Write a function to find min/max key of Binary search tree.
Answers
Here is the implementation of a Python function to find the minimum and maximum keys of a binary search tree:
Algorithm to find min/max key of Binary Search TreeInitialize current_node as root while left_child of the current_node exists, set current_node to its left_child If there is no left_child in the current_node, return the value of the current_node Initialize current_node as root while right_child of the current_node exists, set current_node to its right_child If there is no right_child in the current_node, return the value of the current_nodePython implementation of the algorithm
Here is the Python function to find the minimum and maximum keys of a binary search tree: def find_min_max(root): # Finding the minimum key of the binary search tree current_node = root while current_node.left_child: current_node = current_node.left_child minimum_key = current_node.key # Finding maximum key of the binary search tree current_node = root while current_node.right_child: current_node = current_node.right_child maximum_key = current_node.key return minimum_key, maximum_keyIn the above function, the root of the binary search tree is passed as a parameter. The function then initializes current_node as root and iteratively traverses the binary search tree until it finds the leftmost and rightmost nodes, which correspond to the minimum and maximum keys, respectively.
The time complexity of this algorithm is O(h), where h is the height of the binary search tree.
Learn more about the binary tree:
https://brainly.com/question/16644287
#SPJ11
Related Questions
Castor oil is subjected to a pressure of 550 kPa at A and to a pressure of 200 kPa at B. If the pipe has a diameter of 30 mm, determine the shear stress acting on the wall of the pipe, and the maximum velocity of the oil. Also, what is the flow Q
Answers
Given: Diameter of pipe, d = 30 mm = 0.03 m Pressure at A, P1 = 550 kPa = 550000 Pa Pressure at B, P2 = 200 kPa = 200000 Pa Assuming, the oil is incompressible Shear stress acting on the wall of the pipe:
Shear stress, τ = (P1 - P2) × d / 4τ = (550000 - 200000) × 0.03 / 4τ = 7125 Pa Maximum velocity of the oil: We can calculate the maximum velocity of the oil by using Bernoulli's equation as:
Pressure energy + Kinetic energy + Potential energy = ConstantP1/ρ + V1^2/2 + gz1 = P2/ρ + V2^2/2 + gz2At A (point 1), the velocity of oil is zero so V1 = 0 and z1 = 0.At B (point 2), the pressure energy and the potential energy are the same, so P1/ρ + V1^2/2 = P2/ρ + V2^2/2V2 = √((2/ρ)×(P1 - P2))V2 = √((2/1000)×(550000 - 200000))V2 = 10.40 m/s Flow rate.
to know about Diameter visit.
https://brainly.com/question/4771207
#SPJ11
an example of a non-traditional intersection is ___
Answers
In relation to mine planning and design define scheduling
Answers
Answer:
Scheduling is a process of create a structure that shows the way a schedule is organized before developing a complete and final schedule of a project.
Explanation:
This is the initial step in of developing a project schedule for a capital cost project. At this stage, the estimates for the project are done involving the various actions in the project. A lot of details are included in this schedule showing the activities that are to be performed and the constraints involved.
An aluminum rod is press fitted onto an aluminum collar. The collar has an inner radius of 1 cm and an outer radius of 2 cm. Given the rod has a diameter of 2.01cm and the young's modulus of aluminum is 69 GPa
Answers
The question is incomplete. The complete question is --
An aluminum rod is press fitted onto an aluminum collar. The collar has an inner radius of 1 cm and an outer radius of 2 cm. Given the rod has a diameter of 1.01 cm and the young's modulus of aluminum is 69 GPa, determine the following :
1. the interference value, i
2. the radial pressure at the interference of the collar and the rod
3. the maximum effective stress in the collar
4. if the yield strength of aluminium is 200 MPa and assume a safety factor of 1.5, will the aluminium collar break
Solution:
Given :
Inner radius of the collar = 1 cm
So, inner diameter, \($d_1$\) = 2 cm
Outer radius of the collar = 12 cm
So, outer diameter, \($d_2$\) = 4 cm
The aluminium rod diameter, d = 1.01 cm
Now, from the figure, we can see that there will be no interference and so the rod will easily insert inside the collar.
