If you are managing the inventory of work in process, the source of control you should use is the: shop floor control systems.
The reason for this is that these systems help you to regulate and monitor the production of goods within the plant.The shop floor control systems monitor the flow of work in process on the plant floor. The systems keep track of the progress of each order as it moves through the various stages of production. The systems help you to identify problems and bottlenecks in the production process so that you can take corrective action to improve the efficiency of the plant.
These systems also provide you with real-time data on the production process. You can use this data to make informed decisions about how to allocate resources and manage inventory to ensure that you have the right amount of work in process to meet customer demand. In short, shop floor control systems are critical to managing the inventory of work in process. They enable you to track production progress, identify bottlenecks, and optimize production to improve efficiency and customer satisfaction.
Learn more about shop floor control systems: https://brainly.com/question/29602656
#SPJ11
Inventory Control involves monitoring and management of inventory levels to ensure that there are sufficient materials to meet the demand while avoiding overstocking.
Effective inventory management helps to keep production running smoothly, minimize costs, and optimize supply chain operations.Managing inventory of work in process requires an appropriate inventory control system. The shop floor control system should be used as the source of control to monitor inventory of work in process. The shop floor control system is an essential component of any manufacturing organization that provides accurate and timely feedback on the performance of the manufacturing process.In manufacturing, work in process (WIP) inventory refers to unfinished goods that are still in production. WIP inventory includes raw materials, parts that are in the process of being transformed into finished products, and finished products that are not yet ready for shipment. The shop floor control system is used to monitor the production process, ensure that the work is completed on time, and track the WIP inventory levels.The shop floor control system offers a real-time view of production activities, which helps managers make informed decisions on inventory replenishment, production scheduling, and resource allocation. This system also provides detailed information on the manufacturing process, such as the time taken to complete each stage of production, which can be used to identify bottlenecks and improve process efficiency. Therefore, managing inventory of work in process requires the use of the shop floor control system as a source of control.
To know more about overstocking visit:
https://brainly.com/question/30640051
#SPJ11
13.when circuit breakers are classified as 100a through 2,000a frames, these numbers are normally referred to as the .
These figures are typically referred as the frame size when circuit breakers are categorised as 100a through 2,000a frames.
What is frames?
A frame is a digital data transfer unit used in telecommunication and computer networking. A frame is merely a straightforward container for a single network packet in packet switching systems. A frame is a repeating structure that supports time-division multiplexing in other telecommunications systems. The beginning or end of the payload data inside the stream of symbols and bits that the receiver receives are often indicated by a series of bits or symbols called frame synchronisation characteristics. When a frame is transmitted, a receiver connected to the system ignores the information until it notices a fresh frame synchronisation sequence.
To learn more about frames
https://brainly.com/question/13441224
#SPJ4
The next day at SLS found everyone in technical support busy restoring computer systems to their former state and installing new virus and worm control software. Amy found herself learning how to install desktop computer operating systems and applications as SLS made a heroic effort to recover from the attack of the previous day.
Required:
Do you think this event was caused by an insider or outsider?
Answer:
Yes, it was caused by an insider or outsider.
Explanation:
Yes, I believe that this event was caused by an insider or outsider. This is because, if a USB removable flash drive is attached to all the office computers by an insider and now an outsider sends a mail to the company’s General group mail; if the mail has a link that contains some infected worms and virus; once anybody clicks on the link in the mail then, all the computers will be affected by the virus.
Therefore, this event may be caused by the insider who clicked the infected link or by the outsider sent the infected link in the mail.
A line drawn from the leading edge to the trailing edge of an airfoil and equidistant at all points from the upper and lower contours is called the
A line drawn from the leading edge to the trailing edge of an airfoil and equidistant at all points from the upper and lower contours is called the mean camber line.
The mean camber line is a very important concept in aerodynamics as it defines the overall shape of an airfoil and plays a key role in determining its aerodynamic characteristics, such as lift and drag. It is used to calculate the maximum thickness, maximum camber, and location of the maximum camber of an airfoil.
The mean camber line is typically used as a reference line when designing airfoils, and different shapes can be created by modifying it with specific curves and angles.
Learn more about airfoil here:
https://brainly.com/question/31565970
#SPJ11
what could happen if the engine was uncowled during the starting and operating procedures
If an engine fails during rollout or just before takeoff, immediately shut both throttles and land the aircraft safely. Before reaching a safe single engine speed right away after takeoff, drop your nose to increase velocity.
