Your company has been asked to design an air-traffic control
safety system by the FAA. The system must identify the closest two
aircraft out of all the aircraft within radar range. For a set P
c
Answers
Air traffic control is an important aspect of aviation that ensures the safety of the passengers, crew, and cargo. The Federal Aviation Administration (FAA) has asked our company to design an air traffic control safety system that can identify the closest two aircraft within radar range.
The system should be able to handle a set P of aircraft and efficiently identify the two closest aircraft from the set. The task requires knowledge of various aspects of air traffic control, including communication, navigation, and surveillance. Therefore, the design team should consist of experts in these fields.
Additionally, the team should develop algorithms that can detect the location of the aircraft, the altitude, and the speed. These data points should then be analyzed to identify the closest two aircraft based on their distance and bearing from each other. The team should also consider other factors such as weather conditions and altitude restrictions while designing the system.
Finally, the system should be tested thoroughly to ensure its reliability and accuracy. The system should be able to handle high traffic density and provide timely information to air traffic controllers. This will help reduce the risk of mid-air collisions and ensure that air travel remains safe and efficient.
To know more about important visit :
https://brainly.com/question/24051924
#SPJ11
Related Questions
application's of kirchoff's law
Answers
1. Convenience receptacles that are installed in bedrooms in a house are required to be protected by
a(n)
a. arc-fault circuit interrupter
e. ground-fault circuit interrupter
b. surge suppressor
surface-mounted incandescent luminai (light fir
Answers
Convenience receptacles that are installed in bedrooms in a house are required to be protected by a arc-fault circuit interrupter. (Option A)
What is the explanation for the above response?
Arc-fault circuit interrupters (AFCIs) are designed to detect dangerous electrical arcs in wiring and shut off power before they can cause a fire. AFCIs are required by the National Electrical Code (NEC) to be installed in certain areas of the home, including bedrooms, to provide increased electrical safety.
Ground-fault circuit interrupters (GFCIs) are also required in areas where water and electricity may come into contact, such as bathrooms, kitchens, and outdoor outlets, to protect against electric shock. Surge suppressors and surface-mounted incandescent luminaires are not required for bedroom receptacles.
Learn more about Convenience receptacles at:
https://brainly.com/question/30209260
#SPJ1
A company wants to develop audio speakers using an inexpensive type of plastic that has a very high quality of sound output. Which customers would most likely give a high evaluation of this product?
Answers
Answer:A
Explanation:
Those who want to save money and will use the product for only a few years
Answer:
THE ANSWER is A - those who want to save money and will use the product for only a few years
Explanation: Got it right on edg 2021
Question # 1
Fill in the Blank
Complete the following sentence.
Mobility refers to the ability to _____.
Answers
to move or walk freely and easly
a u-shaped clevis holds a pin that connects to a single flat bar (like the connection at pin a of the two-link truss). what describes the loading configuration of the pin?
Answers
To prevent wear and lower the likelihood that either the pin or the clevis may fail, clevis pins should be tightly fitted to the holes in the clevis.
Threaded and unthreaded clevis pins are the two primary varieties. Unthreaded clevis pins feature a domed head on one end and a cross-hole on the other. A split pin or cotter pin secures the clevis pin in place (used in the USA). A formed head and a partially threaded shank are characteristics of threaded clevis pins. When putting the pin into the shackle, the formed head's cross-holed flat tab and lip act as a stop. Because of the flattened tab and the cross-hole, the pin may be moused easily during installation.
Although a bolt can serve as a clevis pin, it is not designed to withstand the lateral force that a clevis pin must withstand. While clevis pins and bolts are made to endure shearing forces, normal bolts are made to bear tension stresses.
To know more about pins:
https://brainly.com/question/21284958
#SPJ4
How to write an essay of informative speaking
Answers
Answer:
Do not use I me my we. Less exclamation points, bigger words like "Pompous" Lots of uptight language, as if you are at an interview. structure should be precise and sharp, sharper than Angelina Jolie's cheekbones
Explanation:
describe the characteristic common to all of the material removal mechanisms in nontraditional machining processes.
Answers
The common characteristic of all material removal mechanisms in non-traditional machining processes is that they use a tool or electrode to remove material from the workpiece.
This can include processes such as laser cutting, electrochemical machining, electrical discharge machining, and waterjet cutting. These processes are often used when conventional machining methods are inadequate or inefficient, and they are able to achieve high levels of precision and accuracy.
The primary mechanism of material removal in Electron Beam Machining (EBM) is through thermal sputtering. This is a process in which incident electrons, accelerated by a high voltage, strike a surface and cause atoms or molecules to be ejected from the surface.