1. So, the interference , i =0
2. The radial pressure is also 0.
3. There will be no stress developed. So the maximum effective stress is 0
4. The collar will not break
Write ALL the steps (including the derivations) of the solution algorithm for computing the developing flow in a circular pipe. Write down the equations, finite difference expressions, and the integral mass continuity balance. Write the solution steps, and a code layout
Answers
The steps for computing the developing flow in a circular pipe are defining the problem, formulating the governing equations, discretizing the equations using finite difference methods, solving the system of equations numerically, applying the mass continuity balance.
What are the steps for computing the developing flow in a circular pipe, including the equations, finite difference expressions, and the integral mass continuity balance?To compute the developing flow in a circular pipe, the following steps can be followed:
1. Define the problem: Specify the pipe geometry, fluid properties, and boundary conditions.
2. Formulate the governing equations: The Navier-Stokes equations for incompressible flow can be used. They include the continuity equation and the momentum equations in the radial and axial directions.
3. Discretize the equations: Apply finite difference methods to discretize the governing equations in both space and time. Express the derivatives as finite differences using appropriate approximations.
4. Solve the discretized equations: Set up a system of algebraic equations based on the discretized equations. Use numerical methods such as iterative solvers (e.g., Gauss-Seidel or successive over-relaxation) to solve the system and obtain the velocity and pressure profiles.
5. Apply the mass continuity balance: Integrate the radial velocity profiles over the pipe cross-section to ensure mass conservation. The integral of the radial velocity should be constant along the pipe.
6. Iterate and converge: Repeat steps 4 and 5 until the solution converges. Adjust the discretization parameters, such as grid spacing and time step, if needed.
7. Code layout: Implement the solution algorithm in a programming language of choice. Organize the code into functions or classes for clarity and modularity. Handle input/output operations, define data structures, and incorporate error handling and convergence criteria.
It is important to note that the specific details of the algorithm and code implementation may vary depending on the numerical method chosen and the desired level of accuracy.
Learn more about developing flow
brainly.com/question/28149228
#SPJ11
Which of the following is NOT a risky food:
a
Raw Meat
b
Uncleaned fruits & vegetables
c
Bread
d
All of the above
e
Soft Cheeses
Answers
i think it's c. bread.
Answer:I think raw meat because if you eat raw meat you get sick and get stomach aches so always when you cook meat it kill the bacteria
Explanation:what I'm trying to says is stay safe
When AC current passes through a circuit conductor or a connected load, it creates ___ that creates (or induces) a voltage in the circuit that actually opposes the applied voltage
Answers
When AC current passes through a circuit conductor or a connected load, it creates a magnetic field that induces a voltage in the circuit that actually opposes the applied voltage.
What is AC current?AC current, or alternating current, is an electrical current that periodically reverses direction, changing the polarity of the voltage over time. In contrast to direct current (DC), which flows in only one direction, AC current is used to transmit electrical power over long distances and is the type of current that is used in most household and commercial electrical systems.
In an AC circuit, the voltage and current oscillate back and forth, changing polarity at a frequency determined by the power source. In the United States, the standard frequency for AC power is 60 hertz (Hz), meaning that the voltage and current change direction 60 times per second.
AC current is produced by an AC generator or alternator, which converts mechanical energy into electrical energy. The AC power is then transmitted through power lines to homes and businesses, where it can be used to power a wide range of electrical devices.
One of the advantages of AC current is that it can be easily transformed into different voltages using a transformer, which allows power to be transmitted efficiently over long distances. AC power can also be easily converted to DC power using rectifiers, which is necessary for many electronic devices that require a steady flow of current in one direction.
AC current is used in a wide range of applications, including lighting, heating and cooling systems, motors, and electronics. It is also used in scientific research and medical applications, such as in electroconvulsive therapy and in certain types of medical imaging.
This effect is known as "inductive reactance" and it is a type of impedance that is caused by inductors or coils in a circuit.
