Answer:
a
Explanation:
bcz mre than that they will be affected
\(\triangleright\)\(\overline{\qquad{\qquad{\qquad{\qquad{\qquad{\qquad{\qquad{\qquad}}}}}}}}\)\(\triangleleft\)
\(\boldsymbol{Answer.}\)
\(\bullet\) Option [A].
\(\triangleright\)\(\overline{\qquad{\qquad{\qquad{\qquad{\qquad{\qquad{\qquad}}}}}}}\) \(\triangleleft\)
\(\boldsymbol{Explanation.}\)
Hi student! Let me help you out on this question.
The approximate audible range for humans is.
\(\boldsymbol{20-20,000\:Hertz\,(Hz)}\).
Humans can't hear sounds lower than 20 Hz or higher than 20,000 Hz.
\(\boldsymbol{\therefore,\:Option\:\big[A\big]\,is\,correct.}\)
Hope that this helped you out! Best wishes!
\(\star\triangleright\boldsymbol{Reach\:far.\,Aim\,high.\,Dream\,big.}\triangleleft\star\)
\(\ddagger\it{-Greetings!-}\dagger\)
_______________________
Help please!!!!! How does ozone form from vehicle exhaust?
Answer: NOx and VOC combine chemically with oxygen to form ozone
Explanation:
Jenny and Fred both play a long note on their trombones. A stationary observer hears the sound increasing and decreasing repeatedly in loudness. Which of these must be true?
A.The sound waves from the two trombones have slightly different frequencies.
B. The sound waves from the two trombones have the same frequency.
C. The sound waves from the two trombones have slightly different amplitudes.
D. The sound waves from the two trombones have the same wavelength.
E. The sound waves from the two trombones have slightly different velocities.
Answer:
A.The sound waves from the two trombones have slightly different frequencies.
Explanation:
This is because, a difference in frequency of waves from two different sources would result in either constructive or destructive interference of the waves. Thereby, causing the observer to hear the sound increasing or decreasing.
Answer:
A.The sound waves from the two trombones have slightly different frequencies.
how much longer woukd it take to travel a distance of 600km at a speed of 60km/hr-1
Answer:
10hr
Explanation:
To get time of journey, we need calculate distance/speed. distance is 600, speed is 60, so answer is 600/60=10(hours)
Hope that this was helpful.
urgent please
A mason dropped a block of weight 30N onto a trolley of mass 6kg when it was moving at a velocity of 2m/s. Determine the velocity of the trolley thereafter if the block remains on it. (2marks) (Take g = 10N/kg)
The velocity of the trolley system with the block in it is 1.33 m/s.
Weight of the block, W = 30 N
Mass of the block, m = W/g
m = 30/10 = 3 kg
Mass of the trolley, M = 6 kg
Initial velocity of the trolley, u = 2 m/s
According to law of conservation of momentum,
In an isolated system, when two objects collide, the combined momentum before and after the collision is constant. Due to the fact that the momentum gained by one object equals the momentum lost by another, this occurs.
So, the momentum of the trolley system before and after dropping the block to it are equal.
Mu = (M + m)v
Therefore, the velocity of the trolley system with the block in it,
v = Mu/(M + m)
v = 6 x 2/(6 + 3)
v = 12/9
v = 1.33 m/s
To learn more about law of conservation of momentum, click:
https://brainly.com/question/1113396
#SPJ1
Determine la inercia rotacional de una varilla de 4 m de largo y 2 Kg de mesa si su eje de rotación esta situado a la mitad de la varilla.
Answer:
I = 2.667 kg m²
Explanation:
The moment of inertia of a body can be calculated by the expression
I = ∫ L² dm
For high symmetry bodies the expressions of the moment of inertia are tabulated, for a rod with its axis of rotation at its midpoint it is
I = \(\frac{1}{12}\) m L²
let's calculate
I = \(\frac{1}{12}\) 2 4²
I = 2.667 kg m²
Henri becquerel shared a nobel prize for his work in discovering what?.
A projectile is shot horizontally from the edge of a cliff, 400 m above the ground. The projectile is traveling horizontally at 65 m/s the moment it leaves the cannon.
What is the initial vertical velocity of the projectile?
Determine the time taken by the projectile to hit the ground.