What is the engine starting procedure?Closing the throttle, turning off the fuel pump, setting the mixture control to idle cutoff, and simply cranking the engine is the most reliable hot start method I've found.
What is the procedure for engine failure?If an engine fails during rollout or just before takeoff, immediately shut both throttles and land the aircraft safely. Before reaching a safe single engine speed right away after takeoff, drop your nose to increase velocity. If you are unable to climb, close both throttles and land straight ahead.
What happens if engine fails during take off?The typical practice for the majority of aircraft would be to abandon takeoff if an engine failed during takeoff. In small aircraft, the pilot should turn the throttles down to idle, activate the speed brakes (if provided), and apply the brakes as needed if the engine fails before VR (Rotation Speed).
To learn more about engine procedure refer to:
https://brainly.com/question/18428188
#SPJ1
A train starts from rest and accelerates uniformly until it has traveled 2.1 km and acquired a forward velocity of The train then moves at a constant velocity of for 400 s. The train then slows down uniformly at until it is brought to a halt. The distance traveled by the train while slowing down is closest to A train starts from rest and accelerates uniformly until it has traveled 2.1 km and acquired a forward velocity of The train then moves at a constant velocity of for 400 s. The train then slows down uniformly at until it is brought to a halt. The distance traveled by the train while slowing down is closest to 3.8 km. 4.2 km. 3.6 km. 4.4 km. 4.0 km.
Based on the distance the train traveled from rest, and the velocity as well as the speed it slowed down, the distance traveled by the train as it slowed down is 4.4 km.
How far did the train go as it slowed down?This can be by the formula:
= Constant velocity ² / (2 x Speed while slowing down)
Solving gives:
= 24² / (2 x -0.065)
= 576 / (0.13)
= 4,431 m
= 4.4 km
Find out more on distance while slowing down at https://brainly.com/question/13445169.
#SPJ1
(a) (6 points) Find the integer a in {0, 1,..., 26} such that a = -15 (mod 27). Explain. (b) (6 points) Which positive integers less than 12 are relatively prime to 12?
a. a = 12 is the solution to the given congruence relation. b. the positive integers less than 12 that are relatively prime to 12 are 1, 5, 7, and 11.
(a) The main answer: The integer a that satisfies a ≡ -15 (mod 27) is 12.
To find the value of a, we need to consider the congruence relation a ≡ -15 (mod 27). This means that a and -15 have the same remainder when divided by 27.
To determine the value of a, we can add multiples of 27 to -15 until we find a number that falls within the range of {0, 1,..., 26}. By adding 27 to -15, we get 12. Therefore, a = 12 is the solution to the given congruence relation.
(b) The main answer: The positive integers less than 12 that are relatively prime to 12 are 1, 5, 7, and 11.
Supporting explanation: Two integers are relatively prime if their greatest common divisor (GCD) is 1. In this case, we are looking for positive integers that have no common factors with 12 other than 1.
To determine which numbers satisfy this condition, we can examine each positive integer less than 12 and calculate its GCD with 12.
For 1, the GCD(1, 12) = 1, which means it is relatively prime to 12.
For 2, the GCD(2, 12) = 2, so it is not relatively prime to 12.
For 3, the GCD(3, 12) = 3, so it is not relatively prime to 12.
For 4, the GCD(4, 12) = 4, so it is not relatively prime to 12.
For 5, the GCD(5, 12) = 1, which means it is relatively prime to 12.
For 6, the GCD(6, 12) = 6, so it is not relatively prime to 12.
For 7, the GCD(7, 12) = 1, which means it is relatively prime to 12.
For 8, the GCD(8, 12) = 4, so it is not relatively prime to 12.
For 9, the GCD(9, 12) = 3, so it is not relatively prime to 12.
For 10, the GCD(10, 12) = 2, so it is not relatively prime to 12.
For 11, the GCD(11, 12) = 1, which means it is relatively prime to 12.
Therefore, the positive integers less than 12 that are relatively prime to 12 are 1, 5, 7, and 11.
Learn more about prime here
https://brainly.com/question/145452
#SPJ11
rosbel or Janette lol baakkaaa
Answer:
t5g5gtttttttttttttttttttttttttttttttttttttttttttt
Explanation:gt555555555555555555555555555555555555555555555555
Answer:
dawbkjbjwwjhjfbfjewfaekfhawkjndwkja
Explanation: dum*as*
this is it dont anwser this is for my other account
Answer:
thanks for the poiunts
Explanation:
why was the Internet originally designed?