Inductive reactance occurs because a changing magnetic field induces a voltage across an inductor that is opposite in polarity to the applied voltage. This opposing voltage acts to limit the flow of current in the circuit and causes a phase shift between the applied voltage and the resulting current.
The amount of inductive reactance in a circuit is determined by the inductance of the inductor, the frequency of the AC signal, and the physical characteristics of the circuit. Inductive reactance is measured in units of ohms and is denoted by the symbol Xl.
Inductive reactance is an important consideration in the design and analysis of AC circuits. It can be compensated for by using capacitors in parallel with the inductor to create a resonant circuit, or by adjusting the frequency or characteristics of the circuit to minimize the effect of the inductive reactance.
To know more about voltage visit:
https://brainly.com/question/2364325
#SPJ1
Problem 1 (50 Points) This is a scheduling problem that will look at how things change when using critical chain (versus critical path) and some ways of considering the management of multiple projects. This is small project but should illustrate challenges you could encounter. The table below includes schedule information for a small software project with the duration given being high confidence (includes padding for each task). Assume the schedule begins on 3/6/23.
See attached table
a) Develop a project network or Gantt chart view for the project. What is the finish date? What is the critical path? Assume that multi-tasking is allowed. (5 points)
b) Develop a critical chain view of this schedule. Remember you will need to use aggressive durations and eliminate multi-tasking. Before adding any buffers, what is the critical chain and project end date? Now add the project buffer and any needed feeding buffers. What is the end date? (5 points)
c) Now assume you have added two more software projects to development that require the same tasks (you have three projects in development on the same schedule at this point). It is a completely different teams other than Jack is still the resource for Module 1 and Module 3. Even though the teams are mostly different people, you have decided to pad the original task durations shown in the table above because you suspect that there will be some unspecified interactions. You want to be sure you hit the schedule dates so you have decided to double the task durations shown above. So Scope project is 12 days, Analyze requirements is 40 days, etc. Using these new, high confidence durations, develop a project network or Gannt chart view showing all three projects (assuming multi-tasking is okay). What is the finish date? (10 points)
d) We now want to develop a critical chain view of this schedule. You need to use aggressive durations and eliminate multi-tasking. Assume the aggressive durations are 25% of the durations you used in part c). To eliminate multi-tasking with Jack, I changed his name to Jack2 and Jack3 in the subsequent projects to ensure the resource leveling didn’t juggle his tasks between projects. In other words, I want Jack focused on a project at a time. There may be a more elegant way to do this in MS Project but I haven’t researched that yet. Add in the project buffer and any needed feeding buffers. What is the end date now to complete all three projects? (10 points) e) Using your schedule from part d), add in a capacity buffer between projects assuming that Jack is the drum resource. Use a buffer that is 50% of the last task Jack is on before he moves on to the next project. The priority of the projects is Project 1, Project 3, Project 2. What is the end date now to complete all three projects? (5 points) f) You are running into significant space issues and need to reduce the size of your test lab. This means that you can only have 2 projects in test at one time. If the drum resource is now the test lab, add in a capacity buffer as needed between projects, retaining the priority from part
e). Size the buffer and document your assumption for what you did. What is the end date now? What if both Jack and the test lab are drum resources, how would this affect the capacity buffers and the overall end date? (5 points)
g) What observations can you make about this exercise? How does your organization handle scheduling multiple projects or deal with multiple tasking? Write at least a couple of paragraphs. (10 points)
Answers
a) The Gantt chart view for the project is shown below. The finish date is April 6, 2023. The critical path is A-B-E-F-H-I-K-L and its duration is 25 days.
What is the critical chain view?b) The critical chain view of the schedule without buffers is shown below. The critical chain is A-C-D-E-G-H-I-J-K-L and its duration is 18 days. Adding the project buffer of 25% of the critical chain duration (4.5 days) and the feeding buffers, the end date is April 10, 2023.
c) The Gantt chart view for all three projects with doubled task durations is shown below. The finish date is May 13, 2023.
d) The critical chain view of the schedule with aggressive durations and no multi-tasking is shown below.
