ultrabooks and netbooks are both subcategories of laptops, they do have some key differences.

Ultrabooks are typically more powerful and expensive than netbooks, and they are designed for more intensive computing tasks. Netbooks, on the other hand, are designed for basic tasks such as web browsing, email, and word processing. In summary, the device category that includes ultrabooks and netbooks is laptops. While there are differences between ultrabooks and netbooks, both are subcategories of laptops that are designed for on-the-go use. the device category that includes ultrabooks and netbooks is a. Ultrabooks and netbooks are both subcategories of laptops. Ultrabooks are thin and lightweight laptops that are designed to be ultra-portable. They are typically less than 0.8 inches thick and weigh less than 3 pounds. Netbooks, on the other hand, are small laptops that are designed primarily for web browsing and basic computing tasks. They are typically less powerful than traditional laptops but are also more affordable. It is important to note that while ultrabooks and netbooks are both subcategories of laptops, they do have some key differences. Ultrabooks are typically more powerful and expensive than netbooks, and they are designed for more intensive computing tasks. Netbooks, on the other hand, are designed for basic tasks such as web browsing, email, and word processing. laptop. Ultrabooks and netbooks are both subcategories of laptops, designed to be portable and lightweight compared to traditional laptops. They do not fall under the categories of supercomputers, tablets, smartphones, or processors.

To know more about Laptops visit:

https://brainly.com/question/28525008

#SPJ11

An IP host uses the Internet Group Management Protocol (IGMP) to inform a router that it wants to receive specific multicast frames.

The Internet Group Management Protocol (IGMP) is used by IP hosts to communicate with adjacent routers in order to join or leave multicast group memberships. When an IP host wants to receive specific multicast frames, it sends IGMP messages to the local router indicating its interest in joining a particular multicast group. The router uses this information to establish and maintain the multicast distribution tree, ensuring that the multicast traffic is delivered only to those hosts that have explicitly requested it. IGMP operates at the network layer (Layer 3) and is an essential protocol for enabling efficient multicast communication within an IP network.

To learn more about   Internet click on the link below:

brainly.com/question/31569070

#SPJ11

The options that the follow is an event are Options B, C, D and E:

An event is a recognized action or occurrence by software that frequently originates asynchronously from the external world and can be addressed by the software. The system, the user, or other factors can produce or trigger computer events.

An action or occurrence that can be recognized by a program and has implications for the hardware or software of a system is referred to as an event in the context of computing. Keystrokes and mouse clicks are examples of user-generated events, while program loading, memory usage, and errors are examples of system-generated events.

Therefore, the above are event, particularly one of considerable significance, that takes place or is perceived to take place. the result, problem, or outcome of anything.

Learn more about event  from

https://brainly.com/question/27777013
#SPJ1

Answer:

TRUEE

Explanation:

Answer: Maybe try to move router.

Explanation:

Certain words change color in Python  to show that they are recognized as key words.

Python is a general purpose computer programming language that is used to generate a variety of programs to solve problems such as

In Phyton, Syntax highlighting is used when coding to display text according to source codes, category of terms and keywords.

For example:

See more for Phyton and colors :https://brainly.com/question/21575266

The total size of st1 is 14 bytes, the total size of st2 is 16 bytes, and the total size of st3 is 16 bytes.

In st1, there are 7 elements of type short, each of which is 2 bytes, and 7 elements of type char, each of which is 1 byte. Therefore, the total size of st1 is 7 * 2 + 7 * 1 = 14 bytes.

In st2, there are 2 elements of type int, each of which is 4 bytes, 5 elements of type short, each of which is 2 bytes, and 2 elements of type char, each of which is 1 byte. Therefore, the total size of st2 is 2 * 4 + 5 * 2 + 2 * 1 = 16 bytes.

In st3, there are 5 elements of type short, each of which is 2 bytes, 2 elements of type int, each of which is 4 bytes, and 2 elements of type char, each of which is 1 byte. Therefore, the total size of st3 is 5 * 2 + 2 * 4 + 2 * 1 = 16 bytes.

For more questions like Byte click the link below:

https://brainly.com/question/2280218

#SPJ11

Answer:

The following are the steps to change the profile name.

Explanation:

In the given question it is not defined in which we change the profile name.so, we define the steps to change the profile name social media like (Face book).

Answer:

MUDA DA MUDAAAA

Explanation:

Archive file identifies the file as having been modified since the last backup.


Archive file understanding

 The meaning of the word Archive in the Online Computer Dictionary is used to make a copy of a backup file with the aim of protecting the original copy from damage.