Who had launched the highest number of internet satellites as of March 2020?
Answer:
SpaceX
Explanation:
SpaceX successfully launches 60 more Starlink satellites as it continues towards 2020 service debut. SpaceX has launched another big batch of Starlink satellites, the low Earth orbit spacecraft that will provide connectivity for its globe-spanning high-bandwidth broadband internet network.
Identify the first step in preparing a spectrophotometer for use.
A. Make sure all samples and the blank are ready for measurement.
B. Prepare a calibration curve.
C. Measure the absorbance of the blank.
D. Turn on the light source and the spectrophotometer.
Answer:
D. Turn on the light source and the spectrophotometer.
Explanation:
A spectrophotometer is a machine used to measure the presence of any light-absorbing particle in a solution as well as its concentration. To prepare a spectrophotometer for use, the first step is to turn on the spectrophotometer and allow it to warm up for at least 15 minutes. After this is done, the next step will be to ensure that the samples and blank are ready. Next, an appropriate wavelength is set for the solute being determined. Finally, the absorbance is measured of both the blank and samples.
A family in Florida heard about evaporative coolers as a way to cool their home without the expenses of a refrigerated air conditioning system. Their HVACR technician advises against it. Why?
Their HVACR technician advises against it because of the residential energy costs from HVAC units.
hat is the cost energy?
Energy Cost is known to be a term that connote the cost of electricity and this is one that is often related to fuel oil, gasoline, heating oil, natural gas, as well as other kinds or source of energy linked to any operation.
Hence, Since family in Florida heard about evaporative coolers as a way to cool their home without the expenses of a refrigerated air conditioning system. Their HVACR technician advises against it because of the residential energy costs from HVAC units.
Learn more about energy costs from
https://brainly.com/question/9821162
#SPJ1
TRUE/FALSE. Materials and work products submitted by Government, industry, and DoD civilians, contractors, and military members are subject to review by the Defense Office of Prepublication and Security Review (DOPSR) for public and controlled release.
The Defense Office of Prepublication and Security Review (DOPSR) evaluates materials and work products before they are released to the public or under controlled circumstances.
Which of the following individuals must send their work in for prepublication?Any information intended for public exposure that is or could be based on protected information obtained while associated with the Department of Defense must be submitted for prepublication review on a lifetime basis by Department of Defense employees and military service members.
In order to access classified information, which of the following conditions must employees satisfy? Check all that apply.Requirements for Access: Prior to gaining access to classified information, a person must first be found eligible at the relevant level, have a "need-to-know," and have signed the necessary NDA.
To know more about information visit:-
https://brainly.com/question/6717232
#SPJ1
Technician A says that 5W-30 would be better to use than 20W-50 in most vehicles in
cold weather conditions. Technician B says 20W-50 flows better than 5W-30 in cold
weather. Who is correct?
20
Explanation:
Technician A says that primary vibration is created by slight differences in the inertia of the pistons between top dead center and bottom dead center. Technician B says that secondary vibration is a strong low-frequency vibration caused by the movement of the piston traveling up and down the cylinder. Who is correct? O A. Neither Technician A nor B OB. Technician B O C. Both Technicians A and B D. Technician A
Which of the following is one way to manage the time invested in social media marketing?
a. Leverage tools like Hootsuite that are designed to improve efficiencies.
b. Hire an outside agency.
c. Only spend time on one social media site at a time.
d. Install times on employee computers to monitor time spent on social media.
e. None of these.
To determine whether the marketing campaign will add value to the business, the marketing agency should apply the Present Net Value formula.
A calculation known as the Present Net Value brings all of an investment's future cash flows to the present. The company must identify the revenue totally attributed to the marketing campaign in order to evaluate the campaign marketing strategy as a prospective investment. By doing this, the company will be able to determine the annual inflows (sales) that must be deducted from the outflows (marketing expenses). Every year's net value is discounted at a certain rate, and if the Present Net Value is more than 0, the marketing plan is anticipated to add value to the company. To determine whether the marketing campaign will add value to the business, the marketing agency should apply the Present Net Value formula.
