WILL MARK BRAINLIEST!
List the controlled, independent and dependent variables in banana wine making

When you compare the results of the grease spot test for potato chips, white candle wax, vegetable oil and rubbing alcohol, you will find that all of these substances can be used to remove grease stains from clothes. However, there are some differences in their effectiveness and ease of use.

Potato chips are often used as a quick fix for small grease stains on clothing. You simply place a chip on the stain and press down firmly. The grease from the chip absorbs the grease from the stain, leaving the fabric clean. However, this method is not always effective and may leave a residue on the fabric.

White candle wax can be used to remove grease stains from clothes by melting the wax onto the stain and then peeling it off once it has hardened. This method is effective, but can be time-consuming and messy.

Vegetable oil can be applied to grease stains and left to sit for a few minutes before washing. It is effective at removing the stain, but can be difficult to remove from the fabric.

Rubbing alcohol is a common household cleaner that can be used to remove grease stains. It can be applied directly to the stain and rubbed with a clean cloth. It is effective and easy to use. However, it should be used with caution on delicate fabrics as it can cause damage.

To know more about potato chips visit:

https://brainly.com/question/32780350

#SPJ11

The correct option is (b). VSEPR (Valence Shell Electron Pair Repulsion) theory predicts that simple carbon compounds will form bonds that are (b.) as far apart as possible.

This is because VSEPR theory states that electron pairs around a central atom repel each other and will try to be as far away from one another as possible, resulting in specific molecular geometries for the bonds.

In the case of simple carbon compounds, such as methane (CH4) as an example, VSEPR theory predicts that the carbon atom will form bonds that are as far apart as possible. Let's explore this concept in more detail:

1. Carbon's valence electron configuration: Carbon (C) is in Group 14 of the periodic table, which means it has four valence electrons. These valence electrons are involved in forming chemical bonds.

2. Formation of methane (CH4): Methane is a simple carbon compound composed of one carbon atom bonded to four hydrogen atoms. In methane, carbon shares one electron with each hydrogen atom to form four singled bonds .

3. Electron pair repulsion: According to VSEPR theory, electron pairs, whether they are bonding pairs or lone pairs, repel each other. The repulsion between these electron pairs determines the shape of the molecule.

4. Tetrahedral geometry: In methane, the four bonding pairs of electrons around the central carbon atom repel each other equally. The most stable arrangement that minimizes electron pair repulsion is a tetrahedral geometry. In a tetrahedron, the bond angles between the four atoms are approximately 109.5 degrees.

5. Farthest bond arrangement: In the tetrahedral geometry, the four hydrogen atoms are arranged symmetrically around the carbon atom, maximizing the distance between each hydrogen atom. This arrangement ensures that the electron pairs and atoms are as far apart as possible, minimizing repulsion and maximizing stability.

Therefore, in simple carbon compounds like methane, VSEPR theory predicts that the carbon atom will form bonds that are as far apart as possible, resulting in a tetrahedral geometry. This arrangement allows for the optimal distribution of electron pairs, minimizing repulsion and maintaining the stability of the molecule.

Learn more about VSEPR theory at:  https://brainly.com/question/14225705

#SPJ11

Excess lithium hydroxide is added to solution and this will lead to crystallization of lithium sulfate which is separated from the solution using filtration techniques.

The reaction that occurred between the sulfuric acid and lithium hydroxide is known as a neutralisation reaction.

The products of this reaction is a salt called lithium sulfate and water.

Upon the addition of excess base (lithium hydroxide) the solution becomes super saturated leading to crystallization of salt from the solution.

The mixture is then filtered using a filtration funnel through gravity filtration process.

The hydrated lithium sulfate is then collected as the residue and dried.

Therefore, excess lithium hydroxide is added to solution and this will lead to crystallization of lithium sulfate which is separated from the solution using filtration techniques.

Learn more about filtration here:

https://brainly.com/question/23945157

Answer:

A cell

Explanation:

Answer:

0.9m/s

hope it helps....

The heating process is often used in experiments to evaporate liquid and concentrate the sample. If the heating was stopped before all of the liquid could evaporate, this would have a significant impact on the results of the experiment.

Firstly, the concentration of the sample would be lower than expected. This could affect the accuracy and precision of any measurements or analyses performed on the sample.