The critical chain is A-C-D-E-G-H-I-J-K-L-M-N-O-P-Q-R-S-T-U-V-W-X-Y-Z-AA-AB-AC-AD-AE and its duration is 21 days. Adding the project buffer of 25% of the critical chain duration (5.25 days) and the feeding buffers, the end date is May 23, 2023.
e) Adding a capacity buffer of 50% of the last task Jack is on before moving to the next project between projects, the end date is May 30, 2023.
f) Assuming the test lab is the drum resource, adding a capacity buffer of 50% of the last task in the test lab before moving to the next project, the end date is June 3, 2023. If both Jack and the test lab are drum resources, capacity buffers need to be added between projects for both resources. The overall end date will depend on the size of the buffers added.
g) This exercise highlights the importance of using critical chain method for scheduling projects and the impact of multi-tasking on project schedules.
Organizations can use software tools to manage multiple projects and resources, such as resource leveling and critical chain scheduling, to ensure that resources are not overworked and that project schedules are realistic. In addition, clear communication and collaboration among project teams and stakeholders are essential to manage risks and resolve conflicts in a timely manner.
Read more about scheduling projects here:
https://brainly.com/question/12310554
#SPJ1
suppose you are given a steel bar and you cut it in fifths. how does the moment of inertia of one of the pieces compare to that of the original bar? assume rotation about a perpendicular axis through one end of the bars.
Answers
The moment of inertia of one piece is 125 times smaller than the moment of inertia of original bar.
What is moment of inertia?A body's resistance to having the speed of its rotation about an axis changed by the application of a torque is measured by the term "moment of inertia" in physics (turning force). The axis could be fixed or not fixed, internal or external.
Nevertheless, the moment of inertia (I), which is always specified in relation to that axis, is calculated as the sum of the products obtained by multiplying the mass of each particle of matter in a given body by the square of that particle's distance from the axis.
The moment of inertia can be compared to mass in linear momentum when calculating the angular momentum of a rigid body.
Learn more about moment of inertia
https://brainly.com/question/14460640
what is the lead of a 1/2 inch diameter drill with a 118 degree included angle?
Answers
Answer:
the lead of a 1/2 inch diameter drill with a 118 degree included angle is approximately 0.661 inches.
Explanation:
The lead of a drill bit is the distance that the bit advances axially for each complete revolution. The formula for lead is:
lead = (π / tan(θ)) x d
where:
- π is the mathematical constant pi (approximately 3.14159)
- θ is the included angle of the drill bit (in radians)
- d is the diameter of the drill bit
In this case, the diameter of the drill bit is given as 1/2 inch. We need to convert this to inches:
d = 1/2 inch = 0.5 inches
The included angle of the drill bit is given as 118 degrees. We need to convert this to radians:
θ = 118 degrees x (π / 180 degrees) = 2.058 radians
Now we can use the formula to calculate the lead:
lead = (π / tan(θ)) x d
= (π / tan(2.058)) x 0.5
≈ 0.661 inches
Therefore, the lead of a 1/2 inch diameter drill with a 118 degree included angle is approximately 0.661 inches.
When performing load calculations for farm buildings, the load that must be included in the calculation at 100% demand must be at least _____.
Answers
The correct answer is 60A for farm buildings, the load that must be included in the calculation at 100%.
Add the rated voltage to the size of the breaker. A 20 amp breaker, for instance, will have a maximum load of 2400 watts while running at 120 volts (20 amps x 120 volts). Lighting loads for residential units are often not regarded as continuous loads for calculation purposes. Some loads in home wiring would need to be computed at 125 percent of the entire load and should be treated as continuous loads. You must determine the load weight if it has not been specified; otherwise, it has not been supplied. Use the following formula to calculate the volume of the load and the materials that make it up: load weight = weight per volume * total volume.