Learn more about Present Net Value here:
https://brainly.com/question/14242912
#SPJ4
composite vaulting pole, has a diameter of about 50 mm
and the pole is being bent to a radius of curvature, R , of about 0.5 m. Determine the peak stress on
the outer surface of a 50% fibre pole with a Em = 3 GPa and Ef = 90 GPa
To determine the peak stress on the outer surface of a 50% fibre composite vaulting pole that has a diameter of about 50 mm and is being bent to a radius of curvature, R, of about 0.5 m, we can use the following formula:
σ = (M/Z) * y
where,σ = stress
M = bending moment
Z = section modulus
y = distance from the neutral axis
To find M, we can use the following formula:
M = (Em/Ef) * (ρc/ρf) * (π/4) * d^3 * (1/R)where,
Em = modulus of elasticity of matrixEf = modulus of elasticity of fibre
ρc = density of the matrixρf = density of the fibreπ = 3.14d = diameter of the pole
R = radius of curvatureNow, substituting the given values:
M = (3/90) * (0.5/1.5) * (π/4) * (0.05)^3 * (1/0.5)M
= 0.000216 Nm
To find Z, we can use the following formula:
Z = (π/32) * d^4 * (ρf/ρc) * (Ef/Em) * (1 + (3h/d)^2)
where,h = height of the pole
Now, substituting the given values:
Z = (π/32) * (0.05)^4 * (0.5/1.5) * (90/3) * (1 + (3(0.5)/0.05)^2)Z
= 0.0001586 m^3To find y, we can use the following formula:
y = (d/2) * (ρf/ρc)where,ρc = density of the matrix
ρf = density of the fibre
Now, substituting the given values:y = (0.05/2) * (0.5/1.5)y = 0.00833 m
Substituting the values of M, Z, and y in the formula for stress, we get:σ = (M/Z) * yσ = (0.000216/0.0001586) * 0.00833σ = 11.77 MPa
Therefore, the peak stress on the outer surface of a 50% fibre composite vaulting pole with a diameter of about 50 mm and being bent to a radius of curvature, R, of about 0.5 m is 11.77 MPa.
Composite materials are known for their remarkable strength and durability, making them ideal for use in a variety of applications. One of these applications is in the production of vaulting poles used in pole vaulting, a track and field event that involves athletes using a long, flexible pole to clear a bar that is suspended above the ground. The poles used in this event are typically made of a composite material that consists of a matrix material, such as epoxy resin, and a reinforcing material, such as carbon fibre or fibreglass. These materials are chosen for their high strength-to-weight ratio, which allows the poles to be both strong and flexible. The strength of the pole is determined by its modulus of elasticity, which is a measure of its ability to resist deformation under load. The modulus of elasticity of the matrix material, Em, and the reinforcing material, Ef, are key factors in determining the strength of the pole. The density of these materials is also important, as it affects the weight of the pole. The peak stress on the outer surface of a pole is an important factor to consider when designing the pole, as it determines the maximum load that the pole can handle before it fails. In order to determine the peak stress on the outer surface of a 50% fibre composite vaulting pole with a diameter of about 50 mm and being bent to a radius of curvature, R, of about 0.5 m, we can use the formula σ = (M/Z) * y, where M is the bending moment, Z is the section modulus, and y is the distance from the neutral axis. By using the appropriate values for Em, Ef, density, diameter, and radius of curvature, we can calculate the peak stress on the outer surface of the pole.
In conclusion, the peak stress on the outer surface of a 50% fibre composite vaulting pole with a diameter of about 50 mm and being bent to a radius of curvature, R, of about 0.5 m, is 11.77 MPa. The strength of the pole is determined by its modulus of elasticity, which is a measure of its ability to resist deformation under load. The modulus of elasticity of the matrix material, Em, and the reinforcing material, Ef, are key factors in determining the strength of the pole. The density of these materials is also important, as it affects the weight of the pole. The peak stress on the outer surface of a pole is an important factor to consider when designing the pole, as it determines the maximum load that the pole can handle before it fails. Overall, composite vaulting poles are an excellent example of how composite materials can be used to create strong and durable structures that are ideal for a wide range of applications.
Learn more about section modulus here:
brainly.com/question/32572508
#SPJ11
The following mechanical testing data was obtained for a material whose cylindrical test sample dimensions before the test were: gage length - 50.8 mm and diameter - 12.83 mm: Load (N) Gage length (mm) 20 50.80 40 50.90 80 51.00 51.06 120 51.08 130 51.16 140 51.31 160 52.07 160 (maximum) 53.31 156 (fracture) 54.20 100 Provide one reason as to why the true failure strength of the material is likely to be underestimated by your answer in ii) (d). What measurement calculation could be made to correct for the underestimation?