Learn more about Electron Beam Machining (EBM)
https://brainly.com/question/13391320
#SPJ4
How does the use of databases improve or enhance an organization's data collection process?
Do you think an organization could function without the use of databases?
Provide details and examples to support your answer
Answers
By offering a centralized repository for collecting and managing data, databases can considerably improve an organization's data collection process.
It will be very difficult for organizations to function without the use of data base.
What is the use of Database?Databases are used to store, organize, and access data of any type. They collect information about people, places, or things. That information is gathered in one place so that it may be studied and analyzed. Databases are simply organized collections of data.
Databases allow us to work efficiently with massive amounts of data. They make data updating straightforward and reliable, and they help with accuracy.
Learn more about database here: https://brainly.com/question/26096799
#SPJ1
Two wooden members of uniform rectangular cross section are joined using a simple glued scarf splice. The maximum allowable shearing stress and maximum allowable normal stress in the glued splice is 50 MPa and 100 MPa, respectively. The cross-section area of the glued member is 400 mm2. (a) What should the value of the angle be to achieve maximum load Fmax? (b) What is the magnitude of the maximum load Fmax?
Answers
Answer:
a). α = 26.57
b). Maximum load is 50 .kN
Explanation:
a).
The normal force is given by
N = σ A cosec β
where, σ is the normal stress
A is the cross sectional area
Similarly, shear force is given by
S= τ A cosec β
where, τ is the shearing stress
Now from the figure,
tan β = S/N
= τ/σ
Therefore, \($\beta = \tan^{-1}(2)$\) = 63.43
α = 90 - β = 26.57
b).
The normal force is given by
\($N=(100\times 10^6)(400\times 10^{-6}) \text{ cosec}\ 63.43$\)
\($N=44.78\times 10^3$\) N
We have
\($\Sigma F_y=0$\)
∴ N - F sin β = 0
⇒ F = N / sin β
= \($\frac{44.72\times 10^3}{\sin(63.43)} = 50\times 10^3 N$\)
Similarly,
The shear force is given by
S = τ A cosec β
= \($(50\times 10^6)(400\times 10^{-6}) \text{ cosec}\ 63.43 = 22.36\times 10^3 N$\)
\($\Sigma F_x=0$\)
∴ S - F cos β = 0
⇒ F = S / cos β
\($\frac{22.36\times 10^3}{\cos(63.43)} = 49.99\times 10^3 N$\)
Therefore, force is 50 kN.
When a process is in a state of statistical control, all of the points on a control chart should fall within the control limits. However, it is undesirable that all of the points should fall extremely near, or exactly on, the centerline of the control chart. Why?
Answers
it is undesirable that all of the points should fall extremely near, or exactly on, the centerline of the control chart Because:
It can make it difficult to interpret patterns and draw conclusions in a run chart.It can lead hinder the process, and make it unstable.When a data point falls outside the control limits of a run chart ?If a data point falls is said to outside the control limits, we can say that the process is said to be out of one's control and it is good that an investigation is done to ascertain and remove the cause or causes.
So, it is undesirable that all of the points should fall extremely near, or exactly on, the centerline of the control chart Because:
It can make it difficult to interpret patterns and draw conclusions in a run chart.It can lead hinder the process, and make it unstable.Learn more about data point from
https://brainly.com/question/3514929
#SPJ1
An Interior designer, Cal, gets a job to help restore the interior of an old hotel that its new owner wants returned as
much as possible to its original state. The hotel, bullt two centuries ago, has gone through a lot of changes and served
many purposes, but now it's going back to its original function, and the owner wants to restore as many of the original
details as possible. In many cases, this involves replacing custom features such as ornate finlals, and in many other
cases new wood must precisely match the type, color, and texture of surviving original wood. What research methods
do you predict Cal will need to use for this project? (Select all that apply.)
Cal will need to do extensive archival research to find as much Information concerning the hotel's original Interior as possible.
Cal will need to find local experts in the specific restorative work required to find sources for replacements of ornamental features.
wood matching, and related tasks.
Cal will have to seek out relatives of the original owners to Interview them for anything they can tell him about the hotel when it was
new.
Cal will need to do all the Internet research he can to find out anything online he can about the hotel's history.
Answers
Cal, the interior designer, will need to use several research methods to restore the interior of the old hotel to its original state.
Firstly, Cal will need to conduct extensive archival research to gather information about the hotel's original interior designer. This will help him understand the original layout, design, and ornamental features of the hotel.
Secondly, Cal will need to find local experts who specialize in the specific restorative work required to source replacements for ornamental features, wood matching, and related tasks. These experts can guide Cal in identifying the right materials, colors, and textures to match the original features of the hotel.
