you are replacing the motherboard of an hp laptop. which type of motherboard should you use?

Answer:

The correct statement that supports the benefits of computer-aided design (CAD) is "time and materials are saved."

Explanation:

CAD allows designers to create and modify designs quickly and easily using a computer, rather than having to create physical prototypes or drawings. This can significantly reduce the time and materials needed to create and revise designs, as changes can be made digitally rather than having to create new physical models or drawings.

Option A ("privacy is increased") is not a benefit of CAD.

Option B ("designers do not have to be creative") is incorrect because CAD does not replace the need for creativity and design skills.

Option C ("businesses have more control over their designs") is a potential benefit of CAD, but it is not the primary benefit of the technology.

Answer:

Talent Show Registration

Explanation:

Boolean is True or False so the only one that is true or false is Talent Show Registration as there is Yes and No

Answer:

It uses operators such as AND, OR, and NOT.

It holds a TRUE or FALSE value.

It is named after a nineteenth-century mathematician and logician

Explanation: Just did it on edg

Answer:

It uses operators such as AND, OR, and NOT.

It holds a TRUE or FALSE value.

It is named after a nineteenth-century mathematician and logician

Explanation:

Got it correct on edge

Answer:

Yes, and No it does not hurt their opportunities

Explanation:

The main goal of video journalism is to get their work in front of as many people as possible so they can share their stories with the entire world. These platforms allow for this to happen. Smartphones, Computers, On-demand video platforms, etc. all allow Video Journalists to publish their work in various different platforms and formats in order to get their work seen by hundreds, thousands, or even millions of individuals. Therefore, It does not hurt video journalists, but instead encourages them and helps them further their work by creating more opportunities.

Yes, the SELECT clause list can have a computed value like in the example below: select partname, unitprice * numberonhand from warehouse.

What is a computed value?

A computed value is a value that is derived from an expression or calculation. These values can be returned in the result set when we select a database table. The value in the SELECT clause can be a simple column value, a mathematical expression, or even a function or procedure call.

If we look at the example that you have provided, the SELECT statement selects the partname and the product of the unitprice and the numberonhand columns in the warehouse table.

Learn more about computed value:https://brainly.com/question/30390056

#SPJ11

Answer:

It is a process that extracts information from internal and external databases, transforms it using a common set of enterprise definitions, and loads it into a data warehouse.

Explanation:

Extraction, transformation, and loading can be defined as a process that extracts information from internal and external databases, transforms it using a common set of enterprise definitions, and loads it into a data warehouse.

A database management system (DBMS) can be defined as a collection of software applications that typically enables computer users to create, store, modify, retrieve and manage data or informations in a database. Generally, it allows computer users to efficiently retrieve and manage their data with an appropriate level of security.

A data dictionary can be defined as a centralized collection of information on a specific data such as attributes, names, fields and definitions that are being used in a computer database system.

In a data dictionary, data elements are combined into records, which are meaningful combinations of data elements that are included in data flows or retained in data stores.

This ultimately implies that, a data dictionary found in a computer database system typically contains the records about all the data elements (objects) such as data relationships with other elements, ownership, type, size, primary keys etc. This records are stored and communicated to other data when required or needed.

You can produce evenly spaced floating-point ranges with NumPy’s linspace function. Generate a linear array between 5 and 15 with 10 elements. The remainder is approximately 0.11. So option b is correct.

To generate a linear array between 5 and 15 with 10 elements using NumPy's linspace function, you can use the following code:

import numpy as np

array = np.linspace(5, 15, 10)

The array generated by this code will be [ 5. 6.11111111 7.22222222 8.33333333 9.44444444 10.55555556 11.66666667 12.77777778 13.88888889 15. ].

To find the remainder when you divide the second element by 2, you can use the modulo operator % in Python:

remainder = array[1] % 2

Calculating the above expression, you will find that the remainder is approximately 0.11.

Therefore,option b is correct.

To learn more about  linear array visit: https://brainly.com/question/24275089

#SPJ11

Answer:b

Explanation:

I took quiz

Answer:

uuuuuuuuuuhhm

Explanation:

CODE!

