What is the missing number in the pattern below?
0, 1, 2, 3, 6, 11, 20, _?_, 68

Answer:

Isn't the answer written upside down in the sentence?

Explanation:

Answer:

To be honest I don't really know there's so much great things to be in your future just to many to choose from, but you have to work for want you want in life, but if I had to choose it would be a writer or baker.

We can predict  the direction of the coil, the polarity of the battery, polarity of the magnet and coil winding direction with the help of right-hand rule method.

A common mnemonic for remembering how to understand the orientation of axes in three-dimensional space is the right-hand rule, which is used in both mathematics and physics. It's a practical way of quickly determining the direction of a cross product of two vectors.

The fact that the three axes of three-dimensional space can have one of two possible orientations is where the majority of the different left-hand and right-hand rules come from.

This can be seen by holding one's hands outward and together, palms up, with the thumbs outstretched to the right and left, and the fingers making an upward-curling motion from straight outward.

Learn more about right-hand rules

https://brainly.com/question/14434299

#SPJ4

The resistance to bending increases by a factor of approximately 11.32 when using a W18 × 76 beam compared to a W8 × 31 beam about the x-x axis.

To calculate the factor by which the resistance to bending increases when using a W18 × 76 beam compared to a W8 × 31 beam, we need to consider the moment of inertia (I) of the beams. The resistance to bending is directly proportional to the moment of inertia.

The moment of inertia for a beam can be calculated using the following equation:

I = (1/12) * b * h^3

where:

- I is the moment of inertia

- b is the width of the beam's cross-section

- h is the height of the beam's cross-section

For the W18 × 76 beam:

- b = 6.97 inches

- h = 17.9 inches

Calculating the moment of inertia for the W18 × 76 beam:

I1 = (1/12) * 6.97 * (17.9)^3

For the W8 × 31 beam:

- b = 8.03 inches

- h = 7.99 inches

Calculating the moment of inertia for the W8 × 31 beam:

I2 = (1/12) * 8.03 * (7.99)^3

Now, we can find the factor by which the resistance to bending increases:

Factor = I1 / I2

Calculating the factor:

Factor =\([(1/12) * 6.97 * (17.9)^3] / [(1/12) * 8.03 * (7.99)^3]\)

After performing the calculation, we find that the factor is approximately 11.32.

Therefore, the resistance to bending increases by a factor of approximately 11.32 when using a W18 × 76 beam compared to a W8 × 31 beam about the x-x axis.

Learn more about resistance at https://brainly.com/question/17563681

#SPJ1

The weight of the water displaced is calculated as the product of the ship's water displacement volume and water density. Displacement is therefore equal to ship weight.

Every floating object displaces its own weight in the liquid in which it is submerged according to the Archimedes principle. A vessel's weight must match the weight of the volume of water it removes in order for it to float freely in the water. The amount of water that a vessel displaces is known as displacement.

The buoyant force acting on the object will be equal to gravity if it displaces an amount of water equal to its own weight, at which point the object will float. However, if an object weighs more than the volume of water it moves, it will sink since the buoyant force will be greater than gravity.

Know more about force here:

https://brainly.com/question/9473432

#SPJ4

Excess resources is not a common challenge of the Six Sigma Methodology within an organization. The common challenges are lack of support, poor project execution, and lack of access to data.

The Six Sigma Methodology is a process improvement methodology focused on reducing defects and increasing customer satisfaction. Common challenges of this methodology within an organization include lack of support, poor project execution, and lack of access to data. Excess resources, however, is not a common challenge as this would not directly impact the success of the methodology. Lack of support is often seen when senior management doesn’t understand the value of the methodology and fails to provide resources or support for its implementation. Poor project execution is common when the methodology isn’t applied correctly or if the organization lacks the necessary training or skills to complete the project successfully. Finally, lack of access to data is a common challenge when the organization does not have adequate data to identify problems and create solutions. Therefore, excess resources is not a common challenge of the Six Sigma Methodology within an organization.

Learn more about methodology here:

https://brainly.com/question/29220500

#SPJ4

The jet pipe rear nozzle is controlled to open when reheat is selected to ensure that there is enough space for the additional exhaust gases produced during reheat.

The reheat system, also known as the afterburner, injects fuel into the hot exhaust gases exiting the engine turbine, allowing for an increase in thrust and speed of the aircraft. The increase in the amount of fuel also means that the amount of exhaust gases will increase, which would lead to a possible collision of the exhaust with the aircraft structure if the rear nozzle is not opened.

