What makes one type of metal different from another?

When an object is projected at angle, it will have some horizontal and vertical velocities. there no horizontal motion, projectile's horizontal component stays the same.

To determine the drag on the car when it is driven through still air at 55 mph, we need to use the formula: drag = (1/2) × density of air × velocity² × drag coefficient × cross-sectional area of the car. Assuming standard conditions, the density of air is 1.225 kg/m³ or 0.0023769 lb/ft³. Converting the velocity to ft/s, we get 80.67 ft/s. Plugging in the given values, we get:
drag = (1/2) × 0.0023769 × 80.67² × 0.21 × 30
drag = 215.3 lb
Therefore, the drag on the car when driven through still air at 55 mph is 215.3 lb. To determine the drag on the car when driven into a 25 mph wind, we need to add the velocity of the wind to the velocity of the car. Therefore, the total velocity is 80.67 + 25 = 105.67 ft/s. Using the same formula and plugging in the new velocity, we get:
drag = (1/2) × 0.0023769 × 105.67² × 0.21 × 30
drag = 337.2 lb
Therefore, the drag on the car when driven into a 25 mph wind is 337.2 lb.

Learn more about velocity here

https://brainly.com/question/18084516

#SPJ11

The drag on a car is the resistance that it experiences as it moves through the air. The drag force is proportional to the air density, the velocity of the car, the drag coefficient, and the cross-sectional area of the car. The formula to calculate drag force is:

Drag force = 0.5 x air density x velocity^2 x drag coefficient x area
In this case, the drag coefficient is predicted to be 0.21, and the cross-sectional area of the car is 30 ft2. We are given the velocity of the car, which is 55 mph.
First, we need to convert the velocity from miles per hour (mph) to feet per second (fps). We know that 1 mph is equal to 1.47 fps. Therefore:
55 mph x 1.47 fps/mph = 80.85 fps
The air density at sea level is approximately 0.00237 slugs/ft3. Therefore, we can calculate the drag on the car as follows:
Drag force = 0.5 x 0.00237 slug/ft3 x (80.85 fps)^2 x 0.21 x 30 ft2
Drag force = 131.28 pounds of force (lbf)
This means that when the car is driven through still air at 55 mph, it experiences a drag force of 131.28 lbf.
Now, let's consider the case where the car is driven into a 25 mph headwind. In this case, the velocity of the car relative to the ground is:
55 mph - 25 mph = 30 mph
We need to convert this velocity to fps:
30 mph x 1.47 fps/mph = 44.1 fps
Using the same formula as before, we can calculate the drag on the car:
Drag force = 0.5 x 0.00237 slug/ft3 x (44.1 fps)^2 x 0.21 x 30 ft2
Drag force = 48.77 lbf
This means that when the car is driven into a 25 mph headwind, it experiences a drag force of 48.77 lbf.

Learn more about drag force here:

https://brainly.com/question/13385370

#SPJ11

Echo is a reflection of sound waves.  If the distance is increased, we hear the sound in  more than twice the former time.

The term echo has to do with the reflection of sound waves. We know that when sound waves are reflected, we hear the sound as the echo.

Now, the time that it takes us to hear the echo depends on the distance between the observer and the depth of the well. If the distance is increased, we hear the sound in more than twice the former time.

Learn more about echo: https://brainly.com/question/14861578

Answer:

It increases in depth, indicates the heat flowing from earths warm interior to its surface

Raul pushes a stalled car with a force of 204 N. The average power required to move the car is 157 Watt.

The average power is given by:

P = ΔF . s / Δt

Where:

P = power

ΔF = force changes over a time period Δt

s = distance

Parameters given in the problem:

ΔF = 204 - 44 = 160 N

s = 16.3 m

Δt = 16 s

Plug these parameters into the formula,

P = ΔF . s / Δt

P = 160 x 16 / 16.3

P = 157 Watt

Hence, the required power is 157 Watt.

Learn more about power here:

https://brainly.com/question/25726319

#SPJ4

Answer:

the bottom one is wollsiegel

Answer: Push of the ball on the earth. The reaction force is equal and opposite to the action force, according to Newton's Third Law of Motion.

Explanation: In other words, when the earth pulls the ball downward with a force, the ball pushes back on the earth with an equal and opposite force. This occurs because forces are always pairs of equal and opposite forces, known as action-reaction forces. The action force is the force that initiates the interaction, while the reaction force is the force that responds to the action force. In this case, the action force is the pull of the earth on the ball, while the reaction force is the push of the ball on the earth.