Thirdly, Cal may need to seek out relatives of the original owners to interview them for any information they can provide about the hotel when it was new. This can help him gain insights into the original design, features, and any unique aspects of the hotel.
Finally, Cal will need to do extensive online research to find out anything he can about the hotel's history. This can include searching for old photographs, newspaper articles, and other relevant information about the hotel. By combining all these research methods, Cal can restore the hotel's interior to its original state with the right ornamental features, colors, and textures.
Learn more about interior designer here:
https://brainly.com/question/13538739
#SPJ11
Can someone help me create a Network Diagram or Chart for the following info?
You will start by calculating forward pass for this schedule based on the given information that the early start for activity A is day 1. Once you have completed the forward pass, you will calculate a backward pass based on the given information that the late finish of activity D is day 22. Upon finishing the backwards pass, you will then calculate total float for each activity.
Network Diagram and Chart are attached.student submitted image, transcription available below
Answers
Yes, I can help you create a Network Diagram and Chart based on the given information.
Creating a Network Diagram and Chart involves analyzing the dependencies between different activities in a project schedule to determine the critical path and identify the total float for each activity.
In the first step, the forward pass is calculated to determine the early start and early finish dates for each activity. Starting with activity A having an early start on day 1, the forward pass calculates the earliest possible start and finish dates for each subsequent activity based on their dependencies and durations.
In the second step, the backward pass is calculated to determine the late start and late finish dates for each activity. The late finish date for activity D is given as day 22, and by working backwards from that point, we can determine the latest possible start and finish dates for each preceding activity.
Finally, in the third step, the total float for each activity is calculated. Total float represents the amount of time an activity can be delayed without affecting the project's overall duration. It is calculated by finding the difference between the late start and early start dates (or late finish and early finish dates) for each activity. Activities with zero total float are on the critical path, meaning any delay in their completion will directly impact the project's duration.
By following these steps, we can create a Network Diagram and Chart that visually represents the project schedule, identifies the critical path, and provides information about the total float for each activity.
Learn more about Network
brainly.com/question/29350844
#SPJ11
10.2 LAB: Output numbers in reverse Write a program that reads a list of integers, one per line, until an * is read, then outputs those integers in reverse. For simplicity in coding output, follow each integer, including the last one, by a comma. Note: Use a while loop to output the integers. DO NOT use reverse() or reversed(). Ex: If the input is:
Answers
The application reads integers from the user up till a * is inserted. The num list list is used to store the integers. A while loop is then used to output the integers, separated by commas, in reverse order.
Which interview questions pertaining to coding are asked?The majority of coding interviews involve questions about data structures, algorithms, and logic. The themes of the array, linked list, string, binary tree, and algorithmic issues all come up in coding interviews.
Why is computer coding different from computer programming?Coding, a programming activity, focuses on producing codes that computers can comprehend. Programming requires approving codes in order to create programs. Simple software skills and programming expertise are all that are necessary for coding.
To know more about programing visit:-
brainly.com/question/30506777
#SPJ1
why dose bob not let humans touch him one and only Ivan
Answers
What strategy may help a visual learner process data?
Answers
A strategy that may help a visual learner process data is a pie chart or histogram.
two pieces of copper wire have equal lengths. one has a cross-sectional diameter twice the other. which of the following do you expect to be true? group of answer choices the larger wire has 1/2 the resistance the larger wire has twice the resistance the larger wire has 1/4 the resistance the wires have equal resistance the larger wire has 4 times the resistance
Answers
Answer:
Larger wire has 1/2 resistance
Explanation:
Explanation can be found in attached image.
Find and write the mathematical problem formulation of shortest path problem
Answers
Shortest path (A, C, E, D, F) between vertices A and F in the weighted directed graph
The problem of finding the shortest path between two intersections on a road map may be modeled as a special case of the shortest path problem in graphs, where the vertices correspond to intersections and the edges correspond to road segments, each weighted by the length of the segment.
what is a computer device
Answers
HELP! Need the correct answer ASAP! Thanks
Answers
Answer:
i think it might be answer b
Explanation:
Answer:
I also think that it might be b
because these jobs are in there
aerospace engineering and operations technologist and teshniciansagricultural techniciansair traffic controllersair craft mechanics and service technicianswhat is a lintel? question 7 options: upright beam beam used to span an opening a form of volcanic stone a type of marble
Answers
Answer: A lintel is a type of beam that spans openings such as portals, doors, windows and fireplaces. It can be a decorative architectural element, or a combined ornamented structural item
if the average speed of a car is 45 km/jr, how far can it travel in 40 minutes?