How far does the projectile land from the base of cliff?
Find the vertical component of the velocity just before the projectile hits the ground.
What is the magnitude of the final vector velocity the instant before it hits the ground?
What is the direction of the final vector velocity the instant before it hits the ground?
Answer:
a) \(v_{oy}\) = 0, b) t = 9.035 s, c) x = 587.275 m, d) v_y = -88.54 m / s,
e) v = 109.84 m / s, f) θ = -53.7º
Explanation:
This exercise is a projectile launch
a) as the projectile is launched horizontally, its initial vertical velocity is zero
\(v_{oy}\) = 0
b) let's use the relation
y = y₀ + v_{oy} t - ½ g t²
when reaching the ground y = 0 and the initial vertical velocity is v_{oy}=0
0 = y₀ + 0 - ½ g t²
t = \(\sqrt{ \frac{2 v_o}{g} }\)
t = \(\sqrt{ \frac{ 2 \ 400 }{ 9.8} }\)
t = 9.035 s
c) the horizontal distance is
x = v₀ₓ t
x = 65 9.035
x = 587.275 m
d) the vertical speed when touching the ground
v_y = \(v_{oy}\) -gt
v_y = 0 - 9.8 9.035
v_y = -88.54 m / s
the negative sign indicates that the velocity is directed downwards
e) the velocity at this point
v = \(\sqrt{ v_x^2 + v_y^2}\)
v = \(\sqrt{65^2 + 88.54^2}\)
v = 109.84 m / s
f) the direction of the velocity
let's use trigonometry
tan θ = v_y / vₓ
θ = tan⁻¹1 v_y / vₓ
θ = tan⁻¹ (-88.54 / 65)
θ = -53.7º
this angle is measured clockwise
What is the 13th Amendment in simple terms?
The 13th Amendment to the United States Constitution provides that "Neither slavery nor involuntary servitude, except as a punishment for crime whereof the party shall have been duly convicted, shall exist within the United States, or any place subject to their jurisdiction."
In other words:
Nobody can be a slave or work against their will in any place controlled by the USA, except if they're sentenced to jail or prison for a crime.
The 13th amendment, which was adopted by Congress on Jan 31, 1865, and ratified by the states on December 6, 1865, declared slavery to be illegal throughout the country and in any location under their jurisdiction. It also states that "Neither “ neither slavery nor involuntary, except as a punishment for offense whereof the group shall have indeed been duly found guilty, shall exist."
What does it mean to "amend"?An amendment can change or add to the terms of a contract or other legal document. A latest arrival or alteration to a document that substantially preserves its integrity is called an amendment.
What else would be considered an amendment?Common synonyms for amend include correct, emend, rectify, redress, reform, remedy, and revise. All of these words pertain to "setting right what's genuinely wrong," but only amend, reform, and revise suggest improvement via corrective revisions, with amend often denoting minor changes alter a law.
To know more about Amendment visit:
https://brainly.com/question/12124635
#SPJ4
A 3.00 kg box sliding west at 2.00 m/s makes an inelastic collision with a second box sliding 1.50 m/s east. Afterwards, they both come to a stop. What was the mass of the second box?
Let west be the negative direction, and east be positive. Then the total momentum of the system is conserved such that
(3.00 kg) (-2.00 m/s) + m (1.50 m/s) = 0
Solve for m :
m = (3.00 kg) (2.00 m/s) / (1.50 m/s) = 4.00 kg
A 19 kW electric heater operates at 360v. Find the current, resistance and energy (in joules & kW-h) generated in 50 minutes
The resistance is 6.84 ohms, the current is 52.78 A, and the amount of energy produced is 5,400,000 J, or 1.5 kWh.
How much electricity is used by a 3kW heater?Accordingly, a 3kW heater will consume 3kW (3000 watts) every hour and run about 43 pence*, or £3.43* for 8 hours. The operating costs will depend on the power rating (watts/kWs); the higher the watts, the more it will cost to operate. Visit Sust-it's Electric Heating Cost Calculator for a quick comparison.