The answer is W = 1.06 MJ.

Now develop and express of Force required:

                                            F = p*V*g

                                            F = 1000*(2*0.5*x*8*dx)*g

                                            F = 78480*x*dx

- Now, the work done is given by:

                                   W = F.s

Where s is the distance from the top of the hose to the differential volume:

                                        s = (5 - x)

We have the work as follows:

                              dW = 78400*x*(5-x)dx

Now integrate the following express from 0 to 3 till the tank is empty:

 W = 78400*(2.5*x^2 - (1/3)*x^3)

 W = 78400*(2.5*3^2 - (1/3)*3^3)

 W = 78400*13.5 = 1058400 J

To find the weight of water, begin by way of finding the density(1 kg/L at 39.2°) and the extent of water. Convert the volume of water to liters after which multiply by way of the density to discover the burden.

Density is useful in calculating the load of materials which can be tough to weigh. you may decide its weight without a doubt with the aid of multiplying the density by using the dimensions, or quantity, of the item.

The unique weight, additionally called the unit weight, is the weight in keeping with the unit quantity of cloth. A typically used value is the precise weight of water in the world at 4 °C (39 °F), which is nine.807 kilonewtons consistent with cubic meters or 62. 43 pounds-force in keeping with cubic foot.

Learn more about the weight density of water here https://brainly.com/question/16794306

#SPJ4

Answer: B  6.2 Hz

Explanation:  Equation for waves v = λf.

Frequency = speed / wavelength    f = v/λ

   f = 74 m/s / 12 m = 6.166... Hz

Answer:

Rounding is necessary: the answer is 6.2 Hz

Explanation:

he weights 187.393 pounds

Answer:833N

Explanation: A. P. E. X.

Explanation:

Thats actually negative acceleration . It means a runner is running with the negative velocity of 1.35 m/s in every second .

We know that

Velocity is given by the rate of change of position w.r.t time

\(\\ \sf\longmapsto v=\dfrac{dx}{dt}\)

\(\\ \sf\longmapsto vdt=dx\)

\(\\ \sf\longmapsto (u+at)dt=dx\)

\(\\ \sf\longmapsto u{\displaystyle{\int}_0^t}dt+a{\displaystyle{\int}_0^t}dt={\displaystyle{\int}^x_{x_0}}dx\)

\(\\ \sf\longmapsto ut+\dfrac{1}{2}at^2=(x-x_0)\)

\(\\ \sf\longmapsto x=x_0+ut+\dfrac{1}{2}at^2\)

Solutions for the following equations are as follows:

1. \(Yi ≤ 424 ∀ i$X_3+X_7 ≤ 1$\)

2.    \($∑_{i=1}^{7} X_i ≥ 3$\).

3. \($X_3 + X_7 ≤ 1$\)

4. \($X_6 ≥ X_4 + X_5 - 1$\)

1. Mixed-integer linear optimization model to find the minimum cost plan:

Let X be a binary decision variable, indicating whether each power plant is on or off. Then, we can use the following mathematical formulation for the problem:

minimize \($∑_{i=1}^{7} s_i X_i +∑_{i=1}^{7} c_i Y_i$\)

Subject to:

\($∑_{i=1}^{7} l_i X_i ≤ 424$\)

\(∑_{i=1}^{7} u_i X_i ≥ 424$\)

\(X_i$ ∈ {0,1} ∀ i$\)

\(Y_4+Y_5-2Y_6 ≤ 0$\)

\(Yi ≤ 424 ∀ i$X_3+X_7 ≤ 1$\)

2. Adding a Linear Constraint:

At least three plants should be turned on, which means we want\($∑_{i=1}^{7} X_i ≥ 3$\).

3. Adding a Linear Constraint:

Plant 3 and 7 can not be both turned on. This implies the linear constraint:\($X_3 + X_7 ≤ 1$\).

4. Adding a Linear Constraint:

When plants 4 and 5 are on, then plant 6 must also be on. This implies the linear constraint:\($X_6 ≥ X_4 + X_5 - 1$\).

Learn more about Linear Constraint from the given link:

https://brainly.com/question/30763796

#SPJ11

The energy needed is 35.4 KJ, to pop the corn of a given quantity, and by using latent heat of vaporization of water.