Answer:

Scribbr

Explanation:

False. Any device in an Industrial Control System (ICS) that is motorized and can control the physical system is not called a fieldbus.

A fieldbus refers to a digital communication network used in industrial automation systems to connect various devices and components within the system. It is a means of communication that allows for the exchange of data between different devices such as sensors, actuators, controllers, and other devices in an ICS. Devices in an ICS that are motorized and can control the physical system are typically referred to as actuators. Actuators are devices that convert control signals into physical actions, such as opening or closing valves, moving motors, or adjusting positions.

Fieldbuses, on the other hand, provide the communication infrastructure to facilitate the exchange of data between different devices, including sensors, controllers, and actuators, within an ICS. They enable the seamless transmission of control signals, data, and information necessary for the operation and coordination of the industrial processes. Therefore, while actuators are motorized devices responsible for controlling physical systems in an ICS, fieldbus refers to the communication network used for data exchange among various devices in the system.

Learn more about fieldbus from here:

https://brainly.com/question/29892458

#SPJ11

The Data Recording and Electronic retention system (DRE) was established by the National Futures Association (NFA) to help guarantee that brokers retain specific data and documents for compliance purposes.

The NFA believes that the electronic storage of the information would enable more efficient record-keeping and reduce the costs of record retention for firms. As a result, the NFA has created a number of standards to ensure that the storage method complies with the relevant legislation.According to NFA rules, a broker may keep electronic records in either native file format or image format.

Additionally, the broker must ensure that the electronic storage medium is not only secure but that it is compatible with the software utilized by the broker's regulatory agency. In the case of the CFTC, the broker must ensure that electronic records can be made available in a timely and searchable manner.

To know more about Data Recording visit:

https://brainly.com/question/31927212

#SPJ11

udev program runs in the background to automatically detect and mount new storage devices.

You or your operating system must make the storage device accessible through the computer's file system before it can be used by your computer (such as a hard drive, CD-ROM, or network share). This action is referred to as mounting. Only files on mounted media are accessible. To mount a drive using the Windows interface in a blank folder

Right-click the partition or volume that contains the folder you wish to mount the disk to in Disk Management.

After selecting Add, click Change Drive Letter and Paths.

In the following blank NTFS folder, click Mount.

Users will have access to files, folders, and devices after mounting. Hard drives, USBs, and other external storage devices are mounted via it.

learn more about udev here:

https://brainly.com/question/29843939

#SPJ4

Based on the company's requirement to switch to any chosen network provider, the network type that best suits their needs is GSM (Global System for Mobile Communications).

GSM is a widely adopted standard for mobile communication and is used by the majority of the world's cellular networks. One of the key advantages of GSM is its use of SIM cards (Subscriber Identity Module). SIM cards allow users to easily switch between different network providers by simply swapping out the SIM card in their device. This flexibility provides the company with the freedom to choose the network provider that offers the best coverage, pricing, and services for their specific needs.

On the other hand, CDMA (Code Division Multiple Access) is another network technology used in cellular communication. Unlike GSM, CDMA does not utilize SIM cards. CDMA phones are typically tied to specific network providers and do not offer the same level of flexibility when it comes to switching between providers. Therefore, CDMA is not the best network type for the company's requirement to have the ability to switch to any chosen provider.

PRL (Preferred Roaming List) is not a network type but rather a list that CDMA phones use to prioritize which networks to connect to when roaming. It is not directly relevant to the company's requirement.

LTE (Long-Term Evolution) is a 4G wireless communication standard that provides high-speed data transmission. While LTE is an advanced network technology, it does not specifically address the company's need for flexibility in switching network providers.

In summary, the network type that best suits the company's needs for switching to any chosen provider is GSM.

For more questions on network

https://brainly.com/question/28342757

#SPJ11

Answer:

x = 18

Explanation:

3x = 2x+18

3x-2x = 18

x=18

Answer:

Explanation:

3X-2X=2X-2X+18

X=18

The option that is the switching system for 3g and global system for mobile (gsm) cellular networks is option A: base transceiver station (BTS)

The GSM/CDMA network system is one that fundamentally made up of Mobile Switching Centers (MSCs). It serves as the system's command center for network switching. By the act of hopping between different network paths, the MSC connects calls between subscribers.