This could cause damage to the aircraft and is also a safety risk for pilots and passengers. Therefore, the jet pipe rear nozzle is controlled to open when reheat is selected to allow the exhaust gases to exit without causing any damage. It is important to ensure that the nozzle is controlled precisely to prevent any performance issues or damage to the engine or aircraft.

to know more about nozzle visit:

https://brainly.com/question/32333301

#SPJ11

Answer:

The City can grant higher budgets to emergency services like the Fire Department, so a higher budget will allow engineers & scientists to innovate new technology and add more fire stations across the city.

Explanation:

The number of paths in the network is six.

The paths are:
C - A - T - N - EndC - A - T - R - N - EndC - B - P - U - N - EndC - B - P - U - T - R - N - EndC - B - P - A - T - N - EndC - B - P - A - T - R - N - End
2. The critical path is C - A - T - N - End with a duration of 24 weeks.

3. The float on activity U is 1 week.

4. If activity B takes three weeks longer than planned, it will affect the duration of path 3 and the entire project. It will elongate the project duration to 29 weeks.

2. b) The critical path is A-C-E-G with a duration of 18 weeks.

(c) The normal expected project completion time is 18 weeks.

(d) The total project cost using normal time is RM 7600.

(e) To complete the project two weeks faster, activities C and E can be crashed for the minimum cost.

The additional cost incurred will be RM 600.

The total cost is RM 8200.

3 The inventory cost that will minimize the total cost of inventory is obtained using the formula,

TAC = IC + OC + HCS

Where TAC

= Total Annual CostIC = Inventory CostOC = Ordering CostHCS = Holding and Carrying Cost.

The probability distribution is shown below. Demand 0 1 2 3 4 5Probability 0.20 0.15 0.25 0.20 0.10 0.10

To determine the optimal order quantity and reorder policy that would minimize total cost,

the EOQ (Economic Order Quantity) model will be used.

The EOQ can be determined using the formula,

Q = √((2DCO)/CH')

Where Q = Economic Order Quantity

D = Demand'

C0 = Cost per order

H = Holding cost

C = IC per unit

Let’s assume the cost per unit, C = RM 500,

the holding cost, H = 0.2,

and demand, D = 3 units per day.

Hence,CO = RM 800 (C0 = Cost per order, which is the same as ordering cost)

Then,Q = √((2 x 3 x RM 800)/RM 100)Q = 24 units per order

Then, the reorder level can be determined using the formula,

ROL = d * LWhere L = Lead time

ROL = 3 x 5 = 15 units

The total annual cost can be determined by substituting the values into the formula,

TAC = IC + OC + HCS

where IC = 0.5 x RM 500

= RM 250OC

= (365/EOQ) x C0OC

= (365/24) x RM 800OC

= RM 12133.33HCS

= (Q/2) x H x dHCS

= (24/2) x 0.2 x 3HCS

= RM 7.20

TAC = RM 250 + RM 12133.33 + RM 7.20TAC = RM 12390.53

Hence, the order quantity that will minimize the total cost of inventory is 24 units.

To know more about paths visit:

https://brainly.com/question/31522531

#SPJ11

One situation that can make a measurement with a laser inaccurate is measuring to a heavy reflective surface

Reflective surfaces or ground-primarily based totally albedo modification (GBAM) is a sun radiation control technique of improving the Earth's albedo (the cappotential to mirror the visible, infrared and ultraviolet wavelengths of the sun, lowering warmth switch to the floor). The IPCC defined this technique as "whitening roofs, adjustments in land use control (e.g., no-until farming), alternate of albedo at a bigger scale (masking glaciers or deserts with reflective sheeting and adjustments in ocean albedo)."

The maximum famous kind of reflective floor is a kind of roof referred to as the "cool roof". While cool roofs are commonly related to white roofs, they arrive in a lot of hues and substances and are to be had for each industrial and home buildings.

Learn more about reflective surface https://brainly.com/question/1191238

#SPJ4

Answer:

Shallow foundations, often called footings, are usually embedded about a metre or so into soil. ... Another common type of shallow foundation is the slab-on-grade foundation where the weight of the structure is transferred to the soil through a concrete slab placed at the surface.

Explanation:

Because I said so.

Note that the following IP address: 192.16.5.133/29 uses 29 bits for the network and 3 bits for the host. The network mask is 255.255.255.248, which can be written in CIDR notation as "/29".

An Internet Protocol address is a numerical identification, such as 192.0.2.1, that is linked to a computer network that communicates using the Internet Protocol. The primary functionalities of an IP address are network interface authentication and location addressing.

Note that in the above address, the first 29 bits identify the network and the last 3 bits identify the host, providing 8 possible addresses within the network. The network mask, 255.255.255.248, is used to separate the network and host portions of the address, making it possible to distinguish between the two and route traffic appropriately.