What is Energy?

When work is done and heat and light are produced, energy is the quantitative quality that is transferred to the body or to the physical system. The law of conservation of energy asserts that although energy can be changed in form, it cannot be created or destroyed. Energy is a conserved quantity.

Calculations:

The boiling point of water is 175 °C.

The mass of corn is 95.0 g.

The percentage of water in corn is 14%.

The latent heat of vaporization for water at 175 °C is 0.90 times its value at 100 °C.

Calculate the mass of water,

Mw = (14/100) × (95g) × (1kg/1000g)

      =  0.0133 Kg

calculate the latent heat of vapourization,

Lv = (0.9) × (2.26 × \(10^{6}\)J/kg)

   =  2.034 × \(10^{6}\) J/kg

Total heat required,

Q = Mw  Lv + Mw. C Δ T

Substitute the values,

Q = (0.0133) × (2.034 × \(10^{6}\)) + (0.0133) × (4186) × (175.25)

  = (35403.27 J) × ( 1KJ/ 1000J)

  = 35.4 KJ

Hence, the energy needed is 35.4 KJ, to pop the corn of a given quantity.

To know more about Energy, check out:

https://brainly.com/question/13881533

#SPJ1

One of the fundamental principles of quantum mechanics is that the behavior of subatomic particles, such as electrons, is inherently probabilistic.

This means that it is impossible to predict with complete accuracy the position or momentum of an electron at any given moment. Instead, we can only calculate the probability of finding the electron in a particular location or state.This probabilistic behavior is related to the wave-like nature of subatomic particles, which means that they do not have a well-defined position or momentum until they are observed or measured. This phenomenon is known as wave-particle duality and is a key aspect of quantum mechanics.Although the behavior of electrons is indeterminate to some degree, scientists can still make accurate predictions about their behavior using mathematical models and probability calculations. This allows us to develop technologies that rely on the principles of quantum mechanics, such as quantum computing and quantum cryptography.

To learn more about quantum click on the link below:

brainly.com/question/14273883

#SPJ4

The complete question is : An electron behaves in ways that are at least partially indeterminate. Explain this statement.

Answer:So the answer is B

Explanation: When the light rays either bend or change their direction while passing from one medium to another it is called refraction of light. The refraction of light takes place when light travels from air into glass, from glass into air, from air into water or from water into air.

The distance taken by an average driver, driving at 20 miles per hour, to apply the brakes the moment danger is detected is 44 feet.

This is based on the average reaction time of 1.5 seconds, as stated in the Smith System Driver Improvement Institute.

The stopping distance is the sum of the driver's reaction distance and braking distance.

The reaction distance is the distance that a driver covers during the reaction time.

The braking distance is the distance covered by the car from the time the brakes are applied to the time the car comes to a stop.

The distance depends on factors such as speed, road condition, and the car's condition.

In the case of an average driver moving at 20 miles per hour, the reaction distance is approximately 22 feet, given the average reaction time of 1.5 seconds.

The braking distance would also be approximately 22 feet.

the total distance taken by the car to stop is 44 feet.

The distance taken by an average driver to apply the brakes varies with different speeds.

As the speed increases, the distance taken to stop also increases.

For instance, at 30 miles per hour, the distance taken to apply the brakes would be approximately 66 feet.

At 40 miles per hour, the distance taken to apply the brakes would be approximately 110 feet.

In conclusion, the speed at which a vehicle is traveling at the moment danger is detected significantly influences the stopping distance.

To know more about average visit:

https://brainly.com/question/24057012

#SPJ11

Answer:the answer is A. Wires, a 9v battery, no resistors

Explanation:

A wire with battery of the voltage of 9 volts with no resistor has the highest value of current. The ampere is the SI unit for electric current.

The pace at which electrons travel through a conductor is known as electric current. Electrons are tiny particles that reside within a substance's molecular structure.

Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.

The Equation of Ohm's Law

V=IR

If there is no resistor, the resistance in the circuit is zero, results in the highest value of  electric current.

Voltage is directly proportional to the current. As high the value of voltage, the value of the electric current is high.

Hence, a wire with battery of the voltage of 9 volts with no resistor has the highest value of current.

To learn more about the electric current, refer to the link;

brainly.com/question/7643273

#SPJ2

The combination of the compound microscopes and refracting telescopes, operate by magnifying the image.