Therefore, in regards to the above, Any mobile network has a fixed radio transceiver known as a base transceiver station (BTS). Mobile devices are networked through the BTS. It tends to communicates with mobile devices by sending and receiving radio signals, then converts those signals into digital signals that are then sent over the network to other terminals or the Internet. Thus is the correct option.

Learn more about base transceiver station from

https://brainly.com/question/14241789

#SPJ1

See options below

base transceiver station (BTS)

base station system (BSS)

Mobile switching center (MSC

quiescent State

A 3-SAT Boolean formula consists of multiple clauses, each containing a disjunction of exactly three literals, and the entire formula is a conjunction of these clauses. For example, consider a 3-SAT formula with four clauses:

A 3-SAT Boolean formula is a logical expression that represents a problem in boolean satisfiability. It is composed of multiple clauses, where each clause contains three literals combined with an "or" operator. The formula as a whole is formed by joining these clauses with an "and" operator. This type of formula is often used in computer science and mathematics to study the complexity of solving boolean satisfiability problems.

Learn more about 3-SAT

brainly.com/question/15088390

#SPJ11

Run-length coding is a lossless data compression method used to reduce the size of data. In this method, a repeated sequence of data is replaced by a single data value and a count of how many times the value is repeated. In the second version of run-length coding, the count is expressed as a four-bit binary number.

Looking at the given message, we can see that there are several repeated sequences of zeros and ones. To compress the data using run-length coding, we need to count the number of times each sequence is repeated and express that count as a four-bit binary number.

Starting with the first sequence of ones, we count that it is repeated 5 times. To express this count as a four-bit binary number, we need to find the binary equivalent of 5, which is 0101. Therefore, we replace the sequence of ones with the value 1 and the count 0101.

Moving on to the next sequence of zeros, we count that it is repeated 3 times. The binary equivalent of 3 is 0011, so we replace the sequence of zeros with the value 0 and the count 0011.

Continuing in this manner, we compress the entire message using run-length coding with the count expressed as a four-bit binary number. The compressed data is:

1 0101 0 0011 1 0001 0 0001 1

This represents a significant reduction in the size of the data from the original message.

Learn more about binary here:

https://brainly.com/question/3028735

#SPJ11

The correct answer is False. While it is difficult to determine an exact percentage of collisions caused by driver error, most studies suggest that the majority of collisions are caused by driver error.

For example, a report by the National Highway Traffic Safety Administration (NHTSA) in the United States found that 94% of crashes are caused by human error. This includes things like distracted driving, speeding, driving under the influence, and other forms of driver negligence. Other factors, such as vehicle malfunctions or environmental conditions, can also contribute to collisions, but they are typically less common than driver error. Therefore, it would be inaccurate to say that only 1% of all collisions are caused by driver error.

To learn more about driver click the link below:

brainly.com/question/30629349

#SPJ11

The goal of destroying CUI is typically to make it unrecoverable, meaning that the information is permanently deleted or destroyed in a way that it cannot be reconstructed or retrieved.

What is CUI?

CUI stands for Controlled Unclassified Information, which refers to unclassified information that is sensitive and requires protection.

The goal of destroying CUI is typically to make it unrecoverable, meaning that the information is permanently deleted, destroyed in a way that it cannot be reconstructed or retrieved once deleted or destroyed.

This is usually done to prevent unauthorized access or disclosure of sensitive information. Therefore, the correct answer is C) Make it unrecoverable.

Controlled Unclassified Information (CUI) is unclassified information that requires safeguarding or dissemination controls and is governed by specific laws, regulations, and policies to protect it from unauthorized access or disclosure.

To know more about CUI, visit: https://brainly.com/question/29626718

#SPJ4

Answer:

people who stan blackpink are known as blinks.

another meaning is blinking your eyes.