To find the current:
I = P/V = 19,000 W / 360 V = 52.78 A
To find the resistance:
R = V²/P = (360 V)²/ 19,000 W = 6.84 ohms
To find the energy generated in joules:
E = P * t = 19,000 W * (50 min * 60 s/min) = 5,400,000 J
To find the energy generated in kW-h:
E_kWh = E / (3.6 * 10⁶ J/kWh) = 1.5 kWh
To know more about resistance visit:-
https://brainly.com/question/30799966
#SPJ1
Select the correct answer from each drop-down menu.
What causes atoms to form covalent bonds?
The number of
In a covalent bond, two atoms are held together by the attraction between
covalent bonds that an atom can form depends on the number of
in the atom.
Answer:
YES the first option
Explanation:
two atom are held together
Answer:
In a covalent bond, two atoms are held together by the attraction between each atom and the shared electrons. The number of covalent bonds that an atom can form depends on the number of valence electrons in the atom.
A truck is driving north at 35 miles per hour and passes a car going south at 40 miles per hour. What is the speed of the car from the truck driver's frame of reference?
calculate the wavelength of a wave if 5 complete waves occupy a length of 20m
The wavelength of the wave will be 4 meters. when 5 complete waves occupy a length of 20m.
What is wavelength?Wavelength is defined as the space between waves' crests, particularly between electromagnetic or sound wave points. A recurring event's frequency is measured by how many times it occurs in a unit of time. To underline the difference from spatial frequency, it is also occasionally referred to as temporal frequency.
There is an inverse relationship between the frequency and the wavelength of the waves as the wavelength increases the frequency decreases and if the wavelength decreases the frequency increases.
Given that a wave has 5 complete waves occupying a length of 20m. The wavelength of the wave will be calculated as below:-
λ = Distance / frequency
λ = 20 / 5
λ = 4 meters
Therefore, the wavelength of the wave will be 4 meters. when 5 complete waves occupy a length of 20m.
To know more about wavelength follow
https://brainly.com/question/6297363
#SPJ2
What is material strength to weight ratio?
Material strength to weight ratio refers to the amount of strength possessed by a material compared to its weight. It is used to evaluate a material's ability to endure loads while maintaining its lightweight.
Strength-to-weight ratio:
There are two methods to describe the strength-to-weight ratio of materials: specific strength and specific stiffness. Specific strength refers to a material's maximum strength divided by its density, whereas specific stiffness refers to a material's modulus of elasticity divided by its density.
In the aerospace industry, the material strength-to-weight ratio is crucial since it determines the efficiency of aircraft, rockets, and spacecraft. Materials with high strength-to-weight ratios, such as carbon fiber composites, are frequently used to create strong, lightweight components for these purposes, resulting in a reduction in fuel consumption and greater overall efficiency.
To know more about strength-to-weight ratio, visit:
https://brainly.com/question/12975641
#SPJ11
PLEASE ANSWER QUICKLY
Which of the following best describes the make up of a star?
Answers
•a collection of particles held together by gravity
•a body in orbit
•a cloud of dust and gas
•a luminous ball of plasma
Answer:
a luminous ball of plasma
in the us, more electricity is generated from ____ than from any other source.
Natural gas was the largest source about 38% of U.S. electricity generation in 2021. Natural gas is used in steam turbines and gas turbines to generate electricity.
Tyler wants to learn about the types of insects in the soil near his house. Which would be a benefit of carrying out a descriptive investigation?
He could collect a large amount of data for a low cost.
He could control most of the variables affecting the insects.
He would get results that might change after the investigation.
He would be able to study cause-and-effect relationships.
Tyler wants to learn about the types of insects in the soil near his house. He could collect a large amount of data for a low cost.
Types of investigation :Descriptive investigation, comparative investigation, and experimental investigation are the three types of investigations that scientists use to research and create explanations for events in nature.
What is the benefit of carrying out a descriptive investigation?Providing descriptions is the aim of descriptive research. It should describe phenomena in a factual, precise, and organized manner without attempting to infer their causes. It does not provide an explanation for the how, when, or reasons why a specific phenomenon occurred.
Methods of investigation :In various situations, scientists employ a variety of investigational techniques. These techniques include fair testing, identifying and classifying, modeling, pattern seeking, and researching (in no particular order). According to research, fair testing dominates science instruction.