High levels of magnification are produced by the objective lens and eyepiece lens working together. Multiplying the objective lens' and the eyepiece lens' individual magnifications yields the microscope's overall magnification.

In a refracting telescope, the objective lens and eyepiece lens work together to produce high magnification, which makes distant objects look larger and more distinct to the spectator.

Learn more about telescopes:https://brainly.com/question/19349900

#SPJ4

Answer: I didnt understand it sorrryryyyyyyy

Explanation:

Answer:

V = 50 volts

Explanation:

Given that,

Resistance, R = 10 ohms

Current, I = 5 A

We need to find the potential difference across the circuit. We know that,

V = IR

Put all the values,

V = 5 × 10

V = 50 volts

Hence, the potential difference is equal to 50 volts.

The value of theta for the maximum height is 30°.

Calculation:-

Since the angle from the horizontal is Cosθ, therefore the angle from the vertical is sinθ.

Hmax = U² sin²θ/2g

11.25 = 30² sin²θ/2g

sin²θ = (11.25 × 2 × 10)/900

   ⇒    sin²θ   =   0.25

    ⇒   sin θ = 0.5

    ⇒   sin θ = 1/2 = 30°

The horizontal pace of a projectile is regular (in no way converting in value), and there's a vertical acceleration because of gravity; its cost is 9.8 m/s/s, down, The vertical speed of a projectile changes via nine.8 m/s every second, The horizontal motion of a projectile is impartial of its vertical movement.

Projectile motion is a form of motion experienced with the aid of an object or particle that is projected in a gravitational field, such as from Earth's floor, and movements alongside a curved route below the action of gravity best.

Projectile motion is the movement of an object thrown (projected) into the air. After the initial force that launches the item, it most effectively reports the pressure of gravity. The object is known as a projectile, and its route is called its trajectory.

Learn more about projectile motion here:-https://brainly.com/question/10680035

#SPJ9

The correct option is number 5: "Structurally they are similar and some devices are designed to operate either as motors or generators."

The primary difference between an electric motor and an electric generator is their function. An electric motor converts electrical energy into mechanical energy to produce motion, while an electric generator converts mechanical energy into electrical energy.

However, structurally, both devices are very similar and share many of the same components such as a rotor, stator, and electromagnetic field. Additionally, some devices, such as a wind turbine, can operate as both an electric generator and an electric motor, depending on the direction of the flow of energy.

The efficiency of each device can vary depending on the specific application and design, so it is not accurate to say that one is universally more efficient than the other.

Learn more about electric motor

brainly.com/question/20263608

#SPJ11

A) The triathlete's bike is 50.0 m from the shore on the land   B) the component of her distance from the bicycle along the shore is 70.0 m.

In a triathlon, a triathlete starts with swimming, then biking, and ends with running. Here, we have been given that a triathlete on the swimming leg of a triathlon is 120.0 m from the shore (a). The triathlete's bike is 50.0 m from the shore on land (b).

We need to find the component of her distance from the bicycle along the shore. Component of her distance from the bicycle along the shore In the above set, we can see that the triathlete is swimming in a straight line towards the shore, while the bike is on the land. We need to find the component of her distance from the bicycle along the shore. T

his component is represented by the horizontal distance (d) between the point where the swimmer hits the shore and the bike (50.0 m from the shore).Therefore, the component of her distance from the bicycle along the shore is d = 120.0 m - 50.0 m = 70.0 m. Therefore, the component of her distance from the bicycle along the shore is 70.0 m.

Know more about shore here:

https://brainly.com/question/14704653

#SPJ11

DPP is a method of capital budgeting. It is the length of time required to recover the initial cash outflow discounted at a specific interest rate.

(i) Discounted Payback Period (DPP): It is a method of capital budgeting. It is the length of time required to recover the initial cash outflow discounted at a specific interest rate. Benefit/Cost Ratio (BCR): It is the ratio of the present value of benefits to the present value of costs. It is used in cost-benefit analysis to identify whether a proposed project or investment is feasible.

(ii) Elements of Bookkeeping: Cash book, purchase book, sales book, journal, ledger. Profit and Loss Account: It is an account that records a company's profits and losses for a specific period of time.

(iii) Common important finance ratios are: Current Ratio, Quick Ratio, Debt-Equity Ratio, Inventory Turnover Ratio, Debt-Service Coverage Ratio.