Answer:

In a broadcast network such as radio network for example a walkie talkie, the broadcasted transmission is received equally by all receivers indiscriminately which may lead to dissemination of classified information to an unauthorized receiver, therefore, the network layer is required is needed to ensure proper routing of the information

Similarly, when the all the broadcasters in one location are each trying to send messages to different receivers at another given location, there would be potential for network congestion and it would be difficult to send information through the network

When there is need for priority service the presence of a network layer is needed in the network

However, when the above functions performed by the network layer is not required, then, the network layer can be excluded, such as the communication between layers 4 - 7 of the OSI model

Explanation:

Answer:

With Guava, you can use either

int[] all = Ints.concat(originalArray);

or

int[] all = Ints.concat(a, b, c);

Explanation:

Use GUAVA

In the Python program window, black is used for code and syntax, while white is used as the background.

1. Black  -  The color black is typically used for the program's code and syntax. It represents the actual Python code and includes keywords, functions, variables, and other programming constructs.

2. White  -  The color white is commonly used as the background color in the program window. It provides a clean and neutral backdrop for the code and makes it easier to read and understand.

Learn more about python program at:

https://brainly.com/question/26497128

#SPJ1

Answer:

C) h

Explanation:

In HTML, headings are created using the "h" tags. The h tags range from h1 to h6, with h1 being the highest level heading and h6 being the lowest level heading.

For example, to create a heading level 1 you would use the <h1> tag like this:

<h1>This is a Heading Level 1</h1>

The other tags A) body, B) p and D) li are used for different purposes in HTML. The <body> tag defines the document's body, <p> for a paragraph and <li> for a list item.

If an event occurs, the agent logs details regarding the event. what is this event called GET.

Agent Log File Information is known to be the start  of the log file that is said to depict the startup of the agent that is known to be handling the services as well as the configuration settings.

Note that  the agent log also has in it, the series of agent runtime activity as well as the exceptions that are done and it is used for troubleshoot deployment problem.

Therefore, If an event occurs, the agent logs details regarding the event. what is this event called GET.

Learn more about agent from

https://brainly.com/question/7284696

#SPJ1

Answer:

sytaragadr

Explanation:

To find the offset address of the element in row and column of a matrix with rows and columns using the given matrix representation, we need to concatenate the binary representations of the row and column indices to form a single binary string, and then convert that binary string to its decimal equivalent, which represents the offset address.

The bit fields for row and column number should be big enough to accommodate the highest possible row and column numbers. In this case, the row and column field widths are bits each, which means that the highest possible row and column numbers are and , respectively.

Let's consider the element in row and column . We can represent the row and column indices as binary strings of bits each, where the most significant bit is on the left and the least significant bit is on the right. For example, the binary representation of row 1 is "00000001" and the binary representation of column 2 is "00000010".

To concatenate these binary strings, we simply append the binary representation of the column index to the binary representation of the row index. In this case, the concatenated binary string is "0000000100000010".

To convert this binary string to its decimal equivalent, we simply interpret it as a binary number and compute its value:

offset_address = 2^0 * 0 + 2^1 * 1 + 2^2 * 0 + 2^3 * 0 + 2^4 * 0 + 2^5 * 0 + 2^6 * 0 + 2^7 * 0 + 2^8 * 1 + 2^9 * 0 + 2^10 * 0 + 2^11 * 0 + 2^12 * 0 + 2^13 * 0 + 2^14 * 1 + 2^15 * 0

= 2 + 256 + 16384

= 16642

Therefore, the offset address of the element in row and column of the matrix is 16642.

For more questions like matrices visit the link below:

https://brainly.com/question/14805442

#SPJ11

The way that the tribes profit most from cattle drives that passed through their land is option D. By leasing grazing land to ranchers and drovers from Texas.

When Oklahoma became a state in 1907, the reservation system there was essentially abolished. In Indian Territory, cattle were and are the dominant economic driver.

Tolls on moving livestock, exporting their own animals, and leasing their territory for grazing were all sources of income for the tribes.

There were several cattle drives between 1867 and 1893. Cattle drives were conducted to supply the demand for beef in the east and to provide the cattlemen with a means of livelihood after the Civil War when the great cities in the northeast lacked livestock.

Lastly, Abolishing Cattle Drives: Soon after the Civil War, it began, and after the railroads reached Texas, it came to an end.

Learn more about cattle drives from

https://brainly.com/question/16118067
#SPJ1