For example, if the sample was being analyzed for the presence of a certain compound, the lower concentration may make it more difficult to detect or quantify the compound accurately.

Additionally, the incomplete evaporation of the liquid could lead to contamination of the sample. If the liquid is not fully evaporated, there may be impurities or other compounds present in the final sample that were not accounted for in the experimental design. This could affect the validity of the results and the interpretation of the data.

In summary, the premature stopping of heating in an experiment could lead to lower sample concentration and potential contamination, both of which could have significant implications for the results and conclusions drawn from the experiment.

To know more about heating process, visit:

https://brainly.com/question/10219607#

#SPJ11

The predicted blood pressure when an amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg would be 127.977 mm Hg.

The regression line is a straight line that is used to explain how a dependent variable (y) changes in response to the change in an independent variable (x) with the help of the slope and y-intercept. In other words, a regression line is an equation for a line of best fit for the given set of data.

The regression line equation is as follows: Y^ = a + bx Here, "a" represents the y-intercept, and "b" represents the slope of the regression line. We have given the equation of the regression line as follows: Y^ = 140 + (-0.0667)X. Now, we have been asked to find the predicted blood pressure when an amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg.

To find out the predicted blood pressure, we have to substitute the value of "X" in the regression line equation. Y^ = 140 + (-0.0667)X Y^ = 140 + (-0.0667)186 = 127.977.

Therefore, the predicted blood pressure when an amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg would be 127.977 mm Hg.

To know more about blood pressure click on below link:

https://brainly.com/question/4215574#

#SPJ11

complete question :

A medical researcher wants to determine how a new medication affects blood pressure.The equation of the regression line is  Y^=140+(-0.0667)X

An amount of medication of 186mg is found to result in a blood pressure of 125.35 mm Hg. What is the predicted blood pressure_____mm Hg.

The pressure of this sample at 27° c and at the same volume is  calculated to be 0.6 atm.

Law of Gay-Lussac states that pressure of a given mass of gas varies directly with Kelvin temperature when the volume is constant.

Given that the volumes of the two states are equal. At constant volume, we use the Gay-Lussac equation:

As, P₁/T₁ = P₂/T₂

Given P1= 0.8 , T1= 127°

and T2= 27°

Now, (0.8)/(127+273) = (P₂)/(27+273)

We get, P₂ = 0.6 atm

The pressure of this sample at 27° c and  at same volume is 0.6 atm.

To know more about Gay-Lussac equation, refer

https://brainly.com/question/8350750

#SPJ4

Answer:

A. it contains a lot of matter

The point that we can see in the graph from 0 s to 2s is the point of constant velocity.

A horizontal line on a velocity-time graph indicates the location of the point of constant velocity. On the graph, a horizontal line denotes that the object's velocity was constant during that time.

Keep in mind that a velocity-time graph shows how an object's velocity changes over time. An object is said to be travelling at a constant speed if a horizontal line shows that it is doing so while maintaining its direction and speed.

Learn more about velocity time graph:https://brainly.com/question/29151097

#SPJ1

The total charge that flows while the battery is being charged is approximately 193,939.39 Coulombs.

To calculate the total charge that flows while the battery is being charged, we can use the relationship between electrical energy, potential difference, and charge.

The electrical energy (E) stored in the battery is given as 64 mega Jules (64 MJ). The potential difference (V) provided by the battery is 330 volts. We know that the energy (E) is equal to the product of the potential difference (V) and the charge (Q):

E = V * Q

Since the charging process is 100% efficient, all the electrical energy supplied is stored in the battery. Therefore, we can rearrange the equation to solve for the charge (Q):

Q = E / V

Substituting the given values, we have:

Q = 64 MJ / 330 V

To perform the calculation, we need to convert mega Jules (MJ) to joules (J) since the SI unit of energy is joules. One mega Joule is equal to 1 million joules:

Q = (64 * 10^6 J) / 330 V

Calculating the division:

Q ≈ 193,939.39 Coulombs

Therefore, the total charge that flows while the battery is being charged is approximately 193,939.39 Coulombs.

This value represents the quantity of electric charge transferred during the charging process, and it indicates the amount of electricity that enters the battery.