To know more about comparative investigation :
https://brainly.com/question/12042816
#SPJ9
An acceptable charging circuit voltage on a 12 volt system is
13.5 to 15 volts
13.5 to 16 volts
13.5 to 17 volts
13.5 to 18 volts
An acceptable charging circuit voltage for a 12-volt system typically ranges from 13.5 to 15 volts. The correct option is A.
This voltage range is crucial for maintaining the battery's health and ensuring that it operates efficiently. The charging circuit, which consists of the alternator, voltage regulator, and wiring, maintains the battery's charge and provides electrical power to the vehicle's systems.
The alternator, driven by the engine, generates electrical power, while the voltage regulator controls the output voltage to prevent overcharging or undercharging.
When the engine is running, the charging circuit must supply enough voltage to recharge the battery after starting and provide power to the vehicle's electrical systems without overloading the battery.
A voltage range of 13.5 to 15 volts ensures that the 12-volt battery is sufficiently charged, and its capacity is maintained at an optimal level.
Overcharging (above 15 volts) can cause excessive heat, leading to battery damage or failure, while undercharging (below 13.5 volts) can result in reduced battery life and inadequate power for the vehicle's electrical systems.
To summarize, for a 12-volt system, the acceptable charging circuit voltage is 13.5 to 15 volts, as this range allows for efficient battery charging, optimal performance, and extended battery life.
to know more about battery charging refer here:
https://brainly.com/question/4105309#
#SPJ11
the other side of the pivot an adult pushes straight down on the teeter totter with a force of 95 N. In which
direction does the teeter totter rotate if the adult applies the force at a distance of 2m from the pivot?
A 5.00 m long diving board with a mass of 6.6 kg is supported by two pillars. One pillar is at the left end of the
diving board, as shown, and the other is 1.50 m away. Find the forces exerted by the pillars when a 90.0 kg diver
stands at the far end of the board
The forces exerted by the pillars when a 90.0 kg diver stands at the far end of a 5.00 m long diving board with a mass of 6.6 kg supported by two pillars, one at the left end of the diving board, and the other 1.50 m away are 512 N and 490 N. Here options B and D are correct.
The answer to the first question is B) Counterclockwise. This is because the force applied by the adult is not directly over the pivot point, so it creates a torque that causes the teeter-totter to rotate in the counterclockwise direction.
To answer the second question, we can use the principle of torque equilibrium, which states that the sum of the torques acting on an object must be zero for it to be in rotational equilibrium. In this case, we can consider the diving board and the diver as a system.
When the diver stands at the far end of the board, the board experiences a torque due to the weight of the diver, which is given by:
τ = F × d
where F is the weight of the diver, and d is the distance from the pivot point to the point where the weight acts. Since the weight of the diver is acting downwards, the torque is acting in the clockwise direction.
At the same time, the two pillars are exerting forces on the board to support its weight and the weight of the diver. Let's call the force exerted by the pillar at the left end of the board \(F_1\), and the force exerted by the pillar 1.50 m away \(F_2\). Since the board is in static equilibrium, the sum of the forces acting on it must be zero. This gives us:
\($F_1 + F_2 - F_g = 0$\)
where \(F_g\) is the weight of the board, including the weight of the diver We can solve for \(F_1\) and \(F_2\) by considering the torque equilibrium equation:
\($\tau_1 + \tau_2 - \tau_g = 0$\)
\($\tau_1 = F_1 \times 0 = 0$\)
\($\tau_2 = F_2 \times 1.50 \text{ m}$\)
Substituting these values and the torque due to the weight of the board and the diver into the torque equilibrium equation, we get:
\($F_2 \times 1.50 \text{ m} - (90.0 \text{ kg} + 6.6 \text{ kg}) \times 9.81 \text{ m/s}^2 \times 2.50 \text{ m} = 0$\)
Solving for F2, we get:
\($F_2 = \frac{(90.0 \text{ kg} + 6.6 \text{ kg}) \times 9.81 \text{ m/s}^2 \times 2.50 \text{ m}}{1.50 \text{ m}} = 512 \text{ N}$\)
Substituting this value of \(F_2\) into the equation for the sum of the forces, we get:
\($F_1 + 512 \text{ N} - (90.0 \text{ kg} + 6.6 \text{ kg}) \times 9.81 \text{ m/s}^2 = 0$\)
Solving for \(F_1\), we get:
\($F_1 = (90.0 \text{ kg} + 6.6 \text{ kg}) \times 9.81 \text{ m/s}^2 - 512 \text{ N} = 490 \text{ N}$\)
Therefore, the forces exerted by the pillars are 490 N and 512 N, which is option D) 512 N and 490 N.