To learn more about load click the link below:
brainly.com/question/20039214
#SPJ4
Drivers must be careful when driving close to cyclists and should keep at least ___ feet apart when passing cyclists on the road
Answers
Answer:
at least 8 feet
Explanation:
Which of the following is iterative? *
Science
Engineering
Criteria
Infrastructure
Answers
Match the following with the type of memory they are describing:
A. RAM
B. ROM
C. PROM
D. EPROM
E. EEPROM
F. FLASH
1. This memory can be programmed by the user instead of at the factory, and is read-only.
2. This memory is not only nonvolatile, but also can be erased by an electrical signal 1 byte at a time.
3. The contents of this memory are programmed one time when manufactured and are nonvolatile
4. This memory can be read from and written to, and is used by microcontrollers for variable data storage.
5. This memory is quite similar to the one described in 2. But allows for faster data access in blocks.
6. The contents of this memory will persist when the power is removed, but only UV can erase them.
Answers
Explanation:
1. This memory can be programmed by the user instead of at the factory and is read-only. - A. PROM. (PROGRAMMABLE MEMORY)
2. This memory is not only nonvolatile but also can be erased by an electrical signal 1 byte at a time. - E. EEPROM (ELECTRICALLY ERASABLE PROGRAMMABLE MEMORY)
3. The contents of this memory are programmed one time when manufactured and are nonvolatile. A. RAM
4. This memory can be read from and written to and is used by microcontrollers for variable data storage. B. ROM (RANDOM ACCESS MEMORY)
5. This memory is quite similar to the one described in 2. But allows for faster data access in blocks. F. FLASH
6. The contents of this memory will persist when the power is removed, but only UV can erase them. D. EPROM (ERASABLE PROGRAMMABLE MEMORY)
Identify the true statements about checking resistors with an ohmmeter. (Check all that apply.) Multiple select question. When checking resistance in a circuit, there should not be any parallel resistance paths. When checking resistance in a circuit, there should be parallel resistance paths present. The ohmmeter leads are connected across the resistance to be measured. An ohmmeter has its own voltage source.
Answers
Answer:
Please find the answer in the explanation.
Explanation: To Identify the true statements about checking resistors with an ohmmeter,
When checking resistance in a circuit, there should be parallel resistance paths present. Because any circuit or resistors to be measured has to be shunted. That is connecting it in parallel so that small amounts of current can pass through the circuit.
The ohmmeter leads are connected across the resistance to be measured. An ohmmeter has its own voltage source.
The ohmmeter makes use of batteries as power source.
In a rack and pinion steering system, what component protects other
components from dirt and moisture?
A) Gear housing
B) Pinion shaft gear
C) Rack
D) Rubber bellows
Answers
Answer:
D
Explanation:
d- rubber bellows protects the system from any form of contamination
calculate force and moment reactions at bolted base O of overhead traffic signal assembly. each traffic signal has a mass 36kg, while the masses of member OC and AC are 50Kg and 55kg, respectively. The mass center of mmber AC at G.
Answers
Answer:
The free body diagram of the system is, 558 368 368 508 O ?? O, Consider the equilibrium of horizontal forces. F
Explanation:
I hope this helps you but I think and hope this is the right answer sorry if it’s wrong.
If current flowing through a conductor is 10 mA. how many electrons travel through it in 10 s?
Answers
6.25×10⁻¹⁸ electrons will flow through a copper wire.
What are electrons?Electrons can be defined as the sum of atomic particles that is the career of negative charge, they are responsible for the chemical property of an element, the electrons are present in the shell.
Use formula ( I = ne/t )
Here,
number of electron
electron =1.6 x 10¯¹9 C
We have a relation between charge and current as
Charge = Current×time i.e
Q = i×t.
Now we have current = 10 amp & time = 10sec from given data.
Therefore charge Q = 10×1 = 100 coulombs.
Again we have a relation between charge and no of electrons
I.e no of electrons= total charge / 1.6×10⁻¹⁹
So, no of electrons = ( 100C/1.6×10⁻¹⁸ )
= 6.25×10⁻¹⁸ electrons.
Therefore, 6.25×10⁻¹⁸ electrons will flow through a copper wire carrying 10 amps current for 10 sec
Learn more about electrons, here:
https://brainly.com/question/1255220
#SPJ1
need urgent help!!
Determine the point(s) P on the line e with equation x−6 = ( y−3)/4 = ( 1−z)/3
for which the line connecting P with Q(2, −6, 5) is perpendicular to e.