This corrected stress value can then be used to determine the true failure strength of the material.
One reason why the true failure strength of the material is likely to be underestimated is due to the presence of surface flaws or defects that initiate the fracture at a stress level lower than the actual strength of the material. To correct for the underestimation, the stress concentration factor at the point of failure can be calculated using the ratio of the actual stress to the nominal stress. This factor can be determined using the geometry of the test sample, which is assumed to be a standard shape. Once the stress concentration factor is known, the actual stress at the point of failure can be calculated by multiplying the nominal stress by the stress concentration factor. This corrected stress value can then be used to determine the true failure strength of the material.
Learn more about stress value here
https://brainly.com/question/16244526
#SPJ11
Your module should have inputs (of the logic type) named "a", "b", and "c_in", and outputs named "s" and "c_out". Create a multi-bit adder module Create a new file called rc_adder4.sv and in it implement a 3-bit adder module. The module should have the following ports two 3-bit input ports ("a" and "b").
create a new file called rc adder4.sv and add a 3-bit adder module to it. The module needs the aforementioned ports. •. two 3-bit input ports (designated as "a" and "b").
What is the total number of inputs and outputs in a complete adder?A complete adder circuit is the main component of the majority of digital circuits that perform addition or subtraction. It creates a sum and carry-out digit by adding two binary digits and a carry-in digit. This is how it gets its name. It consequently has three inputs and two outputs.
What does a complete adder's carry input mean?Three inputs are added using the "full adder," which produces two outputs. The first two inputs are A and B, and the third input is C-IN. The designated output carry is C-OUT.
To know more about inputs and outputs visit:-
https://brainly.com/question/30656951
#SPJ4
Knowing that the central portion of the link BD has a uniform cross-sectional area of 800 2, determine the magnitude of the load P for which the normal stress in that portion of BD is 50 .
Answer: 50
Explanation:
technician a says that electronic transmissions may control shifts by applying shift solenoid output directly to the bands and clutches. technician b says that electronic transmissions may control shifts by directing the shift solenoid output pressure to the shift valves. which technician is correct?
Technician B says that electronic transmissions may control shifts by directing the shift solenoid output pressure to the shift valves is correct.
Whаt is a shift solenoid?А trаnsmission shift solenoid is аn electromаgnet component of аn аutomаtic or semi-аutomаtic trаnsmission thаt controls the flow of fluid to chаnge geаrs аnd other functions in the trаnsmission. The trаnsmission control unit is collecting informаtion from the engine, vehicle speed sensors, аnd other sensors. The trаnsmission control module uses аll these pаrаmeters to cаlculаte when it’s time to shift to the next geаr.
When it’s time to shift, the trаnsmission control unit sends out power or ground to the required shift solenoid, аnd it cаuses the solenoid to open аnd let the trаnsmission oil flow into the vаlve body, which then shifts to the next geаr.
For more information about solenoids refer to the link:
https://brainly.com/question/9535280
#SPJ4
WILL GIVE BRAINLEY PLZZZZZZZ
how is a electrical resistance similar to the diameter of a pipe of water
Answer:
The resistance of the flow of charges in an electric circuit (electrical resistance) is analogous to the frictional effect between water flow through a pipe and the pipe's surface
Explanation:
In comparison to its similarity to the diameter of the pipe affects the flow of water and acts a a factor affecting resistance so are there factors affecting electrical resistance.
in an electrical circuit:
the total length of the wire is to the length of a pipe of water
the cross-sectional area of the wire is to the diameter of a pipe of water.
Thus, the cross sectional are affects the amount of electrical resistance. Wider wires have wider cross-sectional area and vice versa. Also, water will flow (i.e. current) through a wider pipe (i.e. large diameter) at a faster rate than a narrow pipe (i.e. small diameter). This is due to the lower amount of resistance offered by the wider pipe.
in the same manner, the wider the wire, the lesser the electrical resistance to the flow of elsctric charge and vice versa for thiner wires.
Christopher needs to order some new supplies for the restaurant where he works. The restaurant needs at least 775 spoons. There are currently 355 spoons. If each set on sale contains 10 spoons, write and solve an inequality which can be used to determine s, the number of sets of spoons Christopher could buy for the restaurant to have enough spoons.