To learn more about diving board
https://brainly.com/question/12013205
#SPJ4
Complete question:
Which direction does a teeter-totter rotate when an adult applies a force of 95 N at a distance of 2m from the pivot?
A) Clockwise
B) Counterclockwise
C) It does not rotate
D) Cannot be determined
What are the forces exerted by the pillars when a 90.0 kg diver stands at the far end of a 5.00 m long diving board with a mass of 6.6 kg supported by two pillars, one at the left end of the diving board, and the other 1.50 m away?
A) 675 N and 327 N
B) 327 N and 675 N
C) 490 N and 512 N
D) 512 N and 490 N
What causes trash islands to form
Answers:
Suface winds
Tropical storms
Ocean currents
Answer:
ocean currents
Explanation:
You have discovered that when the required rate of return on a bond you own fell by 0.5 percent from 9.7 percent to 9.2 percent, the fair present value rose from $945 to $970. The bond pays interest annually. What is the duration of this bond
The required rate of return on a bond fell by 0.5 percent from 9.7 percent to 9.2 percent, the fair present value rose from $945 to $970. The bond pays interest annually. The duration of the bond is approximately -0.026.
To calculate the duration of a bond, we need to use the formula
Duration = (ΔPV / PV) / Δy
Where
ΔPV is the change in present value (PV)
PV is the initial present value
Δy is the change in yield (required rate of return)
Given the information provided:
Initial PV = $945
New PV = $970
Initial yield = 9.7%
New yield = 9.2%
Calculate the change in present value:
ΔPV = New PV - Initial PV
ΔPV = $970 - $945
ΔPV = $25
Calculate the change in yield:
Δy = New yield - Initial yield
Δy = 9.2% - 9.7%
Δy = -0.5%
Now we can calculate the duration:
Duration = (ΔPV / PV) / Δy
Duration = ($25 / $945) / (-0.005)
Duration ≈ -0.026
The duration of the bond is approximately -0.026. Note that the duration can be negative if the change in yield and change in present value have opposite signs.
To know more about duration here
https://brainly.com/question/14685088
#SPJ4
Which two factors affect the amount of force seen in objects?
Answer:thanks
Explanation:xixo
gv
Give details of aids in brief and explain how to protect yourself and prevent.
Answer:
(AIDS) is a chronic, potentially life-threatening condition caused by the human immunodeficiency virus (HIV). By damaging your immune system, HIV interferes with your body's ability to fight infection and disease. HIV is a sexually transmitted infection (STI). It can also be spread by contact with infected blood or from mother to child during pregnancy, childbirth or breast-feeding.
Explanation:
To help prevent the spread of HIV: 1. Use treatment as prevention (TasP). If you're living with HIV, taking HIV medication can keep your partner from becoming infected with the virus.
Hey you know these safety barriers you see on the freeway all the time? Explain the physics behind how the safety barriers help save lives during car accidents.
In the event of an accident or a car crash, road safety barriers and fences prevent automobiles from running off the road.
Which laws explain the physics behind the safety barriers and their use ?Newton's Three Laws of Physics can help explain what these safety barriers are and how they help to save lives during car accidents :
I. Unless acted upon by an imbalanced force, an object at rest will remain at rest, and an object at constant velocity will remain at constant velocity.
II. If an imbalanced force occurs, a mass will experience acceleration proportional to its magnitude.
III. When you apply a force to an object, you will feel a force that is equal in magnitude but opposite in direction.
What are the reasons for installing road safety barriers ?To protect and prevent out-of-control automobiles from entering other vehicles' lanes. As a result, the safety road barriers are installed in the middle of the road.To keep the automobiles from sliding down an incline. If there is a drop of 5 meters or more along the road, the road safety barriers should be put at one end of the road.To keep an out-of-control car from collapsing and colliding with a roadside obstacle. If there are numerous items along the road, such as large traffic signs, bridge piers, poles, and so on, safety road barriers should be built on one end of the road.Can learn more about safety barriers from https://brainly.com/question/17086354
#SPJ1
A block on the end of a spring is pulled to position x =A and released. Through what total distance does it travel in one full cycle of its motion?