 How to Archive Files Into 1 File

 If you want to send a large number of files, you can make the file into 1 archive file format with .zip, .tar, or .rar format first.  This method is also quite easy and fast.

• First, make sure your computer has programs such as winzip, winrar.  This program is needed to archive files.

•  Second, you can select the file you want to archive, then right-click on the file.  The example below shows 2 files to be archived

• The third step, you can directly select Add to “folder name.rar” to directly create archive files automatically.  If you want to do some settings, it can be done by selecting the Add to archive option.

 The Add to archive option allows you to choose the save format of the file, divide or create the archive into several parts (part 1, part 2, etc.), to create a password.  With the password, before the file can be extracted, it is necessary to enter the password first.

 In addition to files, you can also archive folders directly along with the contents of the files in it.  Keep in mind, how fast the process of archiving this file will depend on how many or large files to be archived.


 Learn more about archive files at https://brainly.com/question/15355917.

#SPJ4

True. Linux uses a logical directory tree to organize files into different folders. Linux uses a tree-like structure to store and arrange files in directories.

A directory, also known as a folder, is a container for files and other directories. It contains all of the data associated with the files stored in it, such as the file's content and metadata. Linux's directory tree is hierarchical, with directories branching out from the root directory to the other directories.

All of the directories in the tree are related to one another. The top-level directory is the root directory, denoted by a forward slash (/). This directory contains all other directories and files in the file system. As the system administrator, you can create new directories and files in the appropriate folders, assign users and groups to them, and set permissions. Linux directory system provides an organized method for keeping track of files and folders, making it easy to find and manage files. The Linux file system's logical tree structure allows for more secure and efficient access to files. It is an important aspect of the Linux operating system and one that is frequently referenced when dealing with its many features.

To know more about Linux visit :

https://brainly.com/question/33210963

#SPJ11

Answer:

200

Explanation:

Because int number can not carry decimal point.

Answer:

a) Brute-force algorithm:

To design a brute-force algorithm to return the number of possible upturns, we can use two nested loops to compare every pair of numbers in the list for upturns. Here is an outline of the algorithm:

\(Example code:\)

# Create an arbitrary unsorted list of 6 numbers

numbers = [6, 2, 9, 5, 8, 7]

# Define a function to count upturns using brute force

def count_upturns(numbers):

   count = 0

   for i in range(len(numbers)):

       for j in range(i+1, len(numbers)):

           if numbers[i] < numbers[j]:

               count += 1

   return count

# Call the function with the example list and print the result

print(count_upturns(numbers)) # Output: 6

\(b) Efficient algorithm:\)

To design a more efficient algorithm to count upturns, we can use a modified version of the merge sort algorithm. Here is an outline of the algorithm:

\(Example code:\)

# Create an arbitrary unsorted list of 6 numbers

numbers = [6, 2, 9, 5, 8, 7]

# Define a function to count upturns using merge sort

def count_upturns(numbers):

   # Base case: if the list has only one or zero elements, it is sorted and has no upturns

   if len(numbers) <= 1:

       return 0

   # Recursive case: divide the list into two halves

   mid = len(numbers) // 2

   left_half = numbers[:mid]

   right_half = numbers[mid:]

   # Recursively sort each half and count the upturns within them

   count_left = count_upturns(left_half)

   count_right = count_upturns(right_half)

   # Merge the sorted halves together and count the upturns between them

   i = j = k = count_merge = 0

   while i < len(left_half) and j < len(right_half):

       if left_half[i] < right_half[j]:

           numbers[k] = left_half[i]

           i += 1

       else:

           numbers[k] = right_half[j]

           j += 1

           count_merge += len(left_half) - i

       k += 1

   # Copy any remaining elements from the left or right half

   while i < len(left_half):

       numbers[k] = left_half[i]

       i += 1

       k += 1

   while j < len(right_half):

       numbers[k] = right_half[j]

       j += 1

       k += 1

   # Return the total number of upturns as the sum of the upturns within each half and between them

   return count_left + count_right + count_merge

# Call the function with the example list and print the result

print(count_upturns(numbers)) # Output: 6

The time complexity of this algorithm is O(n log n), where n is the length of the input list. This is because we are using a divide-and-conquer approach to sort the list, which has a time complexity of O(n log n), and then counting the upturns during the merging step, which has a time complexity of O(n). Overall, this algorithm is more efficient than the brute-force approach for large input sizes.

Explanation:

To select a single word within a text box on a PowerPoint slide, Emery should perform the action of double-clicking the word. This action will highlight the word, allowing Emery to manipulate or format it as needed.

For such more questions on PowerPoint

https://brainly.com/question/23714390

#SPJ11