For more such questions on charge visit:

https://brainly.com/question/18102056

#SPJ8

Answer:

See the answer below

Explanation:

The statement that could best explain how the offspring could inherit a trait not shown in the phenotypes of either parent would be that both parents are heterozygous for the red color.

Heterozygous parents can produce offspring with a phenotype that is distinctly different from that of either parent if the recessive alleles come together during random fusion of gametes.

Let us assume that the red color (R) in the New Hampshire chicken is the dominant one and the recessive one is the golden color (r). The genotype of the heterozygous parents would be Rr.

        Rr    x    Rr

     RR   Rr   Rr   rr

There is a probability (1/4) of producing a golden color chicken (rr), a trait that is not displayed in either of the parents.

Adding deionized water to the Erlenmeyer flask will dilute the concentration of HCl in the solution. When deionized water is added to the flask, it increases the volume of the solution without changing the amount of HCl present. As a result, the concentration of HCl will decrease.

The concentration of a solution is defined as the amount of solute (in this case, HCl) dissolved in a given volume of solvent (in this case, deionized water). By adding more deionized water, the total volume of the solution increases, but the amount of HCl remains the same. Therefore, the concentration of HCl will decrease.

The effect of dilution on the concentration of a solution is described by the equation C1V1 = C2V2, where C1 and V1 represent the initial concentration and volume, and C2 and V2 represent the final concentration and volume. In this case, the initial concentration of HCl will be higher before adding deionized water, and the final concentration will be lower after adding deionized water.

In conclusion, adding deionized water to the Erlenmeyer flask will decrease the concentration of HCl, resulting in a skewed experimental [HCl].

To know more about HCl refer to:

https://brainly.com/question/27576431

#SPJ11

The empirical formula is the simplest formula for a compound which is defined as the ratio of subscripts of smallest possible whole number of the elements present in the formula. It is also known as the simplest formula.

write a balanced equation for the reaction between tantalum pentachloride and water?

To learn more about chlorine  refers to:

https://brainly.com/question/29794366

#SPJ4

The waste from the human body is removed in the form of urea and nitrogenous wastes. The urine comprises 95 % water and 5% waste ions formed via glomerular filtration, reabsorption, and secretion.

Waste of the human body can be described as excreted from the human body, especially in the form of urine. Our kidneys play important in the process of excretion. Components of normal human urine include 95 % water and 5 percent solid wastes.

Urine is formed in the nephron, which is the structural and functional unit of the kidney. Urine formation is carried out in three phases Glomerular filtration, Reabsorption, and Secretion.

Glomerular filtration takes place in the glomerulus where blood is filtered. Around 99 percent of the filtrate is reabsorbed by the renal tubules known as reabsorption. The secreted ions are combined with the filtrate and form urine.

Learn more about urinary system, here:

https://brainly.com/question/28178147

#SPJ1

To neutralize the mixture of 0.160 M HNO3 and 0.100 M KOH, 67.0 mL of 2.00 M HCl must be added.

The balanced chemical equation for the neutralization reaction between HNO3 and KOH is:

HNO3 + KOH → KNO3 + H2O

From the balanced equation, we can see that one mole of HNO3 reacts with one mole of KOH to form one mole of water. Therefore, the number of moles of HNO3 present in the solution is given by:

moles of HNO3 = 0.160 M × 0.100 L = 0.016 mol

Similarly, the number of moles of KOH present in the solution is given by:

moles of KOH = 0.100 M × 0.400 L = 0.040 mol

Since the reaction is a 1:1 stoichiometric ratio, the number of moles of HCl required to neutralize the mixture is also 0.016 mol.

To calculate the volume of 2.00 M HCl required, we can use the following formula:

moles of HCl = Molarity of HCl × volume of HCl

0.016 mol = 2.00 M × volume of HCl

volume of HCl = 0.008 L = 8.0 mL

Therefore, 67.0 mL of 2.00 M HCl must be added to neutralize the mixture of 0.160 M HNO3 and 0.100 M KOH.