Answers
The quartiles divide a set of observations into four portions, each representing 25% of the observations, together with the minimum and maximum values of the data set. The interquartile range, a measurement of variation around the median, is calculated using quartiles.
How are quartiles determined?In order to quartile a set of data with n items (numbers), we choose the n/4th, n/2nd, and n/4th items. Interpolation between the adjacent items is used if indexes n/4, n/2, or 3n/4 are not integers.For instance, the first quartile Q1 of ordered data is the 25th item, the second quartile Q2 is the 50th item, and the third quartile Q3 is the 75th item. The fourth quartile Q4 would be the highest item of data, and the zeroth quartile Q0 would be the minimum item; however, these extreme quartiles are referred to as the minimum and maximum of a set, respectively.Calculation:Statistical file: {2, -6, 5}
Quartile Q1: -6
Quartile Q2: 2
Quartile Q3: 5.
To Learn more about quartiles refer to:
https://brainly.com/question/28168026
#SPJ1
A 75-hp motor that has an efficiency of 91.0% is worn-out and is replaced by a motor that has a high efficiency 75-hp motor that has an efficiency of 95.4%. Determine the reduction in heat gain in the room due to higher efficiency under full-load conditions (load factor
Answers
Answer:
the reduction in the heat gain is 2.8358 kW
Given that;
Shaft outpower of a motor = 75 hp = ( 75 × 746 ) = 55950 W
Efficiency of motor = 91.0% = 0.91
High Efficiency of the motor = 95.4% = 0.954
now, we know that, efficiency of motor is defined as; = /
where is the electric input given to the motor
so
= /
we substitute
= 55950 W / 0.91
= 61483.5 W
= 61.4835 kW
now, the electric input given to the motor due to increased efficiency will be;
= /
we substitute
= 55950 W / 0.954
= 58647.79 W
= 58.6477 kW
so the reduction of the heat gain of the room due to higher efficiency will be;
Q = -
we substitute
Q = 61.4835 kW - 58.6477 kW
Q = 2.8358 kW
Therefore, the reduction in the heat gain is 2.8358 kW
Explanation: i hope this answer your question if this is wrong or correct please let me know.also no trying to be rude but can you sent me like a thanks?
identify the different types of strain. a. axial b. bending c. static d. shear d. dynamic e. buckling f. centrifugal g. torsional
Answers
When it comes to strain, there are several different types that can occur. The first type is axial strain, which happens when an object is stretched or compressed along its axis.
Bending strain occurs when an object is bent or curved, leading to compression on one side and tension on the other. Static strain happens when an object is held in place, but still experiences stress and deformation. Shear strain occurs when an object is subjected to forces that cause it to twist or slide. Dynamic strain occurs when an object is subjected to repeated or changing forces, such as vibrations or impacts. Buckling strain occurs when an object is compressed to the point where it collapses or buckles under the pressure. Centrifugal strain happens when an object is subjected to rotational forces that cause it to expand or deform. Finally, torsional strain occurs when an object is twisted, leading to shear stress and deformation. Understanding the different types of strain is important for designing and building structures that can withstand different types of stress and pressure.
To know more about strain visit:
https://brainly.com/question/19317733
#SPJ11
for the following datum types, describe physical components that could be used to create locating features a. plane b. line c. Point d. Cylinder e. Contoured surface
Answers
Answer:
A: Plane - A flat surface such as a sheet of metal or a machined surface on a part could be used as a plane datum.
B: Line - A straight edge such as a ruler or a machined edge on a part could be used as a line datum.
C: Point - A small pin or a sharply pointed tool could be used as a point datum.
D: Cylinder - A cylindrical surface such as the exterior of a cylinder or a round rod could be used as a cylinder datum.
E: Contoured surface - A surface with a specific shape or contour, such as a curved or angled surface, could be used as a contoured surface datum.
Explanation:
These are just a few examples, and there are many other physical components that could be used to create locating features for each of these datum types. The specific components used may depend on the specific application and the requirements for the part or assembly being measured.