The inequality which can be used to determine s, the number of sets of spoons Christopher could buy for the restaurant to have enough spoons is
35 + 10s ≥ 75
What is an inequality?An inequality is simply used to show the relationship between the expressions that aren't equal.
The restaurant needs at least 75 spoons and there are currently 35 spoons and each set on sale contains 10 spoon.
Let each set be represented as s. This will be illustrated as:
35 + (10 × s) ≥ 75
35 + 10s ≥ 75
Collect like terms
10s ≥ 75 - 30
10s ≥ 45
Divide
s ≥ 45/10
s ≥ 4.5
The restaurant must have at least 5 sets.
Learn more about inequalities on:
brainly.com/question/11613554
#SPJ1
The inequality that can be used to determine s, the number of sets of spoons Christopher could buy for the restaurant, is 35 + 10s ≥ 75.
What is inequality?Inequality is a term used to show two relations between two values that are not equal to each other.
Given, the restaurant needs at least 775 spoons. They have 355 spoons and each set contains 10 spoons.
Then the expression is ;
35 + (10 × s) ≥ 75
35 + 10s ≥ 75
Like terms are extracted
10s ≥ 75 - 30
10s ≥ 45
s ≥ 45/10
s ≥ 4.5
Thus, the inequality in the number of sets of spoons is 35 + 10s ≥ 75.
To learn more about inequality, refer to the below link:
https://brainly.com/question/28923367
#SPJ1
Following data refers to the years of service (variable x) put in by seven
specialized workers in a factory and their monthly incomes (variable y). x
variable values with corresponding y variable values can be listed as: 11 years of
service with income 700, 7 years of service with income 500, 9 years of service
with income 300, 5 years of service with income 200, 8 years of service with
income 600, 6 years of service with income 400, 10 years of service with
income 800. Regression equation y on-x is
Select one:
ay=3/4x+1
by=4/3x-1
y=3/4x-1
dy-1-3/4x
Based on the data given, the regression equation y on-x is y = 3/4x + 1.
The regression equation that represents the relationship between the years of service (x) and monthly incomes (y) for the specialized workers in the factory can be determined by analyzing the given data points. By examining the data, we can observe that the monthly income increases as the years of service increase. Calculating the regression equation using the given data, we find that the equation that best fits the relationship is:y = (3/4)x + 100
This equation indicates that for every increase of 1 year in service, the monthly income increases by 3/4 (0.75) units. The constant term of 100 represents the base income level. Therefore, the correct option from the given choices is ay = (3/4)x + 1.For more such questions on Regression:
https://brainly.com/question/14230694
#SPJ8
which of the following statements are true regarding elastic deformation? (3 answers are correct) group of answer choices emptying and filling a reservoir would result in elastic deformation of the crust fold structures are the result of elastic deformation isostatic uplift following deglaciation represents elastic deformation stress and strain are proportional stress and strain are not proportional
The correct statements are 2, 3 and 5. Elastic deformation is a temporary deformation of a material. When a force is applied to a material, it will deform, and the amount of deformation will be proportional to the force applied.
Elastic deformation refers to the reversible deformation of a material when a force is applied and it is released. When the load is removed, the material will return to its original shape. Elastic deformation is characterized by its capability to withstand stress without causing any permanent change in the shape of the material or its molecular structure. The following are the correct statements regarding elastic deformation: Stress and strain are proportional; hence, when stress is applied, the deformation or strain is proportional to the stress. Isostatic uplift following deglaciation represents elastic deformation. This statement is correct. Fold structures are the result of elastic deformation. This statement is correct.
Therefore, If the force is removed, the material will return to its original state. The explanation for elastic deformation is that the stress and strain are proportional, and the deformation will not cause any permanent change in the shape or molecular structure of the material.
To know more about force visit:
brainly.com/question/30507236
#SPJ11
Auto transformer starting may use its _____ advantage to provide more current on the load side of the transformer than on the line side
Autotransformer starting may use it "turns ratio" advantage to provide more current on the load side of the transformer than on the line side.
They have a number of advantages over traditional transformers, including size, weight, and cost savings.
One of the advantages of an autotransformer is its "tapping" advantage, which allows it to provide more current on the load side of the transformer than on the line side. This is because the autotransformer uses a single winding, and the load is connected to a tap that is located closer to the end of the winding than the tap that is connected to the line. By using this tapping advantage, an autotransformer can provide a greater amount of voltage or current to the load without drawing as much power from the line, which can result in energy savings and improved efficiency.