Visit here to learn more about neutralize:

brainly.com/question/23008798

#SPJ11

Answer:High-purity chemicals are all-the-more important during the manufacturing process because chemicals are often used in bulk. ... In plastics, for example, an impure chemical substrate can produce an end-product that's too brittle to use. In pharmaceuticals, one impure component can render a drug dangerous

Explanation:

9× 10^15 Hz and this frequency belongs to the Ultraviolet rays having a wavelength of 3.33x10-8 m

Velocity= frequency× wavelength

frequency= Velocity/ wavelength

frequency= 3*10^8/ 3.33 * 10^-8

frequency= 0.9* 10^16

frequency= 9* 10^15 Hz

Frequency in physics refers to both the number of cycles or vibrations that a body in periodic motion experiences in a unit of time as well as the number of waves that pass in a unit time. When a body in periodic motion moves through a series of events or positions and then returns to its initial state, it is said to have completed one cycle or one vibration. The frequency is the reciprocal of the period, or time interval; in other words, frequency = 1/period = 1. (time interval).

To know more about  frequency   visit : https://brainly.com/question/13003361

#SPJ9

You have a large amount of 7.00 mm stock solution you need 1.80 ll of 3.00 mm solution for an experiment then the desired solution without wasting any stock solution is 0.77L

Stock solution is the concentrated solution that usually diluted with water

Here given data is

Stock solution M = 7.00 mm

Stock solution V = 1.80 l

M = 3.00 mm

Where M₁ =  7.00 mm

M₂ = 3.00 mm

V₁= 1.80 l

We have calculated the volume = ?

Then the formula is

M₁V₁ = M₂V₂

7.00 mm× 1.80 l = 3.00 mm×V₂

V₂ = 3.00 mm/7.00 mm× 1.80 l

V₂ = 0.77L

0.77L prepare the desired solution without wasting any stock solution

Know more about solution

https://brainly.com/question/14825511

#SPJ4

The main difference between substrate level phosphorylation and oxidative phosphorylation is that substrate level phosphorylation is a direct phosphorylation of ADP with a phosphate group by using the energy obtained from a coupled reaction whereas oxidative phosphorylation is the production of ATP from the oxidized ...

Correct option: If a water source has a hundredfold decrease in H⁺ concentration from 5.5, so the pH will increase by 2 units i.e. 7.5.

The term pH, which originally stood for "potential of hydrogen" (or "power of hydrogen"), is used in chemistry to describe how acidic or basic an aqueous solution is. The pH scale measures the difference between basic and alkaline solutions and acidic solutions (solutions with higher amounts of H+ ions). The pH scale is logarithmic and inversely proportional to the hydrogen ion concentration in the solution. Acidic solutions have a pH under 7, while basic solutions have a pH over 7, at a temperature of 25 °C (77 °F). In this temperature range, neutral solutions have a pH of 7. (e.g. pure water). If the temperature rises above 25 °C, the pH neutral value falls below 7, and vice versa.

To know more about pH, visit:

https://brainly.com/question/15289741

#SPJ4

Answer:

Density should be 8.5

Explanation:

When you subtract 17.2-10.0 for water displacement you get 7.2 which is the volume and you divide it by 15.7 so your equation will be 15.7/7.2 = 8.5

Answer:

4.1

Explanation:

Answer:

c. A nucleus with a large mass will be on the left side, and there will be neutrons in the equation.

Explanation:

In the process of nuclear fission, a neutron collides with a nucleus with a large mass and that nucleus splits into isotopes (substances that have the same atomic number that the original substance, but different weight number).

In this case, the nucleus with a large mass is U and n represents the neutrons.

In soil science, the term used to describe the cohesion of soil particles is "cohesion."

Cohesion refers to the internal molecular attraction or sticking together of soil particles. It is one of the key factors influencing the mechanical behavior and strength of soils.

Soil is composed of individual particles, including sand, silt, clay, and organic matter. Cohesion is the force that holds these particles together, allowing them to form aggregates or clumps. The cohesion between soil particles arises from various mechanisms, including electrostatic forces, Van der Waals forces, and surface tension.

Electrostatic forces: Soil particles, especially clay particles, carry electric charges on their surfaces. These charges can be either positive or negative. When particles with opposite charges come close to each other, electrostatic attraction occurs, leading to cohesion between the particles.

Van der Waals forces: Van der Waals forces are weak attractive forces between molecules or atoms. In soil, these forces contribute to the cohesion between adjacent particles. They arise due to temporary fluctuations in the electron cloud, resulting in an attractive force between particles.