(iv) BFD, PFD & PID: Block Flow Diagram (BFD), Process Flow Diagram (PFD), and Piping and Instrumentation Diagram (PID) are used to illustrate the process flow.

(v) Gantt Chart: A Gantt chart is a project management tool that uses horizontal bars to represent the duration of tasks or activities in a project.

(vi) Ethics & Professionalism: Ethics and professionalism are the practices that professionals in a particular field must adhere to. It includes the principles of honesty, transparency, fairness, and accountability.

(vii) Heuristics for Storage Vessels and Pressure Vessels: Heuristics for storage vessels and pressure vessels include choosing the correct diameter to height ratio, selecting the right material of construction, designing suitable supports, and selecting appropriate insulation.

(viii) Heuristics for Reactors and Heat Exchangers: Heuristics for reactors and heat exchangers include determining the appropriate size and shape, selecting the right material of construction, and designing suitable internals.

(ix) Heuristics of Distillation and Absorption Towers: Heuristics for distillation and absorption towers include choosing the correct column diameter, selecting appropriate packing materials, and designing suitable feed locations.

To know more about initial cash:

https://brainly.com/question/31786139

#SPJ11

When a fragment of bone containing carbon-14 isotopes of the element carbon is discovered during an archaeological dig, and it is estimated to be approximately 23,000 years old, one can calculate the proportion of the carbon-14 isotopes that remains.

For such more question on Proportion  

https://brainly.com/question/1496357

#SPJ8

By setting up and solving the differential equation for N3(t), we can determine the population of the stable daughter nucleus over time.

To solve the differential equation for N3(t), we need to establish the rate of change of the population of the stable daughter nucleus. This rate is determined by the decay of the parent nucleus (N1) into the daughter nucleus (N2) and the subsequent decay of N2 into the stable daughter nucleus (N3).

By considering the decay rates and applying the principles of radioactive decay, we can set up and solve the differential equation to find the population of N3 as a function of time (t).

The sum of N1(t), N2(t), and N3(t) represents the total population of all three nuclei at any given time. This total population is conserved throughout the decay process. As the parent nucleus decays into the daughter nucleus, and the daughter nucleus further decays into the stable daughter nucleus, the total population remains constant.

Therefore, N1(t) + N2(t) + N3(t) provides valuable insight into the overall decay process and allows us to track the total number of radioactive nuclei present.

Examining N1(t), N2(t), and N3(t) at small intervals of time enables us to observe the changes in population for each nucleus. This analysis helps us understand the relative populations and decay rates of the nuclei involved. By comparing the rates of decay for N1, N2, and N3, we can gain insights into the relative stability of each nucleus and the progression of the decay process.

As time approaches infinity, the decay process reaches a state of equilibrium. In this state, the decay rates for N1, N2, and N3 become negligible, and the populations of each nucleus stabilize. The equilibrium values represent the limiting values of N1(t), N2(t), and N3(t) as t tends to infinity. Interpreting these limits allows us to understand the long-term behavior of the decay process and the stable populations of each nucleus.

Learn more about Equation

brainly.com/question/29657983

#SPJ11

Answer:

F L = W * L/2    

F = W / 2 = 42.5 N

The crowbar is uniform and can be replaced by a point mass of 85 N at distance of L/2 and the applied force is at a distance of L

The process of converting sound waves into neural impulses is called "transduction". This process occurs in the inner ear, specifically in the cochlea,

As sound waves enter the ear, they pass via the outer ear and the ear canal before striking the eardrum. The eardrum vibrates in reaction to sound waves, and these vibrations are subsequently passed to the ossicles, which are three small bones in the middle ear. The ossicles amplify and transport vibrations to the inner ear, where the transduction process takes place.

The cochlea, a spiral-shaped structure filled with fluid, is part of the inner ear. Thousands of microscopic hair cells inside the cochlea are responsible for converting sound waves into nerve impulses. The vibrations from the ossicles force the hair cells to bend and move as they pass through the fluid in the cochlea. This movement causes the hair cells to release chemicals, which generate an electrical signal, which is subsequently sent to the brain through the auditory nerve.

These neuronal impulses are carried by the auditory nerve to the brainstem, where they are processed and assessed. The impulses then go to several sections of the brain, including the auditory cortex, where they are perceived as sound.

For more such questions on sound waves, click on:

https://brainly.com/question/16093793

#SPJ4