Learn more about IP Addresses:
https://brainly.com/question/16011753

#SPJ1

Answer:

1. Operates machines that cut through rocks underground so natural resources can be harvested: Mine-cutting and channeling operator

2. Studies and manages natural resources to protect the environment: Conservation Scientist

3. Manages forests for conservation, human enjoyment, and harvesting: Forster

4. Inspects, measures, and classifies logs based on quality: Log grader or scaler

5. Operates machinery to cut down trees and move logs: Logging equipment Operator

Explanation:

Conservation Scientist – studies and manages natural resources to protect the environment and support human uses of natural resources

Forester – manages forests for conservation, human enjoyment, and tree harvesting

Mine Cutting and Channeling Machine Operator – operates machinery in underground mines that bring natural resources up to the surface for human use

Logging Equipment Operator – operates logging machinery, such as tractors or bulldozers

Log Grader or Scaler – inspects, measures, and classifies logs based on their quality

The careers that match the given descriptions are; Conservation Scientist, Forester , Mine Cutting and Channeling Machine Operator ,and Logging Equipment Operator.

Conservation Scientist deals with the studies and manages natural resources to protect the environment and support human uses of natural resources

Forester deals with forests for conservation, human enjoyment, and tree harvesting

Mine Cutting and Channeling Machine Operator are the operates machinery in underground mines that bring natural resources up to the surface for human use

Logging Equipment Operator are the operates logging machinery, such as tractors or bulldozers

Log Grader or Scaler deals with the inspects, measures, and classifies logs based on their quality.

The careers that match the given descriptions are; Conservation Scientist, Forester , Mine Cutting and Channeling Machine Operator ,and Logging Equipment Operator.

Learn more about the concept here;

https://brainly.com/question/1615416

#SPJ2

The diameter of the bar is 55.85 KN

A circular bar supports an axial force of 39 KN. If the compressive stress in the bar is not to exceed 80 MN/m2,

If you want to get the nominal diameter in inches, multiply the bar size by 80/39. For instance, the diameter of #8 rebar is 80/39 inches (or 1 inch). The weight, nominal area, and nominal diameter are common metrics.

The formula below may be used to determine the minimal diameter of round bar given the width and height of flat bar. Square Bar Minimum Diameter = Square Root of Flat Bar's Width and Height in Inches.

\(\sqrt{}\)80 * 39 = 55.85

The diameter of the bar is 55.85 KN

To learn more about diameter refer to:

https://brainly.com/question/23220731

#SPJ4

Answer:

try settings and go to updates?

Explanation:

Forces exerted by the jet on the plate is=3976N

A force is an effect that can change the motion of an object. A force can generate an object with mass to change its velocity, i.e., to accelerate. Force can also be explained intuitively as a push or a pull. A force has both volume and direction, making it a vector amount.

A jet of water 75m in diameter

velocity = 30m/s

The forces exerted by the jet on the plate is

F=1000×44178×10^-3×30²

=3976N

the jet on the plate work done by Is zero .

To learn more about Force, refer

https://brainly.com/question/12970081

#SPJ9

Answer:

yes

Explanation:

blueprint of the construction is a prediction of project its is slightly auto cad

Sandpaper.

Rubble.

Pyramid.

Wrinkled.

Marbled.

Given that a certain insecticide kills 70% of all insects in laboratory experiments and a sample of 8 insects is exposed to the insecticide in a particular experiment, we are required to determine the probability that no more than 5 insects will survive. We will use the binomial distribution to solve the given problem.

The binomial probability of r successes in n independent Bernoulli trials is given by:P (r) = nCrx^r(1-x)^(n-r),where nCx is the binomial coefficient, which is defined as:nCx = n! / (r! * (n-r)!).Here, x represents the probability of success and 1 - x represents the probability of failure.

In the given problem, x = 0.3, which is the probability that an insect is killed by the insecticide. Therefore, 1 - x = 0.7 is the probability that an insect survives after exposure to the insecticide.Now, we need to find the probability that no more than 5 insects will survive.

This can be done by finding the probabilities of 0, 1, 2, 3, 4, and 5 insects surviving, and adding them up.P (0) = 8C0(0.7)^0(0.3)^8 = 0.00001P (1) = 8C1(0.7)^1(0.3)^7 = 0.00026P (2) = 8C2(0.7)^2(0.3)^6 = 0.00232P (3) = 8C3(0.7)^3(0.3)^5 = 0.01260P (4) = 8C4(0.7)^4(0.3)^4 = 0.04247P (5) = 8C5(0.7)^5(0.3)^3 = 0.10292Now, the required probability is the sum of these probabilities:P (no more than 5 survive) = P (0) + P (1) + P (2) + P (3) + P (4) + P (5)= 0.00001 + 0.00026 + 0.00232 + 0.01260 + 0.04247 + 0.10292= 0.16058 (approx)

Therefore, the probability that no more than 5 insects will survive is approximately 0.1606 (rounded to four decimal places). The explanation is more than 100 words.