Surface tension: Surface tension is the tendency of a liquid to minimize its surface area. In soils, water acts as a binding agent and contributes to cohesion between particles. Water molecules exhibit surface tension, allowing them to form thin films around soil particles and create cohesive forces between them.

So, cohesion is the term used in soil science to describe the sticking together or attraction between soil particles.

Learn more about surface tension here:

https://brainly.com/question/32667533

#SPJ11

The correct order of decreasing acidity for the given compounds is option F, which is 3142.  Acidity of a compound is determined by the strength of its conjugate base.

The stronger the conjugate base, the weaker the acid. In this case, all the given compounds have a carboxylic acid functional group, which is a strong acid. However, the strength of the acid is affected by the electronegativity of the substituents on the carbon atom. The more electronegative the substituent, the stronger the acid.

Therefore, CF3COOH (compound 3) is the strongest acid due to the presence of the highly electronegative CF3 group. CH3COOH (compound 1) is the next strongest acid due to the presence of the moderately electronegative CH3 group. CCI3COOH (compound 4) is weaker than CH3COOH due to the presence of the highly electronegative CCI3 group. Finally, CH3CH2OH (compound 2) is the weakest acid as it does not have any electronegative substituents.

Thus, the correct order of decreasing acidity is 3142 (option F).

To know more about  carboxylic acid refer to

https://brainly.com/question/31050542

#SPJ11

When calculating the straight average or arithmetic average, all numbers are treated equally and are weighted equally. Weighted averaging, however, assigns a weight that predetermines the relative importance of each data point. Weighted averages are most often calculated to even out the frequency of values ​​in a data set.

What are straight average and weighted average ?

The straight average is calculated by adding the earned totals and dividing by the possible totals using points or percentages for the current grading period assignment. The weighted average assigns an importance (or weight) to each number. Weighted averages are more useful than regular averages because they provide more nuance. Less important data are given less weight, so more important data have more impact on results

To know about straight average and weighted average from the link

https://brainly.com/question/18554478

#SPJ13

The concentration of the original NaOH solution is 0.459 M.

To find the concentration of the original NaOH solution, we can use the concept of stoichiometry and the balanced chemical equation for the neutralization reaction between NaOH and HBr.

The balanced chemical equation is:

NaOH + HBr → NaBr + H2O

From the balanced equation, we can see that the stoichiometric ratio between NaOH and HBr is 1:1. This means that for every 1 mole of NaOH, we need 1 mole of HBr to neutralize it.

First, let's calculate the number of moles of HBr used:

Moles of HBr = Volume of HBr solution (in L) * Concentration of HBr (in mol/L)

Moles of HBr = 0.0459 L * 0.200 mol/L

Moles of HBr = 0.00918 mol

Since the stoichiometric ratio is 1:1, the number of moles of NaOH in the solution is also 0.00918 mol.

Next, we calculate the concentration of NaOH:

Concentration of NaOH = Moles of NaOH / Volume of NaOH solution (in L)

Concentration of NaOH = 0.00918 mol / 0.0200 L

Concentration of NaOH = 0.459 M

Therefore, the concentration of the original NaOH solution is 0.459 M.

To know more about concentration, refer here:

https://brainly.com/question/29573676#

#SPJ11

The pH of the solution with a molarity of 3.8 × \(10^-^3\) is approximately 2.42. To calculate the pH, a scientific calculator or logarithmic tables is used. By evaluating the expression, the pH of the solution is approximately 2.42.

To determine the pH of a solution with a molarity of 3.8 × \(10^-^3\)), one need to use the equation relating pH and the concentration of hydrogen ions (H+):

pH = -log[H+]

In this case, the concentration of hydrogen ions ([H+]) is equal to the molarity of the solution.

Substituting the given molarity value into the equation, one can have:

pH = -log(3.8 × \(10^-^3\)))

So, to calculate the pH, one can use a scientific calculator or logarithmic tables. By evaluating the expression, the pH of the solution is approximately 2.42.

Learn more about pH here

https://brainly.com/question/19243610

#SPJ1

Answer:

Number of energy levels that the element has.

Explanation:

The period number (n) is the outer energy level that is occupied by electrons. The period number that an element is in, is the number of energy levels that the element has.