(a) A/2
(b) A
(c) 2A
(d) 4A
The total distance traveled in one full cycle of simple harmonic motion is twice the amplitude (A) of the oscillation.
Hence, the correct option is C.
The total distance traveled by the block in one full cycle of its motion can be determined by analyzing the nature of simple harmonic motion.
In simple harmonic motion, the block oscillates back and forth around its equilibrium position. During one complete cycle, it moves from its initial position to one extreme position, then returns to the equilibrium position, and finally moves to the other extreme position before returning back to the equilibrium position again.
The total distance traveled in one full cycle of simple harmonic motion is twice the amplitude (A) of the oscillation. This is because the block travels a distance of A in one direction to reach the first extreme position, and then it travels the same distance of A in the opposite direction to reach the other extreme position.
Therefore, the correct option is (c) 2A.
Hence, the correct option is C.
To know more about distance here
https://brainly.com/question/14528269
#SPJ4
Do neutrons count as part of the atom's
mass?
no
yes
Answer:
Explanation:
Yes, the nucleus contains neutrons along with protons.
A person removes a 8.45 kg object from a shelf that is 1.82 m above the floor. They lower the item at a constant velocity to another shelf that is 0.835 m above the floor. What is the work done by the person on the object?
Answer:
81.6 J
Explanation:
let the acceleration due to gravity = 9.8 m/s/s
W = F • s
F = newtons of force
s = distance travelled
the force to carry a mass is equal to mass multiplied by the acceleration due to gravity. This is confirmed using Sir Issac Newtons second and third law stating that the force of an object is equal to its mass multiplied by its acceleration (F = m • a) and that every action has an equal and opposite reaction, respectively. This means that the force of the object is equal to 8.45kg • 9.8 m/s/s, or 82.81 newtons of force.
F = 82.81 N
To find the distance displaced, you simply subtract 0.835m from 1.82m, giving a value of 0.985m.
s = 0.985m
Finally, in order to find work, you multiply 82.81 N by 0.985m resulting in a work equal to 81.6 J, after being rounded due to match the significant digits of the question.
An ionized calcium atom has a charge of +2
elementary charges. If this ion is accelerated through
a potential difference of 2.0 x 103 volts, the ion's
change in kinetic energy will be
The change in the kinetic energy of the calcium ion's is 6.4 x 10⁻¹⁶ J.
Change in Kinetic energy of calcium atomThe change in the kinetic energy of the ion's which accelerated through the given potential difference is calculated as follows;
ΔK.E = qV
where;
ΔK.E is the change in kinetic energyq is the charge of the ionV is the potential differenceSubstitute the given parameters in the above equation and solve for change in kinetic energy.
ΔK.E = (2e)V
ΔK.E = (2 x 1.6 x 10⁻¹⁹) x (2.0 x 10³)
ΔK.E = 6.4 x 10⁻¹⁶ J
Thus, the change in the kinetic energy of the calcium ion's is 6.4 x 10⁻¹⁶ J.
Learn more about potential difference and kinetic energy here: https://brainly.com/question/18963960
what happened to the energy source at the center of a quasar?
At the center of a quasar is a supermassive black hole that is surrounded by a disc of gas and dust that is heated to incredibly high temperatures. This disc is the energy source of the quasar, as it emits large amounts of radiation and energy.
Over time, the energy source at the center of a quasar can diminish as the black hole consumes the surrounding material. As the material is consumed, the disc of gas and dust becomes smaller, which reduces the amount of energy that is being emitted.
This process can take millions or even billions of years, depending on the size of the black hole and the amount of material that is available. Eventually, the energy source of a quasar can completely run out, which causes the quasar to stop emitting radiation and energy.
At this point, the black hole will still exist, but it will no longer be surrounded by a disc of material that can provide energy. Instead, it will become dormant and will no longer be visible as a quasar.
To know more about black holes refer here:
https://brainly.com/question/27723143#
#SPJ11
what force on a 936kg elevator that is falling freely at 9.8 m/s^2
Answer:
9172.8 N
Explanation:
F = ma
F = (936 kg)(9.8 m/s^2)
F = 9172.8 N