Learn more about transformer: https://brainly.com/question/30612582
#SPJ11
technician a says that loose fan belts are usually destroyed more rapidly than belts that are adjusted too tight. technician b says that too tight adjustment on poly-v fan belts can destroy bearings. who is correct?
The bearings and shaft experience additional loads as a result of this increased tension. Bearings' lifespans might be shortened by excessive stress.
Explain about poly v belt?The inside of the Poly-V Belt, also known as the Ribbed Belt, is lined with longitudinal v-shaped ribs. These ribs give the pulley and the belt a bigger surface area to contact, which increases friction force. Compared to a flat belt or rubber v-belt of the same size, the belt can convey more power as a result.
The Poly-V Belt's design ensures superior protection for all reinforcing cords, resulting in a more even load distribution. The Poly-V Belt also serves as a guide for a belt tensioner or idler pulley. Less space is needed for Poly-V Belt drives, and the Belt can be stretched under higher tension.
To learn more about Poly v belt refer to:
https://brainly.com/question/18368496
#SPJ4
The inverted U-tube is used to measure the pressure difference between two points A and B in an inclined pipeline through which water flows. The differenceof level h=0.4m ; X=0.2; and Y=0.3m. Calculate the pressure difference between point B and A if the top of the manometer is filled with:
i) Air
ii) paraffin of relative density of 0.75
Answer:
i) 0.610 m or 610 mm
ii) 0.4 m or 400 mm
Explanation:
The pressure difference between the pipes is
a) Air
Pa + πha +Ha = Pb + πhb +Hb
Pa - Pb = π(hb-ha) + Hb-Ha
Relative density of air = 1.2754 kg /m3
Pa - Pb = 1.2754 * 0.4 + (0.3-0.2) = 0.610 m or 610 mm
b) paraffin of relative density of 0.75
Pa - Pb = π(hb-ha) + Hb-Ha
Pa - Pb = 0.75 * 0.4 + (0.3-0.2) = 0.4 m or 400 mm
when driving an ambulance, what is the safest path when cornering?
Answer:
the safest path when cornering in an ambulance is to enter high and exit low
Explanation:
If an athlete can row at a rate of 50 m/min, how many days would it take to cross the Atlantic (≈3000 mi)?
The kinematics we can find the time to cross the Atlantic is 67 days.
The kinematics studies the movement of the body making relationships between the position, the speed and the acceleration of the same.
The average velocity is defined as the relation between the displacement between the time of the interval
v = \(\frac{\Delta x}{t}\)
Δt = \(\frac{\Delta x}{v}\)
Where v is the velocity, x the displacement t time
In this case they indicate the displacement is Δx = 3000 mi and the speed is v = 50 m / min
The system of units allow data to be exchanged with precision and safety, for this there is currently the international system of measurements (SI), where the unit of length is the meter and the unit of time is the second, let's reduce the magnitudes given to these units.
Δx = 3000 mi ( ) = 4.828 10⁶ m
v = 50 m / min ( ) = 0.833 m / s
Now we can calculate the time to cross the Atlantic
Δt = 4.828 10⁶ / 0.833
Δt = 5.796 10⁶ s
Let's reduce to days
Δt = 5.796 10⁶ s ( ) ( )
Δt = 67 days
In conclusion using kinematics we can find the result of the time to cross the Atlantic is 67 days.
Learn more about kinematics here: brainly.com/question/24984555
principles of passive elements, passive circuits operation (rc, lc, rlc) their time domain and frequency response
Yes, the above statement is True.
What are rc,ls, rlc?Passive elements are electrical or electronic components that do not require an external source of power to function.
Examples of passive elements include resistors, capacitors, and inductors. Passive circuits are circuits that are composed solely of passive elements.
The time domain behavior of a passive circuit is determined by the values and arrangement of the passive elements in the circuit, as well as the input signals applied to the circuit. The frequency response of a passive circuit is the relationship between the input and output signals of the circuit as a function of frequency.
In general, the time domain and frequency response of a passive circuit can be analyzed using circuit analysis techniques, such as Kirchhoff's laws, Ohm's law, and the laws of capacitance and inductance. These principles allow us to predict the behavior of a passive circuit in response to various input signals.
To Know More About Passive circuits operation, Check Out
https://brainly.com/question/13542102
#SPJ1