To know more about insects visit:

https://brainly.com/question/32317534

#SPJ11

The correct answer is A. The inputRDD is computed and the data is loaded when the count() action is applied.

In Apache Spark, transformations are lazily evaluated, meaning they are not executed immediately when defined.

The actual computation happens when an action is called on the RDD. In this case, count() is an action that triggers the computation of the RDD and returns the count of elements.

Learn more about data at:

https://brainly.com/question/30459199

#SPJ4

Answer:

Attached below is the Radial power circuit arrangement

Explanation:

Radial power circuit arrangement is done in a way that a single cable starts from the fuse box and connects to all the outlet socket contained in the circuit also the cable contains wires ( live , neutral and earth )

The advantage of a radial power circuit arrangement is that it enables easy identification of electrical faults on the circuit.

According to  fatigue cracking in flexible pavements occurs due to repeated loading from tire-pavement interaction and aging of asphalt binder. Excessive moisture content in pavements after a rainfall is not mentioned as a cause for fatigue cracking.

It mentions that higher binder content in asphalt concrete mixture and excessive moisture content can both contribute to fatigue cracking, while heavy traffic volume, bad construction quality control (QC), and dramatic temperature changes are also factors. Based on this information, the least likely cause of fatigue cracking in flexible pavements is "maximum allowable asphalt content with low viscosity asphalt in asphalt layers".

Find out more about construction

brainly.com/question/20714068

#SPJ4

The true gas temperature is 380.7°F

The temperature indicated by the thermometer if the shield were removed is 312.5°F

The error reduction owing to the use of the radiation shield is 81.2%.

As per the given data:

h_1 = 2.0 Btu/h . ft^2 .

°Fh_2 = 1.5 Btu/h . ft^2 .

°FE_s = 0.8

E = 0.2

T_1 = 600°F

T_2 = 100°F

q_T/A = h_1 (T_1 - T_T) -------------------(1), where, T_T = Thermometer temperature

q_S/A = h_2 (T_S - T_1) --------------------(2), where, T_S = Shield temperature

q_T/A = E_s . (q_T + q_S)/A --------------------(3)

T_T = (h_1.T_1 + h_2.T_S)/(h_1 + E_s.h_2)

T_S = T_1 - q_T / (h_2 + E_s.h_1)

From the above equations, T_T = 380.7°F (Approx.)

q_T = F_te.sigma.(T_T)^4

q_S = F_se.sigma.(T_S)^4

q_T without shield = sigma.(T_T)^4

q_T without shield = 1264.4 (Approx.)

q_S without shield = sigma.(T_1)^4

q_S without shield = 104.1 (Approx.)

Therefore, the temperature indicated by the thermometer if the shield were removed = (q_T without shield / sigma)^(1/4)

Temperature indicated by the thermometer if the shield were removed = 312.5°F

Error reduction = 81.2% (Approx.)

Therefore, the true gas temperature is 380.7°F, the temperature indicated by the thermometer if the shield were removed is 312.5°F, and the error reduction owing to the use of the radiation shield is 81.2%.

To know more about steady state, visit the link : https://brainly.com/question/1900452

#SPJ11

Answer:

conservation of momentum

m1v1=m2v2

Explanation:

2.5×v1= 0.0015×1400

v1= 2.1/2.5= 0.84m/s

Answer:

YAH A BLINK

Explanation:

If u are asking about softwares

then,

Software testing tools are often used to assure firmness, thoroughness and performance in testing software products.

\(#Liliflim\)

since every tool is important, it is also important that we know and learn how to use it for the coming of the day so we can fix the things that are broken to us.

The amplitude of the sinusoid is 28384 *x soít cos.

Amplitude is defined as the greatest deviation from equilibrium of a point on a vibrating body or wave in terms of displacement or distance traveled. In most cases, amplitude is calculated by looking at a wave graph and determining the height of the wave from rest. The strength or intensity of the wave is gauged by its amplitude.

Sinusoid is defined as a signal with sine wave characteristics. In the liver, spleen, and bone marrow, sinusoids and irregular tubules transport blood in place of venules and capillaries. The sine or cosine functions from trigonometry form the foundation of sinusoidal signals, which are periodic functions.

Thus the amplitude of the sinusoid is 28384 *x soít cos.

To learn more about amplitude, refer to the link below:

https://brainly.com/question/8662436

#SPJ2