Answers
Answer:
30km
Explanation:
speed = distance ÷ time
What is probability of stockout suppose now that the amount of lng (also measured in 1000s in gallons) available on hand at the beginning of the day is a random variable, y , with pdf
Answers
Answer:
The probability of a stockout is the probability that the demand for LNG will exceed the amount of LNG that is available on hand. In this case, the demand for LNG is 2000 kL and the amount of LNG that is available on hand is a random variable, Y, with pdf
f
Y
(y)=
10
1
e
−y/10
for y≥0.
The probability of a stockout is given by the following equation:
P(stockout)=∫
0
2000
f
Y
(y)dy
=∫
0
2000
10
1
e
−y/10
dy
=1−e
−20
=0.1353
Therefore, the probability of a stockout is 13.53%.
Explanation:
Which is the most common source of abnormal noises in an air
conditioner?
Select one:
A. Evaporator
B. Condenser
C. Compressor
D. Expansion valve
Answers
Answer is: letter B.Condenser
Explanation:
common issue associated with an air conditioner screeching noise is a malfunctioning fan motor in the outdoor condenser unit. The central air conditioning system connected to your home features a fan that is designed to remove heat from the refrigerant.
what is the irregular past tense of hear?
Answers
Answer:
Past tense of hear = heard
What time ----–- the train arrve?
Answers
Christopher needs to order some new supplies for the restaurant where he works. The restaurant needs at least 775 spoons. There are currently 355 spoons. If each set on sale contains 10 spoons, write and solve an inequality which can be used to determine s, the number of sets of spoons Christopher could buy for the restaurant to have enough spoons.
Answers
The inequality which can be used to determine s, the number of sets of spoons Christopher could buy for the restaurant to have enough spoons is
35 + 10s ≥ 75
What is an inequality?An inequality is simply used to show the relationship between the expressions that aren't equal.
The restaurant needs at least 75 spoons and there are currently 35 spoons and each set on sale contains 10 spoon.
Let each set be represented as s. This will be illustrated as:
35 + (10 × s) ≥ 75
35 + 10s ≥ 75
Collect like terms
10s ≥ 75 - 30
10s ≥ 45
Divide
s ≥ 45/10
s ≥ 4.5
The restaurant must have at least 5 sets.
Learn more about inequalities on:
brainly.com/question/11613554
#SPJ1
The inequality that can be used to determine s, the number of sets of spoons Christopher could buy for the restaurant, is 35 + 10s ≥ 75.
What is inequality?Inequality is a term used to show two relations between two values that are not equal to each other.
Given, the restaurant needs at least 775 spoons. They have 355 spoons and each set contains 10 spoons.
Then the expression is ;
35 + (10 × s) ≥ 75
35 + 10s ≥ 75
Like terms are extracted
10s ≥ 75 - 30
10s ≥ 45
s ≥ 45/10
s ≥ 4.5
Thus, the inequality in the number of sets of spoons is 35 + 10s ≥ 75.
To learn more about inequality, refer to the below link:
https://brainly.com/question/28923367
#SPJ1
: A cyclical load of 1500 lb is to be exerted at the end of a 10 in. long aluminium beam (see Figure below). The bar must survive for at least 10° cycles. What is the minimum diameter of the bar?
Answers
Answer:
the minimum diameter of the bar is 1.634 in
What is computer programming
Answers
Answer:
Computer programming is where you learn and see how computers work. People do this for a living as a job, if you get really good at it you will soon be able to program/ create a computer.
Explanation:
Hope dis helps! :)
What is the base unit that is divided in an engineering scale?
An engineering scale is based on unit increments of a/n ____.
Answers
Explanation:
The most often used architect's scale is 1/4" = 1'-0". The basic unit of measure for metric scales is the millimeter (mm). Drafting scales are either open-divided or full-divided.
I really have no clue if this is right or not because, well, I'm not an expert.
If this is wrong, don't hesitate to report my answer if it's wrong.
The current in the wires of a circuit is 90 milliAmps. If the resistance of the circuit were doubled (with no change in voltage), then its new current would be _____ milliAmps.
Answers
Answer:
\(I = 45mA\)
Explanation:
Given
\(I = 90mA\) --- Current
Required
Determine the new current when resistance is doubled
Using \(V = IR\)
Initially, we have:
\(V = 90mA * R\)
When resistance is doubled and voltage remains unaltered, we have:
\(V = I* 2R\)
2R represents the new resistance and I represents the new current
Equate both values of V
\(90mA * R = I* 2R\)
Make I the subject
\(I = \frac{90mA * R}{2R}\)
\(I = \frac{90mA }{2}\)
\(I = 45mA\)
The new current is 45milliAmps