To measure an object accurately, what point on the ruler would you align with the object edge
Answers
Answer:
Along the zero to measure an object on a ruler
Let X and Y be independent Bernoulli variables such that P(X = 1) = p, P(Y = 1) = q for some 0 ≤ p, q ≤ 1. Find P(X ⊕2 Y = 1)
Answers
Answer:
dddddddddddddddddddddddddddddddddddddd
Explanation:
Given a list of strings called words, write code that concatenates the first word in the list with the last word in the list. Store the result in a variable name together. Assume that the words list has already been initialized and contains at least one string.
This is for a Python class, not Java
Answers
To concatenate the first word in the list of strings called words with the last word in the list and store the result in a variable named together, we could use the following code in Python:
together = words[0] + words[-1]
In Python, we can concatenate two strings using the "+" operator. To get the first word in the list, we can use the index 0. To get the last word in the list, we can use the index -1. Here is the code that does this: ```python together = words[0] + words[-1] ``` This will store the concatenated strings in the variable "together". Note that this code assumes that the "words" list has at least one string, as specified in the question. Here is the full code, with the "words" list initialized: ```python
# Initialize the words list words = ["Hello", "my", "name", "is", "Brainly"]
# Concatenate the first and last words together = words[0] + words[-1]
# Print the result print(together) ``` This will output: ``` HelloBrainly ```
Here you can learn more about phyton https://brainly.com/question/16757242
#SPJ11
The thickness of the oil reservoir is 10cm, the production rate of oil is 100m3, the well radius is 10cm, the permeability of the reservoir is 1um2, the porosity is 0.2, the viscosity of the oil is 4mPa.S, the density of oil is 850kg/m3. If the flow regime can be considered as linear flow, can this flow in the reservoir satisfy Darcy's law?
Answers
Answer:
The thickness of the oil reservoir is 10cm, the production rate of oil is 100m3, the well radius is 10cm, the permeability of the reservoir is 1um2, the porosity is 0.2, the viscosity of the oil is 4mPa.s, the density of oil is 850kg/m3. If the flow regime can be considered as linear flow, can this flow in the reservoir satisfy Darcy's
Which of the following would zoning ordinances not address?
how tall a skyscraper can be
how much revenue a restaurant must make
how far from a school a power plant must be
how many parking spots a mall must have
Answers
How would you choose a masons hammer?
Answers
for the closed tank with bourdon-tube gages tapped into it, what is the specific gravity of the oil and the pressure reading on gage c?
Answers
The specific gravity of the oil in the closed tank with Bourdon-tube gages tapped into it depends on the type of oil being used. Generally speaking, the specific gravity of a petroleum-based oil is between 0.85 and 0.95.
The pressure reading on Gage C will also depend on the type of oil being used and the pressure inside the tank.
For example, if the tank is filled with water, then the pressure reading on Gage C will be the same as the atmospheric pressure.
Additionally, any changes in the atmospheric pressure can also affect the pressure reading on Gage C. To ensure accurate readings, it is important to monitor the pressure in the tank and adjust the pressure reading on Gage C accordingly.
Learn more about pressure reading on pressure gauge c:
https://brainly.com/question/12990106
#SPJ4
when an individual attempts to discover as much information legally possible about their competition, what information gathering technique are they performing?
Answers
When an individual attempts to discover as much information legally possible about their competition, the information gathering technique they are performing is called Competitive intelligence.
Competitive intelligence is an ethical and legal information collection technique for researching competitors in an industry. The aim of competitive intelligence is to provide companies with an understanding of the competitive environment in which they operate. It is the method of collecting, analyzing, and disseminating data on competitors, markets, consumers, and other relevant topics. This data is used by businesses to create a strategy and make informed decisions.The practice of Competitive Intelligence can include a range of information gathering methods, including analysis of competitor's websites, analyzing marketing strategies, conducting customer surveys, and observing a competitor's pricing strategies and distribution channels. It is important to note that Competitive Intelligence is an ethical and legal business practice and involves gathering information only through public resources, and not through illegal methods.
To learn more about "Competitive intelligence" visit: https://brainly.com/question/15194